Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.8 CrAccepted-AOC 86 SECTOR 07 URBAN ESTATE KURUKSHETRA | ₹22.8 Cr | L1 | Accepted-AOC Being L1 bidder |
| 2 | L2₹23.8 CrRejected-Finance | ₹23.8 Cr | L2 | Rejected-Finance Being L2 bidder |
Tender Value
Refer Docs
EMD Value
₹38.7 L
Closing Date
21 Mar 2022, 5:00 pmClosed
DGM
Faridabad Smart City Limited 3rd Floor, Nain Sadan Building Plot No. 35, 20A, Faridabad
CONSTRUCTION OF COMMERCIAL COMPLEX ON AMBEDKAR ROAD AT OLD SABZI MANDI WITH DEFECT LIABILITY PERIOD OF TWO YEAR INCLUDING OPERATION AND MAINTENANCE OF FIVE YEARS SMART CITY MISSION
2022_HRY_209652_1
FSCL/2022/319
Open Tender
Civil Works
365 days
Faridabad
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
₹38.7 L
Yes
FSCL Office
22 Apr 2022
25 Feb 2022
22 Mar 2022
25 Feb 2022
21 Mar 2022
1 Mar 2022
28 Feb 2022
Amount
SANITARYWARE & FITTINGS
Providing and fixing Hand shower (health faucet) with 8mm dia. 1m long flexible tube having wall hook with approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge.
Supplying and fixing of UPVC WC connector (straight or bend type) with rubber lip ring. Including 110 mm dia UPVC pipe of required length and proper connection complete as required.
Supplying & Fixing in position 100 mm dia UPVC Multi traps of self cleaning design including 125 mm dia brass C.P. grating, jointing, embedding in concrete etc. complete. Rate to include making of opening in floor, marble / tiles, for fixing C.P gratings ( suitable for pipes).
Supplying and fixing of in position Urinal partition of white glazed vitreous china including cutting and making good the wall where required, including brackets, complete. as per specification and directed by Engineer in char
Supplying and fixing of fully automatic ss "No Touch" Hand drier suitable to operate on 230 volts, single phase 50 Hz, A.C. power supply and directly plugged to power point complete.
Transfer Pump
Supply, installation, testing & commissioning of submersible pumps ( 1 working + 1 standby) with C.I body with built in strainer & SS 304 impeller, coupled to motor suitable for operation on 430 V 3 pH 50 Cycle A/C power supply and lifting arrangement including complete as required.Automatic Electric control panel with sequential change over switch,Ammeter, voltmeter, over load/under load protection with indicator lamp, single phase preventor, relays, electrical wiring, cabling from panel to pumps, level controller complete with all accessories as per manufacturer specifications.Accessories like NRV's valves on discharge and valve and strainer in suction line, header for suction and delivery side, required cut pieces of pipes, fittings, flanges, pressure gauge, base frame and concrete foundation complete as required.--Flow rate : 200 LPM (1 Working +1 Standby)--Head : 40 Mts--Purpose : Water Transfer from UGT to OHT--Location : Underground Tank.
Transfer Pump
Supply, installation, testing & commissioning of submersible pumps ( 1 working + 1 standby) with . C.I body with built in strainer & SS 304 impeller, coupled to motor suitable for operation on 430 V 3 pH 50 Cycle A/C power supply and lifting arrangement including complete as required.Automatic Electric control panel with sequential change over switch,Ammeter, voltmeter, over load/under load protection with indicator lamp, single phase preventor, relays, electrical wiring, cabling from panel to pumps, level controller complete with all accessories as per manufacturer specifications.Accessories like NRV's valves on discharge and valve and strainer in suction line, header for suction and delivery side, required cut pieces of pipes, fittings, flanges, pressure gauge, base frame and concrete foundation complete as required.Flow rate : 200 LPM (1 Working +1 Standby)--Head : 40 Mts--Purpose : Water Transfer from UGT to OHT (Flusing Tank)--Location : Underground Tank (Flushing tank)
Sump pump 150 lpm 20 m head Flow rate : 150 LPM (1 Working +1 Standby) Head : 20 Mts Purpose : Sump pump
Rain water harvesting tank Flow rate : 150 LPM (1 Working ) Head : 40 Mtr Purpose : Water transfer Location : Rain water harvesting tank
Constructing brick masonry Catch basin internal dimensions 600x600mm, (clear inside dimension) for pipeline with three or more inlets, using table moulded non-modular bricks of class designation 50 in cement mortar 1•5, C. I cover with frame (Heavy duty)total weight of cover with frame to be not less than 125 kg R.C.C. top slab with cement concrete M 15 with 20mm and downsize granite metal , foundation concrete M 5 with 40mm and downsize granite metal inside plastering 12mm thick with cement mortar 1:3, finished smooth with a floating coat of cement on walls and bed concrete complete as per standard design including cost of materials, labour charges, curing complete as per specifications.(Depth up to 600- 1500 mm)
ELECTRICAL WORK
Distribution Board
Supply and eraction of Isolators 240/15 Volt in the existing distribution board including making necessary connections
Providing & erecting prewired meter module suitable for MCCB panel board
LT CABLES
Supplying of 1.1 kV LT UG cable having aluminium conductor PVC insulated, extruded inner sheathes, galvanized, steed strip (except 2Cx10Sq.mm wire armoured) confirming to IS 3975:1990 (No. of strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 & confirming to GTP of GROUP A
3.5 core 300 sq.mm
3.5 core 240 sq.mm
3.5 core 150sq.mm
3.5 core 120sq.mm
3.5 core 95sq.mm
3.5 core 70sq.mm
3.5 core 50sq.mm
3.5 core 35sq.mm
3 core 35sq.mm
Supplying, Layning, erecting & terminating of 1.1 kV LT UG cable having copper conductor PVC insulated, extruded inner sheathes, galvanized, steed strip (except 2Cx10Sq.mm wire armoured) confirming to IS 3975:1990 (No. of strip indicated in GTP) & extruded PVC outer sheathed armoured cable with specified IS-1554 Part-1:1988 & confirming to GTP of GROUP A
4 core 16sq.mm
4 core 10sq.mm
4 core 6sq.mm
4 core 4sq.mm
3 core 4sq.mm
Cable Laying
Laying of PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering
3.5 core 300sq.mm
3.5 core 240sq.mm
3.5 core 150sq.mm
3.5 core 120sq.mm
3.5 core 95sq.mm
3.5 core 70sq.mm
3.5 core 50sq.mm
3.5 core 35sq.mm
3 core 35sq.mm
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required
3½ X 300 sq. mm (70mm)
3½ X 240 sq. mm (62mm)
3½ X 150 sq. mm (50mm)
3½ X 95 sq. mm (45mm)
3½ X 95 sq. mm (45mm)
3½ X 70 sq. mm (38mm)
3½ X 50 sq. mm (35mm)
3½ X 35 sq. mm (32mm)
Conduit
Supplying of recess mounting non integral type ........ LED w luminaire comprising of pressure decast/extruded aluminium housing, with spring loaded false ceiling clamps, Power LEDs with CCT 6500 degree K, CRI> 70%. efficacy > 100 lumen per watt, 120degree beam spread, life> 25000 burning hours and Compliance to IS 10322/IEC 60598, LM 79 & LM 80. The lamp compartment is enclosed with anti glare opal diffuser which enhances the lighting level LEDs are driven by HF electronic driver integrated in a separate control gear assembly., with PF > 0.95, power loss should< 5% of lamp wattage., short circuit & open circuit protection to be integrated in the circuit, THD less than 20%, Life as per LM 79. The operating input voltage should be between 130 to 275 volts. BIS Approved and Tested by NABL/CPRI accredited laboratory with 2 years Warranty against any manufacturing defect working under standard electrical condition.LED modular down light 2'x2' /1' X 4' 34 -36watt
Supply of round/square recess/surface mounted rolling type LED Down light with ...... W GU 10 LED Lamp Rib Fabricated from diecast aluminium with white powder coated prewired to mains connector & has swivelling unit of aluminium die cast eye ball & LED Lamp position retained by circular wire spring, with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V @50/60Hz & Power factor >0.9 along with CE approved. 2years Warranty against any manufacturing defect working under standard electrical condition LED square or round down light 10-12W
Supplying of .....feet -PVC Batten with integrated LED tube .... W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI > 80. Power Input: 220-240V@ 50/60Hz & Power factor >0.9 along with CE approved. 2 years Warranty against any manufacturing defect working under standard electrical condition.
LED light fitting 1 x 4'- 20/22 w
LED light fitting 1 x 2' - 9/10W
Online Uninterruptible Power Supply (UPS)
Supplying & erecting on line UPS pure sine wave of ...kVA capacity complete with standard features, along with necessary SMF batteries for 30 mins battery backup 15kVA
ELECTRICAL LT PANELS
ELECTRICAL LT PANELS --Design, Manufacture, Supplying, Preparation and getting approval on General arrangement drawings from consultants office, Transport to the site, Loading and unloading at site, installation, testing & commissioning of the following Modular cubical type construction, Electrical Panels up to 500Volts ±5%, 3Phase, 4Wire, 50Hz ±5%, are housed in CRCA Sheet of 1.6mm for non-stress members & 2.0mm for all stress bearing members and 3.0mm for Removable Glad Plate & base Frame Materiel, unless specified otherwise, vermin proof hinged lockable doors & door earthed for each compartment provide bus bar interconnections for incoming and outgoing, fixed Type, Single front compartmentalized, totally enclosed, free standing, Floor / Wall mounted type, indoor (IP:52) / outdoor (IP:65) , extendable type, dust and vermin Proof, duly wired up and ready for installation at site. The Bus bars will be as per the IEC 6068-3-247 Standard.Also, refer to General Notes and Specifications for Panels/ Boards.All Switchgear makes shall be from approved List of makes.Only one make of switchgear to be used in a board / Panel.All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The busbars insulation shall be with heat shrinkable sleeves. SMC shrouds busbar supports shall be used.Minimum Air Clearances between bus bars;P-P=25mm, P-N=20mm,P-E=20mm and N-E=20mm--Also, refer to General Notes and Specifications for Panels/ Boards./MCCM's/MCB's/SLD--Minimum Air Clearances between bus bars;--P-P=25mm, P-N=20mm,P-E=20mm and N-E=20mm.Main LT Panel- refr. SLD
DG SYNC PANEL - Supplying, erecting, testing and commissioning of Microprocessor based generator control unit (synchronization cum AMF panel) panel with contactor & MCCB of suitable rating suitable for diesel generating set of 1000 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features and safeties etc as per specification no. GEN-SYNC.
Ground Floor HVAC Panel--INCOMER-- TPN MCCB with CT's,indication Lamps etc. --BUSBARS SECTIONS-100 amps TPN, 25kA, 430volts grade busbar chamber of suitable length with Al busbars. All busbars and interconnections shall be of suitable size Al busbar, current density of bus-bars shall not be more than 0.8 Amps/ sq.mm cross sectional area of Bus Bar.---OUTGOING SECTION--all the rating & quantity of incomer and out going are as per SLD
Supplying, installing by suspension on ceiling, testing and commissioning of following capacity Sandwich Type Rising Mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with metal clad enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos aluminium bus bars having current density of 130 A/ sq cm at nominal current rating, necessary joints, elbow joints & expansion joints and bends, fire barrier at each floor, provision of tapping at every metre, adopter box and copper flexible for joints, continuous earthing with 2 Nos aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, suspenders, angle iron bracket, steel fasteners, connecting to earthing system etc. as required 1600 A 50kA SC for 1 sec
Supplying, installing, testing and commissioning of following capacity TPN tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with TPN disconnector MCCB, connections, earthing etc. as required. 400 A TPN
Supplying, installing, testing and commissioning of following capacity TPN distribution tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with HRC fuses, interconnections, earthing etc. as required.
32 A TPN, 8 way
63 A TPN, 8 way
16 A TPN, 6 way
First/Second/Third/Fourth Floor Panel HVAC Panel--INCOMER--1 N0.TPN MCCB with CT's,indication Lamps etc. --BUSBARS SECTIONS-100 amps TPN, 25kA, 430volts grade busbar chamber of suitable length with Al busbars. All busbars and interconnections shall be of suitable size Al busbar, current density of bus-bars shall not be more than 0.8 Amps/ sq.mm cross sectional area of Bus Bar.---OUTGOING SECTION-. Refr SLD
Common Services Panel--INCOMER--1 Nos.TPN MCCB with Interlocking with CT's,indication Lamps etc--BUSBARS SECTIONS--100 amps TPN, 10kA, 430volts grade busbar chamber of suitable length with Al busbars. All busbars and interconnections shall be of suitable size Al busbar, current density of bus-bars shall not be more than 0.8 Amps/ sq.mm cross sectional area of Bus Bar.--OUTGOING SECTION-- Refer SLD
Plumbing Panel-INCOMER--1 Nos. TPN MCB --BUSBARS SECTIONS--60 amps TPN, 10kA, 430volts grade busbar chamber of suitable length with Al busbars. All busbars and interconnections shall be of suitable size Al busbar, current density of bus-bars shall not be more than 0.8 Amps/ sq.mm cross sectional area of Bus Bar.---OUTGOING SECTION-. Rfer SLD
Supplying and erecting 350 kVAr, 440 V three phase, 50 Hz., thyrister switched micro APFC passive filter panel, consisting of suitable steps of APP type capacitor units with harmonic filter reactors, as per specification no CP-ED/APFC
Cable Tray
Providing & erecting Hot dipped galvanized ladder type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 300 mm width & 100 mm height comprising all required standard accessories.
Cable Tray Cover
Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 300 mm width & 20 mm height complete with necessary hardware in approved manner.
Providing & erecting Hot dipped galvanized cover suitable for perforated type cable tray manufactured from 18 swg (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware in approved manner.
Raceways & Accessories
Supply and installation of single or multi compartment GI raceway of cross section given below laid in floor complete as specified.(a) Raceway (b) All bends, joints, supports, end plates couplers earth conductivity.
300 x 50 Double compartment
150 x 50 Single compartment
Providing and fixing of 2 mm thick pregalvanised sheet outlet junction box including providing cover with provision to adjust overall height, knock outs on four sides to accept raceways of specified sizes and cutouts to fix required outlets for following size of race ways.
450 mm wide x 40 mm deep raceway with 3/2/1 compatments
200 mm wide x 40 mm deep single compatment raceway
EARTHING SYSTEM AND LIGHTNING PROTECTION SYSTEM
Excavation earth pit 180cm round at top and 90cm at bottom 4.5m deep and refilling the same in hills incliding supply of necessary charcoal/coke and salt mixture.
Maintenance free gel earthing with pipe in pipe /Strip in Pipe technology filled with anti corrosive conductive compound (CPRI tested) below the ground in 150 -200 mm dia earth pit and surrounding filled with required mineral filling compound (MFC should have hygroscopic properity to retain the moisture for long time to create low resistance Zone) and C.C. finished chamber covered with hinge type with locking arrangement C.I cover. C.I. frame of size 300mm x300mm complete testing of earth resistance as required of following sizes With pipe in pipe technology (inner pipe dia / outer pipe dia) 80 -100 micron G.I. coating With pipe in pipe technology with 80-100 micron G.I. coating.
Supply & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required.
8 SWG copper Wire
25mm x 3mm G.I. Strip
25mm x 6mm G.I. Strip
32mm x 6mm copper strip
Supply and erection of 25mm diameter 1.5 meter long lightning solid GI rod tapered into a point at the top with 16cmx16cmx3mm thick copper base plate and necessary nuts and bolts with washer.
Supply and installation of Test link box for down conductor of size 25x6mm G.I strip
HT Work
Providing & Laying XLPE insulated IS:7098/II/85 of approved make H.T.cable for working voltage 11K.V.Earthed with Stranded Compacted Circular Aluminium Conductor, Conductor Screened with Extruded Semi-conducting compound, XLPE Insulated, Insulation Screened with extruded semi-conducting compound in combination with Copper Tape, cores laid up, inner sheath of Thermoplastic tape, galvanised flat steel strip armoured and overall Extruded PVC Type ST-2. Outer Sheathed cable direct in ground including excavation of 30cmx100cm size trench, 25cm layer of river sand, second Class bricks covering, refilling earth, 3 core 185.0 Sq.mm
Providing & making heat shrinkable type indoor/outdoor/straight through terminations/joint kit of approved make suitable for XLPE insulated 11 KV cable, with required components, prepration of cable ends, testing etc. as required of following sizes.
Indoor
3 core 95/120/150/185 Sq.mm
Outdoor
3 core 95/120/150/185 Sq.mm
Tranformer
Supply, Installation, Testing and commissioning of 990/1000 KVA, 3 phase 11KV/433-250Volt oil immerse, naturally cooled copper wound out door typy distribution transformer as per latest DHBVN technical specfication with amandment revelent IS with latest amandement including cable box etc. complete al respect.
DG Set
SITC of DG Set complete with 1500 RPM Diesel Engine of suitable BHP & AC Brush less SPDP Alternator mounted on a common base Frame & coupled through a flexible coupling or close coupled.Alternator shall be self regulated with standard Alternator Protection( Over voltage, over speed & under voltage). Engine shall have residential silencer, up to 10 M exhaust piping , electronic / Mechanical governor, Manual & electric Start, Batteries, Fuel tank ( with Stand) & piping, control panel (16 G) with MCCB (4P; 25 KA), Ammeter, Voltmeter, Frequency Meter, Energy Meter & Hour Meter, Engine instruments panel, AVM and with Weatherproof, powder coated Accoustic enclosure for DG set for sound attenuation fabricated from 1.6 mm CRCA sheet steel (structure) with side wallfabricated from 1.6 mm CRCA sheet and filled with foam as per CPCB norms latest amendments & IS 8183 .The doors are fabricated from 1.6 mm CRCA sheet packed with accoustic material,floor of MS chequrred plate 5.0 mmthick, All doors/ opening are sealed with neoprene/ EPDN gaskets. The enclosure has built in fuel tank, residential silencer (isolated from main DG chamber) with protection and tripping of DG set against temperature of more than 50 °C. All controls for operation of DG set are from outside the enclosure with DG control panel having microprocessor based genset monitoring and control system mccb Ammeter, voltmeter, Pf meter, frequency meter, KWH meter, Ind. Lamps etc. mounted inside enclosure , visible and accessible from outside. The enclosure should be suitable for following capacity DG sets and alternator.Noise level is less than 75 db (A) at a distance of 1 Mtrs. duly certified by authorized agency. Complete in all respect of following capacity. Radiator cooled and turbo charged. 1000 KVA at 0.8 pf 415V 50Hz 3-Ø.
CONDUITING AND CABLING FOR DATA SYSTEM
This schedule of Quantities shall be read in conjuction with the technical specification, General & Special conditions as well as all tender drawings.Providing and installing of all conduiting and structured cabling for Data sysem including providing and fixcing of the following. All necessary specials and fittings.Approved cover plates for inspection, junction and outlet boxes. 2 mm thick outlet boxes and junction boxes.All fixing accessories such as clips, nails, screws etc.Providing and fixing approved saddles, hooks and grouting the same as required, in the case of all exposed conduit work.Embedding conduits and accesssories in wall, floors etc. during construction and / or cutting chases and making good as necessary in the case of all concealed conduit work.
Supply, installation, testing and commissioning of 4 pair Category 6 cable consisting of 23 AWG solid copper conductors and as per the specification. The cable shall have flexible jacket and ripcord for easy Stripability
Supply, installation, testing and commissioning of 6 pair fibre optic armoured cable as per the specification.
Supply and installation of flush mounted Enhanced Category 6 T 568 A or B) outlet. The plastic shall be high impact, flame-retardant, UL rate thermoplastic. Dust cover / blank shall be provided to protect unused faceplate openings. Termination caps and plastic cover shall be provided to protect jack wiring.
Single outlet faceplate with RJ-45 jack with information outlet
Supply and fixing of 16 guage MS conduits in following sizes including cost of junction boxes, bends, elbows, sockets, tees etc. laying in slab cutting chasis and making good or surface mounted including all fixing hardware.(4.2) 25 mm dia
Providing and fixing in position the following 16 gauge PVC conduits concealed or exposed as called for including all acessories i.e. bends, junction boxes, outlet boxes with cover plates of approved make and design.(4.2.1) 25 mm Dia
Supply of following 19 inch width rack for ethernet switches with A.C. distribution box, wire manager, fan tray, lockable front tinted glass door and two pair angle to support the switch installed in the rack.
12 U Rack
9 U Rack
Supply of following Category 6, IDC patch panel prepackaged with wiring block with legs with legs insert labels, label holders, jumper troughs, metal back panel, duct assembly, screws, washers and an instruction sheet for termination of incoming pairs.
48 port Network Switch
42 port Network Switch
Supplying and fixing of Cat 6 Patch cord - 1 mtr
Public Address System
Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.(Note : Power Amplifire shall be 500W for the complete configuration)
Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with microphone assembly complete as required.
Supplying, installation, testing & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.
Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.
TELEPHONE CABLEING & TERMINATION SYSTEM
Supply, installation, testing and commissioning of MDF patch panel prepackaged with wiring block with legs, insert labels, label holders, jumper troughs, metal back panel duct assembly, screws washers and an instruction sheet for termination of incoming pairs. Rate shall include suitable size of lockable 1.6mm thick CRCA sheet steel enclosure duly powder coated. The cost shall be complete with fixing arrangements, foundations etc as required
100 pair Tag Block
Patch Cord for Voice 1 mtr for rack end
Supply, installation, testing and commissioning of Riser cable consisting of multiple core or solid copper conductors of 24 AWG size insulated with expanded polyethylene covered by a PVC skin and inner shielding for grounding. The core shall be covered by a layer of plastic tape and overlaid with a corrugated PVC plastic. The cable shall be as per the specifications laid down in the tender 100 Pair
Supply, installation, testing and commissioning of 4 pair Category 6 cable consisting of 23 AWG solid copper conductors and as per the specification. The cable should have flexible jacket and ripcord for easy stripability. 4-Pair
Providing and fixing in position the following 16 gauge PVC conduits concealed or exposed as called for including all acessories i.e. bends, junction boxes, outlet boxes with cover plates of approved make and design.25 mm dia conduit
Supply and installation, testing and commissioning following size KRONE make telephone tag block in lockable 16 gauge sheet steel enclosure complete as required completely flushed mounted.
50 pair Krone type tag block
Junction tag Box
Supply and installation of flush mounted Category 6 T 568 A or B outlet with G.I back box of adequate depth for good termination and all required accessories. The plastic shall be high impact, flame-retardant UL rated thermoplastic. Dust cover / Blank shall be provided to protect unused face plate openings. Termination cap and plastic cover shall be provided to protect jack wiring. Single outlet face plate with RJ-11 jack
CCTV System
Supply installtion Testing commissioning of 4.0 Megapixel , BULLET Camera with 4 megapixel HD 2.8-12mm Varifocal Lens, 36 IR LED upto 20 meters, Supports Android Apps.including outdoor housing with fixing arrangement etc ( IP66) Protection. POE Based as Required.
Supply installtion Testing commissioning of 2.0 Megapixel , IP Vandal Dome Camera with 2 megapixel HD 2.8-12mm Varifocal Lens, 36 IR LED upto 10 meters, Supports Android Apps IP54 Protection Rating. POE Based as Required.
Supply installtion Testing commissioning of Include NVR Software having Recording Storage System complete for whole system and camaras consisting sufficient nos. of 8 channels video recording on D1 resolution at real time, Support 4 hot-swappable hard disk direct attached. Recording Storage for 30 days at 25 fps H.264 resolution including 16 TB HDD Per NVR, Video survelience series HDD as required. with PC server, capable of managing and controlling recording parameters with high end features as required . License covers 10 video channels,.
Supply installtion Testing commissioning of 40" Wall Mounted LCD for display as required as per specifications and drawing
Supply installtion Testing commissioning of 9U Rack with glass front door, steel rear door, power supply, MCB, cable manager, drawer shelves and wiring channels to accommodate CCTV systems equipment and accessories as mentioned in the BOQ above and including all connections and terminations as required.
Supply installtion Testing commissioning of PoE Ethernet switch with suitable rack with 24 ports RJ45 10 base 1000 T with complete as required -Network Switch
Supply, Laying, termination, Installtion of 2 Core, 1.5 sqmm solid cu. conductor cable as required as per specifications
Supply, Laying, termination, Installtion of UTP CAT6 (A) armoured Cable as required as per specifications & Drawing.
Supply, Laying, termination, Installtion of 25mm PVC Conduit 1.8 mm thick as required as per specifications
Supply, Installation and Commisioning of dot matric printer.
FIRE FIGHTING WORK
Supplying Installing, testing and commissioning of 63mm mm dia single headed Gun mental Hydrant Valve with flanged inlet, stop valve, spindle and cast iron hand wheel. It has a female instantaneous outlet with Blank Cap and is Hydrostatically tested to 21 Kgf/cm2 pressure having a flow rate of 900 LPM at 5.5 Kgf/cm2 of pressure with blank cap and wheel as per IS 5290 etc. complete as per specifications. Make : WINCO/NEW Age including cost of materials, labour, HOM
Supplying and fixing Single headed external yardhydrant valve with 1 No. 63 mm dia instantaneous FMGunmetal/Stainless Steel coupling and cast iron wheel,ISI marked, conforming to IS 5290 (type A) with blankGunmetal/Stainless Steel cap and chain as required :Single headed Stainless steel
Supplying Installing, testing and commissioning of Reinforced Rubber Lined RRL Fire hose of 63mm dia 15m length as per IS 8423 binded with one set of male and Female lnstantainious Gun metal coupling as per IS 903 WINCO/NEW AGE complete including cost of materials, labour, HOM complete as per specifications.
Supplying Installing, testing and commissioning of 19mm dia 36.50m length hose with rubber lining smooth bore, reinforced of natural/synthetic fibres, a rubber cover finish shall be smooth, fluted or fabric marked with minimum thickness of 1.50mm and to with stand a working pressure of 1OKgf/sqcm confirms & tested as per IS 444 including cost of materials, labour, HOM complete as per specifications.
Supplying Installing, testing and commissioning of Gun metal Branch pipe size of 63mm dia x19mm dia as per IS 903 Make: WINCO/NEW AGE complete including cost of materials, labour, HOM complete as per specifications.
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :
50mm dia
65 mm dia
100 mm dia
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts,washers etc.as required :
50mm dia
150mm dia
200mm dia
Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required : 250mm dia .
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange.
65 mm dia
200mm dia
Supplying and installing pressure gauge of 100 mm dia., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm dia. pad cock valve, and G.I. pipe, elbow etc. complete as per specification no. FF-FFA/PG
Supplying and installing pressure switch with 12/15 mm dia isolation valve, G.I. nipple, elbow, etc complete as per specification no. FF-FFA/PS
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 5.5 kg/cm2 complete as required
Supplying and erecting M.S./CRCA cabinet for housing single hydrant valve (size 400 x 400 x 400mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessaryfixing material such as rubber bidding etc. duly painted in post box red colour.
Supplying and erecting M.S./CRCA cabinet for housing FireBrigade / SIEMESE connections (size 1250 x 400 x 300 mm.)made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8" x 6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour.
Supplying Installing, testing and commissioning of hydraulicallying operated sprinkler cabit Valve with water meter gong bell and trims as required, pressure gauges drain Valve, ball Valves check valve, strainer etc. including cost of materials, labour, HOM complete as per specifications.do- 150 mm dia
Providing & fixing flow switch in following sizes M.S.pipe including connection etc as required.
50mm dia
80 mm dia
100 mm dia
150mm dia
Providing, fixing, testing & commissioning ofinstallation control valve of cast iron body,brass/bronze working parts comprising of water motoralarm, bronze seat clapper, clapper arm andhydraulically driven mechanical gong bell to soundcontinuous alarm when the wet riser/sprinkler systemactivates, pressure gauges, emergencyreleases, strainer, pressure switch, cock valve complete withdrain valve and bypass, test control box, ball valves,MS pipe of required size, flanges, orifice plate, gasket etc of follwing sizes as required :150mm dia
Supplying, installation, testing & commissioning ofsprinkler flexible pipe (UL Listed) of stainless steelcomplete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPTmale thread to sprinkler head (Outlet) 15mm NPTfemale thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete asrequired. 1500mm
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : (It should be factory ready made)
2 way-100 mm dia Pipe
4 way - 150 mm dia Pipe
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.
Supply and Installation 25mm Air release valve as per IS:14845 ISI Marked
Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick@ 3.84 Kg/m, 40mm Nominal bore 4.05mm thick@ 4.43 Kg/m,50mm Nominal bore 4.47mm thick@ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm Nominal bore 4.85mm thick @ 10.10 Kg/m,1OOmm Nominal bore5.40mm thick@ 14.40 Kg/m,150mm Nominal bore 5.40mm thick@ 21. 20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc. including cost of materials, labour, HOM complete as per specifications.
-do- Galvanized Iron Pipes 150 mm dia
-do- Galvanized Iron Pipes 100 mm dia
-do- Galvanized Iron Pipes 80 mm dia
-do- Galvanized Iron Pipes 65 mm dia
-do- Galvanized Iron Pipes 50 mm dia
-do- Galvanized Iron Pipes 40 mm dia
-do- Galvanized Iron Pipes 32 mm dia
-do- Galvanized Iron Pipes 25 mm dia
External Burried pipe
Supply, Installation testing and commissioning of approved make heavy tubes (Class 'C') confirming to as per IS1239 Part- I (25mm Nominal bore 4.05mm thick@ 2.97 Kg/m, 32mm Nominal bore 4.05mm thick@ 3.84 Kg/m, 40mm Nominal bore 4.05mm thick@ 4.43 Kg/m,50mm Nominal bore 4.47mm thick@ 6.17 Kg/m, 65mm Nominal bore 4.47mm thick @ 7.90 Kg/m, 80mm Nominal bore 4.85mm thick @ 10.10 Kg/m,1OOmm Nominal bore5.40mm thick@ 14.40 Kg/m,150mm Nominal bore5.40mm thick@ 21. 20 Kg/m, Such as Tees elbows check nuts unions, Flanger, Nipples etc. including cutting welding, Trending fixing on walls, ceiling (Using 41-Tech pipe/M.S.angle supports work includes two coats of metal primer and two coats of Red enamel paint etc. including cost of materials, labour, HOM complete as per specifications.
-do- Galvanized Iron Pipes 150 mm dia
-do- Galvanized Iron Pipes 100 mm dia
Supplying Installing, testing and commissioning of 15mm dia quartized bulb type sprinkler of rating 68 degree centigrade with required accessories
Standard Spray (Upright Type)
Standard Spray (Pendant Type)
Horizontal Side Wall Sprinkler
Fire extinguisher
Supplying and erecting ABC Dry Chemical Powder type Fire extinguisher 4 kg capacity cartridge tyB with gun metal cap 150 gram CO2 gas cartridge powder and brackets conforming to IS 2171-1985 and complete erected with necessary clamps made from 50x6mm MS flat with nuts and bolts grouted in wall complete
Providing 4.5Kg C0 Wheel Type2 Providing 4.5Kg C02 gas valve type Fire Extinugisher, Tro lley Mounted, Easy Weight Management used Unused Mechanism, Gross Weight 19.1 Kg. empty Weight 14.6 Kg. Can Height 860MMDiameter 140MM, Discharge Time less than13 Sees, Controllable discharge mechanism, Applicable on Class 8&C Fire, 8 Rating 138, Can Constuction : Hot spinning/Forging, Valve Construction : Forging& Machining, Internal Coating of Can : Not Applicable, External coatingof Can : Spray Painting, Sheet metal thickness : 4.5M M lSI Approved,1 YearWarranty.with instalert system with Superior quality EPDM Rubber Hosepipe etc., including cost of materials, labour, HOM complete as per specifications.
Pumps
Supply installation, testing and commissioning of fire alarm Main panel with zone indication alaram etc. as required including cost of materials, labour, HOM complete as per specifications.
Supplying, installation, testing and commissioning of Electric driven Main Fire Pump (Sprinkler and Hydrant) suitable for automaticoperation and consisting of following, complete in allrespects, as required :(a) Horizontal type, multistage, centrifugal, split casingpump of cast iron body & bronze impeller with stainlesssteel shaft, mechanical seal conforming to IS 1520.(b) Suitable HP Squirrel cage induction motor, TEFC,synchronous speed 1500 RPM, suitable for operationon 415 volts, 3 phase 50 Hz, AC supply with IP 55protection for enclosure, horizontal foot mounted typewith Class-'F' insulation, conforming to IS-325.(c) M.S. fabricated Common base plate, coupling, couplingguard, foundation bolts etc. as required.(d) Suitable cement concrete foundation duly plasteredwith anti vibration pads.--2280 lpm at 70 m Head
Supply, Installation, Testing and Comissioning of electric driven pressurisation pump suitable forautomatic operation and consisting of following,complete in all respects, as required : (Jockey Pump)Horizontal type, multistage, centrifugal pump of castiron body and bronze impeller with stainless steel shaft,mechanical seal conforming to IS : 1520.Suitable HP squirell cage induction motor TEFC typesuitable for operation on 415 volts, 3 phase 50 HzAC supply with IP 55 class of protection for enclosure,horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325.M.S.fabricated Common base plate, coupling, couplingguard, foundation bolts etc. as required.Suitable cement concrete foundation duly plasteredand with anti vibration pads.--180 lpm at 70 m Head.
Supplying, installation, testing and commissioning ofelectric driven terrace pump suitable for automaticoperation and consisting of following, complete in allrespects, as required: (Terrace Pump)(a) Horizontal type, multistage, centrifugal, split casingpump of cast iron body & bronze impeller with stainlesssteel shaft, mechanical confirming to IS : 1520b) Suitable HP squirell cage induction motor TEFC typesuitable for operation on 415 volts, 3 phase, 50 Hz, ACsupply with IP55 class of protection forenclosure, horiziontal foot mounted type with Class-'F' insulation,conforming to IS-325.(c) M.S.fabricated common base plate, coupling, couplingguard, foundation bolts etc.as required. (d) Suitablecement concrete foundation duly plasteredand with anti vibration pads.--900 lpm at 35 m Head
CONTROL PANELS
FIRE ALARM SYSTEM
Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required
Supplying, installation, testing & commissioning of Intelligent Addressable type multisensor detector (Photo + Fixed Tempt. + Rate of Rise Tempt.) with base for use as heat or smoke or combined both automatic electronic addressing, microprocessor type with built in integrated short circuit isolator with operating tempurature from -20⁰C to + 60⁰C. Detector shall have auto learn, drift compensation etc. As per tender specification.
Supply, installation, testing & commissioning of Intelligent Addressable Control module with IP66 casing containing four relay outputs, each containing a potential-free DPDT contact with a fail-safe and in-built short circuit isolator The ambient temperature range shall be -20C to +60C.
Supply, installation, testing & commissioning of Intelligent Addressable break glass type Manual Call Point having inbuilt short circuit isolator & LED indicator with back box.
Intelligent Addressable loop powered Sounder having integrated short circuit isolator. It shall not required separate interface module/ power cable.
Intelligent Addressable loop powered Flasher having integrated short circuit isolator. It shall not required separate interface module/ power cable.
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
CABLE TRAY
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
450 mm width X 50 mm depth X 2.0 mm thickness
300 mm width X 50 mm depth X 1.6 mm thickness
200 mm width X 50 mm depth X 1.6 mm thickness
MS FRAME STRUCTURE
Supply, fabrication and installation of MS base frame for outdoor units complete with 2 coat of epoxy painting, vibration isolation pads, supports, hangers, railing, brackets etc. For construction Construction as approved by Architect/ Consultant. Apply 2 coats of epoxy primer 2 coats of epoxy paint and finish painting as approved by Architect. Stand to be made as per site conditions.
Supply, installation, testing and commissioning of flexible duct 50 mm dia. Fresh air fan for VRF indoor unit fresh air supply.
MS FRAME STRUCTURE
Supply, installation, testing and commissioning of the cabinet type centrifugal fans with backward curved inclined type heavy duty class with IP 55 protection and class F insulation complete with base frame to mount fan motor with adjusting brackets, vibration spring isolators, canvas connection and epoxy painted, with filter box (pre and fine filter) all as per specs. All accessories louvers, bird screen, Mounting racket, Stand or Hanging arrangement & electrical cable connection necessary for Fan Units are included. it shoul be AMCA certified.
3000 CFM fan, 30 mm static
2000 CFM fan, 30 mm static
Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets,nuts, bolts, screws linkages, flanges etc, as per specifications.
Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete asrequired and as per specifications.--- Fire damper
Under deck insulation
Supply and Installation, testing, commissioing of Underdeck Insualtion with 25 mm thick Fire retardent Glass wool rigid boardcovered with R P tissue paper & 30 mm gauge perforated aluminium clading , density 80 kg/cu.m sheet all joints for fixing and GI screws.
Supply and Installation, testing, commissioing of Propeller type wall mounted Exhaust fan with louver, cowl and bird screen on outside.
HVAC ( VRF UNIT)
Supply, Installation, Testing & Commisioning of modular type Variable Refrigerant Volume Air Cooled Outdoor Units suitable for cooling and heating, having all hermetically sealed inverter type scroll compressor, minimum two compressors for above 14HP modules , microprocessor based controller , top discharge type condensing units , with R 410A refrigerant , vibration isolators with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions & work even at 50 ° C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and EER not less than 6.5.
12 HP outdoor unit(Rate 16415pr hp)
14 HP outdoor unit
16 HP outdoor unit
20 HP outdoor unit
Supply,installation,testing andcommissioning of following minimum capacity 4 way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower,multi speed motor, coil section with DX Copper coil, electronic expansion valve,outer cabinet, drain pump,grill, necessary supports, vibration isolation, cordless remote controletc.,suitable for operation on single phase 230V±10%, 50HzAC supply, complete, as required.The units shall have automatic force shutdown provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27Degree C DB and 19 Degree C WB temperature.
SITC of VRV/VRF Ductable Indoor AC with Corded Remote and Refnet Joint . The unit shall be equipped with suitable electronic expansion valve, which can communicate with the controller in the condensing unit. The fan shall of the dual suction multi blade type and statically and dynamically balanced to ensure low noise and vibration free operation. Controls shall be provided to maintain the set room temperature within close tolerance limits.Units must be compact type in dimension with min 3 speeds of fan and min 400 CFM / TR to handle high CFM load .
8.0 HP/6.4 TR Ductable type unit with Minimum 2640 CFM
SUCTION LINE
Supply, Installation, testing and commissioning includingvaccumiazation and Nitrogen testing of following nominal sizes ofsoft/hard drawn copper refrigerant piping for VRV/VRF system,complete with fittings, with suitable adjustable ring type hangersupports, jointing/brazing including accessories, insulated with XPLEClass-O tubular insulation/with Class-O closed cell elastometricnitrile rubber tubular sleeves sections of specified thickness as givenbelow for Suction and Liquid lines, all accessories as perspecifications etc. as required :
28.58 mm dia (OD) (Soft drawn)with tube thickness 1.2 mm with 19 mm thick insulation
22.2 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19mm thick insulation
19 mm dia (OD) (Soft drawn)with tube thickness 1.2 mm with 19mm thick insulation
15.86 mm dia (OD) (Soft drawn)with tube thickness 1.2 mm with 19mm thick insulation
LIQUID LINE
12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation
CABLE TRAY
Supplying and installing following size of perforated painted with powder coating M.S. cable trays bends with perforation not more than 17.5%,, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required
450 mm width X 50 mm depth X 2.0 mm thickness
300 mm width X 50 mm depth X 1.6 mm thickness
200 mm width X 50 mm depth X 1.6 mm thickness
DUCTING/ SUPPORTS/ ENCLOSURE / SLEEVES FOR / REFRIGERANT PIPING / CABLING
Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.Thickness 0.63 mm sheet (24 gauge)
Supply, installation, testing and commissioning of copper conductor 2C*1.0 sqmm Control cabling with PVC conduit from indoor to outdoor unit.
Refnets for VRV System (To be supplied by unit manufacturer) Vendor is expected to minimise no. of joints that is required for a complete installation. model no. are as follows:
Supply, installation, testing and commissioning of drain piping using CPVC pipe SDR11 with CPVC fittings and insulated with 6mm thick nitrile rubber insulation finished with polished. The pipe goes below ground should be rapped with polythene sheet as follows:
50 mm Dia
40 mm Dia
32 mm Dia
Supply, Installation, Testing and Comissioning of package type MBBR (moving bed biofilm reactor). Based STP and WTP technology with tertiary treatment comprises of MGF (Multi-Grade Fliter and ACF (Activated Carbon Filter) complete in all respect. 20 KLD
SITC of electric traction passenger lift with rated capacity 8 passenger, 544 Kg for lift travelling upto level 5 at a speed of 1 Mps.
SITC of electric traction passenger lift with rated capacity 3 passenger, Physically handicap for lift travelling upto level 3
Operation & Maintenance cost for Civil, Electrical, Machanical, HVAC, Fire fightning, Plumbing, Sanitary, Water Supply etc works for 5 years. - 1st year.
Operation & Maintenance cost for Civil, Electrical, Machanical, HVAC, Fire fightning, Plumbing, Sanitary, Water Supply etc works for 5 years. - 2nd year.
Operation & Maintenance cost for Civil, Electrical, Machanical, HVAC, Fire fightning, Plumbing, Sanitary, Water Supply etc works for 5 years. - 3rd year.
Operation & Maintenance cost for Civil, Electrical, Machanical, HVAC, Fire fightning, Plumbing, Sanitary, Water Supply etc works for 5 years. - 4th year.
Operation & Maintenance cost for Civil, Electrical, Machanical, HVAC, Fire fightning, Plumbing, Sanitary, Water Supply etc works for 5 years. - 5th year.
M/s Raghav Engineers
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid