Estimate for Speical Repair of Gents, Ladies Toilet and Public waiting Hall in Canal Colony, Ferozpur

12.5 mm thick cement plaster 1:5 (CSR 15-15.10)

Plastering on underside of ceiling 10mm thick cement plaster 1:3 (CSR 15-15.43)

Screed of 50mm thick cement concrete 1:8:16 to be laid below the topping using mechanical mixer for mixing of material (CSR 14-14.11)

Providing and laying Rectified Porcelain floor tiles 400x400mm or more (thickness to be specified by the manufacturer) of premium quality conforming to IS:15622 of approved make in all colours laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement : 4 Fine sand) for new flooring complete Rectified tiles have finished edges allowing them to be placed closer together for a narrower grout joint as opposed to other tiles and are more expensive. Unlike typical factory-edged tile, rectified tile is cut to size after the firing process. This process creates a precise, 90 degree angle edge and, as a result, can be laid with a tighter grout joint than un rectified tile. It gives a smooth, sophisticated and continuous look to the floor. Using a rectified tile allows you to place the tiles much closer together using tighter joint spacing. This makes the grout less visible as there is actually less grout used. (CSR 14-14.122)

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 310 x 450 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (CSR 14-14.127)

Door and window frame of size 113mmx60mmx with 35mm wide single rebate (CSR 18-18.51(b)

For shutter area above 0.50 sqm (CSR 17-17.23(ii)

35mm thick (CSR 17-17.27 (a) (iv)

Providing & Fixing decorative high pressure laminated sheet 1mm SF thick with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. (CSR 17-17.89 )

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : 300mm x16mm (CSR 17-17.49-a )

Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint. (CSR 16-16.18 )

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish. (CSR 16-16.65 )

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two or more coats to give an even shade. (CSR 16-16.13 )

Eurpoean/Indian/Orissa W.C., (CSR 30.88-a)

PVC / China Ware Cistern (CSR 30.88-b)

wash Hand Basin/Urinal Pot (CSR 30.88-c)

Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. (CSR 30.94)

Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity (without cistern fitting) size 62x37x67 cm with P trap or S trap and seat cover complete in all respect. (CSR 30-3-a)

With C.P. Brass nut (CSR 30-8-b)

Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) complete in all respect (CSR 30-10-a)

Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete. (CSR 30-16)

Size 550 mm x 400 mm x 815 mm (CSR 30-32-ii)

Size 600mmx450mm (CSR 30-61-a)

C.P. brass Bib cock foam flow without flange (CSR 30-65-a(ii)

Brass Bib cock/Stop cock 15mm x 400gm(CSR 30-65-a(iv)

C.P.brass 15mm Concealed stop cock with flange. (CSR 30-66-b)

Small partitions size 69 x 16.5 x 32.5 cm (CSR 30-21(b-i)

110mm o/d single socket SWR UPVC pipe lines laid complete (CSR 30-74(b-iii)

Making connection with the existing G.I. branch main up to 40mm size pipe including cutting of existing pipe line, threading of pipe lines from both ends and fixing of G.I Tee etc. in the pipe line (including cost of G.I Tee) complete in all respects. (CSR 28-45)

Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) BClass, including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete. CSR 28.35 (b)

Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect. (CSR 30.72)

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled Doors of area 3 sqm and below (CSR 8-8.26 (a)

Scraping Mud Plaster (CSR 8-8.31 (d)

THE CHHIBRANWALI CO OP L AND C SOCIETY LTD