REPAIR TO BOUNDARY WALL, FENCING, DRAINS, GARBAGE BINS, CULVERTS, KERBSTONE, HARDSTANDING, PATH/PAVEMENT, CULVERT AND DRAIN IN CITY AREA UNDER AGE B/R-I AT ALWAR

Amount

Demolition of cement concrete (un-reinforced) in ground floor and paving. n.exc 15 cm thickness (below or above ground level.) & removal of rubbish material complete all as specified& directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving. exc. 15 cm thickness above ground level & removal of rubbish material complete all as specified & directed.

M&L 100mm thick PCC, 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base of path /hardstanding/ flooring complete all as specified & directed.

M&L 60mm thick machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size confirming to IS 15658-2006, M-35 Grade and over with and including 25mm thick sand cushion complete all as specified and as directed.

M&L 60mm thick machine pressed precast concrete rubberised moulded colourful interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 , M-35 Grade and over 25mm thick sand complete all as specified and as directed.

M&L 80mm thick machine pressed precast concrete rubberised moulded interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658-2006, M-40 grade and over with and including 25mm thick sand cushion complete all as specified and as directed.

M&L rubber moulded coloured chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with gray pigment cement and pigment with and including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and directed.

M&L 40mm thick PCC 1:2:4, type B1, (using 20mm graded stone aggregate) as in flooring complete all as specified & directed.

M&L 75mm thick PCC 1:2:4, type B2, (using 20mm graded aggregate) as in flooring complete all as specified & directed.

S&F plastic dividing strips, 1.5mm thick and 38mm width inserting in position conform to position complete all as specified.

M&L 75mm thick PCC(1:3:6) type C1 (using 20mm graded stone aggregate ) as in plinth protection including forming groove 10mm wide & 30mm deep & filled with bitumenious filler at intermediate span n.exc 5m without using extra cement complete all as specified & directed.

Dismanlting of kerb stone including cement bedding & removed off rubble complete all as specifed and directed.

M&L PCC type D2 1:4:8 (40mm graded stone aggregate) as in foundations, filling and mass-concrete complete all as specified & directed.

M&L providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specifed and directed.

M&L 25mm thick cement concrete 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate) as in levelling coarse for tiles.

M&L 18-20mm thick machine cut kota stone slab flooring over with and including 20mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified& directed.

M&L prepration of new or previosly untreared concrete surface of any description, not otherwise descri-bed, over 10cm width or girth priming with zinc chrome primer and applying synthetic enamel paint two coats complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls etc.

M&L rendering 15mm thick in CM 1:4 on brick/stone wall surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cement with water proof compound all as specified.

M&L rendering 15mm thick in cement mortar 1:6 on fair faces of brick/stone masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified.

M&L rough cast plaster on exterior walls applying the under coat of cement and sand morrtar 1:3 not less than 10mm thick and while it is still in plastic state the roughcast mixture consisting of crushed stone or fine gravel aggregate (size between 6 to 12mm ) mixed with coarse aggregate, sand and cement in the ratio of 1:1:1 shall be applied and finished even. The mix of cement and sand shall made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered complete all as specified and directed.

M&L preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of primer of approved shade/tint complete all as specified& directed.

M&L preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified.

M&L preparation of new plastered surfaces of walls and applying two coats of Oil bound distemper over a coat primer of approved tint complete all as specified & directed

Demolition of brick/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified& directed

M&L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L brick work with FLY ASH BRICKS {As per IS-13757 (1993) burnt clay fly ash building bricks}, (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed.

M&L walling of random rubble,bedded and solidely hearted Uncoursed built in CM (1:6) complete all as specified and directed.

All as per item No 28.00 above but except stone complete all as specified and directed. Note:- Old serviceable stone obtain from Srl item No. 25 shall be used.

Extra over stone walling for hammer dressed to face stores and dressing of face beds and joints as specified of random rubble walling uncoursed or brought upto course with maximum deprssion on face from straight adge held against the depressed surface on lime or sand stone not exc 20mm for rock faced.

M&L providing cement concrete 1:2:4 type B-1 concrete, using 20mm graded stone aggregate as in water troughs, surface channels of drains and manhole benching including finishing the top of benching even and smooth using extra cement complete all as directed.

M&L plain cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) set in cement mortar 1:6 as in coping of brick masonry wall kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin) corbels, brackets, etc. including weathering slightly rounded or chamfered angles and throating including necessary formwork complete all as specified& directed.

M&L providing precast cement concrete louvres and jallies, 25mm thick, type B-0, 1:2:4, (using 12.5mm stone agreegate) (measured solid), including all mouldings but excluding frame set in cement mortar 1:4 complete all as specified& directed

S&F in repair PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors /wall complete all as specifed and directed.

Demolition of reinforced cement concrete as in drain cover slab, culverts, chullah hood and the likes all a specified & directed.

S&F 50mm thick steel fibre reinforced concrete (SFRC) drain/manhole cover with iron frames (medium) complying to the standard specifications as mentioned in the IS 12592 BIS Standard minimum load bearing capacity 3 ton /Sqm in square rectangular or Circular shape complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete,brick work, masonary etc. any section, including taking out embedded portion and making good disturbed ground complete all as specifed and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Excavating in post holes (or similar) each n. exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm as in soft/loose soil complete all as specifed and directed.

M&L cement concrete type C-2, 1:3:6 ( 40mm graded stone aggregate) in foundation filling mass concrete for post holes etc complete all as specified and directed.

S&F mild steel joist angle channel or tee sections and fix independently in concrete as fencing posts and similar work confirming to Fe 410 or Fe -310-0 complete all as specifed and directed.

S&F mild steel bolt purpose made with hexagonal or square head one end screwed the other end or screwed both ends each screwed to be fuitte3d with washer and one hexagonal or square nuts exceeding 50mm and n exc 75 mm long dia of the shank 16 mm complete all as specifed and directed.

Fixing only chain link fencing including line wire any mesh size and type to any type of standards rails, straining bolts etc inlcluding provision of binding wire complete all as specifed and directed.

Supply only chain link MS galvanised fencing of size of mesh as approved by Engineer-in-Charge complete all as specifed and directed.

S&F mild steel MS round bar 10mm dia and over cut to length bent to shape required including cranking bending hooking etc and binding with MS wire 0.9 mm dia (annealed) as in straightening bars of fencings complete all as specifed and directed.

S&F in repair galvanised 2 strand, steel barbed wire 2.24mm dia barbed fixed in repair with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured).

S&F in repair galvanised steel punched tape concertina coil of 600mm dia (dia of coil when unstretched) and length of each coil 6 m after streching and fixed to angle iron post/strusts with 3.15mm dia GI wire complete all as specifed and directed.

Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.

Preparation of new steel surfaces of any description Surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as directed.

S&F framed work such as iron doors or gates grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc conforming to Fe-290 complete all as directed.

M&LTMT bar 10mm dia and over up to and including 10mm dia cutting , bending and binding with MS wire annealed not less than 0.90mm dia complete all as specifed and directed.

M&L reinforced cement concrete M-25 (20mm graded aggregate) nominal mix for Culvert, Chullah hoods; stairways (except spiral staircases) including steps (square or spandril), string pieces, carriages, lintel bends etc., complete, any section straight or winding complete all as specified and directed.

S&F form work flat to culvert, chullah hoods, chajjas, lintel, troughs and similar items including edges etc complete all as specified and directed.

S&F form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.

S&F 300mm dia reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

Dismantling asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings complete all as specified & directed

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified & directed

Dismantling of wrought iron or mild steel work of any description not otherwise provided for in this Schedule all as specified & directed.

S&F MS steel work as in angles/tubular trusses and tubular posts, purline, rafter including special shaped washers etc., complete using but welded. RHS/SHS confirming to IS 4923 : 1997 with one shop coat of zinc chromate primer paint.

M&L plates (plain or chequered) channels square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 W (Gde E-250) Quality B ,complete all as specified & directed.

Dismantling framed timber scantlings 40 Sqcm and over in section, in any position complete all as Specified.

J.J.ENGINEERING

shiva construction

GAR CONSTRUCTIONS

M/s ASK Enterprises

Hitesh Construction

M/s S Amarjit Singh