PURCHASE OF LABORATORY AND FIELD EQUIPMENTS FOR RESEARCH PURPOSE

Detail Specifications for the purchase of following items (Note: Service tax / GST or any other tax, if applicable, will be liable to supplier / firm)

Details and Specifications for the purchase of Plant Canopy Analyzer: 1. System should work for any size canopy (crops, grasses, horticulture trees), should have Built-in GPS. 2. Memory: 128 MB or more for data storage (Must have capacity to store more than 1 lakh data) 3. Operating range: 10 to 50 °C: 0 – 95% RH. 4. Ractile response keypad 5. Data recording: Must give rapid result, should measure leaf area index (LAI) non-destructively, automatic/ manual data logging. 6. System: should calculate and display instantaneous LAI, should able to measure LAI/ canopy cover at any time during day time, and should measures light from multiple zenith angles. System should also give real time data of PAR. 7. Correction Scattering effects, transmittance or reflectance that affect readings should be corrected by system/ software. 8. Communications: USB (as mass storage device); RS-232. 9. Power: Sufficient to whole day recording without interrupt. 10. Onsite warranty should be minimum one year.

Details and Specifications for the purchase of Infra-red Thermometer: 1. Temperature range should be 76 to +1832°F (-60 to +1000°C). 2. Accuracy of infrared should be IR: ±1.0°C (1.8°F) from 59 to 149°F (15 to 35°C) or better. 3. Resolution : 0.1 °C or better 4. Measurement unit should be switchable°F to °C. 5. Response: (90-95%) 1 second. 6. Distance/Target: 50:1 (1" target diameter at 50" distance); Dual laser shows target size. 7. Environmental Range: 32 to +122°F (0 to +50°C). 8. Probe: Standard Mini Socket, Type K, 12 minutes to auto Power Off. 9. Mode: Max Min, Dif, Ave, Lock, Hi/Low Temp Alarm. 10. Data Storage and Data Logging in real time (Up to 1000 data points or more) 11. RS232/USB Output with Free Windows based Data Logging PC application 12. Onsite warranty should be minimum one year.

Details and Specifications for the purchase of Chlorophyll Content Meter: 1. Chlorophyll Index values ranging from 0 - 99.9. 2. Measurement method: Optical density difference at two wavelengths 650 nm and 940 nm. 3. Measurement area: 2 mm×3 mm or better. 4. Light source: 2 LED elements. 5. Receptor: 1 SPD (silicon photodiode). 6. Display: LCD panel showing 4-digit measurement value (values shown to first decimal place) and 2-digit number of measurements. 7. Display range: 0 to 99.9 units . 8. Memory function: Memory capacity for up to 30 values; Calculation/display of average of data in memory also possible. 9. Power source: 2 AA-size alkaline batteries. 10. Battery life: More than 20,000 measurements. 11. Minimum interval between measurements: Approx. 2 seconds. 12. Accuracy: Within ±1.0 units or better (for value between 0.0 and 50.0 under normal temperature/humidity). 13. Repeatability: Within ±0.3 units. 14. Onsite warranty should be minimum one year.

Details and Specifications for the purchase of Chlorophyll Fluorescence Meter: 1. Hand held battery operated system for photochemical efficiency measurement (Fv/Fm) and OJIP analysis. 2. Operating range: 10 to 50 °C: 0 – 95% RH 3. Measured parameters: F0, Fm, Fv/Fm, Fv/Fo, O, K, J, I, P, tFm, A, Mo PI/ABS and other relevant parameters. 4. Sampling rate: Variable from 10µS to seconds. 5. Storage capacity: 150,000-200,000 data sets. 6. Detection system: Pulse excitation detection with high resolution sampling mode for Kautsky induction curve recording. 7. Fiber Optic inbuilt fiber optic probe. Easy to use. 8. Leaf Clips - Clips (30) should be provided with the instrument. 9. Display -LCD Graphical Display. 10. Onsite warranty should be minimum one year.

Spectra Agritec

VS INSTRUMENT PVT LTD

ULTRASMART TECHNOLOGIES

CHENKEM

MeaTech Solutions LLP

Spectra Agritec

CHENKEM