Construction of Compound Wall and Burial Shed at Dugong Creek Little Andaman SW Providing IEI

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required a) Group-C

Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. a) 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

b) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing of surface mounted LED Batten fitting for 20 Watt T-8 Lamp similar to Havells Cat No. LHFYBYPNIA1W022 or its equivalent, etc as required.

Supplying of LED 20 Watt T-8 Tube Lamp similar to Cat NO. C&S Cat No. LT4F20WLEDT8/WD or its equivalent, etc as required.

Supplying and fixing of LED Street Light Fitting 45 Watt similar to Crompton Cat No. LSTS-45-CDL-1 or its equivalent, etc as required.

Manufacturing and supplying of street light pole made out of 65 mm dia "B" class ISI Marked GI pipe with Zinc Coating not less than 360 mgs / sum 6 meters long with earth stud and necessary GI reducer / coupling fixed at the top and 300mm x 300mm x 6 mm thick MS base plate welded to the bottom including painting with one coat of metallic primer and 2 coats of synthetic enamel paint etc., as required

Supplying and fixing of 32 mm dia x 2.00 meters long GI Pip[e (Medium Class) bracket for mounting of fluorescent / HPMV/ HPSV street Light fitting on pole including bending the pipe to the required shape, 2 Nos. 40 mm x 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc., as required.

Erection of metallic street light standard pole of length exceeding 4.5 meters but not exceeding 6.5 metres in cement concrete 1:3:6 (1 Cement: 3 Coarse sand:6 graded stone aggregate 40 mm nominal size) foundation with cement concrete collar of size 0.4 m dia x 0.5 m height to accommodate the looping type cable end box including excavation and refilling etc., as required

Supplying of following size of XLPE insulated Heavy duty armoured Aluminium conductor UG Cable of 1.1 KV grade conforming to IS: 7098 Part-I) and IS No. 1554 (part-I) 1988 as applicable Make CCI/ Gloster/ havells/ Polycab/ Finolex etc., as required. a) 6 Sq.mm x 2 Core

Supplying and laying of one number double walled corrugated high density poly thylene pipe having corrugation on the outer wall and plain surface inner wall conforming to IS: No. 14930 Part I & II complete with necessary HDPE fitting for protection of 1.1 KV grade directly in ground at the depth of 50 cm i/c excavation & refilling the trench etc., as required. a) 50 mm outer dia & 38 mm inner dia

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. a) Upto 35 sq. mm

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) a) 6 way, Double Door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. a) Single pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required a) 40 A

Supplying and fixing Single Pole Blanking Plate in the existing MCB DB complete etc., as required

Providing earthing with safe earthing electrode of galvanization 80 to 100 microns, length 2000mm, outer dia 50 mm, inner dia 25 mm and inner space be filled with crystalline conductive mixture including filling -up with electrolite (Back fill compound) as required for safe earth electrode and providing masonary enclosure with cover plate having locking arrangement etc. as required. (Ashlok)

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required. a) 40 A

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.