Ireps

Active

Goods

Procurement of Feeder wire splice (150),SS wire end fitting RI no 5341 and Dropper making jig

Konkan Railway Corporation Limited

Ratnagiri, Maharashtra

Amount: Refer DocsCloses: 27 Aug 20263d left

Timeline

Published17 Aug 2026
Closes27 Aug 2026

Tender Value

Refer Docs

Closing Date

27 Aug 2026, 3:00 pm3d left

Bidding Terms

Bidding System

Single Packet

Tender Mode

Normal Tender

Pre-Bid Conference

Evaluation Criteria

Itemwise/Consigneewise

Ranking Order

Lowest to Highest

Inspection Agency

TPI Agency

Approving Agency

Not Applicable

Contract Category

Expenditure

Item Category

General

Tendering Section

Eligibility Criteria

1 condition

Special Eligibility Criteria

1
Item ID 3100652005 and 3100626 respectively : Approved vendors for item ID 3100652005 and 3100626 are eligible to participate for respective items. a. A conditionally approved supplier with the clear stipulation that in case they have received any order form Railways and their sample has been approved by RDSO before the date of tender opening then only they shall be considered for the placement of P.O. Railways reserve the right to place entire/bulk order on RDSO approved sources for the item tendered. RDSO Approval status shall be reckoned as on the date of tender opening and not thereafter, unless it is a case of removal /suspension/banning c. The offer of RDSO approved Supplier for the item Feeder wire splice (150) complete with all accessories RDSO item ID 3100652005 and SS wire end fitting RI no 5341 AL Bronze with wedge RDSO item ID 3100626 .
Document optionalConfirmation required

Compliance & Declarations

15 conditions · 2 needing a document upload

Check List

1
Inspection : By RDSO for item Feeder wire splice (150) complete with all accessories RDSO Item ID 3100652005 and SS wire end fitting RI no 5341 AL Bronze with wedge RI no 5321 RDSO Item ID 3100626. Inspection by consignee of item Dropper making jig and wire straightener for 7 mm dia dropper wire against GC and TC
2
Unloading of Material : By Firm

Commercial-Compliance

1
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Document optional
2
Firm should enclose MSME/NSIC certificate if any with category like SC/ST/NT general etc. to avail the MSME/NSIC benefit.
Document required
3
Firm should enclose RDSO approved letter copy and latest copy of P.O. Along with their offer.
Document required

Bid Responsiveness

3 conditions

1
Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted.
2
Payment Terms: No deviation from the Payment Terms stipulated in the tender is permitted.
3
Delivery Period: No deviation from the Delivery Period stipulated in the tender is permitted.

Delivery Locations

1 location across Maharashtra · 251 Numbers total

DYCMM RATNAGIRIMaharashtra

251 Numbers

Delivery & Payment Terms

F.O.R

Destination

Delivery Period

Item - Feeder wire splice (150) complete with all accessories asper RDSO Spec. No. TI/SPC/OHE/Fittings/0130-10/13-Rev-1 or latest and RDSO Drg no. TI/DRG/OHE/FTGNFRDSO/00003/03/0 or latest including part nos. 1101 11021103 1104
Consignee: DYCMM RATNAGIRI — Commencement : Within 30 Days of issue of Contract, Completion : Within 60 Days
Item - SS wire end fitting RI no 5341 AL Bronze with wedge RI no5321 as per RDSO drg. no ETI/OHE/P/5341 Rev A orlatest and TI/DRG/OHE/ATD/RDSO/00002/99/4 Rev D orlatest used for ATD from approved vendors
Consignee: DYCMM RATNAGIRI — Commencement : Within 30 Days of issue of Contract, Completion : Within 60 Days
Item - Dropper making jig and wire straightener for 7 mm diadropper wire. Note- Drawing of item will be submitted torailway for approval before supply. Make Mahavir IM IEP orother approved make
Consignee: DYCMM RATNAGIRI — Commencement : Within 30 Days of issue of Contract, Completion : Within 60 Days

Payment Terms

100% payment against receipt, inspection and acceptance of material by the consignee at destination.

Statutory Variation Clause

Statutory Variation in taxes and duties, or fresh imposition of taxes and duties by State/ Central Governments in respect of the items stipulated in the contract (and not the raw materials thereof), within the original delivery period stipulated in the contract, or last unconditionally extended delivery period shall be to Railways' account. Only such variation shall be admissible which takes place after the submission of bid. No claim on account of statutory variation in respect of existing tax/duty will be accepted unless the tenderer has clearly indicated in his offer the rate of tax/duty considered in his quoted rate. No claim on account of statutory variation shall be admissible on account of misclassification by the supplier/ contractor.

Option Clause

The purchaser shall be entitled to vary the order quantity upto +/- 30% anytime within the delivery period (including extended delivery period) on the same terms and conditions. The increase in quantity with respect to the tender quantity can be done even at the time of ordering and the tenderer shall be bound to accept the quantity so ordered on the basis of his original offer. The purchaser shall be entitled to exercise +/- 30% option clause in one or more than one instalment as long as the total variation in quantity does not exceed the limit of 30% of ordered quantity.

Standard Governing Conditions

IRS Conditions of Contract: The contract shall be governed by latest version (along with all correction slips) of IRS conditions of contract, and all other terms and conditions incorporated in the tender documents.
General Conditions of Contract: The contract shall be governed by latest version (along with all correction slips) of General Conditions of Contract, and all other terms and conditions incorporated in the tender documents.

Work Description

Procurement of Feeder wire splice (150),SS wire end fitting RI no 5341 and Dropper making jig

Tender Information

Tender ID

3226D0061~KRCL

Reference Number

3226D0061

Tender Type

Limited - Indigenous

Form of Contract

Goods

Location

Ratnagiri, Maharashtra

Source Website

Subscribe to view

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

Exempted

Important Dates

Last Activity

17 Aug 2026

Published

17 Aug 2026

Items & Quantities

3 items · 251 Numbers total

PL 40220001Goods (Y)

Feeder wire splice (150) complete with all accessories asper RDSO Spec. No. TI/SPC/OH E/Fittings/0130-10/13-Rev-1 or latest and RDSO Drg no. TI/DRG/OHE/FTGNFRDSO/00003/03/0 or latest including part nos. 1101 11021103 1104 [ Warranty Period: 30 Months after the date of delivery ] ]

Inspection Agency: TPI Agency
Stock Type: Non Stock
Considered for Evaluation: Yes

Delivery Location	State	Quantity
DYCMM RATNAGIRI	Maharashtra	90.00 Numbers
Total		90 Numbers

PL 42900033Goods (Y)

SS wire end fitting RI no 5341 AL Bronze with wedge RI no5321 as per RDSO drg. no ETI /OHE/P/5341 Rev A orlatest and TI/DRG/OHE/ATD/RDSO/00002/99/4 Rev D orlatest used for ATD from approved vendors [ Warranty Period: 30 Months after the date of delivery ] ]

Inspection Agency: TPI Agency
Stock Type: Non Stock
Considered for Evaluation: Yes

Delivery Location	State	Quantity
DYCMM RATNAGIRI	Maharashtra	160.00 Numbers
Total		160 Numbers

PL 47900026Goods (Y)

Dropper making jig and wire straightener for 7 mm diadropper wire. Note- Drawing of it em will be submitted torailway for approval before supply. Make Mahavir IM IEP orother approved mak e [ Warranty Period: 30 Months after the date of delivery ] ]

Inspection Agency: TPI Agency
Stock Type: Non Stock
Considered for Evaluation: Yes

Delivery Location	State	Quantity
DYCMM RATNAGIRI	Maharashtra	1.00 Numbers
Total		1 Numbers

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

HTML

NIT Documents

nit.pdf

NIT

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].