Karnataka

AOC

Works

Buildings

Construction of Samudaya Bhavan near Sri Arooda Ashram at Asangihal Village in Sindagi Constituency

Public Works Department

PWD Division Office Vijayapura | Karnataka

Amount: ₹20.7 LCloses: 5 Feb 2026Closed

Timeline

Published20 Jan 2026
Closed5 Feb 2026
Awarded—

Bids

1 Bid5 Feb 2026

#	Company	Amount	Status
1	BALUNDAGII CONSTRUCTION ₹21.1 Laccepted-aoc	₹21.1 L	accepted-aoc

Tender Value

₹20.7 L

EMD Value

₹25,000

Closing Date

5 Feb 2026, 10:00 pmClosed

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

C S POLICE PATIL

Mobile Number

Work Description

Construction of Samudaya Bhavan near Sri Arooda Ashram at Asangihal Village in Sindagi Constituency (ST)

Tender Information

Tender ID

PWD/2025-26/BD/WORK_INDENT31890

Reference Number

PWD/2025-26/BD/WORK_INDENT31890

Tender Type

Reserved

Product Category

Buildings

Form of Contract

Electronic Documents, First(One Cover)

Location

PWD Division Office Vijayapura

Source Website

Subscribe to view

Documents Required

9 documents required · 9 mandatory

Technical Bid

RequiredContracotrs KPWD Civil registration Certificate

RequiredAnnual Turn Over Certificate from 2020-21 to 2024-25

RequiredWork Done Certificate with Indent Number.

RequiredGST Registration

RequiredOngoing Work Details

RequiredAny other related Documents

RequiredUDIN form practicing Chartered Account is preferred

RequiredDomicile/Residential Certificate stayed a minimum of 10 years

RequiredReserved Category Caste Certificate should be uploaded

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by any State Government / Government of India /Union Territory.

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches at bidders end.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

Conditional tenders will not be accepted.

As per karnataka state government order LD/300/LET/2006 Bangalore dated 01-01-2007 and Govt letter No.PW/134/BMS /2007/dated 27-07-2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund.

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders.

All the documents to be uploaded shall be neatly scanned and the documents scanned shall be in original.

Any discrepancies observed in the documents uploaded by the tenderer the tender shall liable to rejected.

All the Formats prescribed in the bid documents shall be filled in complete manner. ( section 3 & 4 of the bid document ) and shall be uploaded properly, signed by Tenderer . Necessary Certificates shall be uploaded along with the formats wherever required. General documents Section can be used for this purpose.

Earnest Money Deposit will have to be in any one of the forms as per the instructions in the financial bid document and shall have to be valid for 45 days beyond the validity of the tender.

Tenderers are requested to read the Bid Documents before submission of their bid.

The Tenderer should submit proposed methodology and program of construction, backed with equipment and materials duly supported with broad calculations and quality management, plan, proposed to be adopted, justifying of execution and completion of the work as per technical specifications within the stipulated period of completion.

Department will not supply any materials.

The cost of the Tender form shall not be refundable.

The employer is not responsible for any delay in accessing E-Procurement Portal.

The Employer reserves the rights reject one or all tender without assigning any reasons.

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, PWD Dept Division Vijayapur during office hours on all working days. It may be noted that if any of the dates mentioned above happened next working day will holds good in lieu of the dates mentioned.

The contractor should employ only registered labours as per Govt. Circular No. PWD/198/BMS/2009/ Dated: 24-06-2009. As per EPF & MP act 1952 irrespect of of the employees Engaged by or through contractors, agencies and contractors shall have provident fund code no. & all the contract employees deployed by them are enrolled as members of provident fund.

Contractors should be Registered in KPWD and copy should be uploaded in E-portal Attested by the Gazzeted officers not below the rank of Executive Engineer.

GST shall be paid to the tendered amount seperately.

The Increase in G.S.T shall not be paid in the extended period of Contract for which the contractor alone is responsible for delay as detarmaind by the authority while granting the extension of time.

Tender invited only for eligible contractors registered under Karnataka Public Works Dept.

Work Completion/Execution Period : 6 Months.

Any deviation/error/mistake found in units of items,they should be read as in the unified SR 2023-24 and the rates shall be quoted accordingly

This Bid Document clause no 34.4 to be implemented as per Delegation of Power vide GO NO.PWD 423 FC-1 2018 Bangalore, Dated:24/09/2018

The Tenderer are should be present during opening of the tender and also submit the uploaded documents duly attested by the Gazetted Officer not below the Rank of Executive Engineer

The Earnest Money Deposit Rs. 25,000 shall be paid in full through E-payment Nationalised or Scheduled Bank in favor of Executive Engineer,PWD Vijayapur Division, Vijayapur.

Defect liability period-365 days (1 year)

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

The Tenderer shall obtain any civil construction work the workdone certificate from financial year 2020-21 to 2024-25 (25% of the Amount Put to Tender i.e., Rs. 5.18 Lakhs) in the prescribed format from the Competent Authority not below the rank of Executive Engieer(District Level Officer)and scan the Original Certificate and attach the scanned file to the Bid.

The Tenderer shall achieved in at least one financial years a minimum financial turnover from financial year 2020-21 to 2024-25 of Rs.20.73 Lakhs (not less than the estimated cost under this contract).

For Reserved contractors (SC/ST/CAT-1/CAT-2(A)) reservation category participate in the tender, the contractors should upload the domicile certificate stayed in KARNATAKA for minimum of 10 years issued by a competent authority / Tahsildar.

This Tender is invited for the Tenderers belonging to Scheduled Caste/Scheduled Tribe/Cat-1/Cat-2(a) category only & to claim this reservation Caste category certificate issued by the competent authority should be uploaded & should be submitted in original before tender opening.

If the Contractor is a firm, then all the partners or members of the firm shall belong to the Scheduled Caste /Scheduled Tribe/Cat-1/Cat-2(a) as the case may be.

In accordance with the notification of Government of Karnataka No. DPAL 22 SHASHANA 2016, Bengaluru dated 29-06-2017 and 17-07-2017 and as per the Finance Secretariat Notification No. FD 876 Exp-12-2017, Bengaluru, dated 15-09-2017, this work is reserved for Scheduled Caste/Scheduled Tribe/Cat-1/Cat-2(a) contractors (specified in the Name of work), and only Scheduled Caste/Scheduled Tribe/Cat-1/Cat-2(a) contractors shall have to participate in the tender. The Scheduled Caste/Scheduled Tribe/Cat-1/Cat-2(a) contractors participating in the tender should compulsorily furnish the Caste certificate and Domicile Certificate issued by a competent authority, failing which the tender is liable for rejection.

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, PWD Division Vijayapur during office hours on all working days. It may be noted that if any of the dates mentioned above happened next working day will holds good in lieu of the dates mentioned.

Fee & Financial Details

Tender Fee Amount

₹520

EMD Fee Amount

₹25,000

Important Dates

Last Activity

5 Feb 2026

Published

20 Jan 2026

Download Ends

4 Feb 2026

BOQ Preview

•

Construction of Samudaya Bhavan near Sri Arooda Ashram at Asangihal Village in Sindagi Constituency

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

•

Mechanical Means -

•

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm a...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...

•

Providing Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

•

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting Each deposited layer by ramming after watering with a lea...

•

Filling approved earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating Each deposited layer ...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Providing Brick work with common burnt clay Non Modular bricks of clasS designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse ...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to stee...

•

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement ...

•

Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size gra...

•

Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick ma- sonry surface backing including drilling necessary holes and the cost of bolt etc complete. Wedge expansion type

•

Fastener with t...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffoldin...

•

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and r...

•

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster with cement mortar 1:3 ...

•

Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of ...

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even an...

•

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and...

•

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remo...

•

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, ...

•

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint...

•

Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works including preparing the surface after ...

•

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt...

•

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...

•

Providing & fixing of 2.5 track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame...

•

Providing and fixing bright finished brass butt hinges with necessary screws

•

etc. complete : 125x85x5.5 mm (heavy type)

•

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.

•

Providing and fixing chromium plated brass handles of 100/125 mm with

•

necessary screws etc. complete

•

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc...

•

Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm

•

with suitable washers weighing not less than 33 gms

•

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and...

•

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat o...

•

supply and Installation of Multicell Standing Seam polycarbonate panels having flux 7.0 as per EN 16153 & EN ISO 10077-2. For min joints, panel shall be 1000 - 1200 mm wide with standing seam on both...

•

Electrification works

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirming to...

•

Medium point above 3Mtr up to 6Mtr from tapping point to out let via switch

•

Long point above 6Mtr up to 10Mtr from tapping point to out let via switch

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

•

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

•

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•