SPECIAL REPAIR ORS MD ACCN OF BLOCK NO. 61 (18 QTRS) AT ZORAWAR ENCLAVE (SF ACCN) IN AYODHYA CANTT UNDER AGE (I) AYODHYA CANTT.

Dismantling brick tiles any size laid bedded and pointed in any mortar, complete all as specified and as directed.

Taking out/demolition of mud in roofs any thickness and in any position and leaping over roof terrace ,removing the demolished material to a distance exc 250 m & n exc 500 m and depositing where directed at a level n exc. 1.5 m above starting point, complete all as specified and as directed.

M&L for PCC 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) in roof padding finishing the surface fair & even, complete all as specified and as directed.

M&L for water proofing treatment to roof surface with APP water proofing membrane 3mm thick & weighing not less than 3.00 Kg/Sqm of approved make, black finish and reinforced with non woven polyester matt of min 150 gm/sqm laid over a coat of bitumen oil based primer conforming to IS-3384 @ 0.4 Ltr/Sqm over prepared roof surface, forcing overlap with a propane or a butane gas torch with a overlap of 75mm at sides & 100 mm at ends & sealing as per manufacturer instruction over and including two coat of aluminium paint complete all as specified and directed. Note : (i) Height of bldg upto 10 mtr. (ii) Water proofing treatment shall be carried out through approved manufacturer.

M&l screed bed 10 mm thick in cement mortar 1:3 over roof slab finished even & fair complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

M&L for Coloured Non - Skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed.

M&L for Coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bedding in cement mortar (1:6) complete all as specified and as directed.

M&L for Coloured Non - Skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical surface, skirting, dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

M&L for Coloured Glazed ceramic tiles in vertical surface of size 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and incl 10mm thick plaster in cement mortar (1:4) complete all as specified and directed.