Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.0 LAccepted-AOC PO LEKHAPANI DIST TINSUKIA PIN 786 180 ASSAM | 786180 | L1 | Accepted-AOC DUE TO L1 RATE | |
| 2 | L2₹29.7 L+₹24,465.50 (0.83%)Rejected-Finance | L2 | Rejected-Finance DUE TO HIGHER RATE | |
| 3 | L3₹34.7 L+₹5.3 L (17.9%)Rejected-Finance AT ROAD NEAR RENUKA CINEMA P O DIST TINSUKIA ASSAM PIN 786125 | TINSUKIA | TINSUKIA | ASSAM | 786125 | L3 | Rejected-Finance DUE TO HIGHER RATE | |
| 4 | L4₹35.7 L+₹6.3 L (21.3%)Rejected-Finance GANDHI PARK ROAD TINSUKIA ASSAM PIN 786125 | TINSUKIA | ASSAM | 786125 | L4 | Rejected-Finance DUE TO HIGHER RATE |
Tender Value
₹29 L
EMD Value
₹58,000
Closing Date
13 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE LEKHAPANI
TINSUKIA, ASSAM
SPECIAL REPAIR OF BLDG NO T-18 AND PROVN OF VEH PARKING SHED NEAR OFFICE COMPLEX OF 1881 LT REGT AT LEKHAPANI MIL STN
2022_MES_537919_2
8669/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE LEKHAPANI
Class E and category a (i)
4 documents required · 4 mandatory
₹500
Yes
GE LEKHAPANI
₹58,000
Yes
12 Oct 2022
23 Aug 2022
20 Sept 2022
23 Aug 2022
13 Sept 2022
30 Aug 2022
Amount
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep getting out in soft/loose soil complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth for foundation for laying of cable, pipes etc and getting out in soft/loose soil all as specified and directed.
Retruning, filling, including spreading, levelling, watering and well ramming in layers not exc 25cms of soil complete all as specified and directed.
Removing the surplus excavated materisl/soil to a distance not exc 50 Mtrs and depositing, where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
M&L PCC (1:4:8), type D-2, (using 40mm graded stone aggregates) as in foundations, filling, mass concrete etc complete all as specified and directed.
M&L Providing RCC (1:1.5:3), type A-1, (using 20mm graded stone aggregate) as in foundations, raft footings, stub columns etc and similar articles complete all as specified and directed.
M&L Providing RCC (1:1.5:3), type A-1, (using 20mm graded stone aggregate) as in beams, cantilevers, bressumers, lintels bands and similar bands etc.complete including necessary form work complete all as specified and directed.
M & L Providing RCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, landings and similar work not exc 200mm thick (Horixontal or sloping) for rough finished flat surfaces of concrete complete all as specified and as directed.
Formwork to sides of concrete foundation, footings, base of coloumns, raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc. but excluding ashlar facings, dressed stone work & precast concrete articles complete all as specified and directed.
M&L Brick work with sub class old size 'B' bricks, straight or curved on plan to any radius, built in CM (1:4 ) as in half brick thick walls complete as specified and directed.
M & L Brick work with subclass “B” Old size bricks, straight or curved on plan,exceeding 6 m mean radius, built in CM (1:6) complete all as specified and directed.
Taking down chowkat or frame with shutters (without taking off shutters from the frame) not exceeding 1.5sqm each and making good to disturbed surfaces and removing from site of work complete all as specified and as directed by the Engineer-in-Charge.
Taking down chowkat or frame with shutters (without taking off shutters from the frame) exceeding 1.5sqm but not exceeding 4.0sqm each and making good to disturbed surfaces and removing unserviceable materials from site of work complete all as specified and directed by the Engineer-in-Charge.
S&F Pressed steel frames 1.2mm thick of size 105mm X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate with and including one shop coat of primer to outer face and coat of primer and rubber paint on back side of chowkat., complete all as specified & as directed
M&L PCC(1:3:6), type C-1, (using 20mm graded crushed stone aggregates) as in bed block, blocks for holdfasts, filling in pressed steel door frames , benching slightly rounded or chamfered angles & throating etc including necessary use and waste of form work complete all as specified and directed.
S&F for aluminium powder coated (of required colour) two track sliding windows frame top & sides of size 50.3 x 26.00 x 1.00mm (section No 20670) bottom of size 50.3 x 26.00 x 1.20mm (section No 20669) and shutter top and bottom of size 37.5 x 15.00 x 1.30mm (section No 20690) and lock side shutter frame of size 37.5 x 23.00 x 1.30mm (section No 20689) with rubber gasket, beading and locking arrangement including making good to disturbed portion complete including with stainless steel wire staples and fixing 4mm thick glass with necessary rubber beading gasket etc complete all as directed by Eng-in-charge.
S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as directed by Eng-in-charge.
S&F Aluminium powder coated door shutter single / double leaf, side hung type on floor door spring (to be paid sepratly) 44.45mm wide (two panels) fabricated having hanging and meeting style 58.00 mm X 44.45 mm X 1.8mm thick, top rail 83.50 mm X44.45 x 1.62 mm thick, middle rail 83mmx44.45mmx1.70mm thick and bottom rail 95.25 mm X 44.45mm X 1.70 mm thick and including jointing cleats, aluminium anodised snap beading, screws, aluminium anodised fitting such as pair of 'D' type handle 250mm long (decorative type), tower bolts 150 mm long 1 Nos for each leaf, aluminium beading, PVC packing,5mm thick sheet glass, locking arrangement with mort ice lock 6 lever, 1Nos floor door stopper and necessary fitting & fixtures complete all as specified and directed by Engr - In - Charge.
S&F 30 mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides & fixed to chowkats complete all as specified and directed.
S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete fixed to frames all as specified and as directed.
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, complete all as specified and as directed.
S&F Steel ventilators with side hung shutters including projected type hinges with steel handle and steel peg stay MS tower bolt 150mm long complete with glazing bars dovtailed or welded complete as specified and directed.
S&F 3mm thick Figured glass, pin head type and glazing with oil putty in squares nexc 0.5 sq. m in each pane complete as specified and directed.
S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed,complete as specified and directed.
S&F 150 mm size, aluminium anodised , barrel tower bolts of extruded section and fixed complete all as specified and as directed.
S&F 250mm length of bolt, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete as specified and directed.
S&F 150mm size aluminium handles, cast type, anodized and fixed complete all as specified and directed.
S&F Floor door stopper doubled leged of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete as specified and directed.
S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F Galvanised steel wire netting 0.91 mm dia and 12 mm size of mesh for lathing , fixed with tinned tacks of wire staples to wooden frame in wall including all laps, cutting and waste complete all as specified and directed.
Dismantling timber scantlings 40 sq. cm and over in section, in any position complete as specified and directed.
M&L for second class hardwood, scantlings, clean sawn, timber fixed in unframed work etc. complete as specified and directed.
Demolition of wall and ceiling boards (fiber, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.
S&F Providing and fixing inter locking metal grid (snap grid for false ceiling) of size 605mm x 605mm in true horizonatal level, hot dipped galvanised steel sections consisting of main “T” runner with suitably spaced joints to get required length and size 24mm x 38mm made from 0.30mm thick (Min) sheet spaced at 1200mm centre to centre and cross “T” of size 24mm x 28mm made of 0.30mm thick (Min) sheet, 1200mm long spaced between main “T” at 600mm centre to centre to form a grid of 1200mm x 600mm and secondary cross “T” of length 600mm and size 24mm x 28mm made of 0.30mm thick (Min) sheet to be interlocked at middle of the 1200mm x 600mm panel to form grids of 600mm x 600mm and wall angle of size 24mm x 24mm x 0.4mm. Main “T” runner to be suspended from ceiling /truss/purlis using 2 to 3mm GI wire, 1200mm x 600mm centre to centre all complete for all heights as per specifications and as directed by Engineer – in - Charge.
S&F 4mm thick high pressure, oceanic pre-primed, self embossed, non asbestos fibre cement decorative board, water, termite and fire resistant for insulation and acoustic purpose to be placed in the grid system , with provision of light fixtures, air conditioning, diffuser and ducts, sprinkler, smoke detector etc. complete all as per manufacturer instructions,and as directed by Engineer – in - charge.
S&F in repairs curtain rod 25 mm dia Chromium plated or PVC sheathed , with and including PVC decorative round finials on either end provide a visually balanced appearance including MS powder coated brackets fixed to wall with 30 mm screws and PVC rawl plug, anchors, complete all as directed by Eng-in-charge.
M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.
All as per Item No.39 above but 6 to 8 mm dia complete all as specified and directed.
All as per Item No.39 above but 6 to 10 mm dia as in stirrups,spacers and binders,etc complete all as specified and directed.
Dismantling structural steel work of any description including stacking for refixing complete all as directed by Eng-in-charge.
S&F Rolled mild steel Plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, with out any attachment conforming to Fe:410-W(Gde-E-250) quality-A complete all as specified and directed.
S & F Steel work of in hollow rectangular or square tubular trusses incl special shaped washer etc complete using ERW or HRW welded conforming to IS - 4923 (Yst-310) complete all as seified and directed
Fixing only roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as directed by Eng-in-charge.
S&F Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1979 (Yst.-310) complete all as specified and directed.
S&F Mild steel screw bolts (Machine made) with hexagonal or square head at one ends and screwed the other or screwed both ends each screwed end to be fitted with washers complete all as specified and directed.
S&F Framed work such as griils, grating, angle iron door frames etc., with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, laders, framed balusters, walk ways, railings frame work of water tanks and similar work conforming to Fe-290. Gde E-165 complete all as specified & as directed.
Dismantling of plain or corrugated steel sheeting any guage, thickness including Nanital or similar pattern roof coverings complete all as specified and as directed.
M&L for pre-painted hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified includnig necessary scaffolding and safety measures at any floor complete all as specified and as directed.
All as per item No.50 above but except sheeting complete all as directed by Eng-in-charge.
M&L for hot dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in ridge/valley/gutter/eaves boarding fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.
M&L for provisioning and laying of waterproofing treatment with polymeric APP membrane of 3mm thick, consisting centre core of 160 gms/sqm polyester Non Woven Fabric over and including 15 mm thick rendering in CM (1:4) with water proofing compound (URP -301 of Piditilite). The laying consist the following complete all as specified and directed by Eng-in-charge. (a) Firstly : Cleaning the entire prepared roof surfaces shall be applied one coat of cold bituminous primer @ 250 grams/sqm, Conforming to IS 3384-1986. (b) Secondly : Provide/laying of 3mm thick polyester APP membranes over the cold bituminous primer. Application of APP membranes shall be by torch application. The overlaps shall be minimum 100mm and thermo fused. (c) Finally : Blown bitumen surfaces shall be coated with aluminium primer @ 110 grams/sqm complete all as specified and directed.
Demolition of reed, lathing, single or double, including battens and plaster or chicken wire lathing complete as specified and directed.
Demolition of unreinforced cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M&L PCC ( 1:3:6 ), type D-2 (using 40 mm graded stone aggregate), as in sub base of floor complete all as specified and as directed.
M&L Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete as specified and directed.
M&L Sand filling under floors or in foundations including watering and consolidation complete as specified and directed.
M&L Factory made chamfered edge cement concrete paver block with grey cement and no pigments any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade.manufactured with table vibratoy method using PU mould laid in required coloured and pattern laid over sand bed complete all as specified and directed by Engr-in-charge. Note:-Sand bed shall be measured and paid separately.
M&L Factory made chamfered edge cement concrete coloured paver block with grey cement and pigments any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade.manufactured with table vibratoy method using PU mould laid in required coloured and pattern laid over sand bed complete all as specified and directed by Engr-in-charge. Note:-Sand bed shall be measured and paid separately.
M&L 50 mm thick PCC (1:3:6) type C-1, (using 20 mm graded stone aggregates) as in plinth protection etc, finishing cement concrete surface even and smooth with out using extra cement including making joints with hot bitumastic mix in proportion of bitumen and sand 1:2 complete as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all complete as specified and directed.
M&LGlazed coloured ceramic tiles in vertical surface 300x450x6 to 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles laid over & including 10 mm thick rendering as in backing wall plaster in cement mortar (1:4) complete as specified and directed.
M&L Coloured non skid joint free ceramic tiles of 7mm to 8mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete as specified and directed.
M&L for Coloured ceramic tiles 8 to 9mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete as specified and directed.
M&L for Coloured ceramic tiles 8 to 9 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 sqm invertical surfaces such as skirting, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete as specified and directed.
M & L for Granite (of any type) tiles 15 to 17mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigent to match the shade of granite stone including grinding and polishing complete over 20mm screed bed of CM (1:4)complete all as specified and directed.
M&L Rendering 10.mm thick plaster in CM (1:6) on fair faces of brick work or concrete surfaces including finishing top even and smooth without using extra cement complete all as specified and directed.
M&L Rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfacesand finished fair and even complete all as specified and directed.
M&L Rendering 20 mm thick (in two layers) in CM (1:6) on fair faces of lathing complete finished fair and even complete all as specified and directed.
M&L Preparation of old painted or plastered surfaces of walls etc by washing, rubbing down and applying two coat of cement bases paint including 1 to 2 mm thick exterior wall care putty complete all as specified & directed.
M&L Prepration of newly plastered surface of wall and applying two coats of cement based paint including 1 to 2 mm thick exterior wall care putty over a coat of primer complete.
M & L Preparation of new plastered surfaces of wall and applying two coats of distemper oil emulsion over a coat of primer including 1 to 2 mm thick wall care putty complete all as specified & directed.
M&L Preparation of old plastered surfaces of walls,by washing,rubbing down and stopping of distempered and painted surfaces etc.and applying two coats of distemper oil emulsion over a coat of primer and including 1 to 2 mm thick wall care putty complete all as specified and directed.
M&L Preparation of newly plastered surfaces on walls and applying three coats of white wash complete all as specified and as directed.
M&L for preparation of old plastered surfaces of wall and applying two coat of white wash complete all as specified & directed.
M&L Preparing new wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L Preparing old wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L Preparation of new or previously untreated steel and Iron surfaces of any description, over 10 cm width or girth, not otherwise described and evenly applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M&L Preparation of old steel surfaces of any description, over 10 cm width or girth, not otherwise described and evenly applying two coats of synthetic enamel paint complete all as specified and directed.
S&F PVC (SWR) pipes 110 mm dia single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.
S&F PVC (SWR) pipes 75 mm dia single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.
S&F PVC (SWR) bends 110 mm dia any radius complete all as specified and directed.
S&F PVC (SWR) bends 75 mm dia any radius complete all as specified and directed.
Taking up or down steel water tubing and connections, including cleaning for refixing or removal from site, for bore of pipes 15mm dia complete all as specified and directed.
S&F 15mm dia bore of pipes, medium grade, galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
Taking up or down steel water tubing and connections, including cleaning for re-fixing or removal from site, for bore of pipes 20mm dia complete all as specified and directed.
S&F 20mm dia bore of pipes, medium grade, galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
S&F in repair, Wash basins white, vitreous China, flat back, size 580x450mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets fixed to wall complete all as specified and directed.
S&F in repair PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and directed.
S&F in repairs 15mm bore dia stop valves / angle valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repairs 20mm bore dia stop valves / angle valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F in repair Single piece vitreous China suite european water closet and cistern, white colour, with UF seat cover with fittings complete all as specified and directed. Make :Cat Part No C8906 (S-300) of Parryware or equivalent model in Cera/Hindustan as approved.
S&F in repair vitreous China Urinal Magnum series, white,(380x405x590mm) with and including urinal spreader complete all as specified and directed. Make: Cat Part No C0583 of Parryware or equivalent model in Cera/Hindustan as approved.
S&F in repair 32mm waste coupling of PTMT (half or full threaded) (minimum weight 40mm-60 gms) fixed complete all as specified and as directed.
Dismantling water tanks exc 500 Ltrs but not exceeding 1000 Ltrs capacity complete all as specified and as directed.
S&F Rotational moulded polyethylene water storage tanks of 1000 Ltrs capacity,(cylindrical vertical with closed top) double layered hoisted and fixed in position all as specified in SSR part-I complete all as specified and directed.
S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long fixed in repair complete all as specified and directed.
S&F Soap dish of stainless steel fixed to wall with chromium plated brass screws fixed in repair complete all as specified & as directed
S&F Stainless steel tubular towel rail 600mm long with brackets 20mm dia fixed to wall with chromium plated brass screws fixed in repair complete all as specified & as directed .
M&L 75mm dia PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed.
S&F in repairs, fancy type15mm dia pillar taps, swan neck type cast copper alloy with capstan heads, chromium plated , screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repairs bib taps long body suitable for 15mm bore of pipe, fancy type, chromium plated, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
Supply and fix white vitreous China, under counter wash hand basin, oval shape, of size 190 x 550 x 425 mm fixed in granite counter by making suitable size hole, supply & fix new brackets, 32 mm size brass chromium plated waste coupling, 750 mm long PVC waste pipe, complete, all as specified and directed. Note:- Granite counter will be measured & paid separately.
Taking down copper/aluminium point wiring, (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.complete all as directed by Eng-in-charge.
M & L for surface point wiring complete with 2x1.5 sq mm FRLSH, PVC insulated multi standard copper conductor single core cable 1100 volts grade (Red/Yellow/Blue colour), drawn into and including non metalic PVC Casing/caping medium grade of suitable size and fixing accessories, fixed on wall/ roof etc, and including provn of PVC insulated 1.5 sq mm FRLSH (Green colour) copper conductor for each continuity and connected to common earth dolly,etc for one light point controled by one one way 5 Amp switch complete, all as specified and directed by Engineer-in-Charge. Note :- Cost of PVC casing/caping, making good disturbed wall surfaces, matching with existing shade/pink of the painted surface are deemed to be included in the quoted rate.
All as per Item No.107 above but one fan point controlled by one , one way 5 Amp switch
All as per Item No.107 above but one 5 pin socket outlet 05 Amp on independent board .
All as per Item No.107 above but one 5 pin socket outlet 05 Amp on same board with other switches
All as per Item No.107 above but for one 15 Amps socket outlet but using copper conductor with 2.5 sq mm, PVC insulated single core cable complete all as specified and directed.
S&F Modular switch one way 6 Amps 1 module including Modular PVC cover plate with frame & metal flush box of suitable size all as specified and directed.
S&F Modular switch one way 16 Amps 1 module including Modular PVC cover plate with frame & metal flush box of suitable size all as specified and directed.
S&F Modular switch socket outlet, 5 pin 6 Amps flush type 2 module including Modular PVC cover plate with frame & metal flush box of suitable size all as specified and directed.
S&F Modular socket outlet,5 pin 6/16 Amps flush type 2 module including Modular PVC cover plate with frame & metal flush box of suitable size all as specified and directed.
S&F Modular ceiling fan regulator,electronic type,step type 5 speed A/C, 230 volts all as directed by Engineer-in-Charge including Modular PVC cover plate with frame & metal flush box of suitable size all as specified and directed.
S&F Ceiling rose, 3 terminals, surface bakelite, PVC/Polycarbonate all as specifed and directed.
S&F LED tube light fitting 4 ft. 1 x 18 watt with 230 volts, with bipin holder connector block, LED retrofit tube rod etc complete with all accessories internally pre-wired and fixed to walls/ceiling with screw on round PVC blocks including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
S&F Lamp Holder insulated body with back plate angle/straight type suitable for batten complete all as specified and directed.
S&F LED Blub 10 watt Self Ballasted Retrofit type lamp with PBT body shell and DC Diffuser CCT 6500 K with fitting complete all as specified and directed.
S&F Round shape 12 watt 220 volts AC, recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders LED lamp suitable for roof ceiling including connecting up with three core flexible copperconductor cable of suitable size complete all as specified and directed.
S & F Fan hooks made of MS clamp deformed to proper shape including nut & bolts and drilling/cutting roof as required at site and fixing fan hook with existing steel reinforcement all as directed by engr-in-charge.
S&F LED bldg security light fitting 48W watt with 230 Volts with IP 66, high Impact resistance complete, internally pre-wired and mounted on and including GI pipe bracket of suitable size and length with MS flat 40x3mm clamps made to shape and drilling holes, fixing on wall with suitable size nuts/bolts/washers complete all as specified and directed.
Taking down unserviceable Ceiling Fan, opening of fan motor, removing the burnt winding wire, rewinding with suitable size copper winding wire, painting fan outer body with approved colour, replacement of unserviceable capacitor with new capacitor of capacity 2.5 mfd, provn of flexible twin twisted copper wire 1.0 RM and hanging back in position and connection complete all as specified and directed.
S&F Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed.
M & L Sub main wiring complete with 2 runs of 6 sq mm, FRLSH single core, PVC insulated, unsheathed cable,1100 volts grade,multi standard with copper conductor drawn through and including PVC casing/caping of size not less than 20mm medium grade and fixed on wall / roof etc., with one run of FRLSH PVC insulated 6 sq mm FRLSH multi-stranded copper conductor for earth continuity conductor including taking down old US wiring all as specified and directed. Note :- Three runs of 6 sqmm cable and one run of casing/caping shall be measured as one unit length.
S&F Sheet metal enclousure MCCB DB TPN (without MCCB) double door type AC 415 V 4 way with 200 Amps rated bus bar vertical type, having provn for fixing MCCB as incomer, flush to wall including taking down old one complete and making good of distructed surface all as specifed and directed.
S&F MCCB Triple pole & Neutral 100Amps, 35KA breaking capacity with adjustable microprocessor release complete all as specified and directed
S & F MCB SP 6 to 32 Amps 240 volts complete all as specified and directed.
S & F MCB SPN 6 Amps to 32 Amps 240 volts complete all as specified and directed.
S&F Single pole and neutral DB wall mounting type,240 Volts, 8 Way with 200 Amps rated bus bar,double door suitable for fixing MCB's including connecting etc and taking down U/S DB ,main switch all as specifed and directed.
S&F Sheet metal enclosure single pole and neutral enclosure with a two pin and earth plug and socket complete with one SP MCB 20 amps 240 volts complete all as specified & directed.
S&F (in replacement) On load change over switch 100 Amps, 415V, AC 50 Hz, front operated handle, totally enclosed in sheet metal enclosure including fixing on wall with suitable accessories and connecting the cable end with suitable size lugs, nuts/bolts/washers etc complete all as specified and directed.
M&L Earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick pre-cast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 8 mm dia TMT bars both ways and testing on completion complete all as specified & directed by Engineer-in-Charge.
S&F 36 Watt LED fitting back lit panel having white polycarbonate body & aluminium plate heat sink, high quality PMMA and HPF driver suitable for armstrong/grid ceiling,fixture size 595x595 mm,powder coated aluminium extruded housing including LED driver and lamp and fixing in recess ceiling with suitable size of aluminium strip as required for fixing of LED fitting with all accessories prewired and connecting up with 3 core twisted flexible copper conductor cable of size 23/0.0076 including taking down old unserviceable fitting complete all as specified and directed.
S&F Ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC).complete all as specified and directed.
Supply and spread river sand for cushioning of cables in trenches all as specified in MES Schedule Part-I and complete all as specified and directed. Note: Punned thickness only will be measured and paid.
Supply and laying old size brick, size 230x115x75mm burnt clay building brick sub class (B) for protecting LT U/G cable complete all as specified and directed.
Supply,laying,testing and commissioning of XLPE Insulated screened PVC bedded galvanized steel strip or wire armored electric power cables(heavy duty) 1100 Volts grade with stranded aluminium conductor of size 3.5 core, 50 sq mm complete all as specified and directed.
Supply and laying 40 mm dia GI tubing (light grade) complete with all fittings (ISI Marked) laid in trenches/fixed on pole/wall complete including taking down old unsv GI pipe all as directed.
M&L Boring of holes under road, pavement, hard standing by trenchless technology technique for 50-100 mm dia pipe all as specified and directed..
Taking down old unserviceable LT UG Cable 50 sqmm 3.5 core complete all as directed by Eng-in-charge.
FEBI CONSTRUCTION
STANDARD ELECTRIC WINDERS
Bimal Trading Company
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .