SPL REPAIR TO BLDG NO T-01 AT (SOWC) UNDER GE (EAST) MATHURA

Amount

Dismantling of 6 mm thick AC corrugated or semi-corrugated sheets in roof covering including ridges, hips, valleys and flashings etc Complete all as specified and directed.

Dismantling of Single layer Mangalore pattern or similar tiles in roofing including ridges, hips, valleys and flashings etc Complete all as specified and directed.

Dismantling timber scantlings (framed work) exc 40 Sq Cm in section, in any position Complete all as specified and directed.

M&L for Mild steel work in tubular trusses, purlins, vetical posts including special shaped washer, angle cleats, fish plates, gusset plates, base/ bearing plates, bolts and nuts etc. complete using ERW or induction butt welded tubes conforming to 1161-1979 grade st 240 Complete all as specified and directed.

M&L Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws Complete all as specified and directed.

M & L pre- painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in ridges/valley gutters, fixed with self tapping screw Complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets Complete all as specified and directed.

S&F 605x605mm of grid GI frame work for seamless ceiling comprising of GI perimeter chennel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm susoended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.5mm fixed to the intermediate channel at 457mm centre to centre including Hangers 6mm dia GI (upto 1200mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flate 40X30mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified inluding Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions Complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) n. exc 1.5 Sqm each Complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) exceeding 1.5 Sqm each but n.exc. 4 sqm each Complete all as specified and directed.

Demolition of brick work or stone masonry or solid concrete masonry built in cement mortar including pillar etc. Complete all as specified and directed.

M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in Modular bricks in CM 1:6 Complete all as specified and directed.

Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc. Complete all as specified and directed.

M&L rendering 15mm thick on fair face of brick brick work or concrete surface in cement mortar 1:4 mexed with liquid WPC @ 200 ml / 50 KG of cement or as per manufactures Instructions and finishing surface even & fair complete all as specified and as directed. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

M&L rendering 15 mm thick on other than fair faces of brick surfaces or concrete surfaces and finished surfaces even & fair in CM 1:6 Complete all as specified and directed.

Supply only liquid water proofing compound Complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises Complete all as specified and directed.

S&F Vitrified Ceramic tiles 10 mm thick (square/ rectagular) polished,area of each tiles exceeding 0.36 sqm but n.exc 0.72 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and incl 15 mm thick screed bed or bedding layer in CM 1:4 Complete all as specified and directed.

S&F Vitrified Ceramic tiles 10 mm thick (square/ rectagular) polished,area of each tiles exceeding 0.36 sqm but n.exc 0.72 Sqm, as on walls/ skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 10mm thick rendering in CM 1:3. Complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar Complete all as specified and directed.

M&L for 18-20mm thick machine cut machine polished kota stone slab flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed or bedding layer in cement mortar 1:3 Complete all as specified and directed.

M&L for 18-20mm thick Machine cut Machine polished kota stone slab as in riser of steps, skirting, dado and pillar jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and incl 10mm thick plaster in cement mortar 1:3 complete Complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thick, including removing rubbish off the premises complete all as directed

M&L for PCC type B1 1:2:4 (using 20mm graded stone aggragate) as in coping surface channels, benchings etc of manholes finished fair and even Complete all as specified and directed.

S&F Pressed steel frame 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., Complete all as specified and directed.

M&L Cement concrete Type C0, M-10 Grade, 1:3:6 (12.5 mm graded aggre-gate) as in filling to chowkhats Complete all as specified and directed.

S&F 35mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type both face covered with decorative face veneer with lipping/frame to match on both sides Complete all as specified and directed.

M&L for Aluminium frame for doors/ window/ ventilators and grill (sliding, fixed or casement) powdercoated (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

M&L Powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) Complete all as specified and directed.

S&F aluminium partition wall of section as in frame /single double grove of size 63.5 x 38.1 x 2mm thick of make Jindal or equivalent including 5 mm thick tinted glass , 20 mm thick pre-laminated particle board with all necessary fittings. Vertical section has to be supported with angle of size 65 x 65 x 6 mm thick including making good of existing surface Complete all as specified and directed.

S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in position Complete all as specified and directed.

S&F Mortice lock vertical type of mild steel 4 levers of size 100mm Complete all as specified and directed.

Taking down 12 mm thick toughen glass door shutter area exc 2 Sqm but n.exc 4 Sqm each, adjustment, greasing & oiling of floor door spring refixing the door in same opening and making the door for smooth function Complete all as specified and directed.

S&F in repair stainless steel lock fixed to toughen glass door shutter, horizontal type, 4 levers, Complete all as specified and directed.

M&L for 5 mm thick sheet glass tinted quality and glazing with aluminium beading n exc in each pane complete all as specidfied and as directed.

S & F frame work such as grills , gratings etc with ends of bars shoulderd and / or rivetted or forged into spikes framed guard bars etc confirming to FE 290 GDE E-165 Complete all as specified and directed.

S&F 150mm long Aluminium, anodised, barrel tower bolts of extruded section Complete all as specified and directed.

S&F 150mm long Aluminium handles, cast type, anodised Complete all as specified and directed.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed Complete all as specified and directed.

M&L for providing damp proof layer in two coats of acrylic polymer coating consisting of 1 part of acrylic polymer liquid mixed with 2 parts of cementious powder applying at the rate of 1.40 Sqm/ Kg of mix per coat. Second coat should be applied after 4-6 hrs of first coat, 5 days curing is to be carried out to the surface before providing plastering Complete all as specified and directed. Note : Make of the material 'Smart Care damp block 2K' of Asian paints or equivalent from Dr Fixit, STP, CICA etc. as approved.

M&L for preparation of new plastered surface of walls and applying two coats of oil bound distemper over a coat of Alkali resistant primer over a coat of cement base wall care putty not less than 1mm thick complete all as specified and as directed.

M&L for Providing 1 mm thick wall care putty on surfaces of wall complete all as specified and as directed.

M&L for complete removal of existing treatment from old plastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint white or tinted over a coat of primer complete all as specified and as directed.

M&L for preparing old plastered surfaces of walls/ ceilings and applying one coats of cement base paint including required scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for complete removal of existing treatment from old plastered surfaces of walls and applying two coats of cement base paint including required scaffolding, trestles, ladders, cradles and necessary safety measures Complete all as specified and directed.

M&L Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer Complete all as specified and directed.

M&L for preperation of old steel surfaces of any description over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth not otherwise described and applying two coat of synthetic enamel paint over and including a coat of primer Complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint Complete all as specified and directed.

M&L for grinding and treating the surface with beeswax polishing of old stone flooring complete as and upto required level Complete all as specified and directed.

M&L for Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M & L for 50 mm thick plain cement concrete 1:3:6, type C1 (using 20 mm graded stone aggregate) as in plinth protection surfaces finished even and smooth without using extra cement including filling the joints by bitumen and sand mixed in the ratio 1:4 by weight Complete all as specified and directed.

M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors Complete all as specified and directed.

Taking down carefully aluminum/copper point wiring (light ,fan, socket any type, power, bell etc. ) complete including fixtures & fittings (such as ceiling rose, socket, Pendent, regulator, light fitting etc) and removing the material from site and making good the disturbed surfaces of walls ceiling etc complete all as specified and directed. (Note: Credit for above items should be made as per credit Schedule separately)

M&L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd) and its all accessories complete concealed in wall incl cutting & chases (making good all to the disturbed surfaces as per existing) including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5 Sqmm size in green colour complete all as specified in current SSR Part-I & II & complete all as specified and directed, as described below:-

One light point/Fan point controlled by one switch 5 amp.

One 3 pin socket outlet 5 amps point controlled by one switch on same board.

One 3 pin socket outlet 5 amps point controlled by one switch, Independent board.

All as per item No.56 here-in-above but for 3 pin/ 5 pin, sockets outlet,15 amps with 4.0 sqmm PVC insulated & unsheathed (FRLS) cable, independent, Point wiring complete all as specified and directed.

M&L ceiling rose, PVC / polycarbonate, isolated body 65mm x 50mm three terminals complete all as specified and directed.

S&F switch piano, flush type single pole, one way 5 amps complete all as specified and directed.

S&F switch piano, flush type single pole, one way 15 amps complete all as specified and directed.

S&F socket outlet 2-in-1, 3 pin, 6 amps, 2 module complete all as specified and directed.

S&F socket outlet 2-in-1, 3 pin, 5/15 amps, 2 module complete all as specified and directed.

S&F Fan Regulator, step type, electronic , 2 module, complete all as specified and directed.

S&F Lamp holder, PVC/ Polycarbonate type with back plate suitable for batten complete all as specified and directed.

Supply & fixing in repair indoor decorative ultra slim surface / wall mounted LED batten tube light complete fitting 1x 20 watt LED Tube fitting with aluminium channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

Supply & fixing in repair indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light complete fitting 1x10 watt LED Tube fitting (size within 600x25x40 mm) suitable for mirror light with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K,>100Lm/Watt,warm white/ cool white/natural white complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

M&L for building security light bracket made out of 40mm dia light grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubular pole including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts including two coats of aluminium paint over a coating of red oxide primer including taking down old unserviceable bracket as scrap any size/description complete all as specified and directed.

Taking down of MCB DBs/ sheet metal enclosure with MCB's/MCCB's complete all as specified and directed.

S&F MCB distribution board, SPN 8 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified and directed.

S&F MCB distribution board, SPN 12 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified and directed.

S&F TP&N Vertical Loadline distribution board, 6 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail ,blanking Plates, cable ties for cable management, 440 V, 6 way complete all as specified including fitting suitable for MCBs and MCCBs with connections complete all as specified and directed. Note:- DB shall be fixed in flush pattern by cutting the wall and making good disturbed surface as pe directed & rate shall be included in the items.

S&F MCCB 4P, 160 Amps, 36kA, with spread terminal complete all as specified and directed.

S&F MCB SPN, 63 Amps, 'C' series, breaking cap 10 kA, 240V in MCB DB complete all as specified and directed.

S&F MCB SPN, 32 Amps, 'C' series, breaking cap 10 kA, 240V in MCB DB complete all as specified and directed.

S&F MCB SP, 5-32 Amps, 'C' series, breaking cap 10 kA, 240V in MCB DB complete all as specified and directed.

S&F MCB SP, 63 Amps, 'C' series, breaking cap 10 kA, 240V in MCB DB complete all as specified and directed.

Taking down the ceiling fan of any sweep carefully from its installed position, dismantling complete with down rod , replacement of capacitor, Rubber wheel bush and cleaning of all dust, applying grease for bearings, reassembling the fan and blades, painting of fans and down rod with synthetic enamel white paint by spraying including filling cavities with filler, writing MES No. with black paint, and keeping a side safely and replacement of suitable length down road and rubber reel complete and hanging / refixing in position and connecting up including provision of 3 core twisted flexible copper conductor cable of 0.75 Sqmm from ceiling rose to connector of fan and testing on complete all as specified and directed.. NOTE:- The spare parts Capacitor & Rubber wheel bush shall be included in the quoted rate.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed.

Cutting holes for air ducting of exhaust fan in Circle / square shape or as per site and making good to the disturbed surfaces complete all as specified and directed.

Taking down carefully by Submain wiring/ service connection of any type and making good the disturbed surfaces of walls etc complete all as specified and directed.

M & L for Sub Main wiring with two runs single core 4 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases (making good all to the disturbed surfaces as per existing) with and including 4 sqmm copper green colour earth wire complete all as specified and directed. Note: Two runs of 4 sq mm (P&N), one run of 4 sqmm earth wire & One run of PVC conduit will be measured as one RM.

M & L for Sub Main Wiring with two runs single core 10 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 25mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) with and including 10 Sqmm copper green colour earth wire complete all as specified and directed. Note: Two runs 10 Sq mm (P&N), one run of 10 Sq mm earth wire & One run of PVC conduit will measured as one RM.

M&L for Sub Main Wiring with four runs single core 10 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 25mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) with and including 10 Sqmm copper green colour earth wire complete all as specified and directed. Note:- four runs 10 Sq mm (P&N), two run of 10 sq mm earth wire & One run of PVC conduit will measured as one RM.

M & L for Sub Main Wiring with four runs single core 25 sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 25mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases (making good all to the disturbed surfaces as per existing) with and including 25 Sqmm copper green colour earth wire complete all as specified and directed. Note:- four runs 25 Sq mm (P&N), two run of 25 Sq mm earth wire & One run of PVC conduit will measured as one RM.

Supply and fix Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB of rating 20 Amps, 'C' series. 240 Volts with all connection complete all as specified and directed.

Taking down of Electric energy meter and refixing in panel with all electrical connection complete all as specified and directed.

Supply and Install Factory assembled hut type double door type with cable alloy outdoor LT panel suitable for 3 phase, fabricated out of CRCA sheet 3.15mm thick MS sheet tapered, drip proof, top extended 100 mm on all sides including MS angle iron base frame of size 50x50x6mm thick duly welded with the following mountings/accessories & having individual compartment for switch gear connected and inter conneciton and painting with epoxy based primer and two coats of synthetic enamel paint with control wiring and locking arrangement etc complete with PCC Foundation work. Incoming:- (a) Busbar aluminium - 400 Amps -04 Nos (b) MCCB, 4Pole, 250 Amp, 36 kA -01 Nos (c) Blank space box with back plate (width 500 mm x Height 600 mm) for fixing of three phase smart Meter CT operated (d) Incoming RYB phase LED indicator with digital ampmeter and voltmeter (e) On Load changeover switch,4P, 250 Amps - 01 Nos Outgoing:- (e) MCCB 160 Amp - 02 Nos (f) MCCB 100 Amp - 02 Nos (g) MCB SPN 63 Amps - 06 Nos

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core, laid in trenches / duct / fixing on walls / poles or passing through HDPE double wall corrugated pipe (outer dia should not be less then 40 mm) including connecting with suitable lugs, glands, nuts and bolts in existing Panel from pole / Main Panel Box and testing complete all as specified and directed. Note:- HDPE pipe rate shall be deemed in quoted rate above.

All as per item No. 91 above but XLPE cable size 3.5 x 95 sqmm,

Excavation in trenches in soft/loose soil not exceeding 1.5 mtr in depth and not exceeding 1.5 mtr wide for laying of cables and getting out complete all as specified and directed.

Removal of excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.

Returning, filling in including spreading, levelling,watering and well ramming excavated soil in layers not exceeding 25 cm thick each , filling back in trenches after cables have been laid and tested complete all as specified and directed.

ARCHI ENGINEERS (BID ID -3064110)

shyam construction (BID ID -3072021)

M/S YATENDRA SINGH (BID ID -3070553)

ASHISH SHARMA (BID ID -3063839)

Ms Kamal Kant Agarwal (BID ID -3072206)

M/s Himgiri construction (BID ID -3063760)

Sethi Brothers (BID ID -3060462)