Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.4 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹24.9 L+₹3.3 L (15.5%)Rejected-Finance | L2 | Rejected-Finance Highest bid quoted other then L1 | |
| 3 | L3₹25.4 L+₹3.8 L (17.6%)Rejected-Finance HOUSE NO 6 18 WARD NO 05 HOUSING BOARD COLONY HANUMANGARH JN 335512 RAJ | HANUMANGARH | RAJASTHAN | 335512 | L3 | Rejected-Finance Highest bid quoted other then L1 | |
| 4 | L4₹26.9 L+₹5.4 L (24.9%)Rejected-Finance NEAR GAYRTI TEMPLE PURANI GINANI BIKANER | BIKANER | BIKANER | RAJASTHAN | L4 | Rejected-Finance Highest bid quoted other then L1 | |
| 5 | L5₹27.0 L+₹5.4 L (24.9%)Rejected-Finance | L5 | Rejected-Finance Highest bid quoted other then L1 |
Tender Value
Refer Docs
EMD Value
₹62,000
Closing Date
23 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Sri Ganganagar
Garrison Engineer Sri Ganganagar, Military Engineer services , Sri Ganganagar Cantt Rajasthan-335001
WELCOME MAINTENANCE AND PERIODICAL SERVICES TO OFFICERS MD ACCN OF BHAGAT ENCLAVE AT MILITARY STATION SRI GANGANAGAR
2022_MES_526181_1
GE SGNR/ TOK-11 OF 2022-23
Open Tender
Civil Works
Item Rate
270 days
GE Sri Ganganagar
D Class a(i) for un-enlisted, refer NIT para 8
6 documents required · 6 mandatory
₹500
GE Sri Ganganagar
₹62,000
Yes
22 Jul 2022
25 May 2022
25 Jun 2022
25 May 2022
23 Jun 2022
2 Jun 2022
60 days
Amount
Taking down cement plaster on brick/ concrete surfaces of walls, including racking out joints, hacking for keys scrubbing down with water etc. complete all as specified directed by Engineer-in-Charge.
M&L for 15mm thick, rendering in cement mortar 1:6 to brick/concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
M&L for 15mm thick, rendering in cement mortar 1:4 to brick/concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
M&L 5mm thick, rendering in cement mortar 1:3 to ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, over a coat of primer with wall care putty as preparatory to distempering complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over and a coat of white wash complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of new plastered or unplastered surfaces of ceiling and applying two coats of white wash complete all as specified and directed by Engineer - in - Charge.
M&L for preparation of old decorated plastered or un-plastered surfaces of walls by brooming down or steel wire brushing,scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spots and then applying one coat of white wash complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of old decorated plastered or un-plastered surfaces of ceiling by brooming down or steel wire brushing,scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spots and then applying one coat of distemper oil emulsion complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of old decorated plastered or un-plastered surfaces of ceiling by brooming down or steel wire brushing,scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spots and then applying one coat of white wash complete all as specified and directed by Engineer-in-Charge.
M&L for complete removal of existing treatment of walls including prepration of surfaces with acrylic putty and applying two coats of oil emulsion distemper complete all as specified and directed by Engineer-in-Charge.
M&L for complete removal of existing treatment of walls including prepration of surfaces and applying one coat of oil emulsion distemper complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of old decorated plastered or un-plastered surfaces of walls by brooming down or steel wire brushing,scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spots and then applying one coats of cement base paint complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of old decorated plastered or un-plastered surfaces of walls by brooming down or steel wire brushing,scrapping down smoke soot,moulds,moss and efflorescent salts and trading oil and greasy spots and then applying two coats of cement base paint complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of old painted steel surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of old decorated plasered surfaces of walls by using pressure washer, remove all dirt & dust and then applying two coats of Premium Acrylic Smooth exterior paint with silicone additives on external surfaces of wall including wall primer over two coats acrylic putty as per manufacturers instructions complete all as specified and directed by Engineer-in-Charge. Make: Asian paints (Apex) Emulsion paint, shalimar extra premium acrylic emulsion, berger weather coat all guard
Dismantling floor hearth or wall tiling including cement mortar bedding complete all as specified and directed by Engineer-in-charge.
M&L for glazed ceramic coloured tiles, interior grade 600x300x7 mm as on vertical surfaces like dados or skirting laid over and including 10mm thick rendering in CM 1:4, set & jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed by Engineer - in - Charge.
M&L for non-skid joint free coloured ceramic tile 7 to 8mm thick area of each tile exc 0.11 Sqm but not exc 0.18Sqm, in floor etc. laid over and including 15mm thick screed bed in cement mortar 1:4 set & joined in cement slurry and pointed in coloured cement to match the shade of tile, complete all as specified and directed by Engineer-in-charge.
M&L for vitrified ceramic tiles double charged 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:4 complete all as specified and directed by Engineer-in-charge.. Make: Johnson (Marbonite)/Kajaria/Somany/ Orient Bell Granito/Oracle Grenito (Marbito)
M&L for vitrified ceramic tiles double charged10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm,as in as in vertical surface like dado/ skirting etc , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:4 complete all as specified and directed by Engineer-in-charge.. Make: Johnson (Marbonite)/Kajaria/Somany/ Orient Bell Granito/ Oracle Grenito (Marbito)
M&L granite (appproved colour) work 18- 20 mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and laid over and including 10 mm thick cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer-in-Charge.
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth. In brick walls complete all as specified and directed by Engineer-in-Charge.
S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe etc including provision of PCC (1:5:10) type E2 in filling, making good to floor complete all as specified and directed by Engineer - in - Charge.
Taking down chowkhats or frames (without taking off shutters from the frames) not exceeding 1.5 Sqm each complete all as specified and directed by Engineer - in - Charge.
Taking down shutters of any description exc. 1 sqm but n. exc.2 sqm each complete all as specified and directed by Engineer - in - Charge.
Taking down chowkhats or frames (without taking off shutters from the frames) exc. 1.5 sqm but n. exc.4 sqm each complete all as specified and directed by Engineer - in - Charge.
S & F fiber glass reinforced plastic (FRP) door frame (ISI marked) of cross-section 90mm x 45mm (minimum) having single rebate to receive shutter of 30mm thickness. The laminate door frame moulded with fire retardant grade unsaturate polyster resin and chopped mat, door frame laminate shall be 2mm thick, filled with core material and shall be filled with suitable wooden block for fixing hinges and other Hardware accessories, the frame shall be covered with fiber glass from all sides. MS stay shall be provided at the bottom to stand by the frame complete all as specified and directed by Engineer-in-Charge.
S&F in repair CP angle valve for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy typecomplete all as specified and directed by Engineer - in - Charge.
S&F in repair CP two way bib tap for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy typecomplete all as specified and directed by Engineer - in - Charge.
S&F central hole wash basin mixer 15mm bore brass waste with 10mm dia 450mm long copper pipes complete all as specified and directed by Engineer - in - Charge.
S&F chromium plated brass wall mixture non telephonic with fancy knob with hot and cold arrangements with long shank and cup all as specified and as approved complete all as specified and directed by Engineer - in - Charge.
S & F powder coated coloured aluminium frame for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. The top and bottom horizontal members and vertical members adjacent to wall shall be fixed with floors, ceiling, walls and cills where required and fixed with the help of rawl plugs and screws or with fixing clips or with expansion hold plate fasteners. Aluminium section shall be smooth, rust free, straight, mitred and jointed mechanically wherever required complete in all respect all as specified & directed by Engineer-in- charge. Note:- Thickness of powder coating shall be less than 50 micron.
S&F to 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour , made with fireretardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames complete all as specified and directed by Engineer-in-Charge.
S&F powder coated anodised aluminium window (glazed and gauzed both), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed by Engineer - in - Charge. Note:- Thickness of powder coating shall be less than 50 micron.
S&F powder coated anodised aluminium window and ventilator including frame and shutters and provision of necessary rubber gasket for fixing glass panes etc complete all as specified and directed by Engineer - in - Charge. Note:- (i) Thickness of powder coating shall be less than 50 micron. (ii) Glass panes and wire mesh shall be measured and paid seperately under respectivelt items
S&F butt hinges, medium weight, cold rolled stainless steel, and fixed of size 100mm fixing properly with screws etc complete all as specified and directed by Engineer - in - Charge..
S&F 200 mm long Aluminium anodised barrel tower bolts of extrued section (ISI marked) complete all as specified and directed by Engineer - in - Charge.
S&F 150 mm extruded aluminium alloy handles,cast type, anodised (ISI marked) (D type Handle and back side staple) complete all as specified and directed by Engineer - in - Charge.
S & F 40 mm dia cupboard knob brass polished mild steel fixed with nut and washers etc complete all as specified and directed by Engineer - in - Charge.
S&F 5.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sqm the each pane complete all as specified and directed by Engineer - in - Charge.
S&F in repair 5.0 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sqm the each pane complete all as specified and directed by Engineer - in - Charge.
Repairing/ leasening door / window shutters of any size and refixing in same opening/other opening complete all as specified and directed by Engineer - in - Charge.
S&F 19/20 mm prelaminated particle board, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in cup board shutter/shelves/cabinet etc complete all as specified and directed by Engineer - in - Charge.
S&F in repair 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed by Engineer - in - Charge.
S&F in repair, stainless steel curtain rod 25 mm dia (minimum weight 0.36 Kg per RM) with brackets, fancy knobs and rings (20 cm c/c) etc complete all as specified and directed by Engineer-in-charge.
S & F in repair towel rail 20 mm dia, D type, 600 mm long between flanges chromium plated fixed with and including chromium plated brass screws and wooden/ plastic cleats (minimum weight 170 gm) complete all as specified and directed by Engineer-in-charge.
S & F in repairs stainless steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18mm to steel frame of window with tinned tacks or galvanised wire stapels complete all as specified and directed by Engineer-in-charge.
S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified.including taking down ms frame and refing ms frame with new wire mesh with tinned tack/by welding in steel window/ventilator and making good the disturbed portion during execution complete all as specified and directed by Engineer-in-charge.
S&F in repair mild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed by Engineer-in-charge.
S&F in repair 150mm length floor door stopper of aluminium alloy body and tongue,anodised with hard drawan steel spring fixed in floor complete all as specified and directed by Engineer-in-charge.
S & F in repair stainless steel sink with drainage board made out of 1.00 mm thick sheet for kitchen with plug, washers, waste fitting, waste pipe, cast iron cantilever brackets, connecting unions over all size 915mmx 460mm with bowl size 410mmx 330mmx 160mm. complete all as specified and directed by Engineer-in-charge.
S&F in repair stainless steel plate rack of size 36"x 36"x10" made out of 0.6 mm thick stainless steel sheet of first quality complete all as specified and directed by Engineer-in-charge.. Make:- Blue star Model No- SS KPR-317 or equvalent in any of the make specified in list of product
S&F in repair 32 mm waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer - in - Charge.
Taking up or down 20mm bore steel water tubing galvanised with connection complete all as specified and directed by Engineer - in - Charge.
S&F steel water tubing galvanised 20mm bore, “medium grade” with all fittings and fixed to walls and ceiling or in floor complete all as specified and directed by Engineer - in - Charge.
Fixing only steel water tubing galvanised 20mm bore with and including new fittings after cleaning complete all as specified and directed by Engineer - in - Charge.Note:- Serviceable GI tubing obtained from srl item No 56 shall be reused.
Taking up or down 15 mm bore steel water tubing galvanised with connection complete all as specified and directed by Engineer - in - Charge.
S&F steel water tubing galvanised 15mm bore, “medium grade” with all fittings and fixed to walls and ceiling or in floor complete all as specified and directed by Engineer - in - Charge.
Fixing only steel water tubing galvanised 15mm bore with and including new fittings after cleaning complete all as specified and directed by Engineer - in - Charge. Note:- Serviceable GI tubing obtained from srl item No 59 shall be resused.
S & F in repair bib taps (long body) with wall flange 15mm dia, cast copper alloy chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed by Engineer-in-charge.
S & F in repair swan neck pillar taps 15mm dia cast copper alloy with capston heads, chromium plated, fancy type with long screwed shanks and fly nuts, screwed down, high pressure with or without lettered 'Hot' or 'Cold' screwed for iron pipe complete all as specified and directed by Engineer-in-charge.
S & F in repair stop/angle valves 15mm dia, cast copper alloy fancy type chromium plated with long shank and cup (concealed type) serewed down, high pressure , with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed by Engineer-in-charge.
S & F ball PTMT valve 20mm dia high pressure apoxy coated aluminium rod and with polythene float and fly nut, screwed for iron pipe complete all as specified and directed by Engineer-in-charge.
S & F in repair ball PTMT valve 20mm dia high pressure apoxy coated aluminium rod and with polythene float and fly nut, screwed for iron pipe complete all as specified and directed by Engineer-in-charge.
S&F glass corner self assembly, fancy type, made of 5 mm thick sheet toughened glass of size 250x250mm, fixed with CP brackets, complete all as specified and directed by Engineer-in-charge.
S&F 5 mm thick and 450 mm long glass shelves fancy type and fixed over CP brass brackets all as specified and directed by Engineer-in-charge.
S & F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed by Engineer-in-charge.
S & F Grating doom 100mm dia of PTMT without hole (Minimum weight 25gms) complete all as specified and directed by Engineer-in-charge.
S & F in repair brass chromium over head plated shower 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union complete all as specified and directed by Engineer-in-charge.
S & F PVC connection 15mm size with PTMT nuts of length 450mm including CP brass nuts on both sides complete all as specified and directed by Engineer-in-charge.
S & F in repair PVC valveless syphonic action type 10 ltr capacity flushing cistern low level with inlet ball valve, float and handle including brackets with 32mm dia flush pipe of polyethylene of low or high density complete all as specified and directed by Engineer-in-charge.
S & F in repair plastic water closet seat black/white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed by Engineer-in-charge.
S&F in repair health faucet (hand shower for EWC) having 1.2 m length with hanging device Chromimum plated complete all as specified and directed by Engineer - in - Charge. Make : Cera/Hindware/Paryware/Jaquar
S&F in repair, vitreous china wash hand basin white, flat back size 550x400mm & including a pair of cast iron brackets embedded in PCC 1:3:6 type C1 blocks of size 10x7.5x15cm, 32 mm dia PVC waste pipe and 32mm bore chromium plated brass waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement & other end fixed, (excluding tap, waste chain & plug),complete all as specified and directed by Engineer - in - Charge.
S&F in repair, cabinet of PTMT with looking mirror of size 450x600mm complete all as specified and directed by Engineer-in-charge.
Dismantling and taking down water tank of capacity exc. 250 Litre & n. exc. 500 Litre capacity complete all as specified and directed by Engineer - in - Charge.
Dismantling and taking down water tank of capacity exc. 500 Litre & n. exc. 1000 Litre capacity complete all as specified and directed by Engineer - in - Charge.
S&F rotational moulded white colour polyethylene water storage tank 500 ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer - in - Charge. (Note : PVC tanks shall be ISI marked, having three layres and white colour)
S&F rotational moulded white colour polyethylene water storage tank 1000 ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed by Engineer - in - Charge. (Note : PVC tanks shall be ISI marked, having three layres and white colour)
S&F 32 mm * 800 mm long low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engineer - in - Charge.
Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes exc 500 but n exc 1000 litres capacity, etc complete all as specified and directed by Engineer - in - Charge.
S & F in repair 3mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane including hacking out old broken glass complete all as specified and directed by Engineer-in-charge.
S&F cast iron floor trap of 75 mm bore, with grating including jointing to waste pipe, fixed in cement concrete type B1 (1:2:4), complete all as specified and directed by Engineer-in-charge.
S&F toilet paper holder, brass chromium plated fixed to walls with chromium plated (CP) brass screwscomplete all as specified and directed by Engineer - in - Charge
S&F soap dish brass chromium plated fixed glossy with screws complete all as specified and directed by Engineer - in - Charge
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by Engineer-in-charge.
S & F 110 mm bore PVC (SWR) rain water pipe single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed by Engineer-in-charge
S&F 110mm bore PVC (SWR) bends any rediuscomplete all as specified and directed by Engineer-in-Charge
S & F Stack clamps out of 50mm by 5 mm flat iron and 16mm dia round iron stays for 100mm bore of pipe, including bolts and nuts and securing ends of stays to wall or roof etc complete all as specified and directed by Engineer - in - Charge.
S&F alluminium body door closer hydraulically regulated, designation No. 3, universal type, suitabel for door shutters upto 851 to 1000 mm in width and of weight not more than 61 to 80 kg complete all as specified and directed by Engineer-in-charge.
S&F in repair waste coupling of stainless steel (half or full threaded) of 40 mm complete all as specified and directed by Engineer - in - Charge. (Minium weight 60 gms)
S & F in repair jet spray for EWC including all necessary fixing arrangments complete all as specified and directed by Engineer - in - Charge.
S&F gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed of 20 mm bore, all as specified and as approved by GE/Engineer-in-Charge.
Dismantling of boarding any description fixed in any position with nails/ screws complete all as specified and directed by Engineer - in - Charge.
M&L for 0.90mm thick decorative laminates 'Mica, type 1 of surface finished,colour and pattern as approved, fixed with adhesive as per makers instructions complete all as specified and directed by Engineer - in - Charge.
S&F 25 mm size magnetic catches with Plastic body and striking plate including letting in and fixed complete all as specified and directed by Engineer - in - Charge.
S&F continuous (piano) hinges 20mm & 10 MM width of flap, mild steel bright finish or electrogalvanised of complete all as specified fixed with CP steel screws complete all as specified and directed by Engineer - in - Charge.
M &L for providing Kitchen Cabinet in required sizes at site made out of 18 mm thick one side decorative laminate and other side balancing lamination sheet consisting of carcass 18 mm thick PVC sheet & PVC sheet & Provision of shutters made out of 18 mm thick one side decorative laminated PVC sheet with all required brackets SS screws e.t.c. The panels shall be fabricated using adhesive and screws where ever required . All the edges shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent finish as per manufacturer instructions and as directed by Engineer-in-Charge.
M&L for Plain fillets. square, rectangular or triangular in section exc 6 sqcm & n exc 12 sqcm, clean sawn, secured with nails or brads complete all as specified and directed by Engineer - in - Charge
M&L for Plain fillets. square, rectangular or triangular in section exc 13 sqcm & n exc 25 sqcm, clean sawn, secured with nails or brads complete all as specified and directed by Engineer - in - Charge
S&F in repair, vitreous china wash down water closet pan (Pedstal pattern) white excluding flushing cistern & flush pipe but including seat cover complete all as specified and directed by Engineer - in - Charge.
S&F door closer hydraulically regulated, designation No. 3, universal type, suitabel for door shutters of size 850 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed by Engineer-in-charge.
Taking down shutters of any description exc. 1 Sqm but n.exc 2 sqm each and refixing in the same opening including easing and adjusting of shutter as required including renewal of unserviceable screws complete all as specified and directed by Engineer - in - Charge.
M&L for PCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in flooring as in laveling 25 mm thick finsihed fair and even complete all as specified and directed by Engineer - in - Charge.
Note : Amount of credit for retrieved materials is mentioned in Sch 'A' Section-II of tender documents in pdf form which will be deducted while acceptance of tender offline.
RM INFRASTRUCTURE
R B Infrabuilders
M/S KARNI CONSTRUCTION COMPANY
AYUSH BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .