Loading
Loading…
Loading…
Tender Value
₹2.6 Cr
EMD Value
₹2.8 L
Closing Date
13 Feb 2026, 2:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
S AND T
14 conditions · 2 needing a document upload
For works amounting Rs.50 lakhs and above: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of 'total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Defination of Similar Work :- Any work of Signal or Telecom involving trenching, laying & testing of Signal or Telecom cables OR Any other miscellaneous outdoor S&T work.
9 conditions · 2 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Demand for the Financial Criteria, Association of Railway Officers, List of Arbitration cases, Court cases and Mandate for NEFT are to be uploaded with a scanned copy duly filled in and signed as per annexure no. IV, V, VI, VII, VIII, IX, XI, VIA, VIB, VI and Annexure-V and Annexure- V(A) of GCC-2022 respectively. These Annexures are available in View Document menu at Home page and is downloadable. The details of the uploaded documents should be produced whenever demanded for verification on written request at any point of time of the tender and contract within 7 days.
1)Intending tenderer must understand the work before quoting. The submission of tender shall be deemed to have been done after careful study and examination of the papers as well as work site and understanding of the implication thereof. 2) Quoted rates shall include all types of taxes (GST etc.), duties, carrying cost of all materials for the work including loading and unloading involved in the concerned work. 3) All supplied materials to be deposited at the office of SSE/Sig./Store/ASN . 4) All materials supply by the Rly. have to be transported from the office of the SSE/Sig./Store/ASN to the site of work by the contractor's own arrangement. 5) Any material, which is required for execution of the work, not mentioned in the schedule as Railway supply, contractor has to arrange for the same as per advice of Rly. Site Engineer. 6) Painting to be done on all items as per provision of Signal Engineering Manual/Rly , as per Rly. site engineer. 7) Items supplied by the contractor will be inspected by authorized representative of Sr.DSTE/ASN except those materials which will be inspected by RDSO / RITES/TPI. If total value of a item is more than 5 lakhs , then inspection of that item to be done by RDSO/RITES/TPI. Inspection cost, if any, shall be applicable as per latest rules and guidelines. 8) Any required drawing may be collected/ consulted from Sr.DSTE/ASN's office.
9) A site supervisor from contractor side shall be present at site during execution of work. Execution work at site will be done as per instruction of Rly. site engineer. 10) Care should be taken to avoid damage to existing gears during the work. Any damages to the Railway property shall be made good by the contractor in his own cost. 11) The Contractor & his supervisors, staff must take proper precaution during working in Railway area to prevent any interference with existing Rly. system, working & passengers. 12) All the tools and other testing equipment for installation, testing and commissioning should be arranged by the contractor at his cost. 13) Contractor have to submit indemnity bond for safe custody and protection of railway materials during transportation ( sample may be collected from office). 14) Latest guideline of Railway Bd.'s vide letter no. 2018/CE-I/CT/9 dated 04.06.2018 regarding "Letter of Credit" as Mode of payment in Works Tenders or Service Tenders is attached in pdf file. 15) Eastern Railway JPO No.94 for protection of cables is attached in Annexure-I. . Accordingly, while working near underground Signalling, Electrical & Telecommunication cable, proper care should be taken to avoid the cable cut/damage, other wise the penalty amount as per Railway Guidelines will be recovered from the contractors. 16. PVC clause shall be applicable only in tender having advertised value above Rs.2 Crore vide Railway Bd,s letter no. 2022/CE-I/CT/GCC- 2022/Policy, dated 14.07.2022.
Asansol Division: S&T work in connection with Track Renewal Works in various section of Asansol Division.
39-SDSTE-ASN-2025-26~ER
39-SDSTE-ASN-2025-26
Open
Works - General
18 Months
Paschim Bardhaman, West Bengal
₹0
₹2.8 L
13 Feb 2026
22 Jan 2026
30 Jan 2026
99 items across 8 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,75,78,444.3 | ||
| — | 100.00 | — | — | ||
| Supply of Point JB made of FRP material ( FRP material specification RDSO/SPN/151/1997 or latest) fitted with 18 nos. 1-way terminal block confirming to IRS-S-75/2006 or latest, DRG. NO. SA-23741A with 3 no. of 40 mm bore G I PIPE 600 mm long and 02 FRP angles of size 40x40x6 mm pultruded with provision for fixing of angles as per DRG. NO. SGW/MGS/ PT4/91 fixed on hylum sheet with U channel (75x40x1500) mm for fixing ARA terminal to be procured from RDSO approved sources. Inspection-RITES. | — | — | — | 8,78,982 | |
| — | 100.00 | — | — | ||
| Supply of GI bend pipe, 'B' class, 50mm dia. for cable entry in point machines, along with required fixing arrangements as per standard practice on Eastern Railway. Inspection: Consignee. | — | — | — | 2,61,300 | |
| Man-Days | 500.00 | — | — | ||
| Supply of labour( helper) for varios S&T works as per site requirement, in joint block/work programme, for infringement clearance etc. as per instruction of Rly. site Engineer , for assistance to Rly. staff/ inspectors/officers during supervision of field work , in taking measurements, by acting as look out men, chowkidars, patrolmen etc and to assist in office work as per instruction of engineer-in-charge or his representative. For safety related works, competency will be ensured by the Rly. site Engineer. The Rly. site Engineer concerned will maintain proper record of supply of labourers by the agency. | — | — | — | 2,55,555 | |
| — | 150.00 | — | — | ||
| Rapid maintenance & repairing of laid cable/existing cables / exposed cables / cut cables during site work as per instruction of Rly. site engineer. The maintenance & repairing gang should have their own maintenance & repairing tools and measuring instruments and they should comprises of (1) one highly skilled staff(ii) one skilled staff & (iii) two un-skilled staff for this purpose of work. All materials for the maintenance & repairing of laid cable/existing cables / exposed cables / cut cables will be supplied by railways. | — | — | — | 4,42,393.5 | |
| — | 360.00 | — | — | ||
| Supply of uncharged Low Maintenance Lead Acid (LMLA) secondary cell OF 200AH / 2V, shelf mounting type conforming to RDSO Specn.No.IRS:S-88/2004 or latest with inter cell connectors, nuts and bolts etc. Inspection: RDSO | — | — | — | 19,60,200 | |
| — | 360.00 | — | — | ||
| Charging of lead acid cell (Secondary cell) of 200AH / 2V as per Manufacturer's/Railway engineer's instruction. Acid and distilled water to be supplied by the contractor. Specific gravity acid should be approved type duly inspected by consignee. This includes installation and commissioning of battery in circuit. | — | — | — | 2,73,960 | |
| — | 20.00 | — | — | ||
| Supply of distilled water plant with stainlesssteel container capable of delivering 3.5 to 4.5ltrs. per hour pure distilled water, including 10ltrs. polythene jar (10 nos ) of good quality tobe inspected by consignee before supply of distilled water plant. note:-this includes installation. inspection: consignee. | — | — | — | 2,90,133.8 | |
| — | 500.00 | — | — | ||
| Supply of Wire Rope Steel Galvanised 19mm (3/4 inch) circumference tensile strength 95-110 Kg./Sq.mm. 7 X 7/22 SWG i.e., consisting of 7 strands of 7 wires each 0.710 mm dia., each coil weighing approximately 46-50 Kg. as per specification No.IRS: S 3-61 Amd.-I (with amdt. upto date if any). Inspection: Consignee | — | — | — | 1,59,300 | |
| — | 2000.00 | — | — | ||
| Supply of steel solid wire galvanised for signalling purpose 8 SWG ( 4 mm) as per Spec. No. IRS:S-13/62 Inspection: Consignee | — | — | — | 3,79,960 | |
| — | 200.00 | — | — | ||
| Supply of insulation for TWS point ground connection (220 mm) stroke point machine with D bracket insulation - 2 nos., (LH+RH). Inspection : Consignee | — | — | — | 1,42,000 | |
| — | 30.00 | — | — | ||
| Supply of Ground Connection [BG] Threaded Type for IRS type Point Machine,Single Slip as per DRG No. S-3153 or Latest and as per CWM/Signal Workshop/Howrah/E. Rly. drawing number, Sl. No., Description of Drawing & CWM/SW/HWH's Drawing No. mentioned below: - 1. Detector Rod (Far End) - BS/29/721 with ALT-1 Detector Rod (Near End)- BS/29/722 with ALT-1. 2. Lock Rod (Far End) - BS/29/723 with ALT-1, Lock Rod (Near End) - BS/29/724 with ALT-1. 3. Switch Extension Bracket - BS/29/725 with ALT-1. 4. Drive Rod - BS/29/726 with ALT-1 Drive Lug- BS/29/726 A with ALT-1. 5. Sleeve- BS/29/726 B with ALT-1. 6. Lug- BS/29/726 C with ALT-1. 7. Pin- BS/29/726 D with ALT-1. 8. Sketch showing the Layout arrangement- BS/29/727 with ALT-1. Amdt. and alt. up to date if any. Inspection: Consignee | — | — | — | 2,54,190 | |
| — | 30.00 | — | — | ||
| Supply of Threaded type complete Ground connection ( BG) of Electrical IRS Point machine for double slip diamond turnout suitable as per Drg. no. S&T/ASN/Misc./04/2018 including supply of all insulating materials, 'D' brackets , links, nuts & bolts and all other accessories. Inspection: Consignee | — | — | — | 4,80,150 | |
| — | 120.00 | — | — | ||
| Installation, wiring and testing of point machine. This includes Drilling of holes in stock/tongue rail, Gauge tie plates, M.S. Plate, installation of point machine on M.S. Plate fixed on sleepers insulating M.S.Plate from GTP and rearranging, refixing of existing electrical point detector if any. This work includes fixing of Point JB, Ground connections complete in all respect including smithy work, welding work. This also includes dismantling of existing point machine with its fittings if any and fixing of new point machine. This includes wiring and termination of cables/wires of point machine & point JB and necessary lettering. This also includes adjustment &testing as per technical specifications. M.S. plates, Nuts & bolts, Washers, spring washers, angle etc. of suitable size required for this purpose are to be supplied by the contractor. The work will be executed as per instruction of Rly. Site engineer. This work also includes dismantling of old point machine with ground connection and re installation of new point machine with ground connection, if required at site. Note: Point machine with ground connection, insulation materials & point JB, cable/wire will be supplied by Rly. | — | — | — | 12,48,840 | |
| — | 120.00 | — | — | ||
| Dismantling of point machine with ground connection including point JB. | — | — | — | 1,40,280 | |
| — | 100.00 | — | — | ||
| Supply of Grease Gun Barrel Lever Type, Capacity 450cc, Piston Size 11/32 having detachable spout with four jaw coupler. Make - Taparia tools ltd. or similar reputed company. Inspection: Consignee | — | — | — | 80,400 | |
| — | 21000.00 | — | — | ||
| Supply of axle oil as per specification IS:1628 ( latest). Container should have mark with the ISI certification mark. Make - Balmerol / MAK/ HPCL. Inspection: RITES | — | — | — | 67,20,000 | |
| — | 15000.00 | — | — | ||
| Supply of Calcium based Graphite Grease Special as per specification IS:508 ( latest). Make- Balmerol/ MAK/SERVO. Technical Specification : Properties - Graphite No. 1 , Colour - Black, Structure -Smooth ,Thickener type- Calcium, Base Oil type - Mineral, Kinematic Viscosity of base oil @ 40°C, ASTM D 445, CST - 68, Worked Penetration 60/60 strokes at 25°C, ASTM D 217 - 310-340., Droping Point °C, min, ASTM D 566. - 95 , Water content, % by wt, IS 1448 : P40, min - 0.4 , Copper strip corrosion @ 100° C, 24 Hrs, ASTM D 4048 - Negative, Graphite content, % by WT, IS 1448 : P58, min.- 6 , Free acidity (as oleic acid), % by mass, ASTM D 128, min. - 0.2 ,Free alkalinity (as Calcium Hydroxide), % by mass, ASTM D 128, min. - 0.05. Inspection: RITES | — | — | — | 36,10,800 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .