CIVIL SOR - CHANDIGARH RO

SITE CLEARANCE — Surface dressing of the ground including removing small plants, bushes ,vegetation (dia less than 4") and making surface levelled and disposal of rubbish outside HPCL's premises to an unobjectionable place, as directed by the Engineer in Charge. 2 EXCAVATION IN EARTH UPTO 31103- Cubic Meters 205 995432 Yes 1.5 M Excavation for foundation upto required depth below existing ground level up to 1.5m in any tyoe odf soil except hard rock. Rate to include dressing the sides and bottom, bailing out of water if encountered, shoring, strutting, backfilling after the construction of foundation, trenches/plinth beam etccompacting by the side of the foundation and disposal of surplus excavated earth within/outside HPCL's premises to an unobjectionable place, as directed by the Engineer in Charge including spreading, watering and compaction, complete. The measurement of the excavation would be based on actual depth of excavation with applicable rate for different depths. 3 EXCAVATION - 1.5 TO 3 M 31103- Cubic Meters 273 995433 Yes Excavation for foundation upto required depth below ground level in any type of soil except hard rock . Rate to include dressing the sides and bottom, bailing out of water if encountered, shoring, strutting, backfilling after the construction of foundation, foundation, trenches/plinth beam etc compacting by the side of the foundation and disposal of surplus excavated earth within/outside HPCL's premises to an unobjectionable place, as directed by the Engineer in Charge including spreading, watering and compaction, complete . The measurement of the excavation would be based on actual depth of excavation with applicable rate for different depths.EXCAVATION IN EARTH UPTO 3 M 4 EXCAVATION - 3 TO 4.5 31103- Cubic Meters 697 995433 Yes Excavation for foundation upto required depth below ground level in any type of soil except hard rock . Rate to include dressing the sides and bottom, bailing out of water if encountered, shoring, strutting, backfilling after the construction of foundation, compacting by the side of the foundation and disposal of surplus excavated earth within/outside HPCL's premises to an unobjectionable place, as directed by the Engineer in Charge including spreading, watering and compaction, complete . The measurement of the excavation would be based on actual depth of excavation with applicable rate for different depths. EXCAVATION IN EARTH BETWEEN 3 TO 4.5 5 EXCAVATION- HARD ROCK 31103- Cubic Meters 592 995433 Yes UPTO1.5M Excavation for foundation upto required depth below existing ground level up to 1.5 m. depth in concrete road by chiselling / pneumatic drilling . Rate to include dressing the sides and bottom, bailing out of water if encountered, shoring, strutting, backfilling after the job to restore the original state of the ground and disposal of surplus excavated earth within/outside HPCL's premises to an unobjectionable place, as directed by the Engineer in Charge including curing, watering and compaction and complete . The measurement of the excavation would be based on actual depth of excavation. 6 -EXCAVA-HARDROCK 1.5 3.0 31103- Cubic Meters 787 995433 Yes MTS Excavation for foundation upto required in hard rock and excavation shall be done by chiselling / pneumatic drilling or Blasting. Rate to include dressing the sides and bottom, bailing out of water if encountered, shoring, strutting, backfilling after the construction of foundation, trenches/plinth beam etc compacting by the side of the foundation and disposal of surplus excavated earth within/outside HPCL's premises to an unobjectionable place, as directed by the Engineer in Charge including spreading, watering and compaction, complete . The measurement of the excavation would be based on actual depth of excavation with applicable rate for different depths. EXCAVATION IN HARD ROCK 1.5 mts- 3.0 mts 7 -EXCAVA-HARD ROCK 3.0 4.5 31103- Cubic Meters 2013 995433 Yes MTS Excavation for foundation upto required in hard rock and excavation shall be done by chiselling / pneumatic drilling or Blasting. Rate to include dressing the sides and bottom, bailing out of water if encountered, shoring, strutting, backfilling after the construction of foundation, compacting by the side of the foundation and disposal of surplus excavated earth within/outside HPCL's premises to an unobjectionable place, as directed by the Engineer in Charge including spreading, watering and compaction, complete . The measurement of the excavation would be based on actual depth of excavation with applicable rate for different depths. EXCAVATION IN HARD ROCK BETWEEN 3 TO 4.5 8 SAND FILLING - LAYERS 31103- Cubic Meters 1289 995432 Yes 150MM Supply and filling with clean silver / river sand of approved quality in layers of 150 mm each including spreading, compacting by hand ramming and watering etc, all complete as per direction of Engg.-In-Charge. Measurement basis compacted thickness only. 9 CRUSHEDSTONESAND 31103- Cubic Meters 1521 995432 Yes FILLING-150MM Supply and filling with Crush Sand as per IS 21116-1980-2 & IS 486:2000 & IS 383.1970 The particle shape is semi rounded or cubical & not flakey or elongated. Dust percentage is strictly controlled 10 - 15% with fineness modulus 2.6 to 3. Supply and filling with Stone Crushed sand of approved quality in layers of 150 mm each including spreading, compacting by hand ramming and watering etc, all complete as per direction of Engg.-In-Charge. compacted thickness only. 10 MURRUM FILLING - LAYERS 31103- Cubic Meters 824 995432 Yes 150MM Supplying and filling good quality murum in layers of 150 mm thick including watering and compacting till maximum compaction is achieved as directed by Engineer In Charge.Compacted volume shall be considered for payment. 11 EARTH FILLING 31103- Cubic Meters 451 995432 Yes Supplying and filling imported earth of approved quality in layers not exceeding compacted thickness of 200mm incl. Watering ,ramming, compacting, and if required, rolling and re-rolling with power roller , mechanical compactors of 80KN- 100 KN capacity to achieve maximum compaction, all complete as per direction of Engg.-In- Charge. The earth should be free from weeds, grass and other objectionable debris. Black Cotton soil shouldn't be used. Measurement basis compacted thickness only. Rate shall include conducting compaction test as per tech spec. 12 PCC 1:4:8 31103- Cubic Meters 4639 995454 Yes Providing and laying PCC 1:4:8 using 40 mm and down size graded stone aggregates including machine mixing, providing formwork if required, placing, compacting by hand ramming , curing etc complete. 13 PCC 1:3:6 31103- Cubic Meters 5216 995454 Yes Providing and laying PCC 1:3:6 using 20 mm and down size graded stone aggregates including machine mixing, providing formwork if required, placing, compacting by hand ramming, curing etc complete. 14 PCC 1:2:4. 31103- Cubic Meters 5831 995454 Yes Providing and laying PCC 1:2:4 using 20 mm and down size graded stone aggregates including machine mixing, providing formwork if required, placing, compacting by hand ramming, mechanical vibrators, curing etc complete. 15 PCC 1:2:4 FOR DPC 31103- Square Meters 365 995453 Yes Providing and laying 50 mm thick DPC in 1:2:4 mix with 6 to 12 mm size aggregate and water proofing compound of approved make as per manufacturer specification. 16 PCC 1:2:4 FOR COPING 31103- Cubic Meters 6091 995454 Yes Providing and laying 60 mm average thickness coping in CC 1:2:4 mix using 6 to 12 mm stone aggregate with 40 mm projection on either side of wall with drip mould. Rate to include 20 mm thick plaster in cm 1:4 for fixing of glass pieces including mixing, providing necessary shuttering, compaction and curing. Thickness of coping at the ends shall be 40 mm and 80 mm at centre . 17 RCC1:1.5:3-FOOTING/PILE CAP 31103- Cubic Meters 7478 995454 Yes Providing , mixing and placing REINFORCEMENT CEMENT CONCRET 1:2:4 mix using 20 mm and down size graded crushed aggregate including providing and fixing necessary plywood /steel shuttering , scaffolding, bracing, machine mixing, compacting by vibrators, curing, hacking the surface to receive plaster etc. complete. Rate shall be exclusive of the cost of steel reinforcement, which will be paid under a separate item. Concrete conforming to relevant specifications of IS 456 - Latest Edn. 18 RCC 1:1.5:3 -COLUMNS / 31103- Cubic Meters 8317 995454 Yes BEAMS Providing , mixing and placing REINFORCEMENT CEMENT CONCRET 1:1.5:3 mix using 20 mm and down size graded crushed aggregate including providing and fixing necessary plywood /steel shuttering , scaffolding, bracing, machine mixing, compacting by vibrators, curing, hacking the surface to receive plaster etc. complete. Rate shall be exclusive of the cost of steel reinforcement, which will be paid under a separate item. Concrete conforming to relevant specifications of IS 456 - Latest Edn. RCC 1:1.5:3 FOR COLUMNS / BEAMS/SIDE OF ETP TANK 19 RCC1: 1.5:3ROOF 31103- Cubic Meters 8637 995454 Yes SLAB/CHAJJA Providing , mixing and placing REINFORCEMENT CEMENT CONCRET 1:1.5:3 mix using 20 mm and down size graded crushed aggregate including providing and fixing necessary plywood /steel shuttering , scaffolding, bracing, machine mixing, compacting by vibrators, curing, hacking the surface to receive plaster etc. complete. Rate shall be exclusive of the cost of steel reinforcement, which will be paid under a separate item. Concrete conforming to relevant specifications of IS 456 - Latest Edn. - FOR ROOF SLAB & CHAJJA 20 RCC 1:1.5:3 FOR CULVERT 31103- Cubic Meters 7604 995454 Yes SLAB Providing , mixing and placing REINFORCEMENT CEMENT CONCRET 1:1.5:3 mix using 20 mm and down size graded crushed aggregate including providing and fixing necessary plywood /steel shuttering , scaffolding, bracing, machine mixing, compacting by vibrators, curing, hacking the surface to receive plaster etc. complete. Rate shall be exclusive of the cost of steel reinforcement, which will be paid under a separate item. Concrete conforming to relevant specifications of IS 456 - Latest Edn. RCC 1:1.5:3 FOR CULVERT SLAB 21 -RCC 1:1.5:3 BOTTOMRAFT 31103- Cubic Meters 7420 995454 Yes TANK Providing , mixing and placing REINFORCEMENT CEMENT CONCRET 1:1.5:3 mix using 20 mm and down size graded crushed aggregate including providing and fixing necessary plywood /steel shuttering , scaffolding, bracing, machine mixing, compacting by vibrators, curing, hacking the surface to receive plaster etc. complete. Rate shall be exclusive of the cost of steel reinforcement, which will be paid under a separate item. Concrete conforming to relevant specifications of IS 456 - Latest Edn. RCC 1:1.5:3 FOR BOTTOM RAFT OF UG TANK 22 RCC 1:1.5:3-TOP SLAB TANK 31103- Cubic Meters 7487 995454 Yes Providing , mixing and placing REINFORCEMENT CEMENT CONCRET 1:1.5:3 mix using 20 mm and down size graded crushed aggregate including providing and fixing necessary plywood /steel shuttering , scaffolding, bracing, machine mixing, compacting by vibrators, curing, hacking the surface to receive plaster etc. complete. Rate shall be exclusive of the cost of steel reinforcement, which will be paid under a separate item. Concrete conforming to relevant specifications of IS 456 - Latest Edn. RCC 1:1.5:3 FOR TOP SLAB OF UG TANK 23 READY MIX CONCRETE(RMC 31103- Cubic Meters 8822 995454 Yes M- 30) Providing and laying in position specified grade (Ready Mix Concrete) controlled concrete as per approved mix design for sub-structure (i.e. upto ground level icluding pavement ) and shapes using graded metal with size 20 mm and 12.5 mm. including placing, vibrating, compacting, curing etc. complete as per provisions of the relevant IS codes Rate shall be exclusive of the cost of steel reinforcement, which will be paid under a separate item READY MIX CONCRETE (M-30) FOR FOOTNG / COLUMNS / BEAMS / ROOF SLAB as per IS-4926 24 READY MIX CONCRETE(RMC 31103- Cubic Meters 8088 995454 Yes M- 25) Providing and laying in position specified grade (Ready Mix Concrete) controlled concrete as per approved mix design for sub-structure (i.e. upto ground level icluding pavement ) and shapes using graded metal with size 20 mm and 12.5 mm. including placing, vibrating, compacting, curing etc. complete as per provisions of the relevant IS codes Rate shall be exclusive of the cost of steel reinforcement, which will be paid under a separate item READY MIX CONCRETE (M-25) FOR :RCC D/way/ Culvert slab/Tank bottom raft/tank top slab as per IS-4926 25 RMC M-150 SUPERSTRUCTOR 31103- Cubic Meters 7157 995454 Yes 300MM RMC M-150 SUPERSTRUCTOR ABOVE 3M HTU. Under Reamed PILES 300MM DIA. Providing RCC 1:1.5:3 for under reamed piles up to required depth with double bulbs as per IS 2911 etc. All complete. Reinforcement steel shall be paid separately. Pile cap shall be paid separately.- size 300 mm diameter 26 BORED CAST IN SITU- 350 MM 31103- Meters 1829.9 995454 Yes DIA Boring, Providing and installing Bored cast-in-situ R.C.C. pile of 350 mm diameter & length below the pile cap M25 in Cement Concrete, to carry a safe working load not less than specified, including Chiseling in Hard Rock upto 4D, excluding the cost of steel reinforcement but including the cost of boring with, bentonite solution & temporary casing of appropriate length for setting out & removal of same and the length of the pile to be embedded in the pile cap e.t.c. all complete, including removal of excavated earth from HPCL compound with all lifts & leads (Length of Pile for Payment shall be measured upto bottom of Pile Cap). 27 BORED CAST IN SITU- 300 MM 31103- Meters 1641.81 995454 Yes DIA Boring, Providing and installing Bored cast-in-situ R.C.C. pile of 300 mm diameter & length below the pile cap M25 in Cement Concrete, to carry a safe working load not less than specified, including Chiseling in Hard Rock upto 4D, excluding the cost of steel reinforcement but including the cost of boring with, bentonite solution & temporary casing of appropriate length for setting out & removal of same and the length of the pile to be embedded in the pile cap e.t.c. all complete, including removal of excavated earth from HPCL compound with all lifts & leads (Length of Pile for Payment shall be measured upto bottom of Pile Cap) - .size 300 mm diameter 28 REINFORCEMENT STEEL 31103- Metric Ton 65000 995451 Yes Supply ,fabrication, hoisting and placing in position HYSD reinforcement bars conforming to IS1786 -Latest Edition Minimum Grade FE 415 or higher grade TMT bars of same grade as per detailed drawing and specifications including cutting, bending, cranking and tying with 18 SWG black annealed binding wire complete. The rates shall be applicable for all heights and depths. Payment shall be made as per reinforcement drawings and with theoretical weights only including all authorised laps. No paymenst shall be made for chairs, spacers & hooks.Weight of Binding wire shall not be considered for payment. 29 BRICK MASONRY 31103- Cubic Meters 5628 995454 Yes SUBSTRUCTURE BRICK MASONRY WORKS :Providing and constructing following brick masonry in CM 1:5 using first quality bricks of Class designation 35 (35 KG / SQCM minimum) and conforming to IS-1077-1986 including providing all openings and projections , raking the joints to 1 cm deep, scaffolding, soaking of bricks in water prior to use and curing etc complete as per specifications . 30 BRICK MASONRY 31103- Cubic Meters 6391 995456 Yes SUPERSTRUCTURE BRICK MASONRY WORKS :Providing and constructing following brick masonry in CM 1:5 using first quality bricks of Class designation 35 (35 KG / SQCM minimum) and conforming to IS-1077-1986 including providing all openings and projections , raking the joints to 1 cm deep, scaffolding, soaking of bricks in water prior to use and curing etc complete as per specifications but for superstructure above Plinth level including scaffolding. 31 PARTITION 115 MM-BRICK 31103- Cubic Meters 5317 995456 Yes MASONRY Providing & laying brick masonry as above but for 115 mm thick in partition walls in CM 1:4. Rate to include providing 75 mm thick RCC 1:1.5:3 bands using 4 nos 8 mm dia Torsteel reinforcement with U type 8 mm strips @ 150mm C/C at every 1 M height of wall including plywood/ MS shuttering. Steel reinforcement shall be paid for separately. 32 FLY ASH BRICKS 31103- Cubic Meters 6194 995456 Yes Providing and constructing Fly Ash brick masonry in CM 1:5 using fly ash bricks having minimum compressive strength 75 Kg/sqcm. Job including providing all openings and projections as per the drawing, raking the joints to 1 cm deep, scaffolding, soaking of bricks prior to use and curing etc complete as per specifications .These bricks shall be machine moulded and prepared in plant by appropriate proportion of fly ash and lime. The autoclave fly ash bricks shall conform to IS 12894 33 CONCRETE HOLLOW BLOCKS 31103- Cubic Meters 9452 995456 Yes Providing hollow concrete block (200mm thk) masonary (IS 2572) in cement mortar 1:6 including scaffolding, curing etc. for walls, parapets etc. below and above plinth at all levels, Joints/wall surface prepared either for fair face finish or plastering and including providing concrete, reinforcement and shuttering (where required) at all door and window jambs, openings etc. complete as per specifications. (RCC runners, mullions and transforms shall be measured & paid for separately under Concrete & reinforcement items) 34 RRM SUBSTRUCTURE 31103- Cubic Meters 5480 995456 Yes Providing and constructing random rubble masonry with good quality stone in CM 1:5 for substructure & superstructure as per IS 1597 part 1, latest edition. Rate to include raking the joints to 1 cm deep and curing complete. One Through / Bond stone shall be provided for every square meter of facing , evenly distributed in a staggered pattern. They shall have about 0.03 sqm in face area and shall have a tailing for the full width of masonry upto 600mm.If masonry wall is over 600mm thick, a line of headers (not less than 450mm length) overlapping each other by 150mm shall be laid. Bond stones shall be distinctly marked on its face during construction for verification. Quoin/key/corner stone shall not be less than 0.03 cum in volume. 35 RRM SUPER STRUCTURE 31103- Cubic Meters 5783 995456 Yes Providing and constructing random rubble masonry with good quality stone in CM 1:5 for substructure & superstructure as per IS 1597 part 1, latest edition. Rate to include raking the joints to 1 cm deep and curing complete. One Through / Bond stone shall be provided for every square meter of facing , evenly distributed in a staggered pattern. They shall have about 0.03 sqm in face area and shall have a tailing for the full width of masonry upto 600mm.If masonry wall is over 600mm thick, a line of headers (not less than 450mm length) overlapping each other by 150mm shall be laid. Bond stones shall be distinctly marked on its face during construction for verification. Quoin/key/corner stone shall not be less than 0.03 cum in volume. but FOR SUPERSTRUCTURE including scaffolding 36 RUBBLE SOLLING 230 MM THK 31103- Square Meters 596 995456 Yes Providing and laying dry trap rubble stone soling 230 mm thick including hand packing, filling the interstices with chips, spalls and binding with grit and selected murrum, watering, compacting by power rolling with 8/10 ton roller complete. 37 RUBBLE SOLLING 150 MM THK 31103- Square Meters 506 995456 Yes Providing and laying dry trap rubble stone soling 150 mm thick including hand packing, filling the interstices with chips, spalls and binding with grit and selected murrum, watering & compacting. 38 BRICK ON EDGE 31103- Square Meters 758 995456 Yes Providing & laying brick on edge for pathways with bricks having minimum crushing strength 75 Kg/Cm2 . Bricks shall be laid on edges as per the design pattern & instruction on 12mm thick cement mortar 1:6 bedding joints to be filled with Pointing in 1:3 cement mortar job includes raking the joints to 1 cm deep, soaking of bricks prior to use and curing etc complete as per specifications 39 BRICK PITCHING 31103- Square Meters 580 995456 Yes Providing & laying brick pitching with bricks having minimum crushing strength 35 Kg/Cm2 . Bricks shall be laid on flat as per the instruction on 12mm thick cement mortar 1:6 bedding joints to be filled with 1:3 cement mortar job includes raking the joints to 1 cm deep, soaking of bricks prior to use and curing etc complete as per specifications 40 FLUSH POINTING 31103- Square Meters 224 995456 Yes Providing flush pointing in rubble pitching with 1:3 cement mortar including curing etc. complete. 41 RAISED POINTING 31103- Square Meters 410 995456 Yes Providing raised pointing 12 mm with CM 1:3 along the joints of exposed stone masonry. The joints shall be raked & cleaned, curing etc. all complete. 42 CEILING PLASTERING 6 MM 31103- Square Meters 187 995456 Yes THK SMOOTH CEMENT PLASTER FOR CEILING / CHHAJA / ROOF BEAM : Providing and applying 6 mm thick plaster in CM 1:3 to ceiling and bottom surface of chajja using screened sand including finishing smooth and providing drip moulds at chajja edges and curing etc. complete. Rate shall include providing necessary scaffolding, chicken wire mesh at all joints of brick and concrete surfaces, with a minimum overlap of 150 mm in all directions and curing complete. No extra payment shall be made for additional thickness if required to achieve perfect line and level. 43 PLASTERING 6 MM THK 31103- Square Meters 180 995472 Yes SMOOTH CEMENT PLASTER : Providing and applying 6 mm thick plaster in CM 1:3 over Masonary / Concretes using screened sand including finishing smooth complete. Rate shall include providing necessary scaffolding, chicken wire mesh at all joints of brick and concrete surfaces, with a minimum overlap of 150 mm in all directions and curing complete. No extra payment shall be made for additional thickness if required to achieve perfect line and level. 44 SMOOTHPLASTERING-12MM 31103- Square Meters 219 995472 Yes THK Providing and laying 12mm thick smooth cement plastering in 1:4 CM in single coat to all the interior walls including providing necessary scaffolding, chicken wire mesh at all joints of brick and concrete surfaces with a minimum overlap of 150 mm in all directions and additional thickness if required to achieve perfect line and level, groove cutting without any extra cost. 45 PLASTERING 20MM THK 31103- Square Meters 311 995472 Yes Providing and laying average 20 mm thick sand faced cement plaster in Two Coats including providing necessary scaffolding, chicken wire mesh at all joints of brick and concrete surfaces with a minimum overlap of 150 mm in all directions and additional thickness if required to achieve perfect line and level, groove cutting without any extra cost. Apply 12 mm thick coat of CM 1:4 mixed with approved make water proofing compound mixed as per manufacturer's specifications as 1st coat and leaving the surface rough. Apply 2nd coat of 8 mm thick of CM 1:4 and finishing the surface by rubbing with sponge till uniform texture is obtained. 46 WEEP HOLES 31103- Meters 506 995472 Yes Providing, fabricating and installing in place, 50 mm dia PVC Pipes (4 KG / Sqcm) of various lengths & at places as directed at site on the masonry wall for water drainage with Mesh on Inner side. 47 STRUCTURAL STEEL 31103- Metric Ton 78788.33 995456 Yes Supplying , erecting and fixing in position Pre- fabricated steel structures at all elevations for Canopy using structural steel sections ISMB/ISMC/ISA conforming to IS:2062 , including cutting, welding or bolting, supply of bolts/nuts/washers etc., complete as per drawings including surface preparation and applying one coat of Zinc Phosphate Primer before erection, one coat after erection and two coats of synthetic enamel paint as per specification after erection and all materials and labour complete. ( No welding is permitted at site). The rate quoted shall include cost of bolts, nuts, washers, welding and electrodes and any other consumables required for completing the work. Nutbolts shall not be considered for payment.Theoretical wight of steel sections shall be considered for payment. 48 CHAIN LINK FENCING 31103- Square Meters 475 995477 Yes CHAIN LINK FENCING : Supply and fixing of 10 SWG GI chain link fencing (as per Drawing No 123) to the angle iron post with 8 SWG GI hooks and nuts and railing with 14 SWG GI continuous wire (all details shall be as per enclosed drawing ) up to a height of 1.8 m from the ground level. Rate to include unrolling the bundle, erecting, tightening and fixing at 300 mm C-C on the vertical portion of the posts to every top and bottom railing with 14 gauge MS wire. Angle Post / Concrete Poles would be paid separately.(Refer attached Drawing) 49 PRECASTCONCRETEPOLES- 31103- Each 1150.04 995477 Yes FENCING Supplying & Fixing M25 grade precast concrete poles for fencing with 6mm stirrups welded to four 8MM main vertical reinforcement Size of pole 6'.0" length with bottom section 3"X4'' & top section 3"X3" erecting, placing, grouting in proper line , levelled & painting of the pole with two coats of Acrylic emulsion paint exterior grade over a coat of cement primer etc. completed as per the instruction of Eng. In-Charge(Refer attached Drawing). 50 BARBED WIRE FENCING 31103- Meters 233 995477 Yes BARBED WIRE FENCING Providing and fixing 13 rows horizontal and two diagonals with two ply 12 SWG GI barbed wire fencing with barbes @ 100mm c/c . Angle iron post / Pre-Fab Concrete Poles shall be paid separately. For payment purpose measurement shall be taken for the lenth of plot boundary .(Refer attached Drawing) 51 HUME PIPES-1000 MM DIA 31103- Meters 7043 995424 Yes (NP4) HUME PIPE- Supplying, laying, joining and aligning 1000mm DIA NP4 class RCC Hume pipes conforming to IS-458 Latest Edition below approach road as directed. Rate to include joining with cement mortar, excavation up to required depth and providing and laying PCC 1:2:4 haunching @ 1m c/c , also including cutting, bending & supply and laying of 17 SWG annealed binding wire inside the HUME Pipe for pulling cables in future.Test certificates from manufacture shall be submitted and approved by EIC before use.1000 MM DIA 52 HUME PIPES-900 MM DIA (NP3) 31103- Meters 4389 995424 Yes Supplying, laying, joining and aligning RCC Hume pipes conforming to IS-458 Latest Edition below approach road as directed. Rate to include joining with cement mortar, excavation up to required depth and providing and laying PCC 1:2:4 haunching @ 1m c/c , also including cutting, bending & supply and laying of 17 SWG annealed binding wire inside the HUME Pipe for pulling cables in future.Test certificates from manufacture shall be submitted and approved by EIC before use.HUME PIPES- 900 MM DIA - NP3 53 HUME PIPES-600 MM DIA (NP3) 31103- Meters 1790 995424 Yes Supplying, laying, joining and aligning RCC Hume pipes conforming to IS-458 Latest Edition below approach road as directed. Rate to include joining with cement mortar, excavation up to required depth and providing and laying PCC 1:2:4 haunching @ 1m c/c , also including cutting, bending & supply and laying of 17 SWG annealed binding wire inside the HUME Pipe for pulling cables in future.Test certificates from manufacture shall be submitted and approved by EIC before use.HUME PIPES- 600 MM DIA - NP3 54 HUME PIPES-450 MM DIA (NP 31103- Meters 1132 995424 Yes 3) Supplying, laying, joining and aligning RCC Hume pipes conforming to IS-458 Latest Edition below approach road as directed. Rate to include joining with cement mortar, excavation up to required depth and providing and laying PCC 1:2:4 haunching @ 1m c/c , also including cutting, bending & supply and laying of 17 SWG annealed binding wire inside the HUME Pipe for pulling cables in future.Test certificates from manufacture shall be submitted and approved by EIC before use but size 450 mm dia- NP3 55 HUME PIPES- 300 MM DIA (NP 31103- Meters 731 995424 Yes 3) Supplying, laying, joining and aligning RCC Hume pipes conforming to IS-458 Latest Edition below approach road as directed. Rate to include joining with cement mortar, excavation up to required depth and providing and laying PCC 1:2:4 haunching @ 1m c/c , also including cutting, bending & supply and laying of 17 SWG annealed binding wire inside the HUME Pipe for pulling cables in future.Test certificates from manufacture shall be submitted and approved by EIC before use but size 300 mm dia - NP3 56 HUME PIPES-250 MM DIA (NP 31103- Meters 636 995424 Yes 3) Supplying, laying, joining and aligning RCC Hume pipes conforming to IS-458 Latest Edition below approach road as directed. Rate to include joining with cement mortar, excavation up to required depth and providing and laying PCC 1:2:4 haunching @ 1m c/c , also including cutting, bending & supply and laying of 17 SWG annealed binding wire inside the HUME Pipe for pulling cables in future.Test certificates from manufacture shall be submitted and approved by EIC before usebut size 250 mm dia - NP3 57 HUME PIPES- 200 MM DIA (NP 31103- Meters 539 995424 Yes 2) Supplying, laying, joining and aligning RCC Hume pipes conforming to IS-458 Latest Edition below approach road as directed. Rate to include joining with cement mortar, excavation up to required depth and providing and laying PCC 1:2:4 haunching @ 1m c/c , also including cutting, bending & supply and laying of 17 SWG annealed binding wire inside the HUME Pipe for pulling cables in future.Test certificates from manufacture shall be submitted and approved by EIC before use HUME PIPES- 200 MM DIA NP2 CLASS 58 HUME PIPES-150 MM DIA (NP 31103- Meters 426 995424 Yes 2) Supplying, laying, joining and aligning RCC Hume pipes conforming to IS-458 Latest Edition below approach road as directed. Rate to include joining with cement mortar, excavation up to required depth and providing and laying PCC 1:2:4 haunching @ 1m c/c , also including cutting, bending & supply and laying of 17 SWG annealed binding wire inside the HUME Pipe for pulling cables in future.Test certificates from manufacture shall be submitted and approved by EIC before use HUME PIPES- 150 MM DIA NP2 CLASS 59 ANTI TERMITE TREATMENT 31103- Square Meters 286 995423 Yes ANTI TERMITE TREATMENT Providing anti-termite treatment including diluting and injecting chemical solution/ Neem base solution and creating a continuous barrier under and alround the column pits, wall trenches, basement excavation, top surface of plinth filing, junction of wall and floor, along the external perimeter of building, expansion joints, over the top surface of consolidated earth on which apron is to be laid, surroundings of pipes and conduits etc. Complete as per specification using Clorpyriphous emulsified cocentrate (20%) in 1% concentration ( or as recommended by the manufacturer) or using Neem based solution. 60 CERAMICTILE- 600MMX600MM 31103- Square Meters 1088 995474 Yes CERAMIC TILE FLOORING: Providing and laying matt finish 1st quality Ceramic tiles of 8 mm thick of following size in flooring of approved make and shade and free from cracks, warpage,fissures and flakes with straight edges and perfect corner laid at right angle as per design and pattern over a bedding of cement mortar of 30 mm thick CM 1:5 finishing the joints neatly with white cement mixed with matching colour pigment and finish in all respect and all material and labour complete. 61 CERAMICTILE- 450MMX450MM 31103- Square Meters 934 995474 Yes CERAMIC TILE FLOORING: Providing and laying matt finish 1st quality Ceramic tiles of 8 mm thick of following size in flooring of approved make and shade and free from cracks, warpage,fissures and flakes with straight edges and perfect corner laid at right angle as per design and pattern over a bedding of cement mortar of 30 mm thick CM 1:5 finishing the joints neatly with white cement mixed with matching colour pigment and finish in all respect and all material and labour complete. ;450mmX450mm 62 CERAMICTILE- 300MMX300MM 31103- Square Meters 845 995474 Yes CERAMIC TILE FLOORING: Providing and laying matt finish 1st quality Ceramic tiles of 8 mm thick of following size in flooring of approved make and shade and free from cracks, warpage,fissures and flakes with straight edges and perfect corner laid at right angle as per design and pattern over a bedding of cement mortar of 30 mm thick CM 1:5 finishing the joints neatly with white cement mixed with matching colour pigment and finish in all respect and all material and labour complete. 300mmX300mm 63 VITRIFIEDTILE900MM X 900MM 31103- Square Meters 2075 995474 Yes POLISHED VITRIFIED TILE FLOORING :Providing and laying 1st quality polished vitrified tiles of 10 mm thick of followg.sizes on flooring (approved make&shade, free from cracks, warpage,fissures and flakes, straight edges and perfect corner) laid at right angle as per design and pattern over a 30mm bedding of cement mortar(CM 1:5), finishing the joints neatly with white cement mixed with matching colour pigment and finish in all respect and all material and labour complete. 64 VITRIFIEDTILE600MM X 600MM 31103- Square Meters 1155 995474 Yes POLISHED VITRIFIED TILE FLOORING :Providing and laying 1st quality polished vitrified tiles of 10 mm thick of followg.sizes on flooring (approved make&shade, free from cracks, warpage,fissures and flakes, straight edges and perfect corner) laid at right angle as per design and pattern over a 30mm bedding of cement mortar(CM 1:5), finishing the joints neatly with white cement mixed with matching colour pigment and finish in all respect and all material and labour complete. 600mmX600mm 65 TERRACOTTA TILES 31103- Square Meters 1039.434746 995474 Yes Terracotta Tiles:Providing and fixing terracotta tiles minimum 3 mm thick and minimum 75x150 mm size of approved shade and make First quality , free from crack fissures & flakes with straight edges & perfect corners fixed in true line & level as per the design and pattern advised by Engg.-In-Charge. Rate includes applying 12 mm thick backing plaster in 1:3 CM in true line & level, properly cured & rough finished. Fixing the tiles with neat cement paste and finishing the joints with terracotta paint in a neat & aesthetic way complete in all respects. 66 MANGLORE TILES ON ROOF 31103- Square Meters 2493 995474 Yes /CHAJJA Providing and fixing Mangalore tilesof 12 mm thick and minimum 230x150 mm size of approved shade and make First quality , free from crack fissures & flakes with straight edges & perfect corners fixed in true line & level as per the design and pattern advised by Engg.-In-Charge and finishing the work in a neat & aesthetic way complete in all respects. Rate to include Teakwood framing structure for holding the tiles in fixed condition. 67 MOSAIC TILES 31103- Square Meters 1057 995474 Yes MOSAIC TILES: Supply and fixing mosaic tiles of NITCO make /other approved make in pattern including providing 1:5 CM bed and floating coat of neat cement slurry finishing the joints with white cement , mixed with matchinmg colour pigments, cleaning the surface with dilute sulfuric acid etc complete. 68 GRANITE TILE FLOORING 31103- Square Meters 1552 995474 Yes GRANITE TILE FLOORING Providing and laying 10 mm thick granite tile of size of 400 mm x 400 mm in flooring of approved shade and free from cracks, warpage,fissures and flakes with straight edges and perfect corner laid at right angle as per design and pattern over a bedding of 30 mm thick 1:5 cement mortar and neat cement slurry, finishing the joints neatly with white cement mixed with matching colour pigment and finish in all respect and al l material and labour complete. 69 IPS FLOORING 31103- Square Meters 431 995474 Yes IPS FLOORING Providing mixing and laying 50 mm thick Indian Patent Stone flooring in PCC 1:2:4 mix concrete with 12 mm and down size graded crushed aggregate including providing and fixing 4 x 25 mm size glass strips in 1 metre x 1 metre panels, casting the concrete compacting and finishing the surface smooth using cement slurry. 70 GRANITE SKIRTING 31103- Square Meters 239 995456 Yes GRANITE SKIRTING Providing and fixing 10mm thick skirting of 100 mm hight free from crack fissures & flakes with straight edges & perfect corners fixed at right angles with neat cement paste and finishing the joint with white cement mixed with matching colour pigment . 71 CERMICTILEDADO( 300MMX 31103- Square Meters 942 995474 Yes 200 MM) CERAMIC TILES DADO IN TOILET: Providing and fixing ceramic tiles of 300 x 200 mm size (approved shade and make )First quality , free from crack fissures & flakes with straight edge s & perfect corners fixed at right angles as per the design and pattern, incldg. applying 12mm thick backing plaster in 1:4 CM and fixing the tiles with neatcement paste, finishing the joints with white cement mixed with colouring pigments to match the colour of tiles properly cured & finished in all respects etc. complete. 72 CERMICTILEDADO( 300MMX 31103- Square Meters 1013 995474 Yes 400 MM) CERAMIC TILES DADO IN TOILET: Providing and fixing ceramic tiles of 300 x 400 mm size (approved shade and make )First quality , free from crack fissures & flakes with straight edge s & perfect corners fixed at right angles as per the design and pattern, incldg. applying 12mm thick backing plaster in 1:4 CM and fixing the tiles with neatcement paste, finishing the joints with white cement mixed with colouring pigments to match the colour of tiles properly cured & finished in all respects etc. complete.300mm x 400mm 73 CERMICTILEDADO( 300MMX 31103- Square Meters 1151 995474 Yes 600 MM) CERAMIC TILES DADO IN TOILET: Providing and fixing ceramic tiles of 300 x 600 mm size (approved shade and make )First quality , free from crack fissures & flakes with straight edge s & perfect corners fixed at right angles as per the design and pattern, incldg. applying 12mm thick backing plaster in 1:4 CM and fixing the tiles with neatcement paste, finishing the joints with white cement mixed with colouring pigments to match the colour of tiles properly cured & finished in all respects etc. complete.;300mm x 600mm 74 GRANITE SLAB18 MM BLACK 31103- Square Meters 4848 995456 Yes 18MM THICK GRANITE CLADDING FOR CURTAIN WALL Providing and fixing machine cut and polished black Granite slab of thickness of 18 mm selected & sorted for uniformity in colour, free from cracks, fissures and flakes with straight edges and perfect cornors using 50mmx20mmx3mm SS T shaped cleats of 100mm long . The cleats are fixed over the wall with M12x100mm long GI fasteners by providing 2 nos 12mmx25mm size slots and drilling the wall. Rate to include making necessary grooves in granite slab. 75 HP LOGO FIXING 31103- Each 448 995475 Yes Fixing of HPCL Logo Box in line and level on the Granite curtain wall with the help of necessary fasteners. 76 KOTASTONEFLOOR:600MM X 31103- Square Meters 1327 995456 Yes 600MM KOTA STONE FLOORING Providing and laying 18mm thick Kota Stone flooring using machine cut and machine polished tiles of uniform colour and approved size and pattern including bedding of 30mm thick CM1:3 close jointed and floated with matching cement slurry laid to level as required, curing machine polishing with oxalic acid to achive mirror finish etc., complete. 77 KOTA STONE SKIRTING 31103- Square Meters 1511 995475 Yes KOTA STONE SKIRING Providing and laying 100mm high x 18mm thick Kota stone skiring on the walls in uniform colour and approved size & pattern including bedding of 20mm thick CM1:3 close jointed & floated with matching cement slurry, curing, polishing to mirror finish with oxalic acid etc., complete. 78 KOTA STONE STEPS 31103- Square Meters 1739 995475 Yes KOTA STONE STEPS Providing and fixing 18 mm thick one piece Kota stone slabs with 25mm bedding CM 1:3, cement slurry and machine polishing on one side for risers of steps, treads and shelf slab including nosing etc . complete 79 GRANITE SILL SLAB FOR 31103- Square Meters 4630 995456 Yes WINDOWS SILL SLAB Providing and laying 18 mm thick machine cut & machine polished jet black granite strips over a bedding of 18 mm thick 1:5 CM for window sills. The strips shall be of single piece only as per width of window wall and project 12 mm beyond the face of the wall including nosing etc . complete 80 CONCRETE TILE-WALKWAY 31103- Square Meters 892 995478 Yes Supply and fixing concrete tile of approved make of approved shade of 20mm thickness for flooring including providing 20mm thick 1:5 cement mortar bed and a floating coat of neat cement slurry, finishing the joints with white cement mixed with matching colour pigment, cleaning the surface with dilute sulphuric acid etc. Complete. If necessary, surface unevenness shall be filled up with brick ballast manually compacted with watering etc. complete as per instructions of Engg.-In-Charge without extra cost. Basic rate : Not lower than Rs. 500/sqm. 81 BRICKBAT TERRACE WATER 31103- Square Meters 777 995453 Yes PROOF. BRICKBAT COBA ON TERRACE Providing and laying integral cement based water proofing of average 100 mm thick as per specifications given. The job includes Cleaning of RCC slab and applying neat cement slurry mixed with waterproofing compound, providing and laying brickbat coba in CM 1:4 mixed with water proofing compound and curing for a period of 24 hours, laying of 25 mm thick PCC 1:1.5:3 mix with 6 mm and down size coarse aggregate and water proofing compound, finishing smooth, making half round vata at the junction of parapet wall and slab and curing for 10 days. NOTE:- Contractor to submit a guarantee in respect of performance of waterproofing ,for 10 years on a Stamp-paper. Further , @10% of job amount shall be retained for 2 years as retention money , returnable after retention period without interest . Approved brands of waterproofing compound are : CICO/ACCOPROOF/IMPERMO. 82 INTEGRAL TERRACE 31103- Square Meters 1150 995453 Yes WATERPROOFING Providing and laying integral cement based water proofing of average 100 mm thick as per specifications given below:- cleaning RCC slab and applying two coats of polymer bases Elastometric coating Brush Bond RFX of Fosroc/approved equivalent in SIKA .- providing and laying brickbat coba in CM 1:4 mixed with water proofing compound and curing for a period of 24 hours.-Laying of 20mm thick plastering with 1:4 mixed with Conflast X 421C of Fosroc @125 per bag of cement or approved equivalent in SIKA finishing smooth with neat cement , making half round chamfering at the junction of parapet wall and slab , laying of 12mm thick pressed burnt clay tile( approved by HPCL) with 1:4 Cement mortar and curing for 10 days . The above job to be carried under supervision by reputed water proofing agencies or by authorised applicator.Contractor will be required to submit a guarantee in respect of performance of waterproofing for 10 years on stamp-paper. In addition to this, an amount equal to 10% of cost of waterproofing items shall be retained as retention money for 2 years from the date of completion, which shall be returned only after successful completion of this period. 83 CHAJJA WATER PROOFING 31103- Square Meters 998 995453 Yes BRICKBAT COBA ON TERRACE Providing and laying integral cement based water proofing of average 100 mm thick as per specifications given. The job includes Cleaning of RCC slab and applying neat cement slurry mixed with waterproofing compound, providing and laying brickbat coba in CM 1:4 mixed with water proofing compound and curing for a period of 24 hours, laying of 25 mm thick PCC 1:1.5:3 mix with 6 mm and down size coarse aggregate and water proofing compound, finishing smooth, making half round vata at the junction of parapet wall and slab and curing for 10 days. NOTE:- Contractor to submit a guarantee in respect of performance of waterproofing ,for 10 years on a Stamp-paper. Further , @10% of job amount shall be retained for 2 years as retention money , returnable after retention period without interest . Approved brands of waterproofing compound are : CICO/ACCOPROOF/IMPERMO 84 WHITE WASH 31103- Square Meters 24 995453 Yes WHITEWASH Providing and applying 3 coats of white wash to plastered and concrete surfaces including providing necessary scaffolding, surface preparation , mixing DDL binder, blue etc. complete as per IS: 712- Latest Edition. If additional coats are required to obtain uniform and smooth finish, the same shall be carried out at no extra cost. 85 OIL BOUND DISTEMBER 31103- Square Meters 120 995473 Yes OIL BOUND DISTEMPER Providing and applying 2 coats ( first coat with brush and final coat with Roller) of OBD of approved make and shade on all surfaces and heights to give an even shade including primimg coat and full putty after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth etc., all material and labour complete. General specifications/guidelines given under WHITEWASH item also to be followed, as applicable. 86 ACRYLICEMULSION 31103- Square Meters 90 995473 Yes PAINT(INT/GRD) ACRYLIC EMULSION PAINT (INTERIOR GRADE) Providing and applying 2 coats ( first coat with brush and final coat with Roller) of Acrylic Emulsion paint of approved make and shade on all surfaces and heights to give an even shade including primer and full putty (J K Cement / Birla White) after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth etc., all material and labour complete. General specifications/guidelines given under WHITEWASH item also to be followed, as applicable. 87 ACRYLICEMULSION 31103- Square Meters 114 995473 Yes PAINT(EXT) ACRYLIC EMULSION PAINT (EXTERIOR GRADE) Providing and applying 3 coats of acrylic anti fungal cement paint including primer of approved make & shade to all the exterior surfaces as per manufacturer's specifications including providing necessary scaffolding, curing , etc. complete. If additional coats are required to obtain uniform finish, the same shall be carried out at no extra,cost as directed by Engineer In Charge. General specifications/guidelines given under WHITEWASH item also to be followed, as applicable. 88 PLASTICEMULSION PAINT 31103- Square Meters 131 995473 Yes PLASTIC EMULSION PAINT: Providing and applying 2 coats ( first coat with brush and final coat with Roller) of Plastic Emulsion paint of approved make and shade on all surfaces and heights to give an even shade including primer and compatible putty. Approved Make: Asian/Nitco / Nerolac. General specifications/guidelines given under WHITEWASH item also to be followed, as applicable. 89 WATER PROOFCEMENT PAINT 31103- Square Meters 72 995473 Yes WATER PROOF CEMENT PAINT Providing and applying 2 coats of Cement Paint to plastered and concrete surfaces including providing necessary scaffolding, surface preparation etc. complete. If additional coats are required to obtain uniform and smooth finish, the same shall be carried out at no extra cost. General specifications/guidelines given under WHITEWASH item also to be followed, as applicable. 90 SY. ENML. PAINT OVER WALL 31103- Square Meters 142 995473 Yes SYNTHETIC ENAMEL PAINT OVER WALL Providing and applying 2 coats of synthetic enamel paint 1st quality of approved manufacturer and of required shades on wall to give an even shade including a primer coat. 91 SY.ENML.PAINT OVER 31103- Square Meters 142 995473 Yes STEEL/WOOD SYNTHETIC ENAMEL PAINT OVER STEEL/WOOD SURFACE Providing and applying 2 coats of synthetic enamel paint 1st quality of approved manufacturer and shades on steel surface to give an even shade including two coats of red oxide primer. 92 POP PUNNING 31103- Square Meters 156 995473 Yes ON WALL & CEILING : Providing and applying Plaster of Paris(POP) punning on walls, ceilings, beams and columns to bring the surface in plumb line and level including making the surface smooth etc. complete. The rate shall include preparing the surface with POP and compatible putty to give a smooth finish as per approval of the Engg.-In- Charge. Rate to include cost of scrapping, neuro finish etc. complete if needed. 93 MS GRILL 31103- Kilograms 106 995442 Yes Supply, installation and fixing of Prefabricated MS grill (IS 2062 Latest Edition) using MS flat/structurals / bars / hollow sections / strips / pipes etc as per design given by HPCL and direction of Engg.-In-Charge. Rate to include erection, grouting of posts in PCC 1:1.5:3, painting by two coats of red oxide primer and two coats of synthetic enamel of approved shade. Grouting PCC to be paid separately as per relevant item.(Refer attached Drawing) 94 ANOD.AL.GLZ. DOOR-12MM 31103- Square Meters 3768 995476 Yes GLASS ALUMINIUM GLAZED DOOR WITH 12MM GLASS: Providing and fixing Aluminium glazed door/ fixed glazing With Powder Coated aluminum section of approved colour having coating thickness of minimum 50 micron & minimum wall thickness of not less than 2 mm with extruded built up section of approved make and weight ratio joints mitred ad joint with heavy duty aluminium pressure die cast cleats with fins to match the section of frames conforming to approved section and shutter conforming to approved sections and glazed with 12 mm thick glass fixed to shutter with AL snap beading and neoprene /PVC gaskets/CP brass/Stainless steel screws and fixed to the wall with requisite rawl plugs and screw or with fixing clips or with expansion hold fasteners incldg. required filling up of gaps at junctions,top ,bottom ,sides with PVC/Neoprene felt/Polysulphide sealant/silicon sealant all complete as per advise. Size / Section of Doors & fixed glazing with frames at top & bottom and at two ends of JINDAL or equivalent approved make with section no. 20066 of size 101.6 X 44.45 X 3 with weight of 2.415 Kg/M. Stainless Steel handle of 450mm height with locking arrangement to be provided for main door. The glass should be single piece only. All glass edges shall be grinded and polished smooth as per instructions. The floor spring strut shall be fixed and accommodated in Aluminium section groove. In case of non-availability, approved equivalent make for Al sections is JINDAL. Approval of Engg.-In-Charge shall be taken before using equivalent sections matching next higher dimensions and weight per running metre without extra cost. 95 ANOD.AL.GLZDOOR-12MM 31103- Square Meters 4364 995476 Yes TOUGHENED ALUMINIUM GLAZED DOOR WITH 12MM TOUGHENED GLASS: : Providing and fixing Aluminium glazed door/ fixed glazing With Powder Coated aluminum section of approved colour having coating thickness of minimum 50 micron & minimum wall thickness of not less than 2 mm with extruded built up section of approved make and weight ratio joints mitred ad joint with heavy duty aluminium pressure die cast cleats with fins to match the section of frames conforming to approved section and shutter conforming to approved sections and glazed with 12 mm thick glass fixed to shutter with AL snap beading and neoprene /PVC gaskets/CP brass/Stainless steel screws and fixed to the wall with requisite rawl plugs and screw or with fixing clips or with expansion hold fasteners incldg. required filling up of gaps at junctions,top ,bottom ,sides with PVC/Neoprene felt/Polysulphide sealant/silicon sealant all complete as per advise. Size / Section of Doors & fixed glazing with frames at top & bottom and at two ends of JINDAL or equivalent approved make with section no. 20066 of size 101.6 X 44.45 X 3 with weight of 2.415 Kg/M. Stainless Steel handle of 450mm height with locking arrangement to be provided for main door. The glass should be single piece only. All glass edges shall be grinded and polished smooth as per instructions. The floor spring strut shall be fixed and accommodated in Aluminium section groove. In case of non-availability, approved equivalent make for Al sections is JINDAL. Approval of Engg.-In-Charge shall be taken before using equivalent sections matching next higher dimensions and weight per running metre without extra cost. -12 mm toughened glass. 96 PDR.COAT.AL GLZ. FIXED- 31103- Square Meters 3866 995476 Yes 10MM ALUMINIUM GLAZED DOOR WITH 10MM GLASS: Providing and fixing Aluminium glazed door/ fixed glazing With Powder Coated aluminum section of approved colour having coating thickness of minimum 50 micron & minimum wall thickness of not less than 2 mm with extruded built up section of approved make and weight ratio joints mitred ad joint with heavy duty aluminium pressure die cast cleats with fins to match the section of frames conforming to approved section and shutter conforming to approved sections and glazed with 12 mm thick glass fixed to shutter with AL snap beading and neoprene /PVC gaskets/CP brass/Stainless steel screws and fixed to the wall with requisite rawl plugs and screw or with fixing clips or with expansion hold fasteners incldg. required filling up of gaps at junctions,top ,bottom ,sides with PVC/Neoprene felt/Polysulphide sealant/silicon sealant all complete as per advise. Size / Section of Doors & fixed glazing with frames at top & bottom and at two ends of JINDAL or equivalent approved make with section no. 20066 of size 101.6 X 44.45 X 3 with weight of 2.415 Kg/M. Stainless Steel handle of 450mm height with locking arrangement to be provided for main door. The glass should be single piece only. All glass edges shall be grinded and polished smooth as per instructions. The floor spring strut shall be fixed and accommodated in Aluminium section groove. In case of non-availability, approved equivalent make for Al sections is JINDAL. Approval of Engg.-In-Charge shall be taken before using equivalent sections matching next higher dimensions and weight per running metre without extra cost. 97 HY. FLOOR SPRING 31103- Each 5031 995476 Yes HYDRAULIC FLOOR SPRINGS Providing and fixing double action hydraulic floor springs( Heavy duty) of approved brand conforming to IS 6315 : 1992 for aluminium doors. Rate to include cutting of floors as required, embedding in floors and cover plates etc complete as per specifications. Load Capacity = 61-80 kg 98 AL. PANELLED DOOR 31103- Square Meters 4055 995476 Yes ALUMINIUM PANELED DOOR : Providing and fixing Powder Coated aluminum section of approved colour having coating thickness of minimum 50 micron & minimum wall thickness of not less than 2 mm, joints mitred and jointed with heavy duty aluminium pressure die cast cleats with fins to match the outer frames and door frames conforming JINDAL sections as specified fully paneled with 9 mm thick pre-laminated 3 layers medium density ( exterior grade) particle board Grade-1, type -II conforming to IS:12823 bonded with phenolformaldehyde synthetic resin of approved brand and manufacturer fixed to shutter with aluminium snap beading and neoprene / PVC gasket / CP Brass /stainless steel screws fixed to the wall with requisite rawl plugs and screw or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top , bottom and sides with requisite PVC/neoprene felt/polysulphide sealant/silicon sealant including hard ware such as tower bolt of 150 mm length from inside and Aluminum handle and Aluminum aldrop of 200 mm length. on both sides, 3 nos. Aluminium hinges of 100 mm length etc all complete as per architectural drawing. Aluminium door section of JINDAL make or equivalent make with the following section : Main frame on all sides - 4700 (20102) -101.6 x 44.45 x 2.5 of weight 1.977 kg/m Shutter vertical frame- 4537 - (19516) 53.7x44.45x2.3 of weight 1.238 kg/m. Shutter top frame - 4540 - (19518) 53.7x44.45x2.3 of weight 1.173 kg/m. Shutter middle frame - 4621 (20014) - 49.91x44.45x3 of weight 1.495 kg/m Shutter bottom frame - 4524 -(19508) 83.5x44.45x3 of weight 2.107 kg/m, aluminium Cast Door handle and Clip - 4420 (19360) - 19x17.3x0.9 of weight 0.124 kg/m. In case of non-availability, approved equivalent make for Al sections is HINDALCO. Approval of Engg.-In-Charge shall be taken before using equivalent sections matching next higher dimensions and weight per running metre without extra cost. 99 AL. WINDOWS OPENABLE 31103- Square Meters 4472 995476 Yes Providing and fixing 50 micron powder coated aluminium glazed windows with 5 mm glass & extruded built up section of wall thickness not less than 1.4 mm and approved make with glass panel fixed to side -hung shutter with aluminium snap beading and neoprene / PVC gasket / CP Brass /stainless steel screws fixed to the wall with requisite rawl plugs and screw or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions at top , bottom and sides with requisite PVC / neoprene felt / polysulphide sealant/silicon sealant including heavy duty handle cum locking arrangement etc all complete as per architectural drawing and the direction of Engg.In-charge. Two Track Window: Top & Side - 8933 (20829) -1.5 mm thick @ 1.06 kg/m; Bottom (Bulb) - 8934 (20832) - 1.5 mm thick @ 1.248 kg/m 100 AL. SLIDING WINDOWS 3 31103- Square Meters 3144 995476 Yes TRACK ALUMINIUM WINDOWS (SLIDING) : Providing and fixing 50 micron powder coated aluminium glazed windows with 5 mm glass & extruded built up section of wall thickness not less than 1.4 mm and approved make with glass panel fixed to side -hung shutter with aluminium snap beading and neoprene / PVC gasket / CP Brass /stainless steel screws fixed to the wall with requisite rawl plugs and screw or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions at top , bottom and sides with requisite PVC / neoprene felt / polysulphide sealant/silicon sealant including heavy duty handle cum locking arrangement etc all complete as per architectural drawing and the direction of Engg.In-charge. Aluminium sliding windows of Jindal make shutter sections: Top & Bottom - 8820 (20736) - 1.5 mm thick @ 0.547 kg/m; Handle Section 8822 (20738) - 1.5 mm thick @ 0.547 kg/m; Shutter Interlock 8821(20737) - 1.45 mm thick @ 0.607 kg/m. Rate includes wheels/bearings, interlocking arrangements etc. complete. The track section shall be as follows: Two Track Window: Top & Side - 8931 (20829) -1.5 mm thick @ 0.784 kg/m; Bottom (Bulb) - 8932 (20830) - 1.5 mm thick @ 0.909 kg/m 101 AL. SLIDING WINDOWS 2 31103- Square Meters 2814 995476 Yes TRACK ALUMINIUM WINDOWS(SLIDING) : Providing and fixing 50 micron powder coated aluminium glazed windows with 5 mm glass & extruded built up section of wall thickness not less than 1.4 mm and approved make with glass panel fixed to side -hung shutter with aluminium snap beading and neoprene / PVC gasket / CP Brass /stainless steel screws fixed to the wall with requisite rawl plugs and screw or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions at top , bottom and sides with requisite PVC / neoprene felt / polysulphide sealant/silicon sealant including heavy duty handle cum locking arrangement etc all complete as per architectural drawing and the direction of Engg.In-charge. Two Track Window: Top & Side - 8933 (20829) -1.5 mm thick @ 1.06 kg/m; Bottom (Bulb) - 8934 (20832) - 1.5 mm thick @ 1.248 kg/m 102 AL. LOUVERED VENTILATOR 31103- Square Meters 3005 995463 Yes ALUMINIUM LOUVERED VENTILATOR : Providing and fixing 15 micron colour anodised/powder coated aluminium ventilator with extruded built up section of wall thickness not less than 1.5 mm and approved make glazed with 5 mm thick opaque glass louver 100mm wide. 103 STEEL WINDOWS 31103- Square Meters 3270 995476 Yes STEEL WINDOWS : Supply, fabrication and fixing of MS glazed windows using approved Z sections with 5mm plain glass including providing grill with 12mm square bar @100mm c/c , painting with two coats of red oxide primer and two coats of synthetic enamel paint, handle , stay arrangement etc. complete(Refer attached Drawing). 104 STEEL DOORS 31103- Square Meters 2386 995476 Yes STEEL DOORS : Supply, fabrication and fixing of MS Door using 35x35x5 angle frame and 25x25x3 angle members including bracings with 16 gauge MS sheet stitch welded to Door shutter frame complete as per direction of Engg.-In-Charge painting with two coats of red oxide primer and two coats of synthetic enamel paint, handle , stay arrangement ,tower bolt etc. complete.(Refer attached Drawing) 105 FLUSH DOOR 900X2100MM: 31103- Each 5976 995476 Yes Providing and fixing solid core flush door in single leaf 35mm thick commertial plywook of seasoned wood without ventilator. Door frame to be made of 60mm x 100mm teak wood with wrough iron hold fasts. Door to be fitted with brass fitting-hinges, handles on both sides, tower bolts, etc., complete. Frame to be painted in three coats of synethic enamel paint over a coat of wood primer including scrapping, surface preparation etc., complete.Door(leaf) to be laminated on both sides with laminations 1.5 mm thk and grey in color of approved make/brand.Size 900X2100mm(Refer attached Drawing) 106 FLUSH DOOR - 750X2100MM 31103- Each 4980 995476 Yes Providing and fixing solid core flush door in single leaf 35mm thick commertial plywook of seasoned wood without ventilator. Door frame to be made of 60mm x 100mm teak wood with wrough iron hold fasts. Door to be fitted with brass fitting-hinges, handles on both sides, tower bolts, etc., complete. Frame to be painted in three coats of synethic enamel paint over a coat of wood primer including scrapping, surface preparation etc., complete.Door(leaf) to be laminated on both sides with laminations 1.5 mm thk and grey in color of approved make/brand.Size - 750x2100mm(Refer attached Drawing) 107 ROLLING SHUTTER 31103- Square Meters 3759 995454 Yes ROLLING SHUTTER Supply, fabrication and fixing of MS rolling shutter of the following specifications including grill window of 300 mm height at eye level for visibility even in closed position. Code: Conforming to IS 6248 1979 Type: Self Coiling type (manual) Curtains: Interlocking cold rolled lath section of 0.8 mm thickness. Lock plate : MS sheet of 3.15 mm thick reinforced with MS angles of 35 x 35 mm. Guide channel : MS sheets of 3.5 mm thick Bracket Plate : MS Sheet of 0.9 mm thick. Hood Covers : MS sheet of 0.9 mm thick Locking handle : To be provided suitably. Rate shall include providing and fixing holdfasts and painting two coats of enamel paint of approved make and shade over two coats of zinc phosphate primer. Shutter up to 10 SQM -push pull type hand operated with ball bearings , For 10 SQM upto 30 SQM- Mechanical operated gear type with ball bearing, a pulling hook shall be provided for each of the rolling shutter. (Refer attached Drawing) 108 GRILL IN ROLLING SHUTTER 31103- Square Meters 3780 995468 Yes GRILL IN ROLLING SHUTTER : Supply, fabrication and fixing of manually operated steel rolling net shutter as per the specification. Nets to be in hexagonal pattern, The round MS bars used for jali should be 8mm in dia . All other specification as that of item for rolling shutter above.(Refer attached Drawing) 109 MS FAN HOOKS 31103- Each 140 995454 Yes FAN HOOKS : Providing & fixing MS fan hooks with 16 mm dia MS bar bent to shape with hooked ends in RCC Slab during laying including painting the exposed portion. 110 MORTICE LOCK 31103- Each 1127 995476 Yes MORTICE LOCK Providing & fixing GODREJ make only six lever lock ( Cylindrical/ Round Head ) including all necessary hardware etc. 111 DOOR CLOSER 31103- Each 1123 995476 Yes DOOR CLOSER Providing and fixing Heavy duty door closer. of approved make size no. 2. 112 NONASBESTOS CEMENT 31103- Square Meters 631 995453 Yes SHEET-ROOF Supply , erection and fixing of corrugated asbestos free cement sheet of approved make including supply and fixing of bitumen/GI washer, J bolt etc complete as per manufacturer's recommendations. 113 NONASBESTOS CEMENT 31103- Square Meters 395.29 995453 Yes SHEET -SIDE Supply , erection and fixing of corrugated asbestos free cement sheet of approved make including supply and fixing of bitumen/GI washer, J bolt etc complete as per manufacturer's recommendations- but for side sheet including gable end. 114 BARRICADING 31103- Square Meters 1350.212712 995453 Yes Providing & Fixing in position 8' HT GI sheet ( 22 swg) with angle support (50x50x5 mm ) at every 2.4 m c/c and horizontal support of 40x40x5 angle at equal distance for 8' ht &. The Job includes grouting vertical angle supports in RCC 1:2:4, fixing the sheets with necessaru J hooks, painting with synthetic enamel paint in Yellow and Black strip combination, and dismantling & disposing off the entire material after completion of work.(Refer attached Drawing) 115 GY. BOARD FALSE CEILING 31103- Square Meters 915 995453 Yes Providing and fixing Gyp board false ceiling with required accessories of APPROVED MAKE including painting with two coats of plastic emulsion paint. 12.5 mm thick 'Gypboard' shall be screw-fixed to the underside of suspended GI grid. GI grid shall be installed as per manufacturer's specifications. GI grid shall consist of ceiling sections (India Gypsum Code no. MF5) at maximum c/c distance 450 mm, Perimeter channel (India Gypsum code no. MF6A), intermediate channels (India Gypsum code no. MF7) at maximum c/c distance 1200 mm. The ceiling sections should be fixed to intermediate channels with connecting clips (India Gypsum code no. ME9). GI grid shall be fixed to RCC slab above with the help of 25x0.5 mm strap hanger (India Gypsum code no. MF 8) and soffit cleat (India Gypsum code no. P534). The joints between soffit cleat and strap hanger and GI grid & strap hanger shall be with 6.4x12.7 mm nut and bolt (India Gypsum code no. P526). Soffit cleat shall be fixed to RCC ceiling with W.E. type 12 mm dia, 17/16" long steel rawl plug. Maximum c/c distance (both ways) of strap hangers shall be 1200 m. The Gypboard shall be fixed fixed to GI grid with 25 mm long Drawall screws. The Gypboard to be used shall be 12.5 mm thick tapered edge boards. The boards shall be taped & filled from underside to ceiling. 116 MINARAL FIBRE FALSE 31103- Square Meters 1882.51 995453 Yes CEILLING Providing and fixing Mineral Fibre board false ceiling ( APPROVED Make) with required accessories including fixing of the GI channels (18 guage), fixing of the sheets in pattern , in proper line & level, filling the joint with sealent etc. complete as per the satisfaction of EIC. 117 EUROPEAN TYPE W/C - WALL 31103- Each 12144 995462 Yes EUROPEAN TYPE Supplying and fixing Pastel Colour wall mounted vitreous china European type water closet comprising of the following accessories including cutting and making good the walls & floors wherever required complete as directed by Engg.-In-Charge, having following (A) Pastel Colour vitreous china European water closet with P or S trap of approved make having integral matching conceled cistern supplied as part of the closet with all mechanisms, with necessary fittings, brackets, screws, etc all complete as per the direction of Engg.-In-Charge.(B) 15mm NB CP brass angle valve of approved brand as per the direction of Engg.-In-Charge (C) 15 mm NB CP brss inlet connection with Brass unions at the ends. (D) Approved make matching colour polypropylene seat cover with necessary brass hinges and rubber bushes etc (E) WC connector with neoprene rubber etc. 118 EUROPEANTYPE W/C - FLOOR 31103- Each 7753 995462 Yes WATER CLOSETS EUROPEAN TYPE Supplying and fixing Pastel colour vitreous china European type water closet comprising of the the following accessories including cutting and making good the walls & floors wherever required compleste as directed by Engineer In Charge A) Coloured ( pastel colour) viterous china pedestal type European water closet with P or S trap of Hindware sanitaryware standard model or equivalent approved make as per the direction of Engineer In Charge. B) 15mm NB brass angle valve of approved brand as per the direction of Engineer In Charge C) 15 mm NB CP inlet connection with Brass unions at the ends. D) Commander make or equivalent matching colour polypropylene seat cover with necessary brass hinges and rubber bushes etc E) WC connector with neoprene rubber etc F) 10 litres capacity low level plastic cistern of matching colour parry slimline make or approved equivalent with necessary fittings, brackets, screws, etc all complete. 119 INDIAN TYPE W/C 31103- Each 3403 995462 Yes INDIAN WATER CLOSET Supplying and fixing pastel coloured vitreous china Orissa Pan type water closet comprising of the the following accessories including cutting and making good the walls & floors wherever required complete as directed by Engineer In Charge. A)Coloured (pastel colour) viterous china 580 mm orissa pan water closet of Hinduatn sanitaryware or any equivalent make with P or S trap. B) 10 litres capacity hi-grade engineering plastic low level flushing cistern of matching colour Parry Slimline make model 8068 or approved equivalent make with necessary fittings , brackets , screws etc. all complete . C) 32 mm PVC flush pipe 10 Kg/Sqcm quality of approved lengt with necessary fittings ,clamps etc. D) 15 mm NB CP inlet connections with brass union at the ends E) 15 mm NB brass angle valve as per ISI of approved brand as per the direction of Engineer In Charge F) WC connector with neoprene rubber\. Approved Equiv. - Hindware Cat. 20004 with equivalent low level cistern 120 URINALS 31103- Each 4935 995462 Yes URINALS : Supplying and fixing colored ( pastel coloures) vitreous china flat back urinal of size 300 mm x 400 mm with integrated overflow of Hindustan Sanitory or equivalent approved make with CP flush valve , CP pipe connection , CP waste coupling , CP Brass bottle trap of Jaquar mak, 32 mm PVC waste line of required length etc all complete as per the direction of engineer in charge. 121 LARGE URINALS 31103- Each 11752 995462 Yes Supplying and fixing coloured (pastel colours) viterous china flat back urinal of large size with integrated overflow system of approved make with Spreaders,CP flush valve, CP pipe connection, CP waste coupling , CP Brass bottle trap of Jaquar make, 32 mm PVC waste line of required length etc. all complete as per the direction of Engineer In Charge 122 URINALS WITH BUILT IN 31103- Each 15623.3 995462 Yes SENSORS Supplying and fixing coloured (pastel colours) viterous china flat back urinal of large size with integrated auto flush system with CP flush valve of Jaqaur make, cp pipe connection, CP waste coupling , CP Brass bottle trap of Jaquar make, 32 mm PVC waste line of required length etc. all complete as per the direction of Engineer In Charge 123 URINAL DIVISIONAL PLATE 31103- Each 1420 995476 Yes URINAL DIVISION PLATE Providing and fixing 1200 x 450 x 18 mm size granite partition plate between urinals including cutting masonary/concrete surface to required size, fixing the division plate on the ceramic tiles by means of SS clamps, nuts & bolts, polishing all exposed surface etc all complete as directed by Engineer In Charge. (Refer attached Drawing) 124 URINAL DIV.PLATE- CERAMIC 31103- Each 1730 995476 Yes URINAL DIVISION PLATE Providing and fixing of APPROVED MAKE ceramic divisor plate between urinals including cutting masonary/concrete surface to required size, fixing the division plate on the ceramic tiles by means of as per Mfr's recommendations in all respects complete as directed by Engineer In Charge. 125 URINALS SENSORS 31103- Each 7451.161017 995462 Yes Supply, installation and commissioning all complete Jaquar make Sensotronic Concealed type Flushing system (Model 51087 - Chrome) including all accessories, all connections, electricals etc. all complete as per the direction of Engg.-In-Charge. 126 HAND WASH BASIN 31103- Each 6760.3 995462 Yes HAND WASH BASIN Providing and fixing coloured (pastel colours) wash basins of size 550 x 400 without pedestal Including the following accessories: -15mm brass CP Jaquar make (Cat.no.093) stop cock -1 No . -15mm CP connections from the above stop cock to pillar cock - 1 No. -32mm dia waste coupling, CP brass chain and rubber stopper. -30mm Dia. bottle trap Jaquar make with cleaning eye, extension piece and wall flange. -Providing and fixing brass CP Jaquar make 13mm half turn pillar cock.(Cat. no.011)Rate to include supply , painting and fixing of necessary CI brackets with nuts and bolts and fixing the wash basin with all necessary connections in walls . 127 COUNTERTOP WASHBASIN 31103- Each 6529.39 995462 Yes OVAL TYPE Providing & fixing colored COUNTER TOP washbasin :OVAL below Counter Basin 550 0418 of Parryware/10016 HINDWARE Or appoved equivalent including all the required accessories like: -15mm brass CP Jaquar make (Cat.no.093) stop cock -1 No . -15mm CP connections from the above stop cock to pillar cock - 1 No. -32mm dia waste coupling, CP brass chain and rubber stopper. -30mm bottle trap Jaquar make with cleaning eye, extension piece and wall flange. -Providing and fixing brass CP Jaquar make 13mm half turn pillar cock.(Cat. no.011) 128 CP TOWEL RING 31103- Each 1117.3 995462 Yes Providing and fixing in position CP TOWEL RING CP mounted on wall of approved make 129 AUTOMATIC HAND DRYER 31103- Each 4443.983051 995468 Yes Providing, fixing and commissioning fully automatic hand dryer i.e. autostart on positioning the hand and autostop. Care shall be taken so that tiling is not damaged while installation. Rate includes PVC insulated power chord having copper conductor and Anchor ROMA make 3 pin power plug matching ampere load of instrument. Make - Technocrats (Model Alpha AP-800) or Euronics (Model CYC 30) 130 AUTO FRESHENER 31103- Each 2140.991525 995462 Yes Providing, fixing and commissioning fully automatic aerosol dispenser (Auto Freshener). The price includes spray fragrance cam with approved aroma etc. complete. Rate includes PVC insulated power chord having copper conductor and Anchor ROMA make 3 pin power plug matching ampere load of instrument. Care shall be taken so that tiling is not damaged while installation. Make - Technocrats (Model Deluxe) 131 AUTOMATIC SHOE POLISH 31103- Each 8433.872881 995468 Yes MACHINE Providing, fixing and commissioning fully automatic shoe polish machine with electronic eye (infra red sensor) having both separate black and brown rollers. The machine shall start automatically when shoe is placed and automatically stop. Rate includes PVC insulated power chord having copper conductor and Anchor ROMA make 3 pin power plug matching ampere load of instrument. Care shall be taken so that finishing is not damaged while installation. Make - Technocrats (Model Executive Deluxe) 132 SS GRAB BAR DESIGN A/B 31103- Meters 697.69 995477 Yes SS GRAB BAR (A) and (B):Fabricating and fixing S. S. Railing with 40 mm dia MS Piperail & using 10X10 MS bar welded to Balaster ( diagonal pieces) and 20 x 20 MS Baluster as per the drawing. (GRAB BAR A &B).The item includes fabrication, buffing of the railing upto req. finish, fixing the railing at position with m20 grade concrete, finising the SURFACE properly etc. complete(Refer attached Drawing) 133 SS STAIRCASE RAILING 31103- Meters 2083 995477 Yes SS STAIRCASE RAILING ::Fabricating and fixing S. S. Railing with 40 mm dia MS Piperail & using 10X10 MS bar welded to Balaster ( diagonal pieces) and 20 x 20 MS Baluster as per the drawing. .The item includes fabrication, buffing of the railing upto req. finish, fixing the railing at position with m20 grade concrete, finising the SURFACE properly etc. complete(Refer attached Drawing) 134 MIRROR 600X600X5.5 31103- Each 1033 995471 Yes MIRROR Providing and fixing bevelled edge mirror of superior glass of 5.5 mm thick & 600 x 600 mm size of BELGIUM GLASS or any other equivalent make, 3mm thick felt backing or 6 mm asbestos sheet or with wooden beads allround of specified size and fixed with wooden plugs with CP brass screws and cup washers etc all complete as directed by Engineer In Charge 135 MIRROR 5.5 MM THK 31103- Square Meters 2869 995471 Yes Providing and fixing beveled edge mirror of superior glass of 5.5 mm thick of BELGIUM GLASS or any other equivalent make, craft paper, 3mm thick felt backing or 6 mm asbestos sheet. Teak Wood beads 25x40 mm as per approved shape/drawing allround and fixed with wooden plugs with CP brass screws and cup washers etc all complete as directed by Engg.-In-Charge.(Refer attached Drawing) 136 SOAP TRAY 31103- Each 829 995462 Yes SOAP TRAY Providing and fixing readymade CP brass soap tray near wash basin with CP brass screws of approved make. 137 LIQUID SOAP DISPENSERS 31103- Each 2617.1 995462 Yes LIQUID SOAP DISPENSERS Providing and fixing readymade CP brass liquid soap dispenser near wash basin with CP brass screws of approved make. 138 TOILET PAPER HOLDER 31103- Each 775 995462 Yes TOILET PAPER HOLDER Supplying and fixing of 150 x 150 mm pastel coloured toilet paper holder of Hindustan Sanitary ware or equivalen approved make at required position and elevation as directed. Rate to include making good the chases in walls after fixing the above. 139 TOWEL RAIL 31103- Each 1688.7 995468 Yes TOWEL RAIL Providing and fixing CP brass towel rail of 20 mm dia and 600 mm long including all accessories such as brackets (coloured), fixed and anchoring etc. complete as directed. 140 15MM DIA STOP COCKS 31103- Each 602 995462 Yes Providing and fixing in position CP brass stop cock of heavy type ISI marked of approved make. Size 15mm diameter 141 15MM DIA BIB COCKS 31103- Each 782 995462 Yes Providing and fixing in position CP brass bib cock of heavy type ISI marked of approved make. Size 15mm diameter 142 15MM DIA PILLAR COCKS 31103- Each 893 995462 Yes Providing and fixing in position CP brass pillar cock of heavy type ISI marked of approved make. Size 15mm diameter 143 15MM DIA HALF TURN COCKS 31103- Each 773.6 995462 Yes Providing and fixing in position CP brass half turn cock of heavy type ISI marked of approved make. Size 15mm diameter 144 HEALTH FAUCET (HYGI 31103- Each 893 995462 Yes SPRAY) Providing and fixing in position CP brass Hygi Spray of Parryware make Model T9929G1 inclusive of all fixtures, fittings and fasteners making operational complete. Approved Equivalent Make - Hindware 145 15MM DIA CONCEALED GI 31103- Meters 364 995424 Yes PIPE Providing & fixing followg. size medium duty GI pipes of approved make conforming to IS-1239 concealed in the walls/under the concrete floors including making chases in the walls/concrete floors,fixing with clamps at every 1m c-c, necessary tees,bends,elbows,plugs,nipples,unions,testing of pipelines for leaks upto a pressure of 6 Kg/sq cm , painting the pipes with hot bitumen, wrapping the pipes with hessian cloth and making chases of the walls good after piping complete. 146 20MM DIA CONCEALED GI 31103- Meters 404 995424 Yes PIPE Providing & fixing followg. size medium duty GI pipes of approved make conforming to IS-1239 concealed in the walls/under the concrete floors including making chases in the walls/concrete floors,fixing with clamps at every 1m c-c, necessary tees,bends,elbows,plugs,nipples,unions,testing of pipelines for leaks upto a pressure of 6 Kg/sq cm , painting the pipes with hot bitumen, wrapping the pipes with hessian cloth and making chases of the walls good after piping complete. size 20 mm dia 147 15MM DIA EXPOSED GI PIPE 31103- Meters 243 995424 Yes Providing & fixing followg. size medium duty GI pipes of approved make conforming to IS-1239 laying in open on brick or RCC surface with the help of MS 'U' clamps at every 1 m and at every turn.on the walls/concrete floors,fixing with clamps at every 1m c-c, necessary tees,bends,elbows,plugs,nipples,unions,testing of pipelines for leaks upto a pressure of 6 Kg/sq cm , painting the pipes with hot bitumen, good after piping complete. 148 20MM DIA EXPOSED GI PIPE 31103- Meters 294 995424 Yes Providing & fixing followg. size medium duty GI pipes of approved make conforming to IS-1239 laying in open on brick or RCC surface with the help of MS 'U' clamps at every 1 m and at every turn.on the walls/concrete floors,fixing with clamps at every 1m c-c, necessary tees,bends,elbows,plugs,nipples,unions,testing of pipelines for leaks upto a pressure of 6 Kg/sq cm , painting the pipes with hot bitumen, good after piping complete.20MM DIA EXPOSED GI PIPE 149 25MM DIA EXPOSED GI PIPE 31103- Meters 376 995424 Yes Providing & fixing followg. size medium duty GI pipes of approved make conforming to IS-1239 laying in open on brick or RCC surface with the help of MS 'U' clamps at every 1 m and at every turn.on the walls/concrete floors,fixing with clamps at every 1m c-c, necessary tees,bends,elbows,plugs,nipples,unions,testing of pipelines for leaks upto a pressure of 6 Kg/sq cm , painting the pipes with hot bitumen, good after piping complete.25MM DIA EXPOSED GI PIPE 150 32 MM DIA EXPOSED GI PIPE 31103- Meters 458 995424 Yes Providing & fixing followg. size medium duty GI pipes of approved make conforming to IS-1239 laying in open on brick or RCC surface with the help of MS 'U' clamps at every 1 m and at every turn.on the walls/concrete floors,fixing with clamps at every 1m c-c, necessary tees,bends,elbows,plugs,nipples,unions,testing of pipelines for leaks upto a pressure of 6 Kg/sq cm , painting the pipes with hot bitumen, good after piping complete size 32mm dia 151 40 MM DIA EXPOSED GI PIPE 31103- Meters 551 995424 Yes SUPPLY AND LAYING OF GI LINE OF SIZE 1.5 TO BE LAID IN THREADED CONNECTION FOR TANK 11,12,13,14 MANIFOLD 152 UPVC PIPE 40 MM DIA 31103- Meters 161 995424 Yes 4KG/SQCM Providing and laying unplasticised polyvinyl chloride (UPVC) pipes of class IV or as applicable conforming to IS 4985:2000/ IS 15328 : 2003/ IS 13592 : 1992 Type B/ BS 4514/ BS EN 1329, latest edition including all necessary fittings conforming to IS 14735 : 1999/ BS 4514/ BS EN 1329, latest edition and other accessories including connections etc., complete as per drawings or as directed at site. Size 40 mm diameter. 153 UPVC PIPE 15 MM DIA 31103- Meters 132 995424 Yes 4KG/SQCM Providing and laying unplasticised polyvinyl chloride (UPVC) pipes of class IV or as applicable conforming to IS 4985:2000/ IS 15328 : 2003/ IS 13592 : 1992 Type B/ BS 4514/ BS EN 1329, latest edition including all necessary fittings conforming to IS 14735 : 1999/ BS 4514/ BS EN 1329, latest edition and other accessories including connections etc., complete as per drawings or as directed at site. Size15MM 154 UPVC PIPE 20 MM DIA 31103- Meters 140 995424 Yes 4KG/SQCM Providing and laying unplasticised polyvinyl chloride (UPVC) pipes of class IV or as applicable conforming to IS 4985:2000/ IS 15328 : 2003/ IS 13592 : 1992 Type B/ BS 4514/ BS EN 1329, latest edition including all necessary fittings conforming to IS 14735 : 1999/ BS 4514/ BS EN 1329, latest edition and other accessories including connections etc., complete as per drawings or as directed at site.20MM 155 UPVC PIPE 25 MM DIA 31103- Meters 153 995424 Yes 4KG/SQCM Providing and laying unplasticised polyvinyl chloride (UPVC) pipes of class IV or as applicable conforming to IS 4985:2000/ IS 15328 : 2003/ IS 13592 : 1992 Type B/ BS 4514/ BS EN 1329, latest edition including all necessary fittings conforming to IS 14735 : 1999/ BS 4514/ BS EN 1329, latest edition and other accessories including connections etc., complete as per drawings or as directed at site.25MM 156 UPVC PIPE 32MM DIA 31103- Meters 176 995424 Yes 4KG/SQCM Providing and laying unplasticised polyvinyl chloride (UPVC) pipes of class IV or as applicable conforming to IS 4985:2000/ IS 15328 : 2003/ IS 13592 : 1992 Type B/ BS 4514/ BS EN 1329, latest edition including all necessary fittings conforming to IS 14735 : 1999/ BS 4514/ BS EN 1329, latest edition and other accessories including connections etc., complete as per drawings or as directed at site.32MM 157 UPVC PIPE 50 MM DIA 31103- Meters 257 995424 Yes 4KG/SQCM Providing and laying unplasticised polyvinyl chloride (UPVC) pipes of class IV or as applicable conforming to IS 4985:2000/ IS 15328 : 2003/ IS 13592 : 1992 Type B/ BS 4514/ BS EN 1329, latest edition including all necessary fittings conforming to IS 14735 : 1999/ BS 4514/ BS EN 1329, latest edition and other accessories including connections etc., complete as per drawings or as directed at site.50MM 158 CPVC PIPING( IS 15778)-15 MM 31103- Meters 194 995424 Yes supply and laying chlorinated polyvinyl chloride (CPVC) pipes of SDR 11 pipes and SDR 11 fittings applicable for pipes of less than 2'' size and SDR 13.5 pipes and Sch. 40 fittings for sizes of 2.5'' to 4''. Job includes all other accessories including connections, joining ,butt welding etc , complete as per drawings and mfr's recommendations or as directed at site. size -15MM 159 CPVC PIPING(IS 15778)-20 MM 31103- Meters 249 995424 Yes supply and laying chlorinated polyvinyl chloride (CPVC) pipes of SDR 11 pipes and SDR 11 fittings applicable for pipes of less than 2'' size and SDR 13.5 pipes and Sch. 40 fittings for sizes of 2.5'' to 4''. Job includes all other accessories including connections, joining ,butt welding etc , complete as per drawings and mfr's recommendations or as directed at site. size -20MM 160 CPVC PIPING(IS 15778)-25 MM 31103- Meters 303 995424 Yes supply and laying chlorinated polyvinyl chloride (CPVC) pipes of SDR 11 pipes and SDR 11 fittings applicable for pipes of less than 2'' size and SDR 13.5 pipes and Sch. 40 fittings for sizes of 2.5'' to 4''. Job includes all other accessories including connections, joining ,butt welding etc , complete as per drawings and mfr's recommendations or as directed at site. size -25MM 161 CPVC PIPING(IS 15778)-32 MM 31103- Meters 399 995424 Yes supply and laying chlorinated polyvinyl chloride (CPVC) pipes of SDR 11 pipes and SDR 11 fittings applicable for pipes of less than 2'' size and SDR 13.5 pipes and Sch. 40 fittings for sizes of 2.5'' to 4''. Job includes all other accessories including connections, joining ,butt welding etc , complete as per drawings and mfr's recommendations or as directed at site. size -32MM 162 CPVC PIPING( IS 15778)-40 MM 31103- Meters 540 995424 Yes supply and laying chlorinated polyvinyl chloride (CPVC) pipes of SDR 11 pipes and SDR 11 fittings applicable for pipes of less than 2'' size and SDR 13.5 pipes and Sch. 40 fittings for sizes of 2.5'' to 4''. Job includes all other accessories including connections, joining ,butt welding etc , complete as per drawings and mfr's recommendations or as directed at site. size -40MM 163 CPVC PIPING( IS 15778) - 50 31103- Meters 761 995424 Yes MM supply and laying chlorinated polyvinyl chloride (CPVC) pipes of SDR 11 pipes and SDR 11 fittings applicable for pipes of less than 2'' size and SDR 13.5 pipes and Sch. 40 fittings for sizes of 2.5'' to 4''. Job includes all other accessories including connections, joining ,butt welding etc , complete as per drawings and mfr's recommendations or as directed at site. size -50MM 164 40MM DIA GATE VALVE 31103- Each 2354 995462 Yes Providing & fixing brass full way gate valve ISI marked & of Leader/GG make or approved equivalent as directed by Enginner In Charge. Size 40 mm diameter 165 32MMDIA GATE VALVE 31103- Each 1654 995462 Yes Providing & fixing brass full way gate valve ISI marked & of Leader/GG make or approved equivalent as directed by Enginner In Charge. size 32mm dia 166 25MM DIA GATE VALVE 31103- Each 1187 995462 Yes Providing & fixing brass full way gate valve ISI marked & of Leader/GG make or approved equivalent as directed by Enginner In Charge.size 25mm dia 167 15MM DIA GATE VALVE 31103- Each 256 995462 Yes Providing & fixing brass full way gate valve ISI marked & of Leader/GG make or approved equivalent as directed by Enginner In Chargesize 15mm dia 168 WATER TANK-1000 LTRS 31103- Each 9685 995468 Yes WATER TANK Supplying and installation of HDPE water tanks of approved make of 1000 litre capacity including 300 mm high brick masonry pedestal of 230mm thick in CM 1:5, providing 75mm thick RCC 1:2:4 slab with reinforcement 8mm tor @150mm c/c, lifting the tank , making all necessary GI connections to inlet, outlet, and overflow nozzles and cleaning the tank before commissioning. (Refer attached Drawing) 169 WATER TANK-5000 LTRS 31103- Each 50154 995468 Yes WATER TANK Supplying and installation of HDPE water tanksof approved make of 5000 litre capacity including 300 mm high brick masonry pedestal of 230mm thick in CM 1:5, providing 75mm thick RCC 1:2:4 slab with reinforcement 8mm tor @150mm c/c, lifting the tank , making all necessary GI connections to inlet, outlet, and overflow nozzles and cleaning the tank before commissioning. (Refer attached Drawing) 170 160MMDIA-PVC SWR PIPES 31103- Meters 740 995424 Yes PVC SOIL / WASTE /RAIN WATER PIPE: Supplying and laying the PVC pipe conforming to IS 13592:92 including plain or door type bends, shoes, offsets, clamps junctions, tees, etc, complete. Also including cutting, bending & supply and laying of 17 SWG annealed binding wire inside the Pipe for pulling cables in future. 171 110 MM DIA- PVC SWR PIPES 31103- Meters 426 995424 Yes PVC SOIL / WASTE /RAIN WATER PIPE: Supplying and laying the PVC pipe conforming to IS 13592:92 including plain or door type bends, shoes, offsets, clamps junctions, tees, etc, complete. Also including cutting, bending & supply and laying of 17 SWG annealed binding wire inside the Pipe for pulling cables in future.110 MM DIA PVC PIPE 172 80 MM DIA PVC SWR PIPES 31103- Meters 327 995424 Yes PVC SOIL / WASTE /RAIN WATER PIPE: Supplying and laying the PVC pipe conforming to IS 13592:92 including plain or door type bends, shoes, offsets, clamps junctions, tees, etc, complete. Also including cutting, bending & supply and laying of 17 SWG annealed binding wire inside the Pipe for pulling cables in future. size 80mm diameter 173 NAHANI TRAP 31103- Each 486 995462 Yes NAHANI (FLOOR) TRAP Providing and fixing PVC floor trap of self cleansing design conforming to IS specs with 100mm inlet, 75mm outlet and 150mm CP hinged grating of 6mm thick with rim. Rate shall include making all necessary leak proof connections etc . 174 GULLY TRAP WITH CHAMBER 31103- Each 2169 995462 Yes GULLY TRAP WITH CHAMBER Providing and fixing square mouth gully trap including constructing 300 X 300 MM internal size brick masonary chamber with 230mm thick brick masonary in 1:5 cement mortar, excavation, 75mm thick PCC 1:4:8 bed, plastering with neat cement finish, Medium duty CI cover with frame etc. complete. 175 25MM DIA NON RETURN 31103- Each 438 995462 Yes VALVE: Providing and fixing brass Non-Return Valve GG/LEADER make ISI marked or approved equivalant 176 15MM DIA NON RETURN 31103- Each 380 995462 Yes VALVE Providing and fixing brass Non-Return Valve GG/LEADER make ISI marked or approved equivalent - 15MM DIA NON RETURN VALVE 177 FLOAT VALVE 31103- Each 679.7 995462 Yes FLOAT VALVE Providing and fixing Float Valve (Ball cock) of polypropylene or synthetic metal (Symet) float and rod of approved make of 25mm dia. nominal bore. 178 600X600X600MM INSPN. 31103- Each 7605 995456 Yes CHAMBERS Providing and constructing inspection chambers of size 600X600X600 mm with 230mm thick brick masonary in 1:5 cement mortar, excavation, 75mm thick PCC 1:4:8 bed, plastering with neat cement finish etc. complete. incl. CI ( ISI make) Chamber cover CI covers for Chambers / Inspection chambers etc with frame of 600X600 mm nominal size with seal, all materials and labour complete.& angle Frames to support etc complete(Refer attached Drawing) 179 450X450X600MM INSPN. 31103- Each 4672 995456 Yes CHAMBERS Providing and constructing inspection chambers with 230mm thick brick masonary in 1:5 cement mortar, excavation, 75mm thick PCC 1:4:8 bed, plastering with neat cement finish etc. complete. incl. CI ( ISI make) Chamber cover CI covers for Chambers / Inspection chambers etc with frame of 600X600 mm nominal size with seal, all materials and labour complete.& angle Frames to support etc complete - 450X450X600MM INSPN. CHAMBERS(Refer attached Drawing) 180 SEWER TRAP CHAMBER 31103- Each 2560 995462 Yes SEWER TRAP CHAMBER Providing and constructing sewer trap with conical frame work in 9" thick BM chamber with CM1:4 conical chamber of size 3.5"dia at top and 4.5" dia at bottom and depth as per required slope including cement plater inside and outsite with CM1:4 including necessary foundation and excavation. The job includes providing CI cover of ISI make, etc., complete. The job is to be carried out as per local municipal rules and regulations by licensed plumber. 181 SEPTIC TANK (25 PERSON) 31103- Each 43724.15 995434 Yes SEPTIC TANK Providing & constructing septic tank of size 1200x2000x1800mm depth with excavation ,PCC1:4:8 100mm thick bed , 345/230mm thick brick masonary wall in CM 1:5 ,RCC1:2:4 100mm thick slab with 8mm tor steel @150c/c both way , 115mm thick baffle wall with RCC beam at bottom ,12mm thick smooth cement plaster with water proofing compound inside and exposed outside portion, providing 600mmx600mm size medium duty CI cover, providing 75mm dia PVC vent pipe etc. Complete.(Refer attached Drawing) 182 SEPTIC TANK (75 PERSON) 31103- Each 130160 995434 Yes SEPTIC TANK Prpoviding & constructing septic tank of required capacity as per design complete with excavation ,PCC1:4:8 100mm thick bed , 345/230mm thick brick masonary wall in CM 1:5 ,RCC1:2:4 100mm thick slab with 8mm tor steel @150c/c both way , 115mm thick baffle wall with RCC beam at bottom ,12mm thick smooth cement plaster with water proofing compound inside and exposed outside portion, providing 600mmx600mm size medium duty CI cover, providing 75mm dia PVC vent pipe etc. Complete.--SEPTIC TANK (75 PERSON)(Refer attached Drawing) 183 SOAKPIT 2.5 MDIAX3.0 M. 31103- Each 24911 995456 Yes DEPTH SOAK PIT Providing and constructing soak pit of 2.5m dia X 3m depth (internal) in brick masonry of class 75 design. Internal size of shaft shall be minimum clear 1m with minimum 230thk. walls in cement mortar 1:6 at top 500mm in height and in bottom 230mm wall in height with 450mmx450mm dry brick honey comb shaft and surrounded by broken brick bats. The outer walls of the shaft should be 230 mm followed by 150 mm thick layer of 50-80 mm nominal size brick aggregates thereafter followed by 150 mm thick layer.( as per IS 2470 part 1 and part 2 as the case may be) 184 PT.WIRING- SWITCH LT/FAN 31103- Each 847 995461 Yes Providing and laying point wiring in concealed conduits for the following points using specified 1100V grade PVC insulated, FRLS multistranded 3 x 1.5 sqmm copper conductor wires. Rate to include supplying, laying and securing in position in roof slabs and brick walls or concrete columns 25 mm dia rigid PVC conduits (Conforming to IS 9537:Part 3: 1983) of approved make with necessary accessories and junction boxes/pull boxes. Providing and fixing in the brick walls flush type metal switch boxes of approved make shade and sufficient size to accommodate all 6A Modular switches / 3 pin socket, screws, holders. ceiling roses and the fan regulator wherever required. Rate to include wall chasing and rough plastering. Providing and fixing single pole 5A modular plate switches of approved MK or ANCHOR ROMA/HAVELLS /FINOLEX/CRABTREE/SSK make and of approved colour . One switch shall be provided for each light and fan point. Rate also to include providing main circuit wiring from DB to switch boards with 2 runs of 2.5 sqmm copper wire and 1 run of 1.5 sqmm through PVC conduit. also All wires shall be conforming to IS 694:1990. 185 6A SOCKET SWITCH 31103- Each 916 995461 Yes Providing and laying point wiring in concealed conduits for the following points using specified 1100V grade PVC insulated, FRLS multistranded 3 x 1.5 sqmm copper conductor wires. Rate to include supplying, laying and securing in position in roof slabs and brick walls or concrete columns 25 mm dia rigid PVC conduits (Conforming to IS 9537:Part 3: 1983) of approved make with necessary accessories and junction boxes/pull boxes. Providing and fixing in the brick walls flush type metal switch boxes of approved make shade and sufficient size to accommodate all 6A Modular switches / 3 pin socket, screws, holders. ceiling roses and the fan regulator wherever required. Rate to include wall chasing and rough plastering. Providing and fixing single pole 6 A socket modular plate switches of approved MK or ANCHOR ROMA/HAVELLS /FINOLEX/CRABTREE/SSK make and of approved colour . One switch shall be provided for each light and fan point. Rate also to include providing main circuit wiring from DB to switch boards with 2 runs of 2.5 sqmm copper wire and 1 run of 1.5 sqmm through PVC conduit. also All wires shall be conforming to IS 694:1990. but for 6A socket controlled by one 6A switch on the same lighting board 186 6A SOCKET SWITCH 31103- Each 1149 995461 Yes INDEPENENTLY Providing and laying point wiring in concealed conduits for the following points using specified 1100V grade PVC insulated, FRLS multistranded 3 x 1.5 sqmm copper conductor wires. Rate to include supplying, laying and securing in position in roof slabs and brick walls or concrete columns 25 mm dia rigid PVC conduits (Conforming to IS 9537:Part 3: 1983) of approved make with necessary accessories and junction boxes/pull boxes.Providing and fixing in the brick walls flush type metal switch boxes of approved make shade and sufficient size to accommodate all 6A Modular switches / 3 pin socket, screws, holders. ceiling roses and the fan regulator wherever required. Rate to include wall chasing and rough plastering.Providing and fixing of approved MK or ANCHOR ROMA/HAVELLS /FINOLEX/CRABTREE/SSK make and of approved colour . One switch shall be provided for each light and fan point.Rate also to include providing main circuit wiring from DB to switch boards with 2 runs of 2.5 sqmm copper wire and 1 run of 1.5 sqmm through PVC conduit. also All wires shall be conforming to IS 694:1990. but for 6A socket controlled by one 6A switch on the same lighting board but for 6A socket controlled by one 6A switch independently mounted including providing wiring with 3 runs of 1.5 sqmm PVC insulated copper wire through PVC conduit 187 6/16A SOCKET SWITCH 31103- Each 1345 995461 Yes Providing and laying point wiring in concealed conduits for the following points using specified 1100V grade PVC insulated, FRLS multistranded 3 x 1.5 sqmm copper conductor wires. Rate to include supplying, laying and securing in position in roof slabs and brick walls or concrete columns 25 mm dia rigid PVC conduits (Conforming to IS 9537:Part 3: 1983) of approved make with necessary accessories and junction boxes/pull boxes.Providing and fixing in the brick walls flush type metal switch boxes of approved make shade and sufficient size to accommodate all 6A Modular switches / 3 pin socket, screws, holders. ceiling roses and the fan regulator wherever required. Rate to include wall chasing and rough plastering.Providing and fixing approved MK or ANCHOR ROMA/HAVELLS /FINOLEX/CRABTREE/SSK make and of approved colour . One switch shall be provided for each light and fan point.Rate also to include providing main circuit wiring from DB to switch boards with 2 runs of 2.5 sqmm copper wire and 1 run of 1.5 sqmm through PVC conduit. also All wires shall be conforming to IS 694:1990. but for 6A socket controlled by one 6A switch on the same lighting board for 6/16A socket controlled by 16A switch independently mounted including providing wiring with 2 runs of 2.5 sqmm and 1 run of 1.5 sqmm PVC insulated copper wire through PVC conduit 188 AC POINT 31103- Each 2292 995461 Yes Providing and laying point wiring in concealed conduits for the following points using specified 1100V grade PVC insulated, FRLS multistranded 3 x 1.5 sqmm copper conductor wires. Rate to include supplying, laying and securing in position in roof slabs and brick walls or concrete columns 25 mm dia rigid PVC conduits (Conforming to IS 9537:Part 3: 1983) of approved make with necessary accessories and junction boxes/pull boxes.Providing and fixing in the brick walls flush type metal switch boxes of approved make shade and sufficient size to accommodate all 6A Modular switches / 3 pin socket, screws, holders. ceiling roses and the fan regulator wherever required. Rate to include wall chasing and rough plastering.Providing and fixing approved MK or ANCHOR ROMA/HAVELLS /FINOLEX/CRABTREE/SSK make and of approved colour . One switch shall be provided for each light and fan point.Rate also to include providing main circuit wiring from DB to switch boards with 2 runs of 2.5 sqmm copper wire and 1 run of 1.5 sqmm through PVC conduit. also All wires shall be conforming to IS 694:1990. for 6A socket controlled by one 6A switch on the same lighting board Same as above but for for AC point with 2 runs of 4 sqmm (P&N)and 1 run of 2.5 sqmm (earthing) PVC insulated , FRLS multistrand copper cable in 25 mm dia PVC conduict from MCBDB to 20 A powersocket. The conduit shall be partly/fully concealed in all types of wall, ceiling etc complete with all accessories, wiring, termination, connected civil works, rough plastering etc including supply and fixing of 20A industrial socket controlled by 20A SPMCB of MDS/HAVELS make. 189 4X10+1X6 SQMM 31103- Meters 543 995461 Yes MULTIST.FRLS CU Supply, laying , and commissioning of wiring using following sizes of PVC insulated , FRLS, unsheathed, multistrand copper wire drawn in PVC conduits. Rate to include supply of 16 GI fish wire, conduits & accessories, wiring, terminations etc complete. All wires shall be conforming to IS 694:1990 and PVC conduits to conforming to IS 9537:Part 3: 1983 --Supply, laying, and commissioning of wiring using 4 runs of 10 sqmm and 1 run of 6 sqmm PVC insulated , FRLS, unsheathed, multistranded copper wires in 40 mm dia medium duty PVC conduit (Conforming to IS 9537:Part 3:1983) from panel to Distribution boards. Rate to include supply of 16 GI fish wire, conduits & accessories, wiring, terminations etc complete. 190 4X6+1X4 SQMM MULTIST. 31103- Meters 373 995461 Yes FRLS CU Supply, laying , and commissioning of wiring using following sizes of PVC insulated , FRLS, unsheathed, multistrand copper wire drawn in PVC conduits. Rate to include supply of 16 GI fish wire, conduits & accessories, wiring, terminations etc complete. All wires shall be conforming to IS 694:1990 and PVC conduits to conforming to IS 9537:Part 3: 1983 -- supply, laying, and commissioning of wiring using 4 runs of 6 sqmm and 1 run of 4 sqmm FRLS multistranded copper wire in 32 mm dia PVC conduit from panel to Distribution boards. 191 FRLS MULTISTR. 1.5 SQMM 31103- Meters 32 995461 Yes COPPER Supply, laying , and commissioning of wiring using following sizes of PVC insulated , FRLS, unsheathed, multistrand copper wire drawn in PVC conduits. Rate to include supply of 16 GI fish wire, conduits & accessories, wiring, terminations etc complete. All wires shall be conforming to IS 694:1990 and PVC conduits to conforming to IS 9537:Part 3: 1983 -- Supply and laying through conduit FRLS multistranded PVC insulated (1100V) copper wire conforming to IS 694:1990 and of size 1.5 sqmm including termination etc. all complete. PVC Conduits to be paid for separately as per relevant items. 192 FRLS MULTISTR. 2.5 SQMM 31103- Meters 38 995461 Yes COPPER Supply, laying , and commissioning of wiring using following sizes of PVC insulated , FRLS, unsheathed, multistrand copper wire drawn in PVC conduits. Rate to include supply of 16 GI fish wire, conduits & accessories, wiring, terminations etc complete. All wires shall be conforming to IS 694:1990 and PVC conduits to conforming to IS 9537:Part 3: 1983 -- Supply and laying through conduit FRLS multistranded PVC insulated (1100V) copper wire conforming to IS 694:1990 and of size 2.5 sqmm including termination etc. all complete. PVC Conduits to be paid for separately as per relevant items.--size 2.5 sqmm 193 FRLS MULTISTR. 4.0 SQMM 31103- Meters 49 995461 Yes COPPER Supply, laying , and commissioning of wiring using following sizes of PVC insulated , FRLS, unsheathed, multistrand copper wire drawn in PVC conduits. Rate to include supply of 16 GI fish wire, conduits & accessories, wiring, terminations etc complete. All wires shall be conforming to IS 694:1990 and PVC conduits to conforming to IS 9537:Part 3: 1983 -- Supply and laying through conduit FRLS multistranded PVC insulated (1100V) copper wire conforming to IS 694:1990 and of size 4.0 sqmm including termination etc. all complete. PVC Conduits to be paid for separately as per relevant items but size 4.0 sqmm 194 FRLS MULTISTR. 6.0 SQMM 31103- Meters 64 995461 Yes COPPER Supply, laying , and commissioning of wiring using following sizes of PVC insulated , FRLS, unsheathed, multistrand copper wire drawn in PVC conduits. Rate to include supply of 16 GI fish wire, conduits & accessories, wiring, terminations etc complete. All wires shall be conforming to IS 694:1990 and PVC conduits to conforming to IS 9537:Part 3: 1983 -- Supply and laying through conduit FRLS multistranded PVC insulated (1100V) copper wire conforming to IS 694:1990 and of size 6.0 sqmm including termination etc. all complete. PVC Conduits to be paid for separately as per relevant items size 6.0 sqmm

PVC CONDUIT MED. IS:9537- — Supply and laying rigid non-flame propagating medium duty PVC conduit 25 mm dia. conforming IS 9537(Part III) including all bends, clamps, joineries, fixing on the wall etc. all complete 196 PVC CONDUIT MED. IS:9537-32 31103- Meters 112 995461 Yes MM Supply and laying rigid non-flame propagating medium duty PVC conduit conforming IS 9537(Part III) including all bends, clamps, joineries, fixing on the wall etc. all complete 32 mm dia 197 PVC CONDUIT MED. IS:9537-40 31103- Meters 126 995461 Yes MM Supply and laying rigid non-flame propagating medium duty PVC conduit conforming IS 9537(Part III) including all bends, clamps, joineries, fixing on the wall etc. all complete 40 mm dia 198 CEILING FANS 1400 MM 31103- Each 1816 995463 Yes SWEEP CEILING FANS Supplying and fixing of the ceiling fans of approved make with detail as below : Sweep :1400 mm, Colour :White, Bearing type :Double ball bearing, Down Rod : Clear 300 mm long, Regulator : Electronic type ANCHOR/MK make, Accessories : Screws, wall nuts etc. 199 EXHAUST FANS 305MM DIA 31103- Each 2217 995461 Yes Supply, fixing and commissioning of Exhaust fans of following dia including bird louvers, frame works and other civil works like chipping and making the surface good etc EXHAUST FANS 305MM DIA 200 EXHAUST FANS 230MM DIA 31103- Each 2043 995463 Yes Supply, fixing and commissioning of Exhaust fans of following dia including bird louvers, frame works and other civil works like chipping and making the surface good etc EXHAUST FANS 230MM DIA 201 1X36W TUBE LIGHT FITTING 31103- Each 1422.9 995461 Yes Supply, fixing and commissioning of box type light fitting Philips make cat no. TCS 019 / bajaj E- lux snap fit of HPF (High Power Factor) with electronic ballast 1 x 36 W tube light fitting with lamp or equivalent of Crompton make Cat. DJB 14. Rate to include all accessories, interconnection of wires from ceiling rose to the fittings and fluorescent tube lamps , copper ballast etc. 202 18W CFL LAMP 31103- Each 323 995461 Yes supply and fixing retrofit CFLs 18 W with linear lamps of Approved MAKE WITH FIXTURE/HOLDER 203 13 W CFL LAMP 31103- Each 304 995461 Yes supply and fixing retrofit CFLs 18 W with linear lamps of Approved MAKE WITH FIXTURE/HOLDER-- 13 W

2X36W TUBE LIGHT FITTING — 2 x 36 W tube light fitting including lamp Phillps cat no TCS 306 ( 2X 36 w) HPF or equivalent 205 RECESSMOUNT OPTIC 31103- Each 4185 995461 Yes FITTING-2X36 supply and fixing 2 x 36 W indoor decorative recess mounted tube light fitting including lamp Philips cat no TBS 869 (High Power Factor) or equivalent of Crompton make Cat. CBSW 1124 HSB. 206 RECESSMOUNTMIRROR 31103- Each 3517 995461 Yes OPTIC-4 X18W supply and fixing 4 x 18 W indoor decorative mirror optics luminaire suitable for recessed mounting including 4 nos. TL D lamps Philips cat no TBS 088 (High Power Factor) or equivalent of Crompton make Cat. CRFN 42 HSB. 207 TEL. SOCKET POINT 2 PAIR 31103- Each 692 995468 Yes TELEPHONE SOCKET POINT Supply and laying 4 pairs of 0.5 mm dia screened and shilded telephone wire in 20 mm dia PVC conduit partly/fully concealed in types of walls , floor etc complete with all accessories , wiring terminations, connected civil works, rough plastering etc including supply of 16 GI fish wire conduit & accessories etc. 208 TEL. TAG BLOCK 5 PAIRS 31103- Each 921 998736 Yes Supply, fixing and commissioning of ffive pairs of telephone tag block of Krone type enclosed in suitable MS box. Rate shall include all accessories, connected civil works for fixing the same as per specifications. 209 TEL. SOCKET 31103- Each 231 998734 Yes Supply and installation of modular type telephone socket MK make in a suitable size box concealed to wall including all civil works 210 METER BOARD 31103- Each 9207.6 995461 Yes Supply and fixing of wall mounting type meter board made out of 16 SWG CRCA sheet steel and single iron with 3 nos 200A Porcelein Havells make Fuse cutouts N.L, 1 no earth link , 1 no neutral link complete with adequate size of copper wire interconnections, powder coating etc. complete. Approx.size of the board 450mmx450mm(Refer attached Drawing) 211 PANEL BRD- UP TO 50 KVA 31103- Each 90852 995461 Yes Supply,Delivery and installation of Wall mounted Panel Board as per the enclosed Single Line Diagram for Retail Outlets. Party has to supply the panel after approval of the G.A. by HPCL. The panel is to be provided with the following and made out of 16 SWG CRCA sheet steel with gland plate made of 14 SWG CRCA with 100 A TPN copper bus bars, interconnections, earthing, powder coating etc complete as per the approved make of materials:-In comer : 1 no 125 A TPN MCCB for EB & 1 no 63 A 4 pole'C' MCB for DG. , 1 no 63A 4 pole on load change over switch 1 no. voltmeter with selector switch, 1 no. ammeter with selector switch and with CT (125/5A) 3 nos, 2 set of phase indicating lamp(RYB), Control Fuse with base.Outgoings: 4 nos. 32 A TP'C' MCB, 1 no. 32 A TP 'D' MCB, 9 nos. 20 A DP'C' MCB, 1 no. 40 A DP ELCB 30 ma, 15 nos. 10 A SP'B' MCB, 2 nos. 10 A DP'B' MCB ,7 nos. 6 A SP'B'MCB, 1 no. 40 A FP MCB with KMS meter.Capacitor: APFCR ( Automatic power factor control Relay ) 5KVA 1 no, 4 KVA 1 no. 3 KVA 2 nos. with capacity duty contactor. Connections for the outgoings MCBs from the bus bar to be distributed from the R, Y & B phases as indicated in the SLD.(Refer attached Drg.)Rate to include supply of Copper bus Bar of 100 amps rating, End termination blocks of sufficient quantity for the above cable terminations but not less than 32A connector - 4 nos. 16 A connectors - 50 nos.Input side cable chamber to have 4 nos. of cable entry holes with dummy caps, on the top and bottom respectively (total 8 holes), of 28 mm dia for installation of NFLP glands Output side cable chamber to have 25 nos. of cable exit holes with dummy caps, on the top and bottom respectively (total 50 holes), of 19mm dia for installation of NFLP glands. The panel should have provision for earthing connection. The fixing lugs of length 6", bent in the shape of "L" for mounting the panel on the wall etc. complete. Rate includes supply of necessary wiring accessories, busbar connectors etc complete. Panel size to be of minimum 1700mm(L) x 2000 mm (H) X250 mm (D) .(Refer attached GA Drg) Note : TPI of panels at factory as per the approved QAP of HPCL by TPI vendors ( HPCL shall specify third party inspection(TPI) agencies to the vendor) to be done as per the requirement of the HPCL .Rate of MV panel includes the Cost of TPI and Transportation to the site and inclusive of all taxes 212 PANEL BRD- UP TO 25 KVA 31103- Each 77830 995461 Yes Supply,Delivery and Installation of Wall Mounted Panel Board as per the enclosed Single Line Diagram for Retail Outlets( Refer Attached Drg). Party has to supply the panel after approval of the G.A. Supply,Delivery and Installation of Wall Mounted Panel Board as per the enclosed Single Line Diagram for Retail Outlets( Refer Attached Drg). Party has to supply the panel after approval of the G.A. by HPCL. The panel is to be provided with the following and made out of 16 SWG CRCA sheet steel with gland plate made of 14 SWG CRCA with 100 A TPN copper bus bars, interconnections, earthing, powder coating etc complete as per the approved make of materials:Incomer : 2 no. 63A FPC MCB for DG and EB, 1 no 63A 4 pole on load change over switch 1 no. voltmeter with selector switch, 1 no. ammeter with selector switch and with CT (60/5A) 3 nos, 2 set of phase indicating lamp(RYB), Control Fuse with base.Outgoings: 4 nos. 32 A TPC MCB, 1 no. 32 A TP D MCB, 9 nos. 20 A DPC MCB, 1 no. 40 A DP ELCB 30 mA, 15 nos. 10 A SPB MCB, 2 nos. 10 A DPB MCB ,7 nos. 6 A SPBMCB, 1 no. 40 A FP MCB with KMS meter. Capacitor: 10 KVAR. Connections for the outgoings MCBs from the bus bar to be distributed from the R, Y & B phases as indicated in the SLD. Rate to include supply of Copper bus Bar of 100 amps rating, End termination blocks of sufficient quantity for the above cable terminations but not less than 32A connector - 4 nos, 16 A connectors - 50 nos. Input side cable chamber to have 4 nos. of cable entry holes with dummy caps, on the top and bottom respectively (total 8 holes), of 28 mm dia for installation of NFLP glands. Output side cable chamber to have 25 nos. of cable exit holes with dummy caps, on the top and bottom respectively (total 50 holes), of 19mm dia for installation of NFLP glands. The panel should have provision for earthing connection. The fixing lugs of length 6, bent in the shape of L for mounting the panel on the wall etc. complete. Rate includes supply of necessary wiring accessories, busbar connectors etc complete. Panel size to be of minimum 1700mm(L) x 2000 mm (H) X250 mm (D) ( Refer attached GA Drg) Note : TPI of panels at factory as per the approved QAP of HPCL by TPI vendors ( HPCL shall specify third party inspection(TPI) agencies to the vendor) to be done as per the requirement of the HPCL .Rate of MV panel includes the Cost of TPI and Transportation to the site and inclusive all taxes. 213 63A TPN MCB DB 31103- Each 5956 995461 Yes Supply, installation and commissioning of 63A TPN MCB DB Incomer : 1 no 63 A , 4 Pole MCB Outgoings : 18 nos, 10A/16A/20A SP MCBs 214 32A TPN MCB DB 31103- Each 4752 995461 Yes Supply, installation and commissioning of 32A TPN MCB DB Incomer : 1 no 32 A , 4 Pole MCB Outgoings : 12 nos, 10A/16A/20A SP MCBs 215 3.5CX 120 SQMM AL CABLE 31103- Meters 512 995423 Yes Supply and laying following size PVC insulated, sheathed, armoured cable of approved make conforming to IS 1554:Part 1:1988 - 3.5CX 120 SQMM AL CABLE 216 3.5 C X 95 SQMM AL CABLE 31103- Meters 411 995423 Yes Supply and laying following size PVC insulated, sheathed, armoured cable of approved make conforming to IS 1554:Part 1:1988 -3.5 C X 95 SQMM AL CABLE 217 3.5CX 70 SQMM AL CABLE 31103- Meters 342 995423 Yes Supply and laying following size PVC insulated, sheathed, armoured cable of approved make conforming to IS 1554:Part 1:1988 3.5CX 70 SQMM AL CABLE 218 3.5CX 50 SQMM AL CABLE 31103- Meters 253 995423 Yes Supply and laying following size PVC insulated, sheathed, armoured cable of approved make conforming to IS 1554:Part 1:1988 3.5CX 50 SQMM AL CABLE 219 3.5CX35SQMM AL CABLE 31103- Meters 253 995423 Yes Supply and laying following size PVC insulated, sheathed, armoured cable of approved make conforming to IS 1554:Part 1:1988 3.5CX35SQMM AL CABLE 220 4CX16SQMM AL CABLE 31103- Meters 212 995423 Yes Supply of 4CoreX35 SQMM armored aluminium cable, PVC insulated, sheathed, of approved make conforming to IS 1554:Part 1:1988 and IS 7098 PART-1. 221 4CX6SQMM AL CABLE 31103- Meters 94 995423 Yes Supply and laying following size PVC insulated, sheathed, armoured cable of approved make conforming to IS 1554:Part 1:1988 4CX6SQMM AL CABLE 222 4CX2.5SQMM COPPER CABLE 31103- Meters 107 995423 Yes Supply and laying following size PVC insulated, sheathed, armoured cable of approved make conforming to IS 1554:Part 1:1988 4CX2.5SQMM COPPER CABLE 223 3CX2.5SQMM COPPER CABLE 31103- Meters 121 995423 Yes SUPPLY AND LAYING OF 3CX6SQMM SUBMERSIBLE PUMP CABLE 224 3.5CX120SQMM AL CABLE 31103- Each 417 995423 Yes END TER END TERMINATION End termination of following cable with double compression NFLP gland and crimping sockets 3.5CX120SQMM AL CABLE END TER 225 3.5CX95 SQMM AL CABLE END 31103- Each 403 995423 Yes TER END TERMINATION End termination of following cable with double compression NFLP gland and crimping sockets 3.5CX95 SQMM AL CABLE END TER 226 3.5CX70 SQMM AL CABLE END 31103- Each 314 995423 Yes TER END TERMINATION End termination of following cable with double compression NFLP gland and crimping sockets 3.5CX70 SQMM AL CABLE END TER 227 3.5CX50 SQMM AL CABLE END 31103- Each 280 995423 Yes TER END TERMINATION End termination of following cable with double compression NFLP gland and crimping sockets 3.5 core X 50 sqmm 228 3.5CX35SQMM END 31103- Each 254 995423 Yes TERMINATION END TERMINATION End termination of following cable with double compression NFLP gland and crimping sockets 3.5 core X 35 sqmm 229 4CX16SQMM END 31103- Each 176 995423 Yes TERMINATION END TERMINATION End termination of following cable with double compression NFLP gland and crimping sockets 4 core X 16 sqmm 230 4 CORE X 6 SQMM END TERM. 31103- Each 149 995423 Yes END TERMINATION End termination of following cable with double compression NFLP gland and crimping sockets 4 core X 6 sqmm 231 4CX2.5 SQMM END 31103- Each 105 995423 Yes TERMINATION END TERMINATION End termination of following cable with double compression NFLP gland and crimping sockets 4CX2.5 SQMM END TERMINATION 232 3CX2.5SQMM END TER. DOB. 31103- Each 123 995423 Yes COMP. END TERMINATION End termination of following cable with double compression NFLP gland and crimping sockets 3CX2.5SQMM END TERMINATION 233 4CX2.5 SQMM END TERM( 31103- Each 311 995423 Yes FLP) END TERMINATION End termination of following cable with double compression FLP gland and crimping sockets 4CX2.5 SQMM END TERMINATION 234 3CX2.5SQ END 31103- Each 311 995423 Yes TER.DOBCOMP( FLP) END TERMINATION End termination of following cable with double compression FLP gland and crimping sockets 3CX2.5SQMM END TERMINATION 235 CABLE TRENCH EXCAVATION 31103- Meters 224 995423 Yes Excavation in any type of soil including WBM/asphalt up to 600mm depth and 300mm wide including supply and laying 150mm thick sand on top and bottom of cable, supply and laying bricks laid flat on top, back filling trench etc. complete. (Refer attached Drawing) 236 JUNCTION BOX-FLP 31103- Each 1294 995461 Yes Supplying and fixing flame proof and weather proof junction box of approved make out door junction box of IP 54 category of protection with rubber gasket and having locking arrangement including all required connectors, 237 JUNCTION BOX-NFLP 31103- Each 1527 995461 Yes Supplying and fixing NFLP Junction box 150mm x150mm x125mm weather proof out door junction box fabricated out of 18 SWG CRCA sheet of protection with rubber gasket and having locking arrangement including required connector 238 OCTAGONALGALVAPOLE6.0 31103- Each 15756 995461 Yes MHT-SIN Supply and installation of BAJAJ make Hot dip galavanised iron pole of Height 6.0 meter having wall thickness 3 mm. C/s A/F - top = 70mm, bottom =130 mm, base plate 220x220x12 mm, 500 mm long weatherproof reinforced door opening with junction box mounting arrangement but exclusive of junction box, single arm bracket 1 m, 20mm dia. threaded made to J shape and having 600 mm total length steel grade EN8 foundation bolts - 4 nos with nuts, templates and all complete as per approved drawing. Approved Equivalent Make - PHILIPS. Foundation RCC 1:1.5:3 shall be of size 550x550mm and depth 1200 mm with 8 nos. 12mm dia. tor bars as main bars and 8mm dia. tor bars stirrups @ 190 mm c/c as per approved drawing. This reinforcement shall conform to IS:1786 latest edition. The foundation shall extend above sorrounding ground/driveway level for 200 mm and have slant 63mm dia. PVC sleeve cast insitu foundation for cable entry as per the drawing. Rates to include excavation, PCC, RCC and reinforcement, etc. complete(Refer attached Drawing). 239 OCTAGONALGALV POLE6.0 M 31103- Each 16239 995461 Yes HT-DOU Supply and installation of BAJAJ make Hot dip galavanised iron pole of Height 6.0 meter having wall thickness 3 mm. C/s A/F - top = 70mm, bottom =130 mm, base plate 220x220x12 mm, 500 mm long weatherproof reinforced door opening with junction box mounting arrangement but exclusive of junction box, double arm brackets 1 m each, 20mm dia. threaded made to J shape and having 600 mm total length steel grade EN8 foundation bolts - 4 nos with nuts, templates and all complete as per approved drawing. Approved Equivalent Make - PHILIPS. Foundation RCC 1:1.5:3 shall be of size 550x550mm and depth 1200 mm with 8 nos. 12mm dia. tor bars as main bars and 8mm dia. tor bars stirrups @ 190 mm c/c as per approved drawing. This reinforcement shall conform to IS:1786 latest edition. The foundation shall extend above sorrounding ground/driveway level for 200 mm and have slant 63mm dia. PVC sleeve cast insitu foundation for cable entry as per the drawing. Rates to include excavation, PCC, RCC and reinforcement, etc. complete(Refer attached Drawing) 240 GRP-SINGLE ARM POLE 6.0 M. 31103- Each 17074 995461 Yes HT Supply and installation of BAJAJ make Glass reinforced plastic conical UV protected Single arm pole- Flange type of 1000mm length and Height 6.0 meter with door opening with junction box mounting arrangement but exclusive of junction box, 20mm dia. threaded made to J shape and having 600 mm total length steel grade EN8 foundation bolts with nuts, templates and all complete as per approved drawing. Approved Equivalent Make - PHILIPSFoundation RCC 1:1.5:3 shall be of size 550x550mm and depth 1200 mm with 8 nos. 12mm dia. tor bars as main bars and 8mm dia. tor bars stirrups @ 190 mm c/c as per approved drawing. This reinforcement shall conform to IS:1786 latest edition. The foundation shall extend above sorrounding ground/driveway level for 200 mm and have slant 63mm dia. PVC sleeve cast insitu foundation for cable entry as per the drawing. Rates to include excavation, PCC, RCC and reinforcement, etc. complete(Refer attached Drawing) 241 GRP- SINGLE ARM POLE 6.0 M. 31103- Each 18523 995461 Yes HT Supply and installation of BAJAJ make Glass reinforced plastic conical UV protected Double arm pole- Flange type of 1000mm length and Height 6.0 meter with door opening with junction box mounting arrangement but exclusive of junction box, 20mm dia. threaded made to J shape and having 600 mm total length steel grade EN8 foundation bolts with nuts, templates and all complete as per approved drawing. Approved Equivalent Make - PHILIPS. Foundation RCC 1:1.5:3 shall be of size 550x550mm and depth 1200 mm with 8 nos. 12mm dia. tor bars as main bars and 8mm dia. tor bars stirrups @ 190 mm c/c as per approved drawing. This reinforcement shall conform to IS:1786 latest edition. The foundation shall extend above sorrounding ground/driveway level for 200 mm and have slant 63mm dia. PVC sleeve cast insitu foundation for cable entry as per the drawing. Rates to include excavation, PCC, RCC and reinforcement, etc. complete(Refer attached Drawing). 242 S & F OF STREETLIGHT 31103- Each 8663 995461 Yes FITTING Supply, fixing, testing and commissioning of Street Light unit with 90 W LED Light with flame proof fixtures of HPCL approved make suitable to fix at the top of lighting pole supplied by vendor. Job includes completion of electrical termination works, supply of glands, lugs etc. All 243 S & F OF HOARDING LIGHT 70 31103- Each 7127 995461 Yes W Supply and fixing Philips make Cat. QVF 135 hoarding light fixture (IP65) with Metal Halide MHN-TD 70W lamp, control gear box, light weight corrosion- resistant pressure die cast housing with universal mounting bracket, all accessories energy efficient copper ballast, heat resistant toughened glass cover, electronic ignitor, reflector, power factor improvement capacitor etc. complete. Approved equivalent Crompton make Cat. TH 6 MH(DE). The job includes fixing the street light fixtures and wiring as approved. 244 FIX.HPCLSUPPLIED STREET 31103- Each 1181 995461 Yes LIGHT. Fixing of street light fixture including providing flexible wire from junction box to top of the pole. 245 FIX HPCLSUPPLIED 31103- Each 2517 995461 Yes HOARDINGLIGHT Fixing oHoardingt light fixture including providing flexible wire and junction box with connector of approved make to fixtures and termination of the same with non flp glands. 246 EARTHING PIT- PLATE 31103- Each 13248 995424 Yes ELECTRODE Providing plate electrode earthing as per IS 3043 and attached drawing including excavation of depth 3.2 m, supplying and fixing plate electrode of size 600x600 mm and thickness 6.3 mm (GI) or 3.15 mm (Copper), 50mm dia GI pipe of heavy duty (wall thickness 4.5 mm) with funnel for watering, wire mesh, GI flat (2 nos. 50x6 mm ) collars, two connecting GI strips (50x6 mm) from plate electrode to collar, fixing & using using GI nut bolts with bitumen coating and welding as per drawing, filling the pit with alternate layers of charcoal and salt, back filling, constructing 230 mm thick Brick Masonry chamber 1000(length)x500(width)x600 (depth) mm internal size with plastering 10 mm thick and embedded 50 mm dia PVC conduit openings at two places packed with jute soaked in bitumen at the entrances, 100mm thick PCC 1:3:6 at the bottom of chamber, providing 3 mm thick MS sheet cover with diagonal bracings of 25x3 mm flats, frame and hinge arrangement covering full opening, grouting the cover frame in PCC 1:2:4 bed 230x75 mm, painting two coats of approved colour synthetic enamel paint over a coat of red oxide primer etc. complete. job also includes supply,fixing of MS sheet name/ID plate for earthing pit including painting etc as per the prevailing norms of IS/BIS / as per the direction of EIC. Size 300mmX200mm and 1.2 mm thick with MS flat/square bar for grouting.Rate includes carrying out earth resistance testing of the earth pit provided, submitting report and painting resistance, test date and pit identification no. on cover top.(Refer attached Drawing) 247 EARTHING PIT- PIPE 31103- Each 7581 995428 Yes ELECTRODE Providing pipe electrode earthing as per IS 3043 and attached drawing including excavation of depth 3.75 m, supplying and fixing pipe electrode of size 50 mm dia heavy duty (wall thickness 4.5 mm) GI pipe with funnel for wateing, wire mesh, GI flat (50x6 mm) collar joined to pipe using 50x6 mm strip and GI nut bolts with bitumen coating as per drawing, filling the pit with alternate layers of charcoal and salt, back filling, constructing 230 mm thick Brick Masonry chamber 400(length)x400(width)x400 (depth) mm internal size with plastering 10 mm thick and embedded 50 mm dia PVC conduit openings at two places packed with jute soaked in bitumen at the entrances, 100mm thick PCC 1:3:6 at the bottom of chamber, providing CI cover with CI frame in hinge arrangement covering full opening, grouting the cover frame in PCC 1:2:4 bed 230x75 mm, painting two coats of approved colour synthetic enamel paint over a coat of red oxide primer etc. complete. Rate includes carrying out earth resistance testing of the earth pit provided, submitting report and painting resistance, test date and pit identification no. on cover top.Job also includes supply,fixing of MS sheet name/ID plate for earthing pit including painting etc as per the prevailing norms of IS/BIS / as per the direction of EIC. Size 300mmX200mm and 1.2 mm thick with MS flat/square bar for grouting. 248 10 SWG COPPER WIRE 31103- Meters 111 995461 Yes Supply and fixing 10 SWG copper wire for earthing connection to pumps, canopy columns etc. 249 GI FLAT-50X6 MM 31103- Meters 292 995424 Yes Supply, laying, connection & testing bare earthling conductor for inter-connecting the earthing stations and various equipment in built up trenches, walls/ceiling, buried in ground generally or as specified and shown on the drawing complete with all accessorie 250 GI FLAT-25X3 MM 31103- Meters 90 995424 Yes Supply, laying, connection & testing bare earthling conductor for inter-connecting the earthing stations and various equipment in built up trenches, walls/ceiling, buried in ground generally or as specified and shown on the drawing complete with all accessorie 25x3 GI flat 251 MS CHEQURED PLATE 31103- Kilograms 78 995468 Yes Providing and fixing 6mm thick MS chequered plate including making holding arrangements, painting with two coats of red oxide primer and two coats of synthetic enamel paint etc. 252 EMERGENCYSWITCH 31103- Each 3485 995461 Yes (MASHRUM) Supply, Installation & Commissioning of Emergency Switch (Mashrum type Push button) of 63 Amp. Approved make are : L&T / Indo Asian / Havels or as approved by Engg Deptt. 253 1 PHASE SERVOSTABILISER- 5 31103- Each 14052 995461 Yes KVA Supply , installation and commissioning of 1 phase AIR cooled balanced / unbalanced load servo controlled voltage stabiliser of rating 10 KVA (Make - Logicstat / Blue bird / Bhurji / Techno Vision /Numeric or HPCL approved make) including auto / manual control, overload trip relay, low / high voltage cut-off, single phase protector, cost of oil. Rate includes making input and output connection but excludes supply of necessary cables, lugs and clamping. Party to furnish manufacturer's test certificate alongwith supply and provide warranty/gaurantte for a period of one from the date of installation. Detailed specifications are as under: Specifications 1 Phase1. Input Voltage 170 - 270VAC2. Output Voltage 230 VAC3. Operating frequency 50 HZ4. Output Voltage Regulation +/- 1%5. Response time < 3 msecs6. Rate of Correction 12 to 60 V / Sec7. Efficiency > 98%8. Wave form Distortion Nil9. Effect on Power Factor Nil10. Operating Temperature 10 - 60 Degree C11. Duty of operation Continuous at 100%12. Cooling Air Cooling PROTECTIONSUNDER / OVER VOLTAGE REQUIREDOver Load Protection MCBINDICATIONMains On RequiredUnder/Over Voltage RequiredVoltmeter 0 - 300 VACAMP meter OptionalAlarm Optional 254 250 VA CVT 31103- Each 6137 998736 Yes CVT Supply and fixing of constant voltage transformer of aproved make - Logicstat, Blue bird, Sukam, Bhurji , Numeric or equivalent. Party to furnish manufacturer's test certificate alongwith supply and provide warranty/gaurantte for a period of one year from the date of installation. Rating 250 VA rating CVT Technical SpecificationsInput Voltage 180 to 260V AC/1 Ph/50±2HzOutput Voltage 220VAC/230VAC±1%Frequency Effect Approx. 1.5% change in output voltage, for 1% change in input frequencyEfficiency 90%, Typical, at full loadCommon-Mode-Noise Attenuation* 1:3000, Typical Normal-Mode-Noise Attenuation* 1:2500, Typical Output waveform SinusoidalTotal Harmonic Distortion 5% (Typical) at 230VAC-Input & full-load changeOutput Voltage Correction 2 cycle (max.) for no load to full load conditionsOver Load protection To be providedOperating Temperature 0ºC to +50ºCOperating Humidity 95% RH, non condensingMetering 0-300v, M.I. meter; Accuracy ± 2% FSD (To monitor output voltage)Environment 0-40°C, 95% RH (non condensing) 255 500 VA CVT 31103- Each 7248 998736 Yes CVT Supply and fixing of constant voltage transformer of aproved make - Logicstat, Blue bird, Sukam, Bhurji , Numeric or equivalent. Party to furnish manufacturer's test certificate alongwith supply and provide warranty/gaurantte for a period of one year from the date of installation. Rating 500 VA rating CVT Technical SpecificationsInput Voltage 180 to 260V AC/1 Ph/50±2HzOutput Voltage 220VAC/230VAC±1%Frequency Effect Approx. 1.5% change in output voltage, for 1% change in input frequencyEfficiency 90%, Typical, at full loadCommon-Mode-Noise Attenuation* 1:3000, Typical Normal-Mode-Noise Attenuation* 1:2500, Typical Output waveform SinusoidalTotal Harmonic Distortion 5% (Typical) at 230VAC-Input & full-load changeOutput Voltage Correction 2 cycle (max.) for no load to full load conditionsOver Load protection To be providedOperating Temperature 0ºC to +50ºCOperating Humidity 95% RH, non condensingMetering 0-300v, M.I. meter; Accuracy ± 2% FSD (To monitor output voltage)Environment 0-40°C, 95% RH (non condensing) 256 GSB LAYER 31103- Square Meters 281 995421 Yes Filling material with GSB (Granular Sub Base) of 150 mm thick : The GSB shall consists of the following material : 40 to 53MM Size metal : 40%, 40 to 53MM Size metal : 40%, 20 to 40MM size metal 20%, 10 to 20MM size metal 20% and 0 to 10MM size metal 20%. Job shall include supply and filling GSB materials in compacted layers of 150 MM . Payment shall be released on the compacted layer provided by the vendor at site. Compaction shall be carriedout with Power roller of 80 KN to 100 KN capacity Contractor has to obtain necessary clerance from HPCL or its autorised reprensatative for first layer. Only after clearance of 1 st layer,the second layer GSB shall be provided. Job includes all material, watering, and transporation cost of the required to be completed as per the directions of the HPCL 257 WBM 1ST LAYER 100 MM THK. 31103- Square Meters 226 995421 Yes WATER BOUND MACADUM Providing and laying WBM in 100mm thick compacted thickness each using well graded stone aggregates of approved quality of 90 to 45 mm size with screening of 13.2 mm & less. Rate includes spreading metals, hand packing, filling the interstices with spalls, chips, and approved quality binder and rolling each layer with 8 to 10 MT power roller with simultaneous watering till the metal is bound by the water binder paste to achieve maximum compaction, finishing the surface to proper grade and level .Rate also to include carrying out the following tests on aggregates and test results to be submitted to EIC before use and shall meet following strength requirements.[LA Abrasion value : 40 % , Flakiness Index :15 %] 258 WBM 2ND LAYER 75 MM THK. 31103- Square Meters 179 995421 Yes WATER BOUND MACADUM Providing and laying WBM in 75 mm thick compacted thickness each using well graded stone aggregates of approved quality of 90 to 45 mm size with screening of 13.2 mm & less. Rate includes spreading metals, hand packing, filling the interstices with spalls, chips, and approved quality binder and rolling each layer with 8 to 10 MT power roller with simultaneous watering till the metal is bound by the water binder paste to achieve maximum compaction, finishing the surface to proper grade and level .Rate also to include carrying out the following tests on aggregates and test results to be submitted to EIC before use and shall meet following strength requirements.[LA Abrasion value : 40 % , Flakiness Index :15 %] - Second Layer 75 mm thick using 63 to 40mm size stone aggregate with screening of 13.2 mm & less. 259 WBM 3RD LAYER 75 MM THK. 31103- Square Meters 182 995421 Yes WATER BOUND MACADUM Providing and laying WBM in 75 mm thick compacted thickness each using well graded stone aggregates of approved quality of 90 to 45 mm size with screening of 13.2 mm & less. Rate includes spreading metals, hand packing, filling the interstices with spalls, chips, and approved quality binder and rolling each layer with 8 to 10 MT power roller with simultaneous watering till the metal is bound by the water binder paste to achieve maximum compaction, finishing the surface to proper grade and level .Rate also to include carrying out the following tests on aggregates and test results to be submitted to EIC before use and shall meet following strength requirements.[LA Abrasion value : 40 % , Flakiness Index :15 %] -third layer of 75mm thick using 53 to 22.2 mm size stone aggregate with screening of 13.2 mm & less 260 BBM - 100MM 31103- Square Meters 631 995421 Yes Providing and laying bitumenous bound macadum surface 100 mm thick after compaction including supplying all materials spreading 40 mm size trap metal layers and key aggreagates heating and spraying bitumen of grade IS grade S-65 with penetration 60/70 at the rate of 400 kg/100 sqm and compacting after finishing by 6mm thick layer of grit to the satisfaction of the engineer with a roller not less than 10 MT. 261 BITUMINOUS MACADAM 75MM 31103- Square Meters 473 995421 Yes BITUMINOUS MACADAM 75mm THICK USING 60/70 GRADE BITUMEN: Providing and laying premix bituminous macadam base course with good quality stone aggregate mix as follow 20mm = 30%, 12mm=35%,6mm=15% coarse sand 15 % and bitumen 60/70 grade 6% by weight .The aggregate shall be of quality size and grading as specified and bitumen shall be straight run bitumen of grade 60/70 @ 6 % by weight of total mix . The job includes hot mixing by using mini hot mix plant , transporting mix material and laying the same to the required level & grade, rolling with power roller of 8 to 10 Ton capacity to achieve required compaction and density all material , labour etc. complete. The macadam course shall be laid in two layers of around equal thickness, each layer shall be rolled and compacted. Tack coat shall be applied between the two layers@ 9.8 kg per 10 sqm. 262 SEMI DENSE BITU.CONC. 31103- Square Meters 203 995454 Yes 25MM THK SEMI DENSE BITUMINOUS CONCRETE (25 mm Thick) : Providing and laying 25 mm thick semi dense bituminous concrete on prepared surface with good quality graded stone aggregate as per following requirement -Material required per 100 Square meter Crushed stone aggregate of 13.2 mm size = 1.0 CUM , 11.2 mm size -1.6 CUM , Fine aggregate 6 mm size - 1.1 CUM Bitumen 60/70 grade including tack coat = 330 Kg .The job includes hot mixing of aggregate and bitumen by using hot mix plant transportation mixed material and laying the same , rolling with 8 to 10 Ton power roller to uniform consolidated compacted thickness of 25 mm over a tack coat of 2.0 Kg per 10 Square meter to achieve the required level and grade all material, labour etc complete. 263 SEMI DENSE BITU.CONC. 31103- Square Meters 325 995454 Yes 40MM THK SEMI DENSE BITUMINOUS CONCRETE (40 mm Thick) : Providing and laying 40 mm thick semi dense bituminous concrete on prepared surface with good quality graded stone aggregate as per following requirement: Material per 100 Square meter Area - Crushed stone aggregate of 13.2 mm size = 1.60 CUM; 11.2 mm size -2.56 CUM; Fine aggregate 6 mm size - 1.76 CUM; Bitumen 60/70 grade including tack coat = 525 Kg .The job includes hot mixing of aggregate and bitumen by using hot mix plant transportation mixed material and laying the same , rolling with 8 to 10 Ton power roller to uniform consolidated compacted thickness of 40 mm over a tack coat of 2.0 Kg per 10 Square meter to achieve the required level and grade all material , labour etc complete . 264 SEMI DENSE 31103- Square Meters 588 995454 Yes BITU.CONC.100MM THK SEMI DENSE BITUMINOUS CONCRETE (100 mm Thick) : Providing and laying 40 mm thick semi dense bituminous concrete on prepared surface with good quality graded stone aggregate as per following requirement: Material per 100 Square meter Area - Crushed stone aggregate of 13.2 mm size = 1.60 CUM; 11.2 mm size -2.56 CUM; Fine aggregate 6 mm size - 1.76 CUM; Bitumen 60/70 grade including tack coat = 525 Kg .The job includes hot mixing of aggregate and bitumen by using hot mix plant transportation mixed material and laying the same , rolling with 8 to 10 Ton power roller to uniform consolidated compacted thickness of 40 mm over a tack coat of 2.0 Kg per 10 Square meter to achieve the required level and grade all material , labour etc complete .SEMI DENSE BITUMINOUS CONCRETE (100 mm Thick) : Same as above but with thickness of 100 mm. 265 PREMIX CARPET-50 MM 31103- Square Meters 391 995421 Yes Providing and laying premix carpet 50 mm thick ( Consolidated) with coarse aggregate of nominal size 12.5 mm ( two part ) and 10 mm ( one part) . Quantity of bitumen (80/100 grade) used should be 36.5 Kg per 10 sqm for premix and 7.5 kg per 10 sqm for tack coat. Surface preparation by cleaning with wire brush, removing the dust etc before applying tack coat. The job includes compaction by 8 to 10 Ton roller to proper camber and slope all complete as per direction of Engg.-In-Charge. 266 PREMIX CARPET-100 MM 31103- Square Meters 782 995421 Yes Providing and laying premix carpet 100 mm thick ( Consolidated) with coarse aggregate of nominal size 12.5 mm ( two part ) and 10 mm ( one part) . Quantity of bitumen (80/100 grade) used should be 36.5 Kg per 10 sqm for premix and 7.5 kg per 10 sqm for tack coat. Surface preparation by cleaning with wire brush, removing the dust etc before applying tack coat. The job includes compaction by 8 to 10 Ton roller to proper camber and slope all complete as per direction of Engg.-In-Charge.100mm thick carpet : Specification same as above item but two layers of 50mm thick each. 267 SEAL COAT 12 MM 31103- Square Meters 146 995421 Yes Providing and laying seal coat of 12 mm thick with 6.3 mm down coarse aggregate. Quantity of bitumen used should be 19.6 Kg per 10 square meter of seal coat . The job includes compaction by 8 to 10 Ton power roller to proper camber and slope all complete as per direction of Engg.-In-Charge. Finishing should be done by applying a layer of sand in order to fill up the voids. NOTE : All the asphalting jobs shall be started only after stacking bitumen at the site as per theoretical calculation considering the area. The total job including seal coat to be carried out in one go. In case of any delay in laying the seal coat after laying the premix carpet, additional tack coat @ 5.0 Kg per 10 sqm to be laid without any extra payment. 268 MASTIC WEARING COARSE 31103- Square Meters 995 995421 Yes 25MM MASTIC WEARING COARSE (25 mm Thick): Providing and laying 25 mm thick mastic wearing coarse using stone aggregates as per following specs- Coarse aggregated to be used 35% of total mix , Balance shall be coarse sand and filler material, Lime stone powder and industrial bitumen of grade85/25 confirming to IS 702 prepared by using Mastic cooker and laid to required level and slope including providing anti skid surface with bitumen precoated fine grain chipping of 9.5 mm to 13.2 mm size at the rate of 0.005 CUM per 10 square meter of approx. spacing of 10 cm center to center in both directions , pressed into surface protruding 1mm to 4 mm over mastic surface including cleaning the surface removal of debris etc. material and labour complete. NOTE : Lime stone powder shall have minimum calcium carbonate content of 80 %. 269 RAISED PAVEMENT MARKERS 31103- Each 505.14 995421 Yes Providing and fixing 3M make adhesive type heavy duty high performance raised pavement markers with shanks (Glow Stubs) made of Engineering Polymer in size 101x89mm with height 20mm having retroreflective element on both sides and to be fixed on cement concrete rigid pavement with adhesive/shanks as recommended by manufacturer and interspacing as per Engg.-in-Charge approval. Rate includes necessary before/after cleaning, tools and tackles etc. all complete(Refer attached Drawing) 270 LINEAR DELINEATION 31103- Square Meters 4644 995468 Yes SHEETING Providing and fixing 3M make Linear Delineation Sheeting (LDS) comprising of panels of size 4" wide and 33" length in yellow colour. The panel is to be constructed of cube corner Retro Reflective Material bonded to Aluminium substrate with memmed lateral edges. The panel assembly shall have a repeating raised lateral ridge every 2.25 inch, 0.34 inch in height. The typical retro reflective values at 88.5 degree entrance angle / 0.2 degree observation angle to be 270, 162, 11080 (candelas/ meter square / lux) of yellow colour. The fitting will be done on brick masonry/concrete walls as per manufacturer specified procedures and approved nails/fixtures in line and level as per advice of Engg.-in- Charge (EIC). Powder coated MS angle edge protection shall be provided to make it theft resistant. Measurement and payment shall for per no. of 33inch long and 4" wide LDS provided as per EIC advice. (Refer attached Drawing) 271 RELAYING OF PAVERS 31103- Square Meters 259 995429 Yes Laying of HPCL supplied/existing old pavers in line and level , as per attached specifications. The job includes supplying and laying sand bedding, compacting using plate vibrator, all material and Laying of HPCL supplied/existing old pavers in line and level , as per attached specifications. The job includes supplying and laying sand bedding, compacting using plate vibrator, all material and labour complete. Pavers will be laid at 45 degree to road line in 1 red and 2 grey arrangement. Plan of laying will be developed by the contractor and prior approval of EIC will be taken before commencement of laying.. 272 DRESSING OF DRIVEWAY 31103- Square Meters 106.1 995432 Yes Dressing of existing driveway wherever required including excavation to required depth and providing / laying metalling upto 3" or as per required thickness compacted to level desired by ramming, filling up the interstices with stone chips, stone grit powder including all materials and labour, wherever necessary as per instruction of HPCL Engineer/Architect. 273 PRECAST KERB 300X150X300 31103- Meters 431 995442 Yes RCC PRECAST KARB 0.3X0.15X0.30 : Providing and erecting kerb wall of concrete precast kerb of required size & shape with M20 grade concrete using 20mm and down size crushed stone aggregates including shuttering, mixing, compacting , pond curing for 14 days etc. as per IS 456, transporting from the place of casting errcting the wall with filling the joints with necessary cement slury etc. complete. (Refer attached Drawing) 274 RCC 1:2:4 DRIVEWAY 31103- Cubic Meters 7692 995454 Yes Providing and laying 150mm thick RCC driveway with 1:2:4 nominal mix using 20mm and down size crushed stone aggregates in panels using slotted MS channel shuttering, machine mixing, vibrating with screed board vibrator, pond curing for 14 days, vaccum dewatering, finished with power trowelling. Concreting shall be carried out as per IS 456 Rate shall also include providing approved quality polythene paper below the driveway, constructing horizontal and longitudinal vatas with 1:10 CM for curing, levelling depressions if any in the base with 20mm stone aggregates and stone dust..Testing of cube, reinforcement steel, stone aggregates, sand, cement etc. to be carried out by contractor at no extra cost.Tubing, ducting, trenching and other necessary embedded items in concrete shall be checked with architect/HPCL representative before concreting.Grooves shall be cut in the RCC driveway and same shall be filled with Bitumen at no extra cost. Rate shall be excluding reinforcement steel which shall be paid separately .(Refer attached Drawing) 275 RCC WITH M-25 READY MIX 31103- Cubic Meters 7827 995454 Yes Providing and laying 150mm thick RCC driveway with M-25 mix using 20mm and down size crushed stone aggregates in panels using slotted MS channel shuttering, machine mixing, vibrating with screed board vibrator, pond curing for 14 days, vaccum dewatering, finished with power trowelling. Concreting shall be carried out as per IS 456 Rate shall also include providing approved quality polythene paper below the driveway, constructing horizontal and longitudinal vatas with 1:10 CM for curing, levelling depressions if any in the base with 20mm stone aggregates and stone dust..Testing of cube, reinforcement steel, stone aggregates, sand, cement etc. to be carried out by contractor at no extra cost.Tubing, ducting, trenching and other necessary embedded items in concrete shall be checked with architect/HPCL representative before concreting.Grooves shall be cut in the RCC driveway and same shall be filled with Bitumen at no extra cost. Rate shall be excluding reinforcement steel which shall be paid separately .( using M-25 grade ready mix concrete- No Fly ash content).(Refer attached Drawing) 276 RCC 1:2:4 WITHOUT 31103- Cubic Meters 7529 995454 Yes DEWATERING Providing and laying 150mm thick RCC driveway with 1:2:4 nominal mix using 20mm and down size crushed stone aggregates in panels using slotted MS channel shuttering, machine mixing, vibrating with screed board vibrator, pond curing for 14 days,Concreting shall be carried out as per IS 456 Rate shall also include providing approved quality polythene paper below the driveway, constructing horizontal and longitudinal vatas with 1:10 CM for curing, levelling depressions if any in the base with 20mm stone aggregates and stone dust..Testing of cube, reinforcement steel, stone aggregates, sand, cement etc. to be carried out by contractor at no extra cost.Tubing, ducting, trenching and other necessary embedded items in concrete shall be checked with architect/HPCL representative before concreting.Grooves shall be cut in the RCC driveway and same shall be filled with Bitumen at no extra cost. Rate shall be excluding reinforcement steel which shall be paid separately . but without vaccum dewatering and power trowelling with 1:2:4 nominal mix 277 RCC PRECAST COVER 31103- Square Meters 3069 995454 Yes Providing and laying factory made pre-cast RCC (Concrete Grade MINIMUM M35) covers with MS lifting lugs having thickness 90 mm and size to cover the pipeline trench. The cover shall be suitable for AAA class load (Minimum 35 MT rolling axle load) and shall have MS enclosure of minimum 2 mm thick allaround including reinforcement suitable for load class. The clear opening span of trench shall not be more than 650 mm.(Refer attached Drawing) 278 INS.CHAMBERS-600X600 31103- Each 7446 995456 Yes INSPECTION CHAMBER Providing and constructing following size inspection chambers with 230mm thick brick masonary in 1:5 cement mortar, excavation, 75mm thick PCC 1:3:6 bed, plasteringthe internal side walls and PCC top surface with neat cement finish and fixing of chamber with Pre cast RCC frame to the plumb & level as required and instllation of the RCC cover to the level Complete in all respects(Refer attached Drawing) 279 INS CHAMBERS-450X450 31103- Each 5527 995456 Yes INSPECTION CHAMBER Providing and constructing following size inspection chambers with 230mm thick brick masonary in 1:5 cement mortar, excavation, 75mm thick PCC 1:3:6 bed, plasteringthe internal side walls and PCC top surface with neat cement finish and fixing of chamber with Pre cast RCC frame to the plumb & level as required and instllation of the RCC cover to the level Complete in all respects 450X450X700MM INS CHAMBERS(Refer attached Drawing) 280 900X900MMD.I.COVER(HEAVY 31103- Each 22517 995468 Yes DUTY) Supply, delivery,installation of Ductile iron Manhole covers( Make : Jeyswal NECO)900 x 900mm D.I. Casting 198 Kg. (Heavy Duty) with 450mm Dia opening in the Middle HEAVY DUTY GRADE C -250 LOAD BEARING CAPACITY: 25.00 M.T. 281 600X600MMD.I.COVER(HEAVY 31103- Each 10557 995468 Yes DUTY) Supply, delivery,installation of Ductile iron Manhole covers( Make : Jeyswal NECO) - 600mm Dia D.I. Casting – 85 Kg. (Heavy Duty) (Circular Cover with Square Frame) 282 450X450MMD.I.COVER(HEAVY 31103- Each 6877 995468 Yes DUTY) Supply, delivery,installation of Ductile iron Manhole covers( Make : Jeyswal NECO) - 450mm Dia D.I. Castings 55 Kgs (Heavy Duty) (Circular Cover with Square Frame) 283 TRAN.70 KLTANK- 50 KM 31103- Each 16395 996511 Yes Transportation of MS horizontal tanks from fabrication shop to site including loading, transportation,unloading etc. Complete upto 50KM from the source TRANS. 70 KL TANK with in 50 KM 284 TRANS.70 KL TANK BEYOND 31103- Each 16395 996511 Yes 50 KM Transportation of MS horizontal tanks from fabrication shop to site including loading, transportation,unloading etc. Complete from the source beyond 50 km 285 TRANS.45 KL WITHIN 50 KM 31103- Each 12683 996511 Yes Transportation of 45KL horizontal tanks to site including loading, unloading etc. Complete upto 50KM from the source 286 TRANSP. OF 45 KL BEYOND 50 31103- Kilometers 80.55 996511 Yes KM Transportation of 45KL horizontal tanks to site including loading, unloading etc. Complete -beyond 50 km 287 TRANSP. OF 35 KL WITHIN 50 31103- Each 11881 996511 Yes KM Transportation of 35KL horizontal tanks to site including loading, unloading etc. Complete upto 50KM from the source 288 TRANSP. OF 35 KL BEYOND 50 31103- Kilometers 52.12 996511 Yes KM Transportation of 35KL horizontal tanks to site including loading, unloading etc. Complete but beyond 50 km 289 TRANSP. OF 22 KL WITHIN 50 31103- Each 10716 996511 Yes KM Transportation of 22KL horizontal tanks to site including loading, unloading etc. Complete upto 50KM from the source 290 TRANSP. OF 22 KLBEYOND 50 31103- Kilometers 52.12 996511 Yes KM Transportation of 22KL horizontal tanks to site including loading, unloading etc. Complete from the source beyond 50 km 291 TRANSP. OF 16 KL WITHIN 50 31103- Each 10017 996511 Yes KM Transportation of 16KL horizontal tanks to site including loading, unloading etc. Complete upto 50KM from the source 292 TRANSP. OF 16 KL BEYOND 50 31103- Kilometers 52.12 996511 Yes KM Transportation of 16KL horizontal tanks to site including loading, unloading etc. Complete from the source beyond 50 km 293 TRANSP. OF 9 KL WITHIN 50 31103- Each 10017 996511 Yes KM Transportation of 9KL horizontal tanks to site including loading, unloading etc. Complete upto 50KM from the source 294 TRANSP. OF 9 KL BEYOND 50 31103- Kilometers 45.6 996511 Yes KM Transportation of 9KL horizontal tanks to site including loading, unloading etc. Complete upto 50KM from the source- but beyond 50 km 295 TR.MONO/DUEL DU<50KM 31103- Lot 2861 996511 Yes LOT-5NO Transportation of DUs to site including loading, unloading etc. Complete upto 50KM from the sourceThe quantity will be calculated per trip upto maximum of carrying 5 pumps per trip 296 TR.MONO/DUELDU BEYOND 31103- Kilometers 43 996511 Yes 50KM-5NO Transportation of DUs to site including loading, unloading etc. The KM will be calculated per trip upto maximum of carrying 5 pumps per trip 297 TR.MPD<50 KM LOT UPTO 5 31103- Lot 4725 996511 Yes NO Transportation of DUs to site including loading, unloading etc. Complete upto 50KM from the sourceThe quantity will be calculated per trip upto maximum of carrying 5 pumps per trip 298 TR.MPD BEY50 KM IN LOT- 5 31103- Kilometers 65 996511 Yes NO Transportation of DUs to site including loading, unloading etc. The KM will be calculated per trip upto maximum of carrying 5 pumps per trip 299 45 KL TANK INSTALLATION 31103- Each 31304 998732 Yes Installaion of HPCL supplied Tanks of 45KL capacity in earth pit /under driveway including lowering, providing holding down arrangement, Hydrostatic testing to pressure of 5psi, supplying & filling with water with necessary 50 mm dia pipe & on successful completion emptying out the water from tank , cleaning & drying the inner surfaces with cloth/ cotton waste etc., doping with three coats of shalimastic HD over a coat of GETSET (Type-A) primer with minimum thickness of 1.5mm. 24Hrs drying time between each coat has to be maintained.(Refer attached Drawing) 300 35KL TANK INSTLN. 31103- Each 28078 998732 Yes Installaion of HPCL supplied Tanks of 35KL capacity in earth pit /under driveway including lowering, providing holding down arrangement, Hydrostatic testing to pressure of 5psi, supplying & filling with water with necessary 50 mm dia pipe & on successful completion emptying out the water from tank , cleaning & drying the inner surfaces with cloth/ cotton waste etc., doping with three coats of shalimastic HD over a coat of GETSET (Type-A) primer with minimum thickness of 1.5mm. 24Hrs drying time between each coat has to be maintained. 35 KL(Refer attached Drawing) 301 22KL TANK INSTLN. 31103- Each 21331 998732 Yes Installaion of HPCL supplied Tanks of 22KL capacity in earth pit /under driveway including lowering, providing holding down arrangement, Hydrostatic testing to pressure of 5psi, supplying & filling with water with necessary 50 mm dia pipe & on successful completion emptying out the water from tank , cleaning & drying the inner surfaces with cloth/ cotton waste etc., doping with three coats of shalimastic HD over a coat of GETSET (Type-A) primer with minimum thickness of 1.5mm. 24Hrs drying time between each coat has to be maintained. 22 KL(Refer attached Drawing) 302 16KL TANK INSTLN. 31103- Each 18278 998732 Yes Installaion of HPCL supplied Tanks of 16KL capacity in earth pit /under driveway including lowering, providing holding down arrangement, Hydrostatic testing to pressure of 5psi, supplying & filling with water with necessary 50 mm dia pipe & on successful completion emptying out the water from tank , cleaning & drying the inner surfaces with cloth/ cotton waste etc., doping with three coats of shalimastic HD over a coat of GETSET (Type-A) primer with minimum thickness of 1.5mm. 24Hrs drying time between each coat has to be maintained. 16 KL(Refer attached Drawing) 303 9KL TANK INSTLN. 31103- Each 15228 998732 Yes Installaion of HPCL supplied Tanks of 9 KL capacity in earth pit /under driveway including lowering, providing holding down arrangement, Hydrostatic testing to pressure of 5psi, supplying & filling with water with necessary 50 mm dia pipe & on successful completion emptying out the water from tank , cleaning & drying the inner surfaces with cloth/ cotton waste etc., doping with three coats of shalimastic HD over a coat of GETSET (Type-A) primer with minimum thickness of 1.5mm. 24Hrs drying time between each coat has to be maintained. 9 KL(Refer attached Drawing) 304 PUMP ISLANDS SS GAURAD 31103- Meters 3491 995477 Yes Fabricating and fixing S. S. Railing with 40 mm SS square tube & 25 mm dia SS pipe ( SS of 304 grade) as per the drawing. The item includes fabrication, buffing of the railing upto req. finish, fixing the railing at position with m20 grade concrete, finising the driveway properly etc. complete(Refer attached Drawing) 305 PUMPISLAND MS GUARD 31103- Meters 1272 995477 Yes Fabricating and fixing MS Railing with 50 mm DIA and 40 mm dia B CLASS MS pipes of Swastik/Jindal/Zenith make as per the Standard HPCL drawing. The item includes fabrication, buffing of the railing upto req. finish, fixing the railing at position with m20 grade concrete, finising the driveway properly etc. complete 306 PUMP ISLAND 31103- Meters 3064.51 995456 Yes Construction of pump island 1m wide with 230mm thick brick masonry in CM 1:5, 12mm thick plastering in Cm 1:4 roughened to receive granite tiles including excavation, 75mm thick PCC 1:4:8 , sand filling and constructing the wall 150mm above the finished driveway level and 450mm below the finished driveway level .(Refer attached Drawing) 307 INSTLN. OF MONO / DUEL 31103- Each 1278 998732 Yes PUMPS Installation of MONO / DUEL pumps on pedestal including providing & fixing foundation bolt of 12mm dia & connecting suctionpipe, electrical, earthing connections to the pump. (Refer attached Drawing) 308 INSTLN. OF DUAL/2T MIX 31103- Each 1627 998732 Yes PUMPS Installation of DUAL pumps on pedestal including providing & fixing foundation bolt of 12mm dia & connecting suctionpipe, electrical, earthing connections to the pump. (Refer attached Drawing) 309 INSTLN. OF MPD PUMPS 31103- Each 3467 998732 Yes Installation of MPD pumps on pedestal including providing & fixing foundation bolt of 12mm dia & connecting suctionpipe, electrical, earthing connections to the pump.(Refer attached Drawing) 310 40MM DIA PIPELINE 31103- Meters 482 995429 Yes Supplying & Laying 'C' Class MS ERW black steel screwed pipeline (TATA/Zenith /JINDAL make) Conforming to IS 1239 (part I) - latest edition to the required slope & alignment with heavy duty MS fittings like elbows, tees including doping pipe line with 1.5mm thick layer of shalimastic HD in 2 coats etc, complete. The joints are to be made leak proof by using jointing materials like Litharge, Glycerin, Shellac, holdite . The pipeline to be tested with 5PSI as per standard specification. Size 40 mm Diameter. 311 50MM DIA PIPEINE 31103- Meters 713 995429 Yes Supplying & Laying 'C' Class MS ERW black steel screwed pipeline (TATA/Zenith /JINDAL make) Conforming to IS 1239 (part I) latest edition to the required slope & alignment with heavy duty MS fittings like elbows, tees including doping pipe line with 1.5mm thick layer of shalimastic HD in 2 coats etc, complete. The joints are to be made leak proof by using jointing materials like Litharge, Glycerin, Shellac, holdite . The pipeline to be tested with 5PSI as per standard specification. size 50 mm Diameter 312 80MM DIA PIPELINE 31103- Meters 1174 995429 Yes Supplying & Laying 'C' Class MS ERW black steel screwed pipeline (TATA/Zenith /JINDAL make) Conforming to IS 1239 (part I) - latest edition to the required slope & alignment with heavy duty MS fittings like elbows, tees including doping pipe line with 1.5mm thick layer of shalimastic HD in 2 coats etc, complete. The joints are to be made leak proof by using jointing materials like Litharge, Glycerin, Shellac, holdite . The pipeline to be tested with 5PSI as per standard specification. size 80 mm Diameter 313 S/F/L MS C CL.WELDED 31103- Meters 531 995424 Yes PL40MMDIA Supplying & Laying 40MM Dia Heavy-duty 'C' Class MS Steel ERW Welded P/L ( TATA/Zenith/JINDAL make) Conforming to IS 1239 (part I) latest edition to the required slope & alignment with heavy duty MS fittings like elbows, sockets,unions , tees etc. including doping pipe line with 3 coats of 'Shalimastic HD THIXOTROPIC of STP cold applied anti corrosive treatment after preparing the surface as per manufacturer specifications. The joints are to be made leak proof. The P/L which would laid aboveground shall be painted with two coats of synthetic enamel over two coats of Zinc Chromate primer of approved quality and shade. The pipeline shall be tested at a pressure of 5Kg / sqcm. 314 S/F/L MS C CL.WELDED 31103- Meters 757 995424 Yes PL50MMDIA Supplying & Laying 40MM Dia Heavy-duty 'C' Class MS Steel ERW Welded P/L ( TATA/Zenith/JINDAL make) Conforming to IS 1239 (part I) - latest edition to the required slope & alignment with heavy duty MS fittings like elbows, sockets,unions , tees etc. including doping pipe line with 3 coats of 'Shalimastic HD THIXOTROPIC of STP cold applied anti corrosive treatment after preparing the surface as per manufacturer specifications. The joints are to be made leak proof. The P/L which would laid aboveground shall be painted with two coats of synthetic enamel over two coats of Zinc Chromate primer of approved quality and shade. The pipeline shall be tested at a pressure of 5Kg / sqcm. Pipe dia as 50MM DIA 315 S/F/L MS C CL.WELDED 31103- Meters 1282 995424 Yes PL80MMDIA Supplying & Laying 40MM Dia Heavy-duty 'C' Class MS Steel ERW Welded P/L ( TATA/Zenith/JINDAL make) Conforming to IS 1239 (part I) - latest edition to the required slope & alignment with heavy duty MS fittings like elbows, sockets,unions , tees etc. including doping pipe line with 3 coats of 'Shalimastic HD THIXOTROPIC of STP cold applied anti corrosive treatment after preparing the surface as per manufacturer specifications. The joints are to be made leak proof. The P/L which would laid aboveground shall be painted with two coats of synthetic enamel over two coats of Zinc Chromate primer of approved quality and shade. The pipeline shall be tested at a pressure of 5Kg / sqcm. Pipe dia as 80MM DIA 316 ANGULAR CHECK VALVE(NRV) 31103- Each 2691 995462 Yes Supply and fixing ISI marked angular check valve of 50 mm Dia 317 FLANGE JOINT 40MM DIA 31103- Each 393 995423 Yes Supplying & fixing of 40MM dia C Class MS Flanges for Petroleum products of approved make and of Heavy duty usage. 318 FLANGE JOINT 50MM DIA 31103- Each 437 995423 Yes Supplying & fixing of 50MM dia C Class MS Flanges for Petroleum products of approved make and of Heavy duty usage. 319 S/F BALL VALVES 40MM DIA 31103- Each 1623 995462 Yes Supply and fixing ISI marked Ball valve of Leader/ Sant/ Syall make. 80MM Dia 320 S/F BALL VALVES 50MM DIA 31103- Each 2145 995423 Yes Supply and fixing ISI marked Ball valve of Leader/ Sant/ Syall make. 50MM Dia 321 INSTALLATION OF STP 31103- Each 1742 998732 Yes Installation of STP pumps on Tank Manhole including nessasry connection with suction pipe, delivery pipe as per instructions of STP Mfr's recommendations incl .electrical, earthing etc. complete. 322 AL FILL CAP 31103- Each 1029 998739 Yes Supply and fixing AL fill cap of 80mm dia with locking arrangement including Godrej 6 lever brass lock 323 AL DIP CAP 31103- Each 1039 998739 Yes Supply and fixing AL dip cap of 50mm dia with locking arrangement including Godrej 6 lever brass lock 324 GRANITE SLAB 31103- Square Meters 4630 995456 Yes Providing and fixing 18 mm thick pre polished water cut black granite slab for pump island top including providing 25mm thk bed cement mortar 1:5 (1 cement : 5 coarse sand) , floating cement slurry and finishing the joints with white cement mixed with matching colour pigment. 325 GRANITE TILES 31103- Square Meters 2554 995474 Yes Providing and fixing 10 mm thick pre polished water cut black granite tiles for pump island dado including providing 12mm thk bed cement mortar 1:4 (1 cement : 4 coarse sand) , fixing the tiles with neat cement paste and finishing the joints with white cement mixed with matching colour pigment. 326 SILICA GEL TRAP 31103- Each 1812 995462 Yes Providing and fixing flanged end silica get trap for vent as per standard HPCL design including filling of silica get crystals, cutting and reconnecting vent pipes, etc, complete. 327 TEE VENT HOOD 31103- Each 639 998731 Yes Providing and fixing MS Tee Vent Hood with brass wire guage of 25 mesh/sq.inch as per standard specification. 328 EXUMING- 9 KL TANK 31103- Each 14416 995442 Yes Exhuming under ground tanks with all fittings from earth pit including disconnecting suction, fill, vert pipe , opening man hole cover, excavation, dewatering if encountered, degassing of tank, stacking the tank as directed by EIC etc.Complete. Back filling with sand will be paid separately. Size 9KL tank. 329 EXUMING- 14/16KL TANK 31103- Each 17318 995442 Yes Exhuming under ground tanks with all fittings from earth pit including disconnecting suction, fill, vert pipe , opening man hole cover, excavation, dewatering if encountered, degassing of tank, stacking the tank as directed by EIC etc.Complete. Back filling with sand will be paid separately. 14/16KL tank 330 EXUMING- 22 KL TANK 31103- Each 18869 995442 Yes Exhuming under ground tanks with all fittings from earth pit including disconnecting suction, fill, vert pipe , opening man hole cover, excavation, dewatering if encountered, degassing of tank, stacking the tank as directed by EIC etc.Complete. Back filling with sand will be paid separately. 22KL tank 331 EXUMING- 45 KL TANK 31103- Each 27781 995442 Yes Exhuming under ground tanks with all fittings from earth pit including disconnecting suction, fill, vert pipe , opening man hole cover, excavation, dewatering if encountered, degassing of tank, stacking the tank as directed by EIC etc.Complete. Back filling with sand will be paid separately. 45KL tank 332 EXUMING- 70KL TANK 31103- Each 37501 995442 Yes Exhuming under ground tanks with all fittings from earth pit including disconnecting suction, fill, vert pipe , opening man hole cover, excavation, dewatering if encountered, degassing of tank, stacking the tank as directed by EIC etc.Complete. Back filling with sand will be paid separately. 70KL tank 333 DISMANTLING OF P/ISLAND 31103- Square Meters 1202 995431 Yes Dismantling of existing pump island 1m wide and carting away debris including removal of pump and disconnecting pipeline etc. complete. 334 DISMANTLING RCC 31103- Cubic Meters 2373 995431 Yes DETAIL SPECIFICATION AS GIVEN IN TENDER DOCUMENT 335 REMOVAL OF AC SHEET 31103- Square Meters 45 995432 Yes Removal of AC sheet from roof and stacking as directed by EIC 336 REMOVAL OF ST. STEEL 31103- Metric Ton 4999 995431 Yes Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc complete as directed by EIC. This works includes Dismantling and stacking in specified/Designated HPCL Scrap Yard within the Premises or as directed by EIC. 337 EXCAVATION IN RCC 31103- Cubic Meters 1773 995433 Yes EXCAVATION IN RCC OF ANY THICKNESS BY USING PNEUMATIC TOOLS LIKE JACK HAMMERS, CHISELS OR MANUALLY USING HAMMERS , CHISELS ETC CUTTING THE REINFORCEMENT STEEL AND STACKING THE SAME .THE JOB ALSO INCLUDES DISPOSING THE DISMANTLED RCC WITHIN/OUTSIDE HPCL PREMISES TO ANY UNOBJECTIONABLE PLACE ALL COMPLETE AS DIRECTED BY ENGG.-IN-CHARGE. 338 DIS. OF BRICK MASONARY 31103- Cubic Meters 1208 995459 Yes Dismantling of brick masonry/PCC /RR masonry including carting away debris 339 REMOVAL OF FALSE CEILING 31103- Square Meters 47 995431 Yes Dismantling of all types of ceilings except of bk work/CC, sheets like AC, TRAC, GYPSUM BOARD etc. Scope of job includes handing over of all 'J', 'L' hooks, nuts and bolts, suspendors or other joineries in proper bags. Party to ensure joint measurement of the job to be dismantled, alongwith EIC, before start. Payment shall be made basis the joint measurement, in absence of any joint measurement record HPCL EIC decision shall be final. 340 REMOVAL OF MS/AL DOORS 31103- Square Meters 140 995432 Yes Removal of MS/ Aluminium doors/ windows/fixed glazing and stacking as directed by EIC. 341 SHIFTING OF EB MAINS 31103- Lump Sum 15448 998719 Yes Shifting of EB Main, laisoning with EB officials, including payment of all incidental charges etc., all complete ( Payment made to EB shall be reimbursed to contractor by HPCL on submission of original receipt). 342 REMOVING OF ID 31103- Each 3143 998711 Yes SIGN/MASTERPOLE Removing of existing ID sign carefully without damage and shifting the same or refixing the same at new place within the primises as per HPCL instructions. Job includes making necessary electrical connecitons, etc., complete. 343 REMOVAL OF YARD LIGHT 31103- Each 2200 998719 Yes POLE Removing the existing yard light poles including removing of light fixtures carefully and delivery of the same at designated place within the premises. Job includes excavation, removal of RCC foundation, bolts, etc., complete in all respect. 344 REMOVAL OF FENCING 31103- Square Meters 187 995431 Yes Removing existing chainlink/barbed wire fencing including removing the grouted angles, rods etc., and stacking the same carefully as directed. 345 REMOVING OF MONO / DUEL 31103- Each 1158 998717 Yes PUMPS Removing exiting dispensing pumps after disconnecting pipeline, electrical connection etc, and stacking carefully as directed. 346 REMOVING OF MPD PUMPS 31103- Each 1697 998717 Yes Removing exiting dispensing pumps after disconnecting pipeline, electrical connection etc, and stacking carefully as directed. 347 RELAYING OF 40 MM DIA P/L 31103- Meters 369 995429 Yes Relaying of HPCL'S MS threaded pipeline to the required slope of alignment and hydrotesting with the pressure of 5 psi with providing and fixing necessary MS heavy duty fittings like elbows, tees, including providing and applying doping the pipeline with shalimastic HD 2 coats. Size 40mm dia 348 RELAYING OF 50 MM DIA P/L 31103- Meters 390 995429 Yes Relaying of hpcl'sMS threaded pipeline to the required slope of alignment and hydrotesting with the pressure of 5 psi with providing and fixing necessary MS heavy duty fittings like elbows, tees, including providing and applying doping the pipeline with shalimastic HD 2 coats size 50 mm Diameter 349 RELAYING OF 80 MM DIA P/L 31103- Meters 463 995429 Yes Relaying of HPCL'S MS threaded pipeline to the required slope of alignment and hydrotesting with the pressure of 5 psi with providing and fixing necessary MS heavy duty fittings like elbows, tees, including providing and applying doping the pipeline with shalimastic HD 2 coats. size 80 mm Diameter 350 FILL PIPE BRASS COUPLING 31103- Each 1115 995429 Yes Supplying & fixing 75 mm dia Brass coupling for fill point with required threads complete 351 INSTLN. OF AIR TOWER 31103- Each 1665 995414 Yes Installing Air Tower facility with necessary CC 1:2:4 foundation of required size incl. anchor bolts of required size and also with necessary electrical connection.( Cable & GI Pipe for the same will be paid seperately) 352 CABLE TRAY-300 MM WIDE 31103- Meters 537 995468 Yes Supply, erection/installation/mounting of 1.5 mm thk and 300 mm wide and 25 mm Height perforated GI cable tray inclusive of cable binding with suitable GI clamps, GI hooks, GI nuts and bolts complete in the tray in a neat way. The width specified shall be of cable mounting area. Bends at both the sides of cable tray shall be in addition to it. 353 CABLE TRAY-150 MM WIDE 31103- Meters 457 995423 Yes Supply, erection/installation/mounting of 1.5 mm thk and 150mm wide and 25 mm Height perforated GI cable tray inclusive of cable binding with suitable GI clamps, GI hooks, GI nuts and bolts complete in the tray in a neat way. The width specified shall be of cable mounting area. Bends at both the sides of cable tray shall be in addition to it. 354 GASKET ON TANK MANHOLE 31103- Square Meters 665 995468 Yes Gasket packing conforming to IS 2712 -1998 (Champion make) 355 HEAVYDUTY BRASS 31103- Each 1063 998739 Yes CROCODILE CLIP Supply and fixing of Heavy Duty HPCL approved Brass Crocodile clips at the end of each cable termination for connecting to the tank lorry during unloading . 356 FDN.BOLT FOR STRU. 31103- Kilograms 95 995468 Yes CANOPY Supply & fixing and embedding of Foundation Bolts of Size as specified ( M24 to M 32) conforming to IS 5624 made of MS conforming to IS 2062 incl. Nuts and lock nuts conforming to IS 1363 incl all labour & covering of the nuts safely with polythene as directed by EIC 357 BOREWELL- 6'' DIA 31103- Meters 282 995434 Yes Drilling of perfectly vertical bore hole of a diameter suitable to receive 150 mm nominal dia casing pipe up to desired depth below ground level i/c of the labour charge for transporting lowering and fixing of 150 mm dia meter MS/GI/UPVC casing pipe in side the bore hole i/c all work pertaining to drilling such as transportation installation and removal of drilling machine etc complete. In all type of collapsible strata consisting of soil clay sand moorum gravel boulder, rock etc. 358 S&F OF UPVC PIPE -6'' DIA 31103- Meters 1405 995434 Yes Supply and fixing of approved make UPVC casing pipe confirming to IS 4985/1988 with up to date amendments) casing pipes 150 mm dia 359 S&F OF SCREEN PIPE- 6'' DIA 31103- Meters 709 995424 Yes Supply and fixing of Screen pipe 150 dia with ribs 360 YEILD TEST 31103- Each 1386 995424 Yes Conducting the yield test or development of tube well by operating the pumping set continuously for a desired time period and measuring the discharge and draw down of tube well at a suitable time interval as per the direction of Engineer in charge i/c cost of energy cost of installation of suitable measuring device and the charges of pumping set etc. complete. 361 S&F SUBMERCIBLE PUMP-2 31103- Each 17328 995434 Yes HP Supply and Providing, testing, commissioning of and giving test of 100 mm dia submersible pump set of 2 HP confirming to IS 8034 and mortor confirming to IS 9283 of approved make alongwith dry run preventor and starter 362 WELL CAP-150 MM DIA 31103- Each 576 995462 Yes Providing / fixing well cap MS cap. 150 mm dia.complete with labour 363 S&F OF 40 MM DIA HDPE PIPE 31103- Meters 77 995424 Yes Supply and installation of 40 mm NB HDPE pipe with GI nipple at both ends complete with labour. 364 3 C X 2.5 COPPER FLAT CABLE 31103- Meters 121 995423 Yes Supply and laying 3 C X 2.5 sqmm copper flat cable incl. termination, labour etc complete 365 SINGLE PHASE 1.5 HP JET 31103- Each 8519 995434 Yes PUMP Supply and installation , testing, commissioining of single phase 1.5 HP jet pump of approved make with starter of approved make 366 25 MM NB HDPE PIPE 31103- Meters 56 995424 Yes Supply and installation of 25 mm NB HDPE pipe with GI nipple at both ends. Complete with labour. 367 GEOLOGICALTESTING FOR 31103- Each 3435 995432 Yes BOREWELL Carrying out geological testing for finalisation of location of borewell by geologist and submission of the report 368 S/L DRIVEWAY GREY PAVER 31103- Square Meters 1025 995421 Yes M-40 Supply and laying of 80mm thick grey pavers in line and level and approved pattern and shape, as per attached specifications. The job includes supplying and laying sand bedding, compacting using plate vibrator, all material and labour complete. Pavers will be laid in specified pattern. Plan of laying will be developed by the contractor and prior approval of EIC will be taken before commencement of laying. The pavers supplied should qualify min comp. strength of 47.2MPa and should conform to IS:15658:2006. The party shall have to produce manufacturer's certification on the paver qualifying criteria stated in IS-15658 and limits specified in the attached specification before the pavers are sited. HPCL reserves the right to do random sampling and testing as per IS-15658:2006 to assess manufacturer's certification on qualifying norms specified in the attached specification. The testing charges, if samples qualify, shall be borne by HPCL, else shall be borne by the party.(Refer attached Drawing) 369 S/L DR.WAY COLOUR PAVER 31103- Square Meters 1065 995421 Yes M-40 Supply and laying of 80mm thick grey pavers in line and level and approved pattern and shape, as per attached specifications. The job includes supplying and laying sand bedding, compacting using plate vibrator, all material and labour complete. Pavers will be laid in specified pattern. Plan of laying will be developed by the contractor and prior approval of EIC will be taken before commencement of laying. The pavers supplied should qualify min comp. strength of 47.2MPa and should conform to IS:15658:2006. The party shall have to produce manufacturer's certification on the paver qualifying criteria stated in IS-15658 and limits specified in the attached specification before the pavers are sited. HPCL reserves the right to do random sampling and testing as per IS-15658:2006 to assess manufacturer's certification on qualifying norms specified in the attached specification. The testing charges, if samples qualify, shall be borne by HPCL, else shall be borne by the party.coloured paver(Refer attached Drawing) 370 PIPE,HDPE,2IN 31103- Meters 2513 Yes PIPE,NON-METALLIC; TYPE:NON CONDUCTIVE, FLEXIBLE; MATERIAL SPEC:N/A; MATERIAL:HIGH DENSITY POLYETHYLENE; PRESSURE RATING:MORE THAN 8 KG/SQ.CM; WALL THICKNESS:N/A; DIAMETER,OD:N/A; SIZE (NB):2 IN; S SIZE; PIPE SPECIFICATIONS:A) PIPE SHOULD BE DESIGNED AS PER UL 971:2004/EN 14125B) PIPE SHOULD BE SEMI RIGID AND SINGLE WALLED BUT DOUBLE LAYERED.C) IT SHOULD WITHSTAND HYDROSTATIC/PNEUMATIC PRESSURE.D) PIPE SHOULD HAVE NEAR ZERO PERMEABILITY (WATER INTRUSION FREE AND LEAK FREE)E) UNDERGROUND PIPING SHOULD HAVE HIGH RESISTANCE TO ABRASION AND HIGH RESISTANCE TO LONG TERM PRESSURE AS WELL AS HIGH RESISTANCE AT LOWER TEMPERATURE.F) PIPING SHOULD HAVE EXCELLENT CHEMICAL RESISTANCE TO CORROSION AS WELL AS ABRASION RESISTANCEPROPERTIES.G) PIPING HAS THE ADVANTAGE OF LOW FRICTION COEFFICIENT, LIGHT WEIGHT AND EASE OF INSTALLATION. IT IS SAFE TO USE, ALLOWS NO HAZARDOUS VOLTAGE AND NO CHEMICAL CORROSION.H) IT SHOULD BE NON-CONDUCTIVE/CONDUCTIVE AND APPROVED BY PESOI) PIPE SHOULD BE FIT FOR USE AS DIRECTLY BURIED PIPE.THE SCOPE INCLUDES SUPPLY INCLUDING TRANSPORTATION UP TO RESPECTIVE SITE, LOADING AT BIDDERS PLACE AND UNLOADING AT THE SITES, LAYING, TESTING OF PIPE ALONG WITH REQUIRED PIPE FITTINGS VIZ ELBOW, FEMALE ADAPTOR, STRAIGHT COUPLER, TEE ETC. AT RETAIL OUTLETS UNDER THIS ZONAL/REGIONAL OFFICE. THE PIPE SHOULD BE COMPATIBLE FOR DISPENSING HIGH SPEED DIESEL (HSD), MOTOR SPIRIT (MS) AND ETHANOL BLENDED MS. 371 PIPE,HDPE,50MM 31103- Meters 2513 Yes PIPE,NON-METALLIC; TYPE:CONDUCTIVE; MATERIAL SPEC:N/A; MATERIAL:HIGH DENSITY POLYETHYLENE; PRESSURE RATING:N/A; WALL THICKNESS:N/A; DIAMETER,OD:N/A; SIZE (NB):50 MM; INCLUDING FITTINGS AND JOINTS AS PER STANDARD EN 141125