REPAIR REPLACEMENT OF PUMPS MOTORS STARTERS CONTROL PANEL RELAYS FILTERATION PLANT RO SOLAR WATER HEATING SYSTEM AND EXTERNAL WATER SUPPLY CLEANING OF WATER TANK OF VARIOUS CAPACITY AND MISC CONNCETED ITEMS AT RAMBAN AND BANIHAL AREA UNDE

Amount

Material and labour for taking out Motor Set of capacity 10 H.P to 20 HP from position and transportation of same from site to workshop and back, dismantling of cable/ pipe connection and reinstallation of motor set after necessary repairing on the existing foundation and making electrical connections including necessary nuts, bolts, washers etc., required at site of work, complete all as specified & directed Note : All spares parts required shall be measured and paid for separately as appended below:-

(a) Ball Bearing of suitable size

(b) Rubber washer of suitable size

(c ) Packing sheet of suitable size

(d) Bush cover of suitable size

(e) Mechanical Seal of suitable size

(f) Circlips Clamp of suitable size

Material and labour for taking out Motor Set of capacity 5 H.P to 7.5 HP from position and transportation of same from site to workshop and back, dismantling of cable/ pipe connection and reinstallation of motor set after necessary repairing on the existing foundation and making electrical connections including necessary nuts, bolts, washers etc., required at site of work, complete all as specified & directed Note : All spares parts required shall be measured and paid for separately as appeded below:-

(a) Ball Bearing of suitable size

(b) Rubber washer of suitable size

(c ) Packing sheet of suitable size

(d) Bush cover of suitable size

(e) Mechanical Seal of suitable size

(f) Circlips Clamp of suitable size

Material and labour for taking out Motor Set of capacity 1 H.P to 3 HP Centrifugal/submerisble sewage from position and transportation of same from site to workshop and back, dismantling of cable/ pipe connection and reinstallation of motor set after necessary repairing on the existing foundation and making electrical connections including necessary nuts, bolts, washers etc., required at site of work, complete all as specified & directed Note : All spares parts required shall be measured and paid for separately as apended here-in-after:-

(a) Ball Bearing of suitable size

(b) Rubber washer of suitable size

(c ) Packing sheet of suitable size

(d) Bush cover of suitable size

(e) Mechanical Seal of suitable size

(f) Circlips Clamp of suitable size

Material and labour for rewinding of damaged/burnt motor of capacity 1 H.P to 20 H.P any type by using enamelled copper wire of superior quality of existing grade and same Nos. of turns including varnishing ‘F’ class insulation and drying in heat chamber / oven including all other material / fittings and testing on completion, complete all as specified & directed.

Material and labour for taking out Centrifugal Pump of capacity 10 HP to 20 H.P and transportation of same from site to workshop and back, dismantling of cable/ pipe connection and reinstallation of pump set after repair on the existing foundation and making electrical connections complete all as specified and directed Note : All spares parts required shall be measured and paid for separately as apended below:-

(a) Pump overhauling GM bushes ,shaft rematteling making key gland packing,incl all engineering work.

(b) Pump shaft stainless steel of same make and model duly grinded/polished

(c) Bearing of suitable size of pump

(d) Plugging leaks in casing by welding the same incl grinding for smooth surface

Material and labour for taking out Centrifugal Pump of capacity 1 HP to 7.5 H.P and transportation of same from site to workshop and back, dismantling of cable/ pipe connection and reinstallation of pump set after repair on the existing foundation and making electrical connections complete all as specified and directed Note : All spares parts required shall be measured and paid for separately

(a) Pump overhauling GM bushes ,shaft rematteling making key gland packing,incl all engineering work.

(b) Pump shaft stainless steel of same make and model duly grinded/polished

(c) Bearing of suitable size of pump

(d) Plugging leaks in casing by welding the same incl grinding for smooth surface

Supply and fixing in replacement of CI Non Return Sluice Valves ISI Marked flanged class 1.6 PN with by-pass arrangement and necessary bolts and nuts of suitable size with and including rubber gasket for flanged joints and testing including taking out old unserceable non return valves complete of following sizes :- Make : KIRLOSKAR / BIR / BIV / L&T / KARTAR / ZOLOTO

(a) 150 mm bore

(a) 100mm bore

(b) 80mm bore

Supply and fixing in replacement of CI Sluice Valves ISI Marked flanged class 1.6 PN with necessary bolts and nuts of suitable size with and including rubber gasket for flanged joints and testing including taking out old unserviceable sluice valves complete of following sizes :- Make : KIRLOSKAR / BIR / BIV / L&T / KARTAR / ZOLOTO

(a) 150 mm bore

(a) 100 mm bore

(b) 80 mm bore

Supply and fixing in replacement of Gun metal globe, Ball or gate valve class-2 with iron wheel head screwed both ends for pipes of following sizes complete including taking down old unserviceable gate valves all as specified and directed :- Make : KIRLOSKAR / BIR / BIV / L&T / KARTAR / LEADER / ZOLOTO

(a) 80 mm bore

(b) 63 mm bore

(c) 50mm bore

(d) 40 mm bore

(e) 32 mm bore

(f) 25 mm bore

(g) 20 mm bore

Supply and fixing in replacement of Cast Iron Foot Valve, conforming to IS-4038, complete suitable for pipes of following sizes complete including taking down old unserviceable foot valve all as specified and directed :- Make : KIRLOSKAR / BIR / BIV / L&T / KARTAR / LEADER / ZOLOTO

(a) 80 mm bore

(b) 63 mm bore

(c) 50 mm bore

Excavation in trenches not exceeding 1.5 mtr wide and 1.5 mtr in depth for laying of pipe lines and getting out old pipes in soft/lloose soil all as specified and directed by Engr-in-Charge.

Returning and filling in incl spreading, levelling watering and well ramming in layers not exc 25 cm in soft / loose soil, all as specified and directed.

Removal of excavated surplus spoil /rocks at a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr from the starting point all as directed.

Taking out Mild Steel / Cast Iron / Ductile Iron / Galvaniser Iron water mains including all fittings with spigot and socket ends or flanged ends including lead / tyton joints and burning out lead joints and recovering lead, cleaning the pipe and removing to store for reuse complete all as specified and as directed :- Note : Excavation and earth work shall be measured and paid for separately.

(a) 100 mm bore

(b) 80 mm bore

(c ) 50 mm bre

(d) 40 mm bore

(e) 25 mm bore

(f) 20 mm bore

Supply and fixing in replacement of Galavised iron tubing (GI), medium grade, with all fittings such as sockets, bends, elbows, tees, short pieces, connectors, back nuts, diminshing pieces, caps, plugs and unions etc., laid in trenches / fixed to walls and ceilings or laid in floors, complete all as specified and as directed of the following description :- Make : JINDAL PIPES / TATA / BST / PRAKASH SURYA

(a) 100 mm bore

(b) 80 mm bore

(c) 50 mm bre

(d) 40 mm bore

(e) 25 mm bore

(f) 20 mm bore

Material & Labour in replacing Gland for pump set capacity 2 HP to 20 HP complete all as specified and directed by Engr-in-Charge.

Supply only High Strength Calcium based granular disinfectant for water treatment, more stable than chlorine gas, and stronger than Bleaching Powder and Sodium Hypochlorite of following specifications :- (a) Chemical analysis & physical observations : Description : Whitish granules of granular size (Mesh passing through – 100 BSS) : 1.1 (± 0.1) %, Water / moisture : 5.00 (± 0.2) % Other insoluble Calcium salts: 1.1 (± 0.1) % Mercury and other Heavy Metal contaminants : BDL (The chlorination chemical must contain appropriate quantities of dispersants / corrosion inhibitors to prevent encrustation / scaling in distribution systems) (b) Stability : Projected shelf life of chlorination chemical must be one year with minimal loss of chlorine. Make : Purichlore / Mark Daxter / ALTOCH-Gp (Declivace Technologies Pvt Ltd) / Any E-in-C approved Make

Supply only Hypochlorous Acid (HOCL) for chlorination of drinking water disinfection solution having high residual effect, clear colour less and potent germicide non corrosive and non foaming stable up to 100° C for drinking water as and when required in HDPE jericanes of 35 Litres capacity having the following features : (a) Potent germicide (b) Slim control (c) High residual effect to avoid contamination (d) Less hazardous (e) Work at low dosage in post disinfection (f) No after taste (g) Most reliable in operation (h) Eco friendly and biodegradable Make : Penta Water Treatment / Seacolor/ Hygene Maddox People Care / Super-Chlor Total

Supply only Potassium aluminum sulfate, clear in colour of class 1 quality suitable for purification of raw water all as specified and directed by Engr-in-Charge.

Supply only Bleaching powder class 1 qualiity all as specified and directed by Engr-in-Charge.

Supply only Lead pig superior quality all as specified and directed by Engr-in-Charge.

Supply only Lead wool superior quality all as specified and directed by Engr-in-Charge.

Draining out water from RCC overhead water storage tank of capacity 90,000 Ltrs, taking out sludge and depositing the same outside the Cantt area at a place meant for the purpose, removing all scale, dirt, algae, vegetation if any and flushing after cleaning with water and bleaching powder, cleaning walls and floors by scratching with wire brushes all as specified and directed.

Draining out water from sedimentation tank of capacity 80000 Ltrs, taking out sludge and depositing the same outside the Cantt area at a place meant for the purpose, removing all scale, dirt, algae, vegetation if any and flushing after cleaning with water and bleaching powder, cleaning walls and floors by scratching with wire brushes all as specified and directed.

Draining out water from Mild Steel water storage tank or RCC Tank of capacity 50000 / 60000 Ltrs, taking out sludge and depositing the same outside the Cantt area at a place meant for the purpose, removing all scale, dirt, algae, vegetation if any and flushing after cleaning with water and bleaching powder, cleaning walls and floors by scratching with wire brushes all as specified and directed.

Draining out water from underground water storage tank of capacity 45000 Ltrs, taking out sludge and depositing the same outside the Cantt area at a place meant for the purpose,removing all scale,dirt,algae,vegetation if any and flushing after cleaning with water and bleaching powder, cleaning walls and floors by scratching with wire brushes all as specified and directed.

Draining out water from clear water tank of capacity 40000 Ltrs, taking out sludge and depositing the same outside the Cantt area at a place meant for the purpose, removing all scale, dirt, algae, vegetation if any and flushing after cleaning with water and bleaching powder, cleaning walls and floors by scratching with wire brushes all as specified and directed.

Draining out water from underground / semi underground water storage tank of capacity 30000 Ltrs, taking out sludge and depositing the same outside the Cantt area at a place meant for the purpose, removing all scale, dirt, algae, vegetation if any and flushing after cleaning with water and bleaching powder, cleaning walls and floors by scratching with wire brushes all as specified and directed.

Draining out water from PVC water storage tank of capacity 10000 Ltrs, taking out sludge and depositing the same outside the Cantt area at a place meant for the purpose, removing all scale, dirt, algae, vegetation if any and flushing aftercleaning with water and bleaching powder, cleaning walls and floors by scratching with wire brushes all as specified and directed.

Draining out water from PVC water tank of capacity 5000 Ltrs, taking out sludge and depositing the same outside the Cantt area at a place meant for the purpose, removing all scale, dirt, algae, vegetation if any and flushing after cleaning with water and bleaching powder, cleaning walls and floors by scratching with wire brushes all as specified and directed.

Draining out water from PVC overhead water tank of capacity ranging from 250 Ltrs to 500 Ltrs placed at different locations at Ramban, Banihal & Patnitop, taking out sludge and depositing the same outside the Cantt area at a place meant for the purpose, removing all scale, dirt, algae, vegetation if any and flushing after cleaning with water, cleaning walls and floors by scratching with wire brushes all as specified and directed.

Draining out water from PVC overhead water tank of capacity ranging from 1000 Ltrs placed at different locations at Ramban, Banihal & Patnitop, taking out sludge and depositing the same outside the Cantt area at a place meant for the purpose, removing all scale, dirt, algae, vegetation if any and flushing after cleaning with water, cleaning walls and floors by scratching with wire brushes all as specified and directed. Note for Serial Item No 28 to 36 : 1. The 'Date of Cleaning' and 'Due on' shall be written with synthetic enamel paint prominently on the tanks cleaned all as directed by the Engr-in-Charge. The quoted rate shall be deemed to be inclusive of this aspect. 2. The T&P required for cleaning of the tanks is deemed to be included in the unit rate quoted by the contractor.

Taking out old unserviceable filter media from existing gravity type filter, cleaning the filter thoroughly from inside, outside and channel all around, taking out sludge and throwing the same in low lying area including replacing filter media with new filter media all as specified and directed by Engineer-in-Charge. NOTE :-- Supply only new filter media shall be measured & paid for separately as under :- Supply only filter media of size as mentioned below :-

a) Course aggregate of size 63mm

b) Course aggregate of size 40mm

c) Course aggregate of size 20mm

d) Course aggregate of size 12.5mm

e) Course sand suitable for filter plant

Repair/servicing of chemical dosing electric operated of make Renuka Tech Model RWT-DLX-0003, at site with the replacement of following unserviceable spares installed at water supply installation. Note : All spares parts required shall be measured and paid for separately as supply only under following items of Sch ‘A’

(a) Supply only non return valve of suitable size complete all as specified.

(b) Supply only complete set of inlet and outlet pipe for chemical dosing pump complete all as specified.

(c ) Supply only foot valve with strainer, 75 mm long complete all as specified

(d) Supply only regulator with marking from 1 to 10 to control discharge of HOCL complete all as specified.

Submersible flat cable PVC insulated and PVC sheathed LT 1100 volts grade with copper conductor of size 10 Sqmm 3 Core, complete all as specified and directed. Make : Havells / Finolex / Polycab / Plaza / Asian

Submersible flat cable PVC insulated and PVC sheathed LT 1100 volts grade with copper conductor of size 16 Sqmm 3 Core, complete all as specified and directed. Make : Havells / Finolex / Polycab / Plaza / Asian

Supply only PVC Flexible pipe of size 63mm as complete as specified and as directed by the Engr-in-Charge

Replacement of ON LOAD change over switch 415 volt sheet metal enclosure 4 pole of capacity 100 Amp, complete all as specified and directed.

Replacement of ON LOAD change over switch 415 volt sheet metal enclosure 4 pole of capacity 200 Amp, complete all as specified and directed.

Dismantling and refixing the complete unit of new solar water heater Plate(set of 4) of capacity 300 LPD installed at various sites complete all serviceable accessories including repairing/replacing all defective parts such as water tank, nuts, bolts, washers, drain plug, cleaning tanks, defective tubesand all other minor accessories as required at site including painting the solar water heater water tank by rubbing the old paint and applying with two coats of synthetic enameled paint by spray painting where necessary and testing the same after repair all as specified and directed by Engineer-in Charge.

Dismantling and refixing the complete unit of new solar water heater Plate(set of 4) of capacity 500 LPD installed at various sites complete all serviceable accessories including repairing/replacing all defective parts such as water tank, nuts, bolts, washers, drain plug, cleaning tanks, defective tubesand all other minor accessories as required at site including painting the solar water heater water tank by rubbing the old paint and applying with two coats of synthetic enameled paint by spray painting where necessary and testing the same after repair all as specified and directed by Engineer-in Charge.

Dismantling and refixing the complete unit with new solar heating plates (set 0f 10) system 1000 LPD capacity including , drain plug, cleaning tanks, defective tubes and painting with two coats of synthetic enamelled paint by spray painting heat collector copper strips and cleaning the collector tank complete system including testing the same after repair all as specified and directed by Engineer-in Charge.

Supply & fixing the following items/spares in replacement for solar heaters of various capacities as mentioned in 45, 46 & 47 here-in-before all as specified :-

(a) Heating element of capacity upto 2 KW (Electric rod) having rubber washer of size 1 ¼” or 1 ½” complete all as specified.

(b) Heating element of capacity upto 1.5 KW (Electric rod) having rubber washer of size 1 ¼” or 1 ½” complete all as specified.

(c) Glycol (Anti freezing solution) for filling in copper tubes complete all as specified.

(d) Dead flange with nut, bolts and washers complete all as specified.

(e) Float valve assembly 15mm dia complete all as specified.

(f) Thermostat suitable for solar heater complete all as specified

(g) Hot water steel tank non stick 2mm thick with ceramic lining of capacity 300 Ltrs each including making necessary connections complete all as specified. Make : Surya Shakti / TATA BP or equivalent.

(h) Hot water steel tank non stick 2mm thick with ceramic lining of capacity 1000 Ltrs each including making necessary connectionscomplete all as specified Make : Surya /Shakti, TATA BP or equivalent.

Supply and fixing GI Socekt of Havey grade with and including jointing meterial and taking out old unserviceable socket complete all as specified and directed of following sizes :- Make : Make : Jindal / TATA / Prakash Tubes

(a) 50 mm bore

(b) 40 mm bore

(c) 25 mm bore

(d) 20 mm bore

(e) 15 mm bore

Supply and fixing GI Elbow of Havey grade with and including jointing meterial and taking out old unserviceable Elbow complete all as specified and directed of following sizes :- Make : Make : Jindal / TATA / Prakash Tubes

(a) 50 mm bore

(b) 40 mm bore

(c) 25 mm bore

(d) 20 mm bore

(e) 15 mm bore

Supply and fixing GI Union of Havey grade with and including jointing meterial and taking out old unserviceable Union complete all as specified and directed of following sizes :- Make : Make : Jindal / TATA / Prakash Tubes

(a) 50 mm bore

(b) 40 mm bore

(c) 25 mm bore

(d) 20 mm bore

(e) 15 mm bore

(a) 3 pole contactor for star Delta connection, AC operated suitable for 20-32 amp range, 415 V Make : L&T, Havells, ABB, C&S

(b) 3 pole contactor for star Delta connection, AC operated suitable for 12-18 amp range, 415 V Make : L&T, Havells, ABB, C&S

(c) Thermal overload relay suitable for 12-32 Amp contactor range, 415V Make : L&T, Havells, ABB, C&S

(d) Single Phase preventer suitable for 5HP to 15 HP Motor Make : L&T, Havells, ABB, C&S

Replacement of MCCB 200 Amps 4 Pole 36 KA, Fixed Thermal and fixed magnetic setting fixed in existing panel and connected to told existing cable including necessary fixing arrangement lugs, glan etc complete including takiing down old all as specified and as directed. Make : Havells/Standard/ABB/Havells

Replacement of MCCB 160 Amps 4 Pole 36 KA, Fixed Thermal and fixed magnetic setting fixed in existing panel and connected to told existing cable including necessary fixing arrangement lugs, glan etc complete including takiing down old all as specified and as directed. Make : Havells/Standard/ABB/Havells

Replacement of MCCB 100 Amps 4 Pole 16 KA, Fixed Thermal and fixed magnetic setting fixed in existing panel and connected to told existing cable including necessary fixing arrangement lugs, glan etc complete including takiing down old all as specified and as directed. Make : Havells/Standard/ABB/Havells

Replacement of MCCB 63 Amps 4 Pole 16 KA, Fixed Thermal and fixed magnetic setting fixed in existing panel and connected to told existing cable including necessary fixing arrangement lugs, glan etc complete including takiing down old all as specified and as directed. Make : Havells/Standard/ABB/Havells

Supply & Fixing MCB SPN 40 Amps 'C' series 240V 50Hz 10 KA suitable for lighting and other domestic loads complete including taking down all as specified and directed by Engr-in-charge. Make : C&S, Havells, Indoasian, ABB

Supply & Fixing MCB TPN 63 Amps 'C' series 415V 50Hz 10 KA suitable for lighting and other domestic loads including taking down all as specified and directed by Engr-in-charge.

Material & Labour in replacement for Earthing complete with galvanised steel earth plate electrode of size 600x600x6mm thick burried in a pit to a depth of 2.25mtrs below ground level with top edge of earth plate at a depth of not less than 1.50 meters below ground level, earth plate packed on all sides with charcol dust mixed with salt to a thickness of 15cm,.Connected with earthing lead of 32mmx6mm strip galvanised iron, watering pipe 20mm dia light grade and water filling funnel and mess complete all as shown in plate No 4 of MES schedule part II to the earthing test point, Including PCC Work complete all as specified and as directed by the Engr-in Charge.

Cutting the CI/DI pipes and reducing the required length before laying for inserting of new CI specials such as Tees/Reducers/Tail pieces/collers/sluice valve/Air release valve etc complete for the following:- Note :- CI specials and earth work will be measured and paid for seperately.

(a) 100 mm bore

Specials of Ductile iron / Cast Iron fittings for spigot and socket / flanged pipe such as bends (any type radius and angle) tapers any type (straight, bends) tee, joint piece single branch, Y junction, double branch, cross (all socket or socket and spigot or all flanged ends) collar, caps and plug, connecting piece one end flanged and other socketed or spigot and bell mouth complete of the following sizes all as specified and as directed. 1. The fittings shall be as per IS1538-1989 2. The joints shall be measured and paid separately.

(a) upto 150 mm bore

M/S MAHALUXMI BUILDERS (BID ID -3154918)