Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.9 LAccepted-AOC VILL PO KOTA VIA PANAGARH BAZAR DIST BURDWAN WB PIN 713148 | BURDWAN | BURDWAN | WEST BENGAL | 713148 | L1 | Accepted-AOC Lowest rate quoted | |
| 2 | L2₹33.7 L+₹1.4 L (4.21%)Rejected-AOC | L2 | Rejected-AOC Higher rate quoted than L1 | |
| 3 | L3₹34.3 L+₹2.0 L (6.08%)Rejected-AOC | L3 | Rejected-AOC Higher rate quoted than L1 | |
| 4 | L4₹34.8 L+₹2.5 L (7.60%)Rejected-AOC VILL SANDIPUR PO DWARNARY DISTT PURBA MEDINIPUR KOLKATA 7134403 WB | KOLKATA | PURBA MEDINIPUR | WB | 7134403 | L4 | Rejected-AOC Higher rate quoted than L1 | |
| 5 | L5₹36.4 L+₹4.0 L (12.4%)Rejected-AOC | L5 | Rejected-AOC Higher rate quoted than L1 |
Tender Value
₹43.5 L
EMD Value
₹87,100
Closing Date
24 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE PANAGARH
GARRISON ENGINEER PANAGARH, MILITARY ENGINEER SERVICES, PO-PANAGARH, DIST-BURDWAN, WEST BENGAL, PIN-713420
All as per BOQ
2023_MES_582702_1
8400-929/E8
Open Tender
Civil Works
Works
180 days
PANAGARH
Class D and Category a (i) (Building)
6 documents required · 6 mandatory
₹500
GE PANAGARH
₹87,100
Yes
3 Apr 2023
24 Feb 2023
25 Mar 2023
24 Feb 2023
24 Mar 2023
10 Mar 2023
Amount
Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles removing rubbish off from the premises complete all as specified and directed.
Demolition of Concrete in ground floors and pavings n.exc 15 cm thickness (below or above ground level) removing rubbish off from the premises complete all as specified and directed.
M&L for fly ash brick straight or curved on plan.exc 6 mtr mean redious built in CM (1:6) complete all as specified and directed
Taking down cement plaster, any description on brick or stone walls and ceiling ,chajja, landing etc including racking of joints hacking for key scrubbing down with water etc removing rubbish off from the premises complete all as specified and directed.
M&L for 15mm thick rendering in CM (1:6) on internal surfaces of brick masonry wall finished even and smooth without using extra cement complete all as specified and directed
M&L for 5mm thick rendering in CM (1:3) on internal surfaces of brick masonry in ceilings finished even and smooth without using extra cement complete all as specified and directed
M&L for 15mm thick rendering in CM (1:4) mixed with water proofing compound on external surfaces of brick masonry wall finished even and fair complete all as specified and directed (Note: Water proofiing item to be paid separately)
Supply only Liquid water proofing compound complete all as specified and directed. (Make : Pidilite Industries/ Impermo/Snowcem India Ltd/Sika)
M&L for preparation of new plastered surfaces of wall and applying two coat oil bound distemper over a coat of alkali resistant primer complete all as specified and directed. (Make: M/s Tractor Acrylic Distemper of Asian/M/s Bison Acrylic Distemper of Berger, M/s No 1 Premium Acrylic Distemper of Shalimar).
M&L for preparation of new plastered surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).
M&L for completely removal of existing surface and applying Two coats of Oil bound destemper on wall surface over a coat of alkali resistant complete all as specified and directed. (Make: M/s Tractor Acrylic Distemper of Asian/M/s Bison Acrylic Distemper of Berger, M/s No 1 Premium Acrylic Distemper of Shalimar).
M&L for preparation of old plaster surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. (Make: M/s Apex Ultima of Asian/ Weather Coat all guard of Berger/Xtra Tough of Shalimar).
M&L for three coats of white washing on new ceiling/chajja surfaces including preparation of complete all as specified and directed.
M&L for two coats of white washing on old ceiling/chajja surfaces including preparation of old surface complete all as specified and directed.
Taking down chowkhats or frame n.exc 1.5 Sq. m each with shutter(s) (without taking off shutters from the frame), complete all as specified and directed.
Taking down chowkhats or frame exceeding 1.5 Sq. m but n.exc 4 Sq. m each with shutter(s) (without taking off shutters from the frame), complete all as specified and directed.
S&F 2nd class hard wood plain solid straight chowkhat and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and directed.
S&F Factory made 35 mm thick 2nd H.W plain framed panelled shutters( two panel) with lock rail and panel of 9mm thick B.W.P commercial ply . The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed.
S&F of 35mm th 2nd class hard wood, glazed & skeleton shutters, open rebated & prepared to receive glass, (two panel to receive wire gauge) gauge etc, eges of framing plain, chamfered as rounded fitted with cut and mitere beads for securing etc complete all as specified and directed
M&L for preparation of newly wooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
S&F 4mm thick sheet glass ordinary quality with oil putty in square n. exc. 0.5m in each pane complete all as specified and directed.
S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane complete all as specified and directed.
S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 extruded aluminium alloy with alvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.
S&F for 150 mm aluminium extruded handles, fabricated type anodised complete all as specified and directed
S&F for 150 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed
S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and slidibg bolts of extruded section or cast-aluminium alloy complete all as specified and directed.
S&F mild steel flat iron as in hold fast clamps small articles conforming to FE 290 GDE -E- 165 complete all as specified and directed.
M&L for PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in bed blocks for hold fast including necesssary formwork, kerb stones etc complete all as specified and directed
S&F floor door stopper of brass body 140 mm long and tongue with rubber shoes complete all as specified and directed.
Dismantling floor hearth or wall tilling including cement mortar bedding, removing rubbish off the premises for minor repairs to floor in patches complete all as specified and directed.
M&L for 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in levelling course finished even and fair for laying floor finishes etc complete all specified and directed
M&L for 50 mm thick PCC 1:2:4 type B2 wih nominal reinforcement using 40mm graded and finishing the surface even and fair complete all as specified and directed
M&L for machine cut kota stone slab flooring 20-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over cement screed and jointed over screed bed or bedding layer of mortar 20mm thick in CM (1:6) for laying floor finish complete all as specified and directed
M&L for coloured non skid joint free ceramic tiles 7 to 8 mm thick (Square/ Rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.38 sqm, in floors etc set and jointed in neat cement slurry over and including 15 mm thick screed bed or bedding layer in cement mortar (1:4).
Material and labour for glazed ceramic coloured tiles in vertical surfaces of size 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tiles over and including 10mm thick rendering in cement mortar 1:4, on brick or concrete sueface complete all as specified and directed.
M&L for 75 mm thick PCC type C-2 1:3:6 (using 40 mm gradded stone aggregate) finishing the as in Plinth protection surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in surface channels and drains complete all as specified and directed
M&L for PCC 1:3:6 type C1 using 20mm stone aggregate as in Coping and haunching etc finished even and smooth complete all as specified and directed
M&L for PCC 1:2:4 type B1 using 20mm stone aggregate as in Providing precast ce- ment concrete in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with ma sonry), string courses, copings kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, rackets, etc. (of any section indicated), with plain fair faces, including cham fers, weatherings, throat- ing etc. and setting in mortar complete with joints to match and set in CM (1:4) complete all as specified and directed
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed
M&L for PCC 1:5:10 type E2 (using 40mm graded stone aggregate) as in mass cocrete filling complete all as specified and directed
M&L for broken stone hardcore of guage n. exc 63mm, deposited, spread and levelled in layers n. exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F in repairs Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge complete all as specified and directed.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge etc complete all as specified and directed
S&F stainless steel of 25mm dia as in curtain rod including cutting and fixing in bracket complete all as specified and directed
S&F stainless steel fancy type bracket suitable for fixing of 25 mm dia curtain rods complete all as specified and directed.
Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 15 mm dia bore complete all as specified and directed.
S&F GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia bore complete all as specified and directed.
S&F GI tubing 20mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
S &F in repairs 125mm chromium plated shower roses with or without swivel joints, anysize, including fixing to steel pipe or union complete all as specified and directed.
S&F 15 mm bore Stop valves, chromium plated with long shank and cup concealed type cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed
S&F Vitreous China Squatting pan ‘Orissa’ pattern, size 580 X 440 mm, white, with integral foot rests and with ‘P’ or ‘S” trap, (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc and including provision of lime concrete bedding, complete all as specified and directed. (Make Cat part no.20042 of Hindware or equivalent make of parryware/Cera)
S&f vitreous china wash basin, counter type of size 450mm including necessary fittings such as wast coupling, brackets & rag bolts and waste pipe, complete all as specified and directed by Engineer in Charge
S&F 15mm bore piller taps cast copper alloy,with fancy heads,chromium plated,screwed down, fancy type high pressure, with or without lettred 'HOT or COLD' with long screwed sunk and fly nuts complete all as specified and directed.
S&F 15 mm bore stop valve cast copper alloy screwed down, high pressure, with crutch or but-ter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S&F PVC connection 15mm size PTMT nuts of length 600mm complete all as specified and directed.
S&F grating square 150mm size of PTMT (minimum weight 100 gms) complete all as specified and directed.
S&F 10 litre capacity PVC valveless, syphonic action type low level flushing cistern with all accessories complete fixed with WC including syphone pipe, PVC flushing pipe of size complete (with brackets) complete all as specified and directed. (Make: Hindware, Parryware, Commander (Slim Line)).
S&F bib taps cast copper alloy 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
Supply flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern complete all as specified and directed.
S&F 75mm PVC (SWR) floor trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.
S&F as in repair 75mm dia PVC pipe fixed to wall or laid in trenches set in cement mortar with and including MS clamps made out of flat iron of size 25mm x 3mm including nuts bolts etc complete all as specified and directed.
S&F PVC bends plain (any radius) for 75mm bore PVC pipes complete all as specified and directed.
M&L for demolition of Concrete (RCC) of any description and in any position not otherwise specifically provided for and removing rubbish off from the premises complete all as specified and directed
M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specifed and directed.
M&L for RCC Type B1 1:2:4 (20 mm graded aggregate) for chajjas and the like complete all as specifed and directed
M&L for Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar 15mm thick (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite (of any type) work complete as specified and directed
S&F Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specifed and directed.
S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete as specified and directed
S&F PVC bends 110 mm bore complete as specified and directed
Dismantaling (corrugated,semicorugated) sheet in roof covering complete as specified and directed.
M&L for pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete as specified and directed.
S&F 2mm thick fibre glass reinforced translucent corrugated sheeting matching with galvalume sheet with corrugations side lap fixed with coach screw and washer in roof, wall etc and with L-type or J-type or cranked hook bolts in lieu of screw complete as specified and directed
M&L for flat iron fillets (for securing wire mesh, CGI Sheets etc.), Hand rails, half round or other steel section including embeding in concrete and screwing etc, wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed
Dismantling wrought Iron or mild steel work of any description not otherwise provided for wind tie complete all as specified and directed.
S&F roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Fe-410-W (Gde-E-250) quality-A complete all as specified and directed
M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on newly steel surfaces of any description over 10cm in width or girth not otherwise described incl preparation of surfaces and complete all as specified and directed
M&L for Designer Chequered tile Endura or equivalent tiles 30cm x 30cm x 10mm thick, over & including 15 mm thick cement mortar (1:6) screed, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed
M&L for 12 mm thick Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed.
M&L for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main ody with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed
S&F UPVC Eco Drain pipe drainage sewaer system pipe bearing 160mm dia minimun 4mm thick including jointing with coupler, bend, tee as per site requirement complete laid in trenches or floors complete all as specified and directed. (Note: PCC haunching will be measured and paid seperately)
M&L for PCC 1:3:6 type C2 Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in complete all as specified and directed
Door closer hydraulically regulated, Aluminium (die cast) body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed
E/M PORTIONS M&L for point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
All as per item No 89.00 mentioned here-in-above but One 3 pin 5 Amps socket out let points on independent board complete all as specified and directed
All as per item No 89.00 mentioned here-in-above but 5 Amp socket on same board with other switches complete all as specified and directed.
M&L for wiring for socket out let on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 4.0 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FRLSH cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed. (Note: Quoted rate deemed to be included for necessary chasing/cutting and making good the surface)
S&F switch piano flush type, single pole , 5/6 Amps, one way complete all as specified and directed.
S&F switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified and directed.
S&F socket outlets 2 in 1, 3 pin, 5/6 Amps flush type230/240 V complete all as specified and as directed .( For Same Board only)
S&F switch socket combination 5 in 1 , 6 pin , (5/16 Amps ) flush type controlled by one switch complete all as specified and directed.
S&F ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed.
S&F stepped type electronic fan regulator flush type 240 Volts ISI marked complete all as specified .
S&F building security light fittings 25 watts, minimumm system lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as specified and directed.
S&F 22 W LED light fitting wall mounted batten 4'ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 22 watt,6500K including necessary connection complete all as specified and directed.
S&F Higher Wattage 30 W LED light fitting wall mounted batten 4'ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 30 watt,6500K including necessary connection complete all as specified and directed.
S&F mirror 9 W LED light fitting wall mounted batten 2ft , extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 9 watt , 6000K including necessary connection complete all as specified and directed.
S&F wall mounted type decorative light fitting 1 x 10W LED 6k 230V AC, 50Hz complete with all accessories complete all as specified and directed.
S&F submain wiring for AC, two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC conduit (ISI marked), concealed, including 6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed.
S&F Metal plug and socket with 25 Amps MCB and steel enclosure all as per specified and as directed by Engr-in- Charge.
S&F Vertical distribution board double door TPN 4 way with IP 43 multiphase outgoing suitable for mounting 80 Amps as incomer with Bus bars, Neutral links complete with all accessories complete all as specified and directed.
S&F epoxy powder coated sheet metal enclosure for DBs, Single door , Single pole and neutral 240 V, 2 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed.
S&F epoxy powder coated sheet metal enclosure for DBs, double door , Single pole and neutral 240 V, 8 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed.
S&F in repairs MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).
S&F in repairs MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).
S&F MCCB of 4 pole , 415volts of capacity 100 Amps with breaking capacity of 16 KA Fixed thermal and fixed magnetic setting including necessry connection complete all as specified and directed. (Note : Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).
M&L for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth wire electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion. (Note : (i) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost to the department. (ii) Testing to be carried out by the contractor in presence of Engr- in- Charge , entered in the eath testing register, prepared and to be maintained by the contractor & submited to Concerned JE E/M. (iii) T&P and testing instrument(Meger) to be provided by the contractor at own cost).
Taking down of AC ceiling fan of any sweep & any height and opening the fan and oiling, greasing and replacement of unserviceable accessories and servicing, complete overhauling and re-assembling and testing complete for efficient functioning and hanging it back in position including provn of 0.5 Sqmm copper flexible twin twisted cable (length n.exc 0.5 metre) from ceiling rose to fan as directed by the Engr-in-Charge.
M&L for painting of ceiling fans upto 1400mm sweep carefully, dismantling fan blades and paint with one coat of synthetic enamel paint including filling cavities with filler after cleaning all dust etc complete all as specified and directed.
S&F ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.
S&F Heavy Duty Metallic high speed Turbo force wall fan of 600 mm sweep size with stand complete all as specified and directed by Engr-in-Charge.
S&F ventilating exhaust fan 450 mm sweep 230 volt AC complete with louver and all accessories including cutting hole of suitable size, making good surface by doing plaster and applying two coat of distemper complete with fixing arrangement to wall connected with twin core twisted flexible copper conductor (23/.0076) of suitable size all as directed.
Supply, laying / fixing / connecting, testing and commissioning of 35 Sqmm x 3.5 core LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the following cross sectional area including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings / walls without cable duct) all as directed by the Engr-in-Charge for the following ratings (Note: Excavation,sand cushioning,brick will be measured and paid separtely).
Excavating in trenches, n.exc 1.5 m wide and n.exc 1.5 m in depth for laying of cables, pipes etc. and getting out including trimming the sides and forming bottom surfaces to required levels in soft/loose soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, and well ramming in layer n.exc 25 cm thick in soft/loose soil complete all as specified and directed.
Removing excavated material (soil) to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed.
M&L for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed . (Note : Punned thickness 18 cm shall only be considered for payment)
Supply and lay in trenches fly ash bricks, for cable protection all as specified and directed by the Engr-in-Charge.
S&F Pipes galvanized, 50 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement or specified.
subash chander bahl
M/S SWAPAN KUMAR MONDAL
UNIVERSAL TRADING
MS ROYAL CONSTRUCTION INDEX NO 158 2010 BKP
BHARAT CONSTRUCTION
Hooghly Construction Co.
S.P.S. SUPPLIERS
SINGH CONSTRUCTION
UNITED BUILDERS
ROY ENTERPRISE
M/S GLOBE ENTERPRISE
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .