Himachal

Active

Works

Civil Works

A/R and M/O at Old Rest House Building at Fagu Shimla

Public Works Department

mashobra | Shimla, Himachal Pradesh

Amount: Refer DocsCloses: 21 Oct 20263d left

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published12 Oct 2026
Closes21 Oct 2026
Bid Opening21 Oct 2026

Tender Value

Refer Docs

EMD Value

₹8,800

Closing Date

21 Oct 2026, 10:00 am3d left

Tender Inviting Organisation

Name

Executive Engineer kasumpti Division HPPWD Shimla3

Address

Executive Engineer kasumpti Division HPPWD Shimla3

Work Description

Various Repair work at Rest house. ) (Excluding GST)

Tender Information

Tender ID

2026_PWD_145524_1

Reference Number

SD-I-CTR-Tender-2026- 19622 dt 09-10-2026

Tender Type

Open Tender

Product Category

Civil Works

Form of Contract

Percentage

Period of Work

30 days

Location

mashobra

Source Website

Subscribe to view

Eligibility / Pre-Qualification

AS per SBD

Documents Required

12 documents required · 12 mandatory

Fee/PreQual/Technical

RequiredCost of Tender Form On line (.pdf)

RequiredEarnest Money Deposit on line (.pdf)

RequiredGST registration and PAN No (.pdf)

RequiredContractor registration (Refer General rule No.23 and as per invitation of bid (.pdf)

RequiredWork in hand certificate (As per Performa given in General rule No.16 (.pdf)

RequiredMachinery tools and plants (As per schedule F with reference to clause 18 (.pdf)

RequiredForm No. 7/8 duly signed with full address and mobile No (.pdf)

RequiredThe Contractor Shall give affidavit regarding List of both gazette and non gazette HPPWD Employees (.pdf)

RequiredProof of registration under Employee Provident Funds and Miscellaneous provision Act. 1952 (.pdf)

RequiredAffidavit that information furnished with the bid is correct in all respect (.pdf)

Requiredemail Mobile No , and Full Address (.pdf)

Finance

RequiredBill of quantities (.xls)

Fee & Financial Details

Tender Fee Amount

₹350

EMD Fee Amount

₹8,800

Important Dates

Last Activity

12 Oct 2026

Published

12 Oct 2026

Bid Opening

21 Oct 2026

Download Starts

12 Oct 2026

Download Ends

21 Oct 2026

Submission Starts

12 Oct 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (31 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Providing and fixing glazed wall tiles d size mapleor conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST)	22	Per Square meter	974.58	₹21,440.68
2	Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing thetrap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to bemeasured and paid for separately) including carriage of materials in all leads as per directions of the Engineer-in-Charge (i) One piece EWC (Excluding GST)	2	Each	15,677.97	₹31,355.94
3	Providing and fixing C.P. brass angle cock without nuts and pipe including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 15mm(fifteen milimetre) dia (Excluding GST)	10	Each	720.34	₹7,203.4
4	Providing and fixing steel greeting in wash room and kitchen of size 100 x 100 mm, including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 15mm(fifteen milimetre) dia (Excluding GST)	2	Each	110.17	₹220.34
5	Providing and fixing 15 mm CP brass telephone mixer quality & including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. 15 mm nominal bore with top /bottom swinging spout (Excluding GST)	2	Each	4,661.02	₹9,322.04
6	Providing and fixing vitreous China Hind ware IS marked IS No.2556 or euivalent wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings with pedistal complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) Flat back (i)550 x400mm. (Excluding GST)	2	Each	2,203.39	₹4,406.78
7	Providing and fixing S.S. soap dish including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST)	4	Each	296.61	₹1,186.44
8	Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. (Excluding GST)	2	Each	720.34	₹1,440.68
9	Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST)	2	Each	889.83	₹1,779.66
10	Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.(i) 610x510mm with bowl depth 200mm. (Excluding GST)	1	Each	2,966.1	₹2,966.1

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.91 MB

Work Item Documents

SBD437738.pdf

Tender Documents • 7.09 MB

BOQ_216768.xls

BOQ • 0.33 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Providing and fixing glazed wall tiles d size mapleor conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST)

Per Square meter

974.58

₹21,440.68

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing thetrap with soil pipe in cement mortar 1:1(1 cement : 1 sand) (Seat and over to bemeasured and paid for separately) including carriage of materials in all leads as per directions of the Engineer-in-Charge (i) One piece EWC (Excluding GST)

Each

15,677.97

₹31,355.94

Providing and fixing C.P. brass angle cock without nuts and pipe including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 15mm(fifteen milimetre) dia (Excluding GST)

Each

720.34

₹7,203.4

Providing and fixing steel greeting in wash room and kitchen of size 100 x 100 mm, including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 15mm(fifteen milimetre) dia (Excluding GST)

Each

110.17

₹220.34

Providing and fixing 15 mm CP brass telephone mixer quality & including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. 15 mm nominal bore with top /bottom swinging spout (Excluding GST)

Each

4,661.02

₹9,322.04

Providing and fixing vitreous China Hind ware IS marked IS No.2556 or euivalent wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings with pedistal complete including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (a) Flat back (i)550 x400mm. (Excluding GST)

Each

2,203.39

₹4,406.78

Providing and fixing S.S. soap dish including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST)

Each

296.61

₹1,186.44

Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (i) 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. (Excluding GST)

Each

720.34

₹1,440.68

Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge. (Excluding GST)

Each

889.83

₹1,779.66

Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting including carriage of materials in all leads and lifts as per directions of the Engineer-in-Charge.(i) 610x510mm with bowl depth 200mm. (Excluding GST)

Each

2,966.1

₹2,966.1