Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.4 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹6.7 L+₹29,412 (4.60%)Rejected-AOC | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | SIVA SASVANTH ELECRICAL ENGINEERING L1 | KAVIN ELECTRICAL ENGINEERING L2 |
|---|---|---|---|---|---|
| 1.01 | Anna Nagar ulavarsanthai SPS 20HP submersible motor
Isolation of well and dewatering with safety measure include of 20 HP Sewage submersible motor from well | 1 | No | 5,788.4 ₹5,788.4 Lowest | 6,054.7 ₹6,054.7 |
| 2.01 | Removing of stator winding from core ,cleaning using thinner, providing separate insulation materials and rewinding the stator coil using suitable copper enamel wire | 1 | No | 21,936 ₹21,936 Lowest | 22,945.1 ₹22,945.1 |
| 3.01 | Removing of top side mechanical oil seal in bottom chamber, Supply and fixing of new mechanical oil seal in bottom chamber and checking oil pressure using special equipment | 1 | No | 13,473 ₹13,473 Lowest | 14,092.8 ₹14,092.8 |
| 4.01 | Removing of bottom side mechanical oil seal, Supply and fixing of new bottom side mechanical oil seal in and checking oil pressure using special equipment. | 1 | No | 19,146.6 ₹19,146.6 Lowest | 20,027.3 ₹20,027.3 |
| 5.01 | Removing of old top side ,Bottom side bearings ,supply and fixing of new bearing using suitable puller | 1 | No | 19,760.4 ₹19,760.4 Lowest | 20,669.4 ₹20,669.4 |
| 6.01 | Replacement of motor and pump side O-rings in suitable sizes | 1 | No | 948.1 ₹948.1 Lowest | 991.7 ₹991.7 |
| 7.01 | Supply and fixing of motor Terminal block and Suitable Lugs | 1 | No | 548.9 ₹548.9 Lowest | 574.1 ₹574.1 |
| 8.01 | Dynamic balancing of shaft with impeller | 1 | No | 2,994 ₹2,994 Lowest | 3,131.7 ₹3,131.7 |
| 9.01 | Replacement of coolant oil in oil chamber using grade100/120 | 10 | LTRS | 139.7 ₹1,397 Lowest | 146.1 ₹1,461 |
| 10.01 | Re Fixing ,Assembling of motor and pumps ,checking necessary connections ,painting ,and commissioning on load | 1 | NO | 5,988 ₹5,988 Lowest | 6,263.4 ₹6,263.4 |
Tender Value
₹6.5 L
EMD Value
₹6,487
Closing Date
17 Sept 2025, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Commissioner Madurai Corporation
Aringar Anna Maligai, Thallakulam, Madurai.
Madurai Corporation drainage pumping station motor repair work at various places in zone 2
2025_MAWS_600685_1
E2 / EST. 170 / 25-26
Open Tender
Civil Works
Lump-sum
Madurai
Please refer Tender documents.
1 document required · 1 mandatory
₹0
₹6,487
23 Feb 2026
9 Sept 2025
17 Sept 2025
9 Sept 2025
17 Sept 2025
9 Sept 2025
Amount
Anna Nagar ulavarsanthai SPS 20HP submersible motor Isolation of well and dewatering with safety measure include of 20 HP Sewage submersible motor from well
Removing of stator winding from core ,cleaning using thinner, providing separate insulation materials and rewinding the stator coil using suitable copper enamel wire
Removing of top side mechanical oil seal in bottom chamber, Supply and fixing of new mechanical oil seal in bottom chamber and checking oil pressure using special equipment
Removing of bottom side mechanical oil seal, Supply and fixing of new bottom side mechanical oil seal in and checking oil pressure using special equipment.
Removing of old top side ,Bottom side bearings ,supply and fixing of new bearing using suitable puller
Replacement of motor and pump side O-rings in suitable sizes
Supply and fixing of motor Terminal block and Suitable Lugs
Dynamic balancing of shaft with impeller
Replacement of coolant oil in oil chamber using grade100/120
Re Fixing ,Assembling of motor and pumps ,checking necessary connections ,painting ,and commissioning on load
2.Pallavan Nagar liftig station 12.5HP submersible motor Isolation of well and dewatering with safety measure include of 12.5 HP Sewage submersible motor from well
Removing of stator winding from core ,cleaning using thinner, providing separate insulation materials and rewinding the stator coil using suitable copper enamel wire
Removing of top side mechanical oil seal in bottom chamber, Supply and fixing of new mechanical oil seal in bottom chamber and checking oil pressure using special equipment
Removing of bottom side mechanical oil seal, Supply and fixing of new bottom side mechanical oil seal in and checking oil pressure using special equipment.
Removing of old top side ,Bottom side bearings ,supply and fixing of new bearing using suitable puller
Replacement of motor and pump side O-rings in suitable sizes
Supply and fixing of motor Terminal block and Suitable Lugs
Supply and fixing of motor profile Gasket
Replacement of coolant oil in oil chamber using grade100/120
Re Fixing ,Assembling of motor and pumps ,checking necessary connections ,painting ,and commissioning on load
3.Mattuthavani sps 12HP submersible motor Isolation of well and dewatering with safety measure include of 12HP Sewage submersible motor from well
Removing of stator winding from core ,cleaning using thinner, providing separate insulation using replace lugs
Removing of top side mechanical oil seal in bottom chamber, Supply and fixing of new mechanical oil seal in bottom chamber and checking oil pressure using special equipment
Removing of bottom side mechanical oil seal, Supply and fixing of new bottom side mechanical oil seal in and checking oil pressure using special equipment.
Removing of old top side ,Bottom side bearings,supply and fixing of new bearing using suitable puller
Replacement of motor and pump side O-rings in suitable sizes
Supply and fixing of motor profile Gasket
Replacement of coolant oil in oil chamber using grade100/120
Re Fixing ,Assembling of motor and pumps ,checking necessary connections,painting,and commissioning on load
4.Thathaneri 15HP submersible motor Isolation of well and dewatering with safety measure include of 15HP Sewage submersible motor from well
Providing shaft cotter pin ss nut, shaping work in shaft,making new hole arrangements for water dome with new hallen keys
Removing of top side mechanical oil seal in bottom chamber, Supply and fixing of new mechanical oil seal in bottom chamber and checking oil pressure using special equipment
Removing of bottom side mechanical oil seal, Supply and fixing of new bottom side mechanical oil seal in and checking oil pressure using special equipment.
Removing of old top side ,Bottom side bearings,supply and fixing of new bearing using suitable puller
Replacement of motor and pump side O-rings in suitable sizes
Supply and fixing of motor Terminal block and Suitable Lugs
Supply and fixing of motor profile Gasket
Replacement of coolant oil in oil chamber using grade100/120
Re Fixing ,Assembling of motor and pumps ,checking necessary connections,painting,and commissioning on load
5.Thathaneri 10HP submersible motor Isolation of well and dewatering with safety measure include of 10HP Sewage submersible motor from well
Removing of top side mechanical oil seal in bottom chamber, Supply and fixing of new mechanical oil seal in bottom chamber and checking oil pressure using special equipment
Removing of bottom side mechanical oil seal, Supply and fixing of new bottom side mechanical oil seal in and checking oil pressure using special equipment.
Removing of old top side ,Bottom side bearings,supply and fixing of new bearing using suitable puller
Replacement of motor and pump side O-rings in suitable sizes
Supply and fixing of motor Terminal block and Suitable Lugs
Supply and fixing of motor profile Gasket
Replacement of coolant oil in oil chamber using grade100/120
Re Fixing ,Assembling of motor and pumps ,checking necessary connections,painting,and commissioning on load
6.Vilangudi SPS 10HP submersible motor Isolation of well and dewatering with safety measure include of 10 HP Sewage submersible motor from well
Removing of stator winding from core ,cleaning using thinner, providing separate insulation materials and rewinding the stator coil using suitable copper enamel wire
Removing of top side mechanical oil seal in bottom chamber, Supply and fixing of new mechanical oil seal in bottom chamber and checking oil pressure using special equipment
Removing of bottom side mechanical oil seal, Supply and fixing of new bottom side mechanical oil seal in and checking oil pressure using special equipment.
Removing of old top side ,Bottom side bearings ,supply and fixing of new bearing using suitable puller
Replacement of motor and pump side O-rings in suitable sizes
Supply and fixing of motor Terminal block and Suitable Lugs
Supply and fixing motor cable
Replacement of coolant oil in oil chamber using grade100/120
Re Fixing ,Assembling of motor and pumps ,checking necessary connections ,painting ,and commissioning on load
7.Aruldosspuram SPS 10HP submersible motor Isolation of well and dewatering with safety measure include of 10 HP Sewage submersible motor from well
Removing of stator winding from core ,cleaning using thinner, providing separate insulation materials and rewinding the stator coil using suitable copper enamel wire
Removing of top side mechanical oil seal in bottom chamber, Supply and fixing of new mechanical oil seal in bottom chamber and checking oil pressure using special equipment
Removing of bottom side mechanical oil seal, Supply and fixing of new bottom side mechanical oil seal in and checking oil pressure using special equipment.
Removing of old top side ,Bottom side bearings ,supply and fixing of new bearing using suitable puller
Replacement of motor and pump side O-rings in suitable sizes
Supply and fixing of motor Terminal block and Suitable Lugs
Supply and fixing motor cable
Replacement of coolant oil in oil chamber using grade100/120
Re Fixing ,Assembling of motor and pumps ,checking necessary connections ,painting ,and commissioning on load
8.Aruldosspuram SPS 7HP submersible motor Isolation of well and dewatering with safety measure include of 10 HP Sewage submersible motor from well
Removing of stator winding from core ,cleaning using thinner, providing separate insulation materials
Removing of top side mechanical oil seal in bottom chamber, Supply and fixing of new mechanical oil seal in bottom chamber and checking oil pressure using special equipment
Removing of bottom side mechanical oil seal, Supply and fixing of new bottom side mechanical oil seal in and checking oil pressure using special equipment.
Removing of old top side ,Bottom side bearings ,supply and fixing of new bearing using suitable puller
Replacement of motor and pump side O-rings in suitable sizes
Supply and fixing of motor Terminal block and Suitable Lugs
Supply and fixing motor cable
Replacement of coolant oil in oil chamber using grade100/120
Re Fixing ,Assembling of motor and pumps ,checking necessary connections ,painting ,and commissioning on load
Add GST 18%
KAVIN ELECTRICAL ENGINEERING (BID ID -1461766)
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .