Track lead junction box (TLJB)as per Drg. No. RST-11509 made from FRP material including brass bolts & hylam board sheet with terminals etc. The technical Specification are as follows :- (a) TLJB complete with cover to be in black/Red having approximate weight of 4.0 kg with L-262mm, W-212mm, and H-90mm and all the holes required for mounting on FRP stump (Vertical two for each FRP angle) HDPE pipe, cable etc. (b) Each TLJB shall have two Bakelite terminal block fitted horizontally, each Bakelite terminal block shall have two nickel chrome plate M10 brass terminal, 50mm long Along with each TLJB, nickel chrome plate brass links (two nos. of adequate strength for vertical linking of the terminals to be supplied.) ( C) HDPE pipe size 32/35mm, 380mm long along with two nuts for fixing on the TLJB hole. (d) The FRP stump for mounting the TLJB to be made of one meter long 30mm x 30mm x4mm angle (2 nos.) and 300mm long 30mm x30mmx4mm angle (1nos.) fixed at 50 mm from the bottom using galvanized nuts and bolts. The TLJB and the angles for stump should come along with holes on them for fixing using galvanized nuts and bolts of adequate strength to be supplied along with TLJB drawing No. 11509.

This item is not reserved to procure from any firm.

This item is classified as the item where there is sufficient local capacity and competition and where public procurement shall be done only from Class-I local suppliers under clause 3(a) of PPP-MII, order dated 04.06.2020 as per Rly Board letter no. 2015/RS(G)/779/5 (Vol.III) dated 22.06.2020. Rly Board letters in this regard enclosed as PDF RlyBdClass-ILocal. Therefore, in keeping with the Public Procurement (Preference to Make in India) order,2017 as amended, it has been found that there is sufficient local capacity and competition in supply of the tendered item of required quality and therefore public procurement of the item is restricted to Class-I local suppliers only and the vendors who do not qualify to be Class-I local suppliers should not quote in the tender as their offers shall not be considered for any ordering. In case any vendor who does not qualify to be a Class-I local supplier for the tendered item participates in the tender it does so at its own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor. It is mandatory for the tenderer to provide certification as per PPP-MII order 2017 as amended, in addition to other qualifying criteria of the tender.

The bidder agree to supply the tendered stores at the rates quoted by him in accordance with the IRS conditions of contract and special conditions and other conditions specified/attached with this tender.

All the bidders/tenders should ensure that they are GST compliant and their quoted tax structure/rates are as per GST Law. In case the successful tenderer is not liable to be registered under CGST/IGST/UTGST/SGSTAct, The railway shall deduct the applicable GST from his/their bills underreverse charge mechanism (RCM) and deposit the same to the concerned tax authority.

EMD and SD Condition: As per Clause 3 of Section-I & per Clause 12 of Section-II of NWR SBD appended with this tender.

Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.