REPAIRS RE CANNING/POLISHING OF WOODEN FURNITURE AT JALIPA MIL STN UNDER GE ARMY BARMER

Amount

SOFA SET 4/5 SEATER FD-281/373 (a) S&F of cushion foam for sofa set size 525x525x100mm, 32 density (Make-Sleepwell) duly covered with best quality tapestry cloth complete all as directed and specified Note:- Rate of tapestry cloth shall not be less than Rs 300/- per RM

(b) M&L for polishing of sofa set 4 seater with high class lekar polish to all exposed surfaces match with existing all as specified and directed.

(c) M&L for polishing of sofa set 5 seater with high class lekar polish to all exposed surfaces match with existing all as specified and directed.

BED PLY WOOD TOP FD-246/247- S&F in repair following parts of bed Ply wood top as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed.: (a) Head rest shall be made as per drg

All as per Srl item No 04 above but Foot Rest shall be made as per drg

All as per Srl item No 04 above but Long rails shall be made of Ist class hard wood (Shisham)

All as per Srl item No 04 above but Short rails shall be made of Ist class hard wood (Shisham)

All as per Srl item No 04 above but Stiffener shall be made of Ist class hard wood (Shisham)

All as per Srl item No 04 above but MS bracket of flat iron 25x3mm,200mm long fixed with screw

All as per Srl item No 04 above but Ply wood top 12mm thick BWR plywood as per existing shape and size in One piece

M&L for polishing of bed Plywood top with high class French polish to all exposed surfaces except top & bottom after preparation of surfaces complete all as specified and directed.

CHAIR DINING FD-16(M)/203/ 279 :- S&F in repair following part of chair dining of 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed :-(a) Rear Legs

All as per Srl item No 12 above but Front Legs

All as per Srl item No 12 above but Side rail of seat frame including drilling holes for weaving (spacing of holes shall be as per existing)

All as per Srl item No 12 above but Front/back rails of seat frame including drilling holes for weaving (spacing of holes shall be as per existing)

All as per Srl item No 12 above but Bottom stiffener

All as per Srl item No 12 above but Back stiffener

M&L for polishing of chair dining with high class French polish to all exposed surfaces except inside of seat frame ( 4 sides) incl matching with new component with old one after preparation complete all as specified and directed.

CHAIR WRITING FD-20(M)/202/280:- S&F in repair following part of chair writing with 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed. :- (a) Rear legs

All as per Srl item No 19 above but Front Legs

All as per Srl item No 19 above but Side rail of seat frame including drilling holes for weaving (spacing of holes shall be as per existing)

All as per Srl item No 19 above but Front/Back rails of seat frame including drilling holes for weaving (spacing of holes shall be as per existing)

All as per Srl item No 19 above but Bottom stiffener

All as per Srl item No 19 above but Back stiffener

All as per Srl item No 19 above but Arm rest

M&L for polishing of chair writing with high class French polish to all exposed surfaces except inside of seat frame (4 sides) incl matching with new component with old one after preparation complete all as specified and directed.

CHAIR EASY FD-17(M)/201 /229:- S&F in repairs following parts of the chair easy with 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed :-(a) Rear Legs

All as per Srl item No 27 above but Front Legs

All as per Srl item No 27 above but Side Rails

All as per Srl item No 27 above but Front/Back Rails

All as per Srl item No 27 above but Back Stiffener

All as per Srl item No 27 above but Bottom Stiffener

All as per Srl item No 27 above but Arms rest

M&L for polishing of chair easy with high class French polish to all exposed surfaces except in side of seat frame(04 sides) incl matching with new components with old one after preparation complete all as specified and directed.

PEG TABLE FD-236/266 /277/384 :- S&F in repair of the following parts of Table Peg with Ist class hard wood (teak) as per existing shape and size duly planned as shown on drawing complete all as specified and directed :- Legs

All as per Srl item No 35 above but Long rail

All as per Srl item No 35 above but Short rail

All as per Srl item No 35 above but Side stiffener

M&L for Taking out old u/s top and S&F new top of made of 18/19mm thick prelaminated particle board one side teak face and other side white balancing exterior grade with incl 6mm thick Ist class hard wood (teak) beading all round the top complete all as specified and directed

M&L for polishing of table Peg with high class French polish on all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed.

TABLE DINING 06/08 PERSON FD-239/269 /273 :- S&F in repair of following parts of table dining 06/08 pers with 1st class hard wood (teak) as per existing shape and size duly plannned as shown on drg complete all as specified and directed :- Taking down old U/S top of table dining 06/08 pers and S&F new top of 18 mm thick pre-laminated patrticle board one side teak face and other side white balancing exterior grade with incl 6 mm thick teak wood beading all round the top duly high class french polish complete all as specified and directed.

All as per Srl item No 41 above but Legs

All as per Srl item No 41 above but Long rail

All as per Srl item No 41 above but Short rail

All as per Srl item No 41 above but Stiffener

M&L for polishing table dining with high class french polish on all exposed surfaces except top & bottom complete all as specified and directed.

TRESTLE STORE ROOM WOODEN FD-141(M):- Repair of following parts of trestle store room wooden as per existing shape and size duly planned and finished as shown on drg complete all as specified and directed :- Taking out u/s legs of trestle store room wooden, supply and fixing of new leg of size 400mm x 100mm x 100mm of first class teak wood, as per drg

Taking out u/s rails of trestle store room wooden, supply and fixing of new rail of size 2440mm x 100mm x 100mm of first class teak wood, as per drg

Taking out u/s centre stiffener of trestle store room wooden, supply and fixing of new centre stiffener of size 1220mm x 65mm x 100mm of first class teak wood, as per drg

Taking out u/s side stiffener of trestle store room wooden, supply and fixing of new side stiffener of size 1980mm x 65mm x 100mm of first class teak wood, as per drg

M&L for polishing of trestle store room wooden with high class French polish on all exposed surfaces except top & Bottom incl matching new components with old one after preparation of surface complete all as specified and directed.

TEAPOY FD-232/ 278/382 : S&F in repair of the following parts of teapoy with Ist class hard wood (teak) as per existing shape and size duly planned shown on drawing complete all as specified and directed:- Legs

All as per Srl item No 52 above but Long rail

All as per Srl item No 52 above but Short rail

All as per Srl item No 52 above but Side stiffener

All as per Srl item No 52 above but Centre stiffener

M&L for Taking out old u/s top and S&F new top of made of 18/19mm thick prelaminated particle board one side teak face and other side white balancing exterior grade with incl 6mm thick wood beading all round the top complete all as specified and directed

M&L for polishing of teapoy with high class French polish on all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed.

TABLE WRITING FD-275 : S&F in repair to the following parts of table writing with Ist class hard wood(teak) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed. :- Legs

All as per Srl item No 59 above but Long rail of table frame

All as per Srl item No 59 above but Short rail of table frame

All as per Srl item No 59 above but Drawer including chromium plated knob of 40mm Dia

All as per Srl item No 59 above but Bottom centre stiffener

All as per Srl item No 59 above but Bottom side stiffener.

M&L for Taking out old U/S top and S&F new top of pre-laminated particle board one side teak wood face incl 6mm thick teak wood beadging all round top duly high class French polished complete all as shown in drg and directed.

M&L for polishing of table writing with high class French polish on all exposed surfaces except top & bottom incl matching new components with old one after preparation of surfaces complete all as specified and directed.

TABLE 900mm x 600mm WITH OUT DRAWER FD-231/284:- S&F in repair of the following parts of table 900mm x 600mm W/O drawer with Ist class hard wood (teak) as per existing shape & size duly planned as shown on drg complete all as spcd and directed :- Legs

All as per Srl item No 67 above but Long Rail

All as per Srl item No 67 above but Short Rail

All as per Srl item No 67 above but Bottom Side stiffener

All as per Srl item No 67 above but Bottom Centre stiffener

M&L for Taking out old U/S top S&F new top of pre-laminated particle board one side teak wood face 18/19mm thick incl 6mm thick teak wood beading all ound complete all as shown in drg and directed

M&L for polishing of table900x600mm w/o drawer with high class French polish on all exposed surface except top& Bottom incl matching new components with old after preparation of surface complete all as specified & directed

TABLE 900mm x 600mm WITH DRAWER FD-283:- S&F in repair of the following parts of table 900mm x 600mm with drawer with Ist class hard wood (teak) as per existing shape & size duly planned as shown on drg complete all as spcd and directed :-Legs

All as per Srl item No 74 above but Long Rail

All as per Srl item No 74 above but Short Rail

All as per Srl item No 74 above but Bottom Side stiffener

All as per Srl item No 74 above but Bottom Centre stiffener

All as per Srl item No 74 above but Drawer

M&L for Taking out old U/S top S&F new top of pre-laminated particle board one side teak wood face 18/19mm thick incl 6mm thick teak wood beading all ound complete all as shown in drg and directed

M&L for polishing of table900x600mm w/o drawer with high class French polish on all exposed surface except top& Bottom incl matching new components with old after preparation of surface complete all as specified & directed

TABLE DRESSING LADIES FD-32 (M)/ 251:- Repair of following parts of table dressing ladies as per existing shape and size duly planned and finished as shown on drg complete all as specified and directed :-Removal old U/S looking Glass and fixing new glass of 5mm thick as per existing shape and size.

M&L for Removal old U/S back ply of class and fixing 6mm thick Commercial plywood of existing shape & size

M&L for Removal of old U/S sliding glass and fixing new glass of 3mm thick as per existing.

M&L for Removal of old U/S Pre-laminated particle board top of table and fixing new 18mm th pre-laminated particle board as per existing shape & size.

M&L for Removal of old U/S leg of table and fixing new legs of ist class hard wood (teak)

M&L for Removal of old U/S Drawer and fixing new Drawer of 6 mm thick ply wood commercial with front 18mm pre-laminated particle board as per existing shape and size

SIDE BOARD FD-241 : S&F in repair to the following parts of side board as per existing shape and size duly planned complete all as specified and directed :-Top

All as per Srl item No 88 above but Bottom

All as per Srl item No 88 above but Side

All as per Srl item No 88 above but Shelves

All as per Srl item No 88 above but Drawer shall be made of 6mm thick commercial plywood with 18mm thick pre-laminated particle board front

All as per Srl item No 88 above but Shutter with 40mm size knob

All as per Srl item No 88 above but Back shall be made of 6mm thick commercial plywood.

All as per Srl item No 88 above but Bottom frame with 4 Nos of legs shall be made of Ist class hard wood (teak)

M&L for polishing of side board with high class French polish on all exposed surfaces except topand bottom incl after preparation of surfaces complete all as specified and directed

TABLE BED SIDE FD-248 /276: S&F in repair of the following parts of Table Bed Side with 18mm th pre-laminated particle board as per existing shape and size duly planned and wrought finished as shown on drawing complete all as specified and directed:-Top

All as per Srl item No 97 above but Side

All as per Srl item No 97 above but Shelf

All as per Srl item No 97 above but Bottom

All as per Srl item No 97 above but Back shall be made of 6mm thick ply wood commercial as per existing shape and size and shown in drgs and directed

All as per Srl item No 97 above but Ist class hard wood (teak) 6mm thick beading at front on 18 th pre-laminated particle exposed portion of table bed side

All as per Srl item No 97 above but Ist class hard wood (teak) frame with 4 nos of legs duly french polish.

TABLE CENTRE FD-235/274:-S&F in repair of the following parts of table centre with Ist class wood (teak)As per existing shape and size duly planned as shown on drawing completed all as specified and directed:-Legs

All as per Srl item No 104 above but Long rail

All as per Srl item No 104 above but Short rail

All as per Srl item No 104 above but Side stiffener

M&L for Taking out old u/s top and S&F new top of made of 18/19mm thick prelaminated particle board one side teak face and other side white balancing exterior grade with incl 4mm thick wood beading all round the top complete all as specified and directed

M&L for polishing of Table Centre with high class French polish on all exposed surface except top &bottom incl after preparation of surface complete all as specified and directed.

TABLE 900mm x 900mm FD-88(M)/ 291:- S&F in repair following parts of the table 900x900mm with Ist class hard wood (teak) as per existing shape and size duly Planned as shown on drawing complete all as specified and directed :-Legs

All as per Srl item No 110 above but Long rail

All as per Srl item No 110 above but Short rail

All as per Srl item No 110 above but Table top of 18/19MM thick pre-laminated particle board one side teak wood face and other side white balancing incl 6mm thick teak wood edging all round complete as shown in drg and directed.

M&L for polishing of table 900x900mm with high class French polish on all exposed surfaces except top & Bottom incl matching new components with old one after preparation of surface complete all as specified and directed.

TABLE DRESSING GENTS FD-31 (M)/230:- Repair of following parts of table dressing ladies as per existing shape and size duly planned and finished as shown on drg complete all as specified and directed :- Removal old U/S looking Glass and fixing new glass of 5mm thick as per existing shape and size.

M&L for Removal old U/S back ply of class and fixing 6mm thick Commercial plywood of existing shape & size

M&L for Removal of old U/S Pre-laminated particle board top of table and fixing new 18mm th pre-laminated particle board as per existing shape & size.

M&L for Removal of old U/S Drawer and fixing new Drawer of 6 mm thick ply wood commercial with front 18mm pre-laminated particle board as per existing shape and size

CHAIR EASY WITH CUSHION FD-358:- S&F in repairs following parts of the chair easy with cushion with 1st class hard wood (Shisham) as per existing shape and size duly planned and finished as shown on drawing complete all as specified and directed :- Rear Legs

All as per Srl item No 119 above but Front Legs

All as per Srl item No 119 above but Side Rails

All as per Srl item No 119 above but Front/Back Rails

All as per Srl item No 119 above but Back Stiffener

All as per Srl item No 119 above but Bottom Stiffener

All as per Srl item No 119 above but Arms rest

S&F of cushion foam for chair easy 28 density 75mm thick (Make-Sleepwell) duly covered with best quality tapestry cloth complete all as directed and specified Note:- Rate of tapestry cloth shall not be less than Rs 300/- per RM

M&L for polishing of chair easy with cushion with high class French polish to all exposed surfaces except in side of seat frame(04 sides) incl matching with new components with old one after preparation complete all as specified and directed.

RE-CANNING OF CHAIRS FD-228,229, 279,280,252,244 :- Taking out old u/s cane from chairs etc and re-canning of wooden chairs, dressing stool,Bin solied linen etc with new 2 mm wide half round Godrej pattern white plastic cane and border shall be woven with new 4 mm half round plastic cane of superior quality. complete all as specified and directed.

PRAFUL ENTERPRISES

SK INDUSTRIES