REPAIR/ REPLACEMENT OF JOINERY, PLASTERING, PERIODICAL SERVICES AND OTHER ALLIED WORKS IN VAYU VIHAR VAT AF STN ADAMPUR

Amount

S&F, Factory made 35 mm thick ,2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);,etc complete all all as specified.

S&F, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, thickness 30 mm,etc complete all all as specified.

S&F, Factory made 2nd class hard wood rail and style, thicknesss of shutters,35 mm, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated,etc complete all all as specified.

S&F, Factory made solid PVC Door frame of size 50mm x 47mm made out of 5mm thick Wood grain colour PVC sheet reinforced with mild steel square tube, suppling & fixing in opening, complete all as specified.

S&F, Factory made Solid wood grain colour PVC moulded door Shutter as in cupboard with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2 mm thick PVC sheet polyurethane painted on the front face and 2 mm prelam PVC sheet on back face complete all as shown on drawing and as specified.

S&F, Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded wood grain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stile and rails with suitable PVC sheet beading and jointed together with solvent cement as specified in SSR Part II, complete all all as specified and directed.

S&F, Aluminium anodised barrel tower bolt of extruded section 150mm long, ISI marked, complete all as specified and directed.

S&F, Aluminium alloy, anodised, ISI marked sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 250 mm long, complete all as specified and directed.

S&F, Stainless steel 100mm long butt hinges galvanised mild steel hinge pin anodised complete all as specified and directed.

S&F, Mild steel helical door spring 200 mm, including roller and roller plate, ISI marked, complete all as specified and directed.

S&F, Extruded aluminium anodised handles fabricated type with plate 125 mm long, ISI marked complete all as specified and directed.

S&F, Double leg aluminium anodised door stopper with rubber foot, 100mm long ISI marked and fixed to bottom rail of doors with steel screws, complete all as specified and directed.

S&F, Aluminium anodised 100mm size hasp and staple, safty type with mild steel hinge pin including bolt to hinge plate and fixed with screw complete all as specified.

M&L for Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks or steel wire staples all as specified and directed.

M&L for Framed mild steel work such as grills, grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290-Gde E-165, complete all as specified and directed.

S&F, Factory made steel windows with side hung shutter with glazng bars each shutter with and including 02 No. box type hinges & two nos. tower bolts of size not less than 150 mm size and peg stays, dovetailed or welded, including one shop coat of zink chromate primer complete all as specified and directed.

S&F, Factory made steel windows with side hung shutter without glazng bars each shutter with and including 02 No. box type hinges & two nos. tower bolts of size not less than 150 mm size and peg stays, dovetailed or welded, including one shop coat of zink chromate primer complete all as specified and directed.

S&F, Steel windows or ventilators, fixed type made of MS sheet 1.25 mm thick box type (primer coated), ERW hollow 'P' section of size 60mm x 25 mm complete all as specified and directed. NOTES APPLICABLE TO SERIAL ITEM NO. 18 TO 20: (a) Profile section used under these items shall be 'P' tube as shown in drawing No. CE/AF/STD-170/07, CE/AF/STD-171/07 and CE/AF/STD-172/07 as applicable.

S&F, Pressed steel frames of size 105 mm x 60 mm made out mild steel sheet 1.25 mm thick, for doors with one or more rebates including necessary fixing lugs, 100 mm size medium grade mild steel hinges, lock strike plates etc including providing PCC (1:3 :6) type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified.

S&F, Pressed steel frames of size 125 mm x 60 mm made out mild sheet 1.25 mm thick, for doors with one or more rebates including necessary fixing lugs, 100 mm size medium grade mild steel hinges, lock strike plates etc including providing PCC (1:3 :6) type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified.

M&L for Rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), including taking down cement plaster complete all as specified.

M&L for Rendering 15 mm thick on of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:6), including taking down cement plaster complete all as specified.

M&L for Rendering 15 mm thick on of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:4), using water proofing compound as per recommended ratio, including taking down cement plaster complete all as specified and directed.

M&L for Repairing of RCC projection chhajjas, roof, facia etc by necessary scraping cutting, chiseling derusting,preparation,and cleaning of rusted reinforcement with anti rust zink nich prime solution and a coat of bonding agent, surfaces of damaged, loose RCC with micro concrete and reinforcement with & including mild steel chicken mesh and finished with cement and sand mortar (1:3) using coarse sand and work in patches area n.exc 5 Sq.m and thickness of RCC member n.exc 70mm at any height or location incl necessary formwork, complete all as specified. NOTE FOR SER ITEM 26 to 28: Supply only WPC will be measured and paid for separately under respective item of BoQ.

Supply only water proofing compound, ISI marked, complete all as specified.

M&L for One coat of white wash on old ceiling surfaces, including preparation of surfaces, complete all as specified.

M&L for Three coats of white wash on new plasterd ceiling surfaces, including preparation of surfaces, complete all as specified.

M&L for One coat of white wash on old wall surfaces, including preparation of surfaces, complete all as specified.

M&L for One coat of interior acrylic distemper on old wall surfaces including preparation of surfaces, complete all as specified.

M&L for Prepration of new plasterd wall surfaces of any description complete all as specified and applying the following: - (a) Applying wall care putty, in two coats & smoothening the surfaces etc. as specified (preparatory to paint as directed). (b) Two coats of interior acrylic distemper over and including a coat of acrylic emulsion primer.

M&L for Complete removal of existing treatment from plastered wall, pillars, cornices surfces and preparation of the surfaces to the entire satisfaction of EIC and applying the following treatment: - (a) Applying wall care putty, in two coats & smoothening the surfaces etc. as specified (preparatory to paint as directed). (b) Two coats of interior acrylic distemper over and including a coat of acrylic emulsion primer.

M&L for Prepration of new plasterd wall surfaces of any description complete all as specified and applying the following: - (a) Applying wall care putty, in two coats & smoothening the surfaces etc. as specified (preparatory to paint as directed). (b) Two coats of exterior acrylic emulsion over a coat of exterior (water based) primer

M&L for Complete removal of existing treatment from plastered wall, pillars, cornices surfces and preparation of the surfaces to the entire satisfaction of EIC and applying the following treatment: - (a) Applying wall care putty, in two coats & smoothening the surfaces as specified. (preparatory to paint as directed). (b) Two coats of exterior acrylic emulson over and including a coat of water based exterior primer.

M&L for Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips complete all as specified and directed.

M&L for Plain sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads in squares n. exc. 0.5 Sq.m in each pane complete all as specified and directed.

M&L for Figured glass 4mm thick ordinary quality and glazing with oil putty in squares n. exc. 0.5 Sq.m in each pane complete all as specified and directed.

M&L for Uprooting tree/plants upto 30 cm girth from wall or any part of building upto double storey buildings completly to the entire satisfaction of Engineer-in-Charge, making good the disturbed portion and filling holes in cement mortar (1:3) or PCC (1:2:4) type B-1 using 20mm graded stone aggregate to match with existing surfaces and removal of rubbish outside MOD land complete all as specified and directed.

M&L for Applying one coat (finishing coat) of synthetic enamel paint, including preparation of old painted wood and wood based surfaces of any description not other wise described over 10cm width or girth and complete all as specified.

M&L for Two coats of synthetic enamel paint over & including a coat of pink primer over new wood and wood based surfaces of any description not other wise described over 10cm width or girth including preparation of surfaces, complete all as specified and directed.

M&L for Applying one coat (finishing coat) of synthetic enamel paint including peparation of old painted steel & iron surfaces of any description not other wise described over 10cm width or girth, complete all as specified and directed.

M&L for Two coats of synthetic enamel paint over & including a coat of red oxide primer over new steel or iron surfaces of any description not other wise described over 10cm width or girth including preparation of surfaces, complete all as specified and directed.

S&F, uPVC pipes,110 mm external dia pipe, type-A, ISI marked (IS:13592) single socketed in any length with or without rubber ring joints, fixed along walls with PVC clamps as RWP, IN REPLACEMENT, complete all as specified and directed.

S&F, uPVC pipes,160 mm external dia pipe, type-A, ISI marked (IS:13592) single socketed in any length with or without rubber ring joints, fixed along walls with PVC clamps as RWP, IN REPLACEMENT, complete all as specified and directed.

S&F, uPVC bend / shoe, 110 mm external dia type-A, ISI marked any radius, IN REPLACEMENT, complete all as specified and directed.

S&F, uPVC bend / shoe, 160 mm external dia type-A, ISI marked any radius, IN REPLACEMENT, complete all as specified and directed and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sq.m each and removing from site all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sq.m but not exceeding 4.00 Sq.m each and removing from site all as specified and directed.

Taking down shutters of any description not exceeding 1.00 sqm each and removing from site all as specified and directed.

Notes: Amount of credit for retrieved materials is mentioned in tender documents in pdf form which will be deducted while acceptance of tender offline.

PRATHAM TRADERS (BID ID -3352433)

A H BUILDERS (BID ID -3352066)

siddharthenterprises (BID ID -3352443)

M/s AKG Engineers & Contractors (BID ID -3352809)

VISHWAMITRA CONSTRUCTIONS (BID ID -3355311)

MALHOTRA AND ASSOCIATES (BID ID -3355369)

DUGGAL CONSTRUCTION CO (BID ID -3354621)

BHARAT ENTERPRISES (BID ID -3354650)