Barbed Wire fencing for Ladies Hostel No1, Nursing Hostel and Aluminum jalli fencing to MS Qtr pond RIMS,Imphal.

Amount

Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

All kinds of soil.

Demolishing stone rubble masonry manually/by machanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per directionof Engineer-in-charge:

In cement mortar

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -

All work upto plinth level

1:4:8 (1 cem :4 c/sand :8 graded stone aggregate 40 mm nom size)

G.I barbed wire fencing 1.2 metre high(providing and fixing 1.2 metres high GI barbed wire fencing with 1.8m angle iron posts 40mmx40mmx6mm placed every 3 metres center to center founded in M15 grade cement concerte,0.6 metre below ground level, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with 9 horizontal lines and 2 diagonals interwoven with horizontal wires, fixed with GI staples,turn buckles etc complete as per clause 807).

Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required.

In grating, frames, guard bar, railing, brackets, gates and similar works.

Centering and shuttering including strutting, propping etc. and removal of form for:

Columns, Pillars, Piers, Abutments, Posts and Struts.

Fixed to openings / wooden frames with rawl plugs screws etc.

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:

Two or more coats on new work

Finishing walls with Acrylic Smooth exterior paint of required shade:

Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint

M/S L SHANTIKUMAR SINGH (BID ID -3263786)

M/S Y SOMORJIT SINGH (BID ID -3263769)