DEN/West/SBC sec : Bengaluru - Provision of 06 coach length (140m) Pit facility without catwalk on Road-5 at Mysuru end, including electrical portion (Composite Tender). Maintenance period is 12 months

A1-USSOR - 2022

B1-NBSR Items (Electrical portion)

Item Breakup - A-DSR - 2023

Item Breakup - B-NBSR Items

Providing & fixing precast cement concrete cum solid block Grade C(5) specification confirming to IS2185-2005 in foundation & plinth with 1:6 CM including cost of centering shuttering using contractors men materials tools and plants complete as directed by Eng in charge( Sr.DFM /SBC LETTER No A/SBC/FINANCE/22-23 dtd 30/03/2023)

Providing heavy duty pumping out of water HP Hour from foundation/trenches as directed by Eng in charge LOA no 00841730071191 dt 8/2/23

Providing and laying of sand bags layer by layer Numbers 1000.00 filled with sand in each bag of standard cement bag size with all contractors own bags,sand,labour,T&P,including transportation to the site of work complete as directed by Eng in charge LOA no 00841730071191 dt 8/2/23

providing and removing barricading with the Metre help of portable fencing along the running track where the work is to be done in close vicinity of the trackLOA no 00841730071191 dt 8/2/23

Drilling of holes on the existing RCC wall/slab Each for drainage arrangements as approved by the Eng in charge LOA no 10261470102498 dt 06/05/24-2@46'37@ 2345-56.05=2288.95

Providing lighting arrangements for about 100 Hour meters length for block working during night time involving arranging 2.5 kVA generator, 40 CFL/ tube lights of 40 Watts (approx) each fixed to the bullies at required locations on both sides of track including cost of consumables, such as diesel and engine oil etc. with all contractor's labour, tools, plants, machinery , electric wire, switches and connected materials etc. including shifting of generators after each block, all lead and lift complete and as directed by the Engineer-in-charge.

Manufacturing, supply and fixing of CI bearing Each plate to DRG No. MRC/W/PW/13-93(latest amendments) including transportation, lead, lift, loading and unloading, fuel and consumables etc., complete as directed by the Engineer in charge at site. Total 1279287.10

Item Breakup - A1-USSOR - 2022

TRM Gas cutting of rail of various sections with contractor's tools & plants, as directed by engineer in-charge :

100.00 line for BG track with inserts, elastic rail clips, MS liners and grooved rubber pads below rail to correct spacing, gauge, alignment and level with above fittings & fastenings in position, duly providing full complements of rail fittings. Required nos. of inserts per bearing shall be fixed at the time of concreting bed block over pit wall to correct spacing, centre to centre, alignment & levels as per IR's approved drawing. Anti-corrosive painting of rail outside track on rail bottom, web, foot and fishing plane with two coats of thickness of 100 microns each by bituminous black paint confirms to IS-9862 of reputed make including surface preparation, as a complete job as per procedure prescribed in latest edition of IRPWM.

RM Quick cutting with abrasive rail cutter of all types of rail sections including wear resistant, head hardened rails up to 110 UTS, with contractors tools & plants, equipment, consumable with all lead & lift etc. complete as directed by Engineer in-charge. Abrasive Rail Cutter will be as per RDSO Specification No. TM/SM/1 (Rev. 01 of 2012) with latest status of RDSO; Rail Cutting Wheel Abrasive Disc will be as per RDSO Specification No.TM/SM/2 (Rev. 01 of 2020)

Each Loading, leading and unloading of 52Kg / 60Kg rail up to 13 metre length by Railway's Rail Dolly / Dip Lorry to the nominated location under traffic with line protection in case road carriage is not possible with different lead with a lift up to 5 metre during block period.

MT Total 59747.85

Item Breakup - B1-NBSR Items (Electrical portion)

Cutting of RCC foundation/Tar road ,excavation Metre of cable trench of one feet depth & one feet width a n d refilling trench with excavated soil, ramming, consolidating and bringing the surface to its original level with suitable cement mixer/tar etc as per site condition. BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY

Supply of HDPE pipe of 110mm outer dia PE-80, Metre PN-6 , with proper jointing , bends, clamps etc., as per site condition with all necessary accessories.

Uncoiling, stretching and laying 110mm HDPE pipe in the trench

Uncoiling, stretching and laying of upto 4 core Metre 25-120Sqmm LTUG cable in the trench/duct as per site condition through suitable HDPE pipe with proper terminations and handing over of released Cable/materials if any to concerned power depot incharge with proper account . (LTUG/HTUG cable alone will be supplied by railways to be collected at railway store)

Laying and fixing of one number PVC insulated Metre and PVC sheathed / XLPE power cable of 1.1KV grade of size upto 35 Sqmm to 95Sqmm clamped with MS 25mmx3mm flat clamp on wall surface/steel pole /in the existing cable tra y as required. ( LTUG cable alone will be supplied by Railways to becollected at railway store)

Supply and installation of out door4 way Bus Numbers bar chamber box of 200A capacity for loop in loop out arrangement made out of sheetsteel ,powder coated,16SWG with copper bus bars, proper glands for cable entry including proper foundation with G.I L angle for ground/floor mounting/wallmounting/pole mounting with allnecessary accessories for fixing asper site condition complete

Design, supply, installation and commissioning Numbers of pole mounted type battery charger for conversion of 230V AC /50Hz supply to 110V DC of 30A capacity suitable for lighting loads including all necessary accessories.

Design, supply and provision of63A Industrial Numbers type plug and socket with 100A 4 pole MCCB, 25KA and20A Industrial type plug and socketwith 16A DP MCB, all enclosed inMS sheet enclosure completeincluding all auxilliary accessories &fixing clamps, nuts, bolts etc.

Supply and erection of square tube GI pipe of Numbers length 2 m ,dimensions 75mmx75mm, 5mm thick with proper concrete foundation as per site condition

Supply and installation of IP54 , 6 way SPN DB Numbers suitable for 110V DC application made out of CRCA sheet steel , powder coated with insulated phase bus bar, colour coded interconnecting wire set , locking arrangement complete suitable for provision of DP MCB/isolator/RCCB/RCBO as incomer and SP MCBs as outgoings including all accessories for fixing as per site condition.

Supply and Provision of DP MCB of 32A rating Numbers suitable for 110V DC application with short- circuit breaking capacity of 10KA.

Supply and Provision of SP MCB of 6A-16A Numbers rating suitable for 110V DC application with short-circuit breaking capacity of 10KA.

Supply and laying of PVC insulated 3 core Metre 4sqmm circular sheathed cable with flexible copper conductor confirming to IS 694 as per specification BANGALORE DIVISION-ENGG/SOUTH WESTERN RLY

Supply and laying of industrial CPVC conduit of Metre 1 inch dia in the recess or on the wall with saddles with all necessary accessories as per site condition.

Supply and Wiring for circuit/ sub main wiring Running alongwith earth wire with 2x1.5Sq.mm+ Metre 1x1.5Sq.mm earth wire of FRLS PVC insulated copper conductor , single core cable in surface/recessed medium class PVC conduit/casing and capping including supply and laying of PVC conduit/casing and capping with all accessories like round block, ceiling rose, flexible wire for connecting lights,fan fittings etc as per specification. ( PVC conduit/casing and capping to be used as per site condition.)

Supply of IP66 cable junction box suitable for Numbers 4Sqmm wiring with integrated membranes/metric knockouts , grommets for cable entry with all necessary accessories.

Fixing of cable junction box with necessary Numbers screws, nut, washers etc required as per site condition.

Supply and fixing of 10W LED bulk head fitting Numbers IP66, IK07 with drivers for 110V DC operation, suitable for wet locations including all accessories as per specification.

Design, and supply of Enclosure with Numbers transparent lid suitable for light fixture housing with Dimensions W 217* H 253* D 115 MM, IP 66 rated, Polystyrene Material, rated insulation voltage 1000V AC/DC, Impact Strength IK 08 , Fire protection - flame-retardant, self- extinguishing, Weatherproof, Corrosion free, Insulated and Shock proof, with necessary synthetic cable glands,nut bolts,reduction fittings, locking arrangement as per site condition.

Fixing of light fixture enclosure with necessary Numbers screws, nut, washers etc required as per site condition.

Supply and fixing of 250W , 230 Volt AC Numbers supply,50 Hz IP 66 die-cast alluminium LED Flood light fittings with suitable drivers and all connected materials conforming to specificationNo.SWR /LED LIGHT FITTING(Indoor/Outdoor)/011-2016 dt 18.04.16

Design,supply arrangement material with 50mm dia, class C, GI pipe including all auxilliary accessories as per drawing and specification.

Supply and extension of earth continuity from Metre earth pit to metering bunk by 8 SWG GI wire including all auxilliary accessories. Total 1732429.00