SPECIAL REPAIR TO MAIN ENTRANCE AND ASSOCIATED AREAS AT HQGNA UNDER GE GOMANTAK VASCO

Amount

Taking down cement plaster of any description including racking out joints, hacking for key, scrubbing down with water, etc all as specified and as directed.

Material and labour for rendering cement plaster 15 mm thick in cement mortar 1:6 on fair faces of brick/concrete faces finished even and smooth without using extra cement all as specified and as directed.

Material & Labour for providing two coats of oil-bound distemper on new plastered surfaces over a coat of chalk whiting including necessary preparation to surfaces complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding, removing rubbish off the premises all as specified and as directed.

M & L for screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar 1:4 all as specified and as directed.

M & L for Glazed (Digital) coloured tiles in vertical surface 450x350x 7 (or) 350x250x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with colour tiles including 10mm thick cement plaster in cement mortar 1:4 for receiving tile all as specified and as directed.

M & L for Non-skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exc 0.6 sqm but n exc 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white cement or coloured cement to match all as specified and as directed.

M&L for Granite (of any type) 15-20mm work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms,urinal partition and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite all as specified and as directed.

Material and Labour for rounding to edges of stone slabs (one edge) as in steps, cooking platform and other similar situation all as specified and as directed.

Taking up or down 15 mm steel tubing and connections,fixed to wall /floor all as specified and as directed.

Supplying and laying of CPVC pipes 20 mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick Sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mmall all as specified and as directed.

S&F in repair Vitreous China wash down water closet pan (western type one piece) white all as specified and as directed.

S & F in repairs Vitreous China wash basin white, flat back, size 630x450mm excluding taps but including brackets all as specified and as directed.

S & F Pillar taps, 15mm dia fancy type , chromium plated all as specified and as directed.

S & F in repair CP stop cock/angle cock 15mm dia, fancy type all as specified and as directed.

S & F in repair CP Bib taps, 15mm dia,fancy type all as specified and as directed.

S & F in repair CP Towel Rail 600mm long all as specified and as directed.

S & F in repair PVC connections 15 mm size with PTMT nuts of length 600m all as specified and as directed.

S & F in repairs PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and as directed.

M & L for 40 mm dia high density polyethylene pipes laid in floor/trenches/ waste pipe of wash basin/spout pipe etc all as specified and as directed.

S & F Stainless steel soap dish standard size heavy duty, complete all as specified and as directed.

Dismantling of CI drain pipe, 100 mm dia, jointed in cement mortar and taking out trenches all as specified and as directed.

Dismantling of CI drain pipe, 75 mm dia, jointed in cement mortar and taking out trenches all as specified and as directed.

S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors all as specified and as directed.

S&F CP Tolilet paper holder with screws all as specified and as directed.

S&F in repairs CP Bidet spray ( Health faucet) with 1 metre extendable metal tube and holder all as specified and as directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and as directed.

S&F Wall Mixer 3-in-1 System with provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe all as specified and as directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles all as specified and as directed.

M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10cm in width and setting in mortar cement mortar (1:4), type C-5 all as specified and as directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exc.15 cm thickness below or above ground level all as specified and as directed.

M & L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, with grey cement and pigment set, jointed and pointed in neat cement slurry in floors over and including 20mm thick screed bed in cement mortar (1 : 4) complete all as specified and as directed.

M&L for sand cushioning under floors in foundation including watering and consolidation all as specified and as directed.

M&L for 60mm thick interlocking tiles (glossy finish) of M-30 grade laid, jointing and pointed in neat cement slurry over dry sand cushioning 30mm thick and edges shall be secured with PCC 1:2:4 type B-0 complete all as specified and as directed. Note : Sand cushioning shall be measured and paid separately.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) of rough finished flat surface all as specified and as directed.

M&L for TMT CRS bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

Demolition of Concrete (Reinforced) in Roof slab,beam and similar work (reinforcement cut as required to facilitate demolition) all as specified and as directed.

Material & Labour for RCC (Nominal Mix) M-15 using 20 mm graded stone aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and as directed.

Taking down chowkats or frames not exc. 1.5 sq.m. each with shutters without taking off shutters from the frames for ventilator all as specified and as directed.

Taking down chowkats or frames exc. 1.5 sq.m. n.exc 4 sqm each with shutters without taking off shutters from the frames for doors and windows all as specified and as directed.

Supply and Fix flush door shutters 30 mm thick,solid core construction with block board core and plywood face panels with decorative face veneers on both faces with lipping etc complete all as specified and as directed.

S & F Aluminium, anodised barrel tower bolts of extruded section and fixed complete length of bolt 150mm all as specified and as directed.

S&F in repair Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and as directed.

S&F stainless steel /brass Mortice latch with four levers on door complete all as specified and directed.

S & F Extruded anodised aluminium alloy handles, fabricated type, of 150mm long all as specified and as directed.

S & F stainless steel Butt hinges, 100mm long, medium weight, complete all as specified and as directed.

S&F powder coated aluminium frame/shutter for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S & F Extruded anodised aluminium alloy handles, fabricated type, of 125 mm long complete all as specified and as directed.

M & L for two coat of synthetic enamel paint over one coat of primer on new wooden surface including preparation of surface exc. 10 cm width and girth complete all as specified and as directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed .

S&F glazing with 4mm thick sheet glass ordinary type including rubber beadings/gaskets around glass panes complete all as specified and as directed .

S&F aluminium powder coated grill of 10mm thick including 'F'/'L' channel alround grill complete all as specified and as directed .

Dismantling of ceiling boards of any thickness,including cover fillets all as specified and as directed.

S&F hangers 6 mm dia G.I (upto 1200 mm lenght )adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I flat 40 X 3 mm size 60 mm long complete all as specified and as directed.

S&F anodised aluminium snap grid frame work for false ceiling size of grid 605 x 605 mm all as specified and as directed.

Supply and fixing PVC False ceiling consisting of 600mmx600mm,10mm(+or - 0.25) thick plain colour PVC sheet manufactured by an ISO-9001-2008 certified company,complete as per direction, manufacturer's specification & drawing

Dismantling boarding, any description, fixed in any position with nails and Battens for tiles, shingles etc, of any size including tilting fillets all as specified and as directed.

S&F WPC wall cladding size 125x20mm ,8 ft length wall nut colour wooden effect including necessary preparation on existing surface and polishing complete all as specified and as directed.

S&F in repair engineered wooden flooring of African teak 1200x152x13mm complete all as specified and as directed.

S&F PVC modular Kitchen cabinet base unit 8 No S.S baskets,01 nos S.S pullout with granite top and wall cabinet complete all as specified and as directed.

S&F shower enclosure with two fix glass 2.5mx2.0mx 8mm thick toughened glass and openable door outside complete all as specified and as directed.

Tara Construction

M/S. M M S ENTERPRISES

M/S jvsr constructions