REPAIR / MAINT FLOOR, JOINERY, SUNKEN FLOOR, ROOF TREATMENT, FLOOR TILE, ROOF TREATMENT AND CONNETED B/R ITEM OF JNE AND ADJOINING AREA UNDER AGE BR-II OF GE (NORTH) UDHAMPUR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish off the premises out side MD land, complete all as specified and directed.

M&L for 7-8mm thick non skid ceramic coloured tiles (square / rectangular), area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm as in floors, skirtings, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid/ fixed over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for 10mm thick vitrified coloured ceramic tiles of any colour (square or rectangular) polished, area of each tile not exc exceeding 0.36 Sqm as in floor and skirtings etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid/ fixed over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

S&F glazed ceramic coloured tiles of size 450mm x 350mm x7mm thick or 350mm x 250mm x 7mm thick as on verticle surfaces, set and jointed in neat cement slurry, fixed over and including 10mm thick rendering in CM 1:4 and pointed in coloured cement to match the shade of tiles, complete all as specified and diredted.

M&L for rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, conforming to Fe-410-W (Gde-E- 250) Quality 'A', complete all as specified and diredted.

Dismantling wrought iron or mild steel work of any description, not otherwise provided for, complete all as specified and directed.

M&L for rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc. complete, drilled for fixing of steel sheeting or other covering. Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging and also fastening and fixing, confirming to Fe-410-W (Gde-E- 250) Quality 'A', complete all as specified and directed.

M&L for 18-20mm thick machine cut kota stone slab flooring, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete and rounding of edges, laid over and including 20mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for 18-20mm thick machine cut kota stone slab as in skirtings, dados, walls, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, fixed over and including 10mm thick plaster in CM 1:4, complete all as specified and directed.

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including grinding and polishing with rounding to edges of stone slabs one edge complete, laid/ fixed over and including 20mm thick screed be/ plaster CM 1:4, complete all as specified and directed.

Rounding / moulding to edge (half round) of stone of any description including rubbing and polishing, complete all as specified and directed.

Taking down cement plaster of any description on brick work or stone masonry or cement concrete walls including raking out joints, hacking for key, scrubbing down with water including remaval of derbis, complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 with using water proofing compound, finished the surface even and smooth without using extra cement, complete all as specified and directed. Note :- WPC shall be deemed to include in the quoted rates.

M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 5mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:3, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 50mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregates) as in plinth protection, laid in alternate ways (not exc 2.0 Sqm each) and finished the surface even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and directed.

Taking down chowkats or frames (without taking off shutters from frame), area not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed.

Taking down chowkats or frames (without taking off shutters from frame), area exc 1.50 Sqm but not exc 4.00 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fasts shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed.

Taking down shutters of any description, area exc 1.0 Sqm but not exc 2.0 Sqm each, complete all as specified and directed.

M&L for pressed steel frames of size 125x60mm for doors with one or more rebates including necessary lugs, hinges, lock strike plate etc. complete and including one shop coat of red oxide zinc chrome primer, complete all as specified and directed.

M&L for pressed steel frames of size 105x60mm for doors with one or more rebates including necessary lugs, hinges, lock strike plate etc. complete and including one shop coat of red oxide zinc chrome primer, complete all as specified and directed.

S&F factory made 2nd class hard wood rail and style 35mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

All as per serial item No. 22.00 here-in-above but glazed and skeleton shutter with sash bar for glass / wire gauge.

M&L for plain cement concrete 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregates) as filling in back of pressed steel door frame / hold fasts, complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm, made out of 5mm thick plain colour PVC sheet reinforced with MS. Square tube, in opening as per specification and drawings, complete all as specified and directed.

S&F factory made 30mm thick PVC door shutter, consisting of panel of Hollow PVC Profile of 24mm thickness, consisting of frame made out of M.S tubes of 19 gauge thickness and size of 19mm x 19mm inserted inside the hollow section of stiles, top and bottom rails and two 19mm x 19mm MS tubes inserted horizontally inside the hollow profile section at an equal distance from top and bottom of door and fixed with hollow profile section using 3mm thick Prelam PVC sheet using screws. Hollow PVC profile shall be lipped with 10mm (5mm x 2) thick x 24mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant Prelam PVC sheet using solvent cement on both the sides of the panel etc complete as per direction of Engineer-in-Charge.

Dismantling of steel windows of any description and fixed in any position including grill etc, complete all as specified and directed.

S&F factory made steel window (box type) with glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc. including one shop coat of red oxide zinc chrome primer, complete all as specified & shown in drawings.

S&F factory made steel window (box type) without glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc. including one shop coat of red oxide zinc chrome primer, complete all as specified & shown in drawings.

S&F steel ventilator (box type) with top hung shutter including hinges, complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolts with bright finish, complete all as specified and directed.

S&F 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy, complete all as specified and directed.

S&F 150mm long alunminium handle, cast type, oval shape, complete all as specified and directed.

M&L for preparation of new wooden surfaces, exceeding 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

M&L for preparation of new steel and iron surfaces, exceeding 10cm width or girth and applying two coats of synthetic enamel paint over preprimered surface, complete all as specified and directed.

S&F in replacement vitreous china wash down water closet pan `P` or `S` trap (pedestal pattern) white including fixing bolts, connection 'P' trap etc. to drain pipe (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc, complete all as specified and directed.

S&F in replacement vitreous china squatting pan ‘Orissa’ pattern of size 580x440mm, white with integral foot rest (excluding flushing system and flush pipe) with ‘P’ or ‘S’ trap, complete all as specified and directed.

S&F in replacement 10 Ltr capacity PVC valveless syphonic action type flushing cistern, low level, white with inlet including bracket and 32mm flush pipe of polythylene ball valve, float and handle of low or high density and including 15mm dia PVC connection pipe of 450mm long, complete all as specified and directed.

Demolition of brick work or stone boulder masonry, built in cement mortor including all quoins, arches, pillars etc, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6 mtr mean radius, built in CM 1.6, complete all as specified and directed.

M&L for half thick brick work with sub class 'B' brick, old size, built in CM 1:4, complete all as specified and directed.

S&F in replacement viterous china wash basin, pedestral type, white flat back of size 550mm x 400mm including 32mm dia waste couping of CP, chain and plug and porcelan stopper and CI brackets of angle iron of size 65x65x6mm, embedded in PCC block in CC 1:2:4 type B-1 and including 450mm long PVC waste pipe, complete all as specified and directed.

S&F in replacement pillar tap, cast copper alloy, fancy type with capstan head, chromium plated, screwed down, high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed of 15mm bore iron pipe, complete all as specified and directed.

S&F in replacement PVC connection of 15mm dia with PTMT nuts of length 450mm, complete all as specified and directed.

S&F in replacement chromium plated tubular towel rail, 'D' type, 600mm long between flanges, complete all as specified and directed.

M&L for preparation of old decorated surfaces and applying two coats of distemper oil emulsion on walls over a coat of 1mm wall care putty including complete removal of existimg treatment, complete all as specified and directed.

M&L for preparation of new decorated surfaces and applying two coats of distemper oil emulsion on walls over a coat of 1mm wall care putty, complete all as specified and directed.

M&L for three coats of white wash on new surface of ceiling, complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of chalk whitening primer, complete all as specified and directed.

M&L for preparation and brooming down of old decorated plastered or unplastered surfaces of walls including cornice etc. and applying one coat of white wash, complete all as specified and directed.

M&L for preparation and brooming down of old decorated plastered or unplastered surfaces of ceiling including cornice etc. and applying one coat of white wash, complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.

S&F 15mm bore steel water tubing, medium grade, galvanised with all fittings and fixtures, fixed to wall or ceiling or laid in floors, complete all as specified and directed.

Re-fixing of 15mm bore steel water tubing, medium grade and including all necessary fitting and fixtues, fixed to wall or ceiling or laid in floors, complete all as specified and directed.

S&F 20mm bore steel water tubing, medium grade, galvanised with all fittings and fixtures, fixed to wall or ceiling or laid in floors, complete all as specified and directed.

S&F 25mm bore steel water tubing, medium grade, galvanised with all fittings and fixtures, fixed to wall or ceiling or laid in floors, complete all as specified and directed.

S&F in replacement of stop valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe, complete all as specified and directed.

S&F in replacement of 15mm dia bib tap, cast copper alloy, fancy type, chromium plated with crtuch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, complete all as specified and directed.

S&F in replacement of bib tap of standard of PTMT (Minimum weight 15mm-90gms / 20mm-125gms) of any colour, high pressure, screwed for 15/20mm bore iron pipe, complete all as specified and directed.

S&F in replacement of 32/40mm dia waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms / 40mm-60 gms), complete all as specified and directed.

S&F in replacement of waste pipe of PTMT of 32/40mm dia, complete all as specified and directed.

S&F in replacement PVC connection 15mm dia with PTMT nuts of length 600mm, complete all as specified and directed.

S&F 500 ltrs capacity rotational moulded polyethlene water storage tank (cylindrical vertical with closed top), hoisted and fixed in position and including dismantling and removing old tank from site, complete all as specified and directed.

S&F 1000 ltrs capacity rotational moulded polyethlene water storage tank (cylindrical vertical with closed top), hoisted and fixed in position and including dismantling and removing old tank from site, complete all as specified and directed.

S&F in replacement ball brass valve, high pressure with polyethene float & fly-nut complete, screwed for 15mm bore iron pipe or brass ferrule, complete all as specified and directed.

S&F in replacement ball brass valve, high pressure with polyethene float & fly-nut complete, screwed for 20mm bore iron pipe or brass ferrule, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position, not otherwise specifically provided for, complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in floors, complete all as specified and directed.

M&L for 40mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in floors including staircase steps, finished the surface even and smooth using extra cement, complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregates) as in floor / stair case / leveling course / base of tiles, stones slabs, complete all as specified and directed.

M&L for machine pressed rubber moulded, manufactured / compacted by vibrating table method precast concrete interlocking paver block of any shape and size, confirming to IS:15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment and joints filled with sand, complete all as specified and directed.

M&L for 25mm thick sand filling under floors or in foundations including watering, ramming and consolidation, complete all as specified and directed.

M&L for factory made, glossy finished, coloured chequred cement concrete tiles, size of each tile 30cm x 30cm x 25mm thick, machine pressed, set and jointed in neat cement slurry and jointing with white/ grey cement & pigments to match with tiles, laid/ fixed over and including 15mm thick screed bed in CM 1:4 as in floors, complete all as specified and directed.

S&F aluminium extruded section hydraulically door closer, regulated designation No.1, universal type, suitable for door shutter upto 700mm in width and of weight not more than 35 Kg, complete all as specified and directed.

S&F in replacement wash basin, vitreous china, flat back of size 580mm x 450mm (excluding CP pillar tap) including 32mm dia waste coupling of PTMT, 15mm dia 450mm long PVC connection pipe, 32mm dia PVC waste pipe and angle brackets of size 30x30x3mm thick 450mm long, complete all as specified and directed.

S&F in replacement chromium plated towel ring (minimum weight 90 Gram), fixed with brass screws and wooden/plastic cleats, complete all as specified and directed.

S&F in replacement vitreous china bowl urinal, flat back size of 465mm x 355mm x 265mm, white (miniumum) with grating & union for discharge pipe (excluding flushing cistern) and including waste fitting, complete all as specified and directed.

Demolition of cement concrete reinforced of any description and in any position, not otherwise specifically provided for, complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in beams, cantilevers, bressummers, lintels over 1.5 mtr span, complete all as specified and directed.

M&L for RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like and including 15mm thick plastering in CM 1:4 with using water proofing compound, laid/made to slope as in RCC roof surfaces, complete all as specified and directed.

Use and waste of formwork to rough finished concrete soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.

Use and waste of formwork to edges of concrete (rough finished surfaces) flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work, exc 10cm but not exc 20cm wide, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed.

M&L for mild steel TMT bars, 6-8mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm, fixed with tinned tacks or galvanised with wire staples, complete all as specified and directed.

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed.

S&F powder coated (of approved colour) aluminium (minimum thickness of powder coating 50 micron) as in sliding shutter of windows, ventilators openable / louvers, fixed or sliding type without sash bars, aluminium section not less than 0.55 Kg/m including nessery jointing, cleats, glazing clips, rubber, neoprene packing, aluminium snap beding, screws, rolling for smooth moving and locking arrangement etc, fixed to wall including making good to disturbed portion both side (internal & external surfaces of wall) to match with existing surfaces and all sides of aluminium frame shall be sealed with silicon sealent (inner/outer face), complete all as specified directed.

S&F aluminium deco grill of 5 to 6mm dia, size of mesh not exe 7.5cm in either direction including anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/ pattern with approved standard section and fixed to the existing window frame with CP brass / stainless steel screws @ 200mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed.

M&L for powder coated anodised aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc, complete all as specified and directed.

S&F double action floor spring, hydraulically regulated, made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.

Dismantling wall and ceiling boards, (fibre, pulp, insulation etc) or insulation boards / slabs / blankets, any thickness including cover fillets, complete all as specified and directed.

S&F 4mm thick non asbestos fibre cement board ceiling, panel size of 605x605mm each, designed ceiling conforming to IS-14862 type 'B' category three including snapgrid frame work, hold fasts, suspenders, complete all as specified and directed.

S&F 4mm thick non AC board, fixed or laid / inserted to timber/ aluminium frame work with screws, complete all as specified and directed.

Hacking out old broken glass of any thickness, size quality from wooden frame or steel frame, glazed with putty or fixed with beads, complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed.

S&F 4mm thick figured glass, pin head type and glazing with oil putty in squares in not exceeding 0.50 Sqm in each pane, complete all as specified and directed.

Dismantling of CGI / PGI / AC or any others sheet of any description including ridges, complete all as specified and directed.

S&F 0.50mm thick prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F 0.50mm thick prepainted galvalume aluminium zinc coating GI based plain steel sheet of any colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipes in any length with rubber ring joints, fixed to walls any height with suitable size MS clamps including taking down existing old pipe, complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes in any length with rubber ring joints, fixed to walls any height with suitable size MS clamps including taking down existing old pipe, complete all as specified and directed.

Dismantling of boarding of any description, fixed in any position with nails, complete all as specified and directed.

S&F solid PVC Wall Lining (Wall Panelling) consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) as in sunken portion of WC, removing all loose particale alogwith exiting water proofing treatment, cleaning by wire mess/ brushes to removing all dirt and cleaning the surface with water etc, complete all as specified and directed.

Providing and laying water proofing treatment to sunken portion of WCs, bathrooms etc by applying first layer of slurry of cement @ 0.488 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.253 Kg/Sqm, this layer allowed to air cure for 4 hours then applying slurry of cement @ 0.242 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.126 Kg/Sqm and allowed to aircure for 4 hrs and joints seal with sealing compound as approved by GE, complete all as specified and directed. Note :- Before laying of cement concrete, joints of trap/ WC/ soil pipes shall be properly sealed with sealing compound of Roofex/ Forre/ FOSROC and provn of 'P' or 'S' trap & Nahani / floor traps with long arm.

M&L for 15mm thick rendering in CM 1:3 in sunken portion WCs / bathrooms or on roofs surfaces of any type, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for plain cement concrete 1:5:10 type E-2 (using 40mm graded crushed stone aggregate) as in sunken portion treatment, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) as in roofs of existing water proofing treatment of any type and any thickness, complete all as specified and directed.

M&L for roughing surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc. for local depressions RCC surface and brushing neat cement slurry with 3.0 Kg of cement per Sqm, complete all as specified and directed.

M&L for applying bituminous primer confiriming to IS-3384 @ 0.40 Kg/Sqm on prepared surface on sunny day. After the primed surface has dried and apply a coat of hot blown 85/25 penetration grade blown bitumen, confirming to IS-702@ 1.20 Kg/Sqm on the surfaces. Provide APP (Atactiic Polypropylene) modified polymeric five layered membrane with central core of 100 micron high molecular high density firm. Minimum weight of membrance will be 3 Kg/Sqm. APP membrance will be laid across the slope from lowest line sloping roof towards ridge with minimum end lap of 150mm & side lap of 75mm bonded with hot blown bitumen. Over the APP membrance apply semi hot blown 85/25 penetration grade bitumen @ 1.20 Kg/Sqm and blinded with fine sand in dry condition @ 0.50 Kg/Sqm dusted over the bitumen coat and applying aluminium paint, complete all as specified and directed. Note :- The laying of the membrane shall be got done by authorized applicator of the membrane manufacturer.

S&F in replacement health faucet, brass, chromium plated with 1000mm long 8mm dia chrome finish flexible pipe with wall hook, complete all as specified and directed.

S&F in replacement jet spray, brass, chromium plated, heavy duty, including flexible pipe suitable for 15mm bore water connection for EWC, complete all as specified and directed.

S&F in replacement soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs and brass chromium plated screws, complete all as specified and directed.

S&F in replacement shower rose, brass, chromium plated, 125mm dia with or without swivel joint, with and including CP brass arm and wall flange, fixing to steel pipe or union, complete all as specified and directed.

S&F in replacement glass shelf assembly, consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60cm long, complete all as specified and directed.

S&F in replacement centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy, with dual capstan heads, chromium plated, screwed down high pressure, with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore iron pipe, complete all as specified and directed.

S&F in replacement sink wall mixer, brass, chromium plated, fancy type with capstan head handles, screwed down high pressure with lettered 'hot' and 'cold' including CP brass wall flanges and necessary extension nipples, screwed for 15mm bore pipe connection, complete all as specified and directed.

S&F in replacement sinks with drainage board, made of stainless steel 1mm thick, kitchen or laboratory with plugs, washers and wastes including CP waste coupling and waste pipe & bedding in CM to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

M&L for 18/19mm thick prelaminated particle board, medium density, flat pressed single layer type or three layer type with BWR type adhesive, complete all as specified and directed.

S&F continuous (Piano) hinges, mild steel, bright finish or electrogalvanised width of flap 30mm, complete all as specified and directed.

S&F hasp and staple, 100mm size, mild steel, safety type, stove enalmelled black including bolt to hinge plate and fixed with screws, complete all as specified and directed.

S&F 100mm long mild steel butt hinges, medium weight, cold rolled, complete all as specified and directed.

S&F in replacement of stainless steel tubular curtain rod of 28mm dia (As per sample kept in GE's Office), complete as specified and directed.

S&F in replacement of stainless steel brackets / wall blackets, suitable for curtain rod of 28mm dia (As per sample kept in GE's Office), complete as specified and directed.

S&F stainless steel knobs, suitable for curtain rod of 28mm dia (As per sample kept in GE's Office), complete as specified and directed.

M&L for cleaning of water tank of any capacity and any description including scraping, scrubbing (without damaging tank surface), deposits / scales, algae formations, silt / sticky matters adhering tank surface and washing inner tank surface with approved grade of chemicals, complete all as specified and directed.

SINGH CONST CO (BID ID -3409739)

S K BROTHERS (BID ID -3416715)

M/S JANDIAL ENTERPRISES (BID ID -3417103)

KUMAR CONSTRUCTION CO (BID ID -3417248)

HANS RAJ SHARMA (BID ID -3410330)

paras ram pachiala (BID ID -3409902)

TULSI RAINA AND SONS (BID ID -3409900)

sohtra and co (BID ID -3412900)