TMD/MIN/ELECT-75

4C x 16 Sqmm

3.5CX35 Sqmm.

3.5CX70 Sqmm.

Upto 35 sq. mm

Above 35 sq. mm and upto 95 sqmm.

Upto 35 sq. mm (clamped with 1mm thick saddle)

Above 35 sq. mm and upto 95 sqmm.(clamped with 25x3 mm MS clamp)

Excavation of the cable trenches in hard rock/PCC/RCC not exceeding 1.5 metres in width,and lift upto 1.5 metres including getting out the excavated soil.

1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm)

50 mm dia

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.

4 X 16 sq. mm (28mm)

3.5CX35 Sqmm.

3.5CX70 Sqmm.

Supply,testing and fixing of LED type tube light fitting,Mas LED Tube 30/40 w,4000/6000 lumen,865 TB /EQUIVALENT WITH BATTEN.Make - Philips.

Supply, installtion testing and commissioning of Garden Light PHILIPS SLIDE PEDESTAL GREY-B22 - Outdoor Garden Post Light with LED bulb,20 watt with all electrical accessories, civil items includingelectrical connection &Civil masonary work of base foundation etc as per direction of Engineer incharge.

Supply fixing testing and commissioning of Philips Saturn LED ceiling light(Sleek Elegant Ceiling Light),18 Watt,Body Colour-Gold Dimentions 250mmx65mmx250mm(LXBXH) recess mounted with complete fixing of Existing false celing metalic frame etc as per direction of engineer incharge.

Supply and installation of Area Lighting LED Fitting System Wattage: 35 W, IP Rating: IP66, Lumen Output: 3500 Lm, System Efficacy: 100 Lm/W, Color Temperature: 5700 k, CRI: 70, Housing- LM6 High Pressure Die Cast Aluminium, Cover Glass, Mounting: Wall/ Bracket, THD: < 10%, PF: >.95, Voltage: 140-270 V AC 50 Hz,Type-BVP120LED70CWFGS1PSUGR,Make-Philips.Supply and installation of all fixing materials are in the scope of contractor.

12 way (4 + 36), Double door

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts,63 A/100A, residual current circuit breaker (RCCB),having a sensitivity current 100 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, four pole,100 A, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Double pole

Triple pole

Triple pole and neutral

Supplying and fixing of following ways horizontal three pole and neutral sheet steel ,MCB distribution board ,415 V surface/ recess , dust protected, duly powder painted,complete with tinned copper bus bar, neutral bus bar, earth bar, din bar interconnections,including earthing etc. (but without MCBs and incomer ) as required .a). 4 Way (4+12),double door

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Group C

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.(All supply items are also in the scope of contractor.)

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 X 10 sq. mm +2 X 6 sq. mm earth wire

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A "C" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

Supply,installation,testing and commissioning of 1200mm sweep,BEE 5 Star rated,ceiling fan with brushless direct current (BLDC) Motor,class of insulation:-B,03 nos. blades,30 cm long down rod,02 nos. canopies,shackle kit,safety rope,copper winding,power factor not less than 0.9,service value(CM/M/W) minimum 6.00,air delivery minimum 210 cum/min,350 rpm(tolerance as per IS:373-2019),thd less than 10%, remote unit for speed control and all remaining accessories including safety pin,nut bolts,washers,temperature rise = 75 deg C (max.),insulation resistance more than 02 mega ohm,suitable for 230V,50 Hz,single phase A.C. Supply,earthing etc. complete as required.

Supply and installation of heavy duty exaust fans,450 mm sweep,single phase,(230+/- 10%)volt complete with loubers.This also includes all masonary work and supply of all fixing materials for fan and loubers.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc.complete as required.

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

Supply and installation of FEEDER PILLAR BOX having 250 Amp MCCB as incomer with ELR protection and multifunction meter(ammeter,voltmeter &energy meter) and 100 Amp MCCB as outgoings-05 Nos. Automatic Light Controller-01 No. There should be terminals for incoming and outgoing connections

Supply, Testing and Commissioning of split A.C. energy saver, 1.5 ton A.C with stabilizer 220 V,50 Hz. Make-LG/VOLTAS.