Attending Repairs and Renewal of 50HP Pump ,20HP Blower at Cavery palam WTP and 30HP VT Pumpset at Cavery palam Raw water intakeWell at Mettur Municipality

30HP Raw water VT pumpset Removal of 30HP oil lubricated vertical turbine pump with motor at site of work including removing bolts and nuts of bed, cutting required shims , dismantling of bowl assembly, impellor shaft, line shaft, column pipes , head soft, discharge head, bearings, drive unit, delivery side pipes , suitable tappers ,valves and specials and relevant electrical cables with motor properly etc.

supply and fixing of suitable size bearings of DE and NDE side of motor with applying lithium based grease. (Motor Driven size bearing No. 6313 - Roller bearing - SKF motor Non - driven side bearing No.6310 - Ball bearing - SKF)

Supply and fixing of motor terminal and copper stud bolt and nut applying high quality Dr.Beck air drying insulating varnish for protect the winding and connection to the motor terminals checking winding resistance, IR value of stator core complete the rate after adjusting the old scrap etc.

Charges for 30HP( 2609Lpm x34M )head VT Pump by cleaning and Painting of all column pipes, oil tubes, bowls discharge tee complete by scraping with wire mesh and applying two coats of anti-corrosive black paint including cost of paint and labour

Supply and Fixing of the SS 410 line shafts-6 Nos by Machining to true size,threading at required sides cost include Labour and Maachineing charges

Supply and Fixing of the Bronze Bearings-6 Nos by Machining to true size,threading at required sides cost include Labour and Maachineing charges

Charges for Replacing of Damaged Sch 80 Shafts Enclosing Pipe as per Standard ,cleaning of bowls and reconditioning the inner portion of bowl by filling cast iron material using welding and grinding.

Re-erection of 30HP oil lubricated vertical turbine pump with motor at site of work including Assembling bolts and nuts of bed, with required shims , bowl assembly, impellor shaft, line shaft, column pipes , head soft, discharge head, bearings, drive unit, delivery side pipes , suitable tappers ,valves and specials and relevant electrical cables with motor properly etc.

50 HP PUMP at Cavery Plam WTP Removal of 1820Lpm x 68m HSC Pump from pumphouse and dismantling the pump rotating element bearing housing, wornout bearings, checknuts, sleeves, gun metal , impeller, damaged stainless steel shaft at workshop by using hydraulic mechanism arrangements for proper removing without damaging the gunmetal impeller.

Supply and fixing of SS 410 Sleeve-2 Nos ,SS 304 Shaft with Zero - Zero accuracy etc complete