REPAIR/ MAINT AND REPLACEMENT OF UNDER GROUNG RISING PIPE LINE WITH CONNECTED ACCESSORIES IN 4 AREA UNDER GE (AF) (TECH AREA), AGRA.

Amount

Taking up/down GI tubing/HDPE/ polyethylene aluminium polyethylene (PE-AL-PE) pressure pipe including fitting from trenches, walls, ceilings for relaying/replacement for the following sizes all as directed :-

(a) 100 mm bore

(b) 80 mm bore

(c ) 50mm bore

(d) 40 mm bore

(e) 25 mm bore

(f) 20 mm bore

(g) 15 mm bore

Laying only in trenches after cleaning water tubing & connections with steel water tubing/Cast Iron pipe /HDPE/ polyethylene, aluminium polyethylene (PE-AL-PE) pressure pipe as retrieved from item No 1 here-in-before after cleaning, washing or removing old screw thread as required & providing new fittings, as required, complete all as specified and directed for the following sizes :-

(a) 15 mm bore tubing

(b) 20 mm bore tubing

(c) 25 mm bore tubing

(d) 40 mm bore tubing

(e) 50 mm bore tubing

(f) 80mm bore tubing

(g) 100mm bore tubing

Laying only, after cleaning water tubing & connections with steel water tubing/Cast Iron pipe/HDPE/ polyethylene, aluminium polyethylene (PE-AL-PE) pressure pipe as retrieved from item No 1 here-in-before, fixed to wall, ceiling or laid in floor after cleaning, washing or removing old screw thread as required & providing new fittings, wherever required, complete all as specified and directed for the following sizes :-

(a) 15 mm bore tubing

(b) 20 mm bore tubing

(c) 25 mm bore tubing

(d) 40 mm bore tubing

(e) 50 mm bore tubing

(f) 80mm bore tubing

(g) 100mm bore tubing

Supply, laying, testing in repair, GI tubing medium grade in trenches including new GI fitting complete all as specified and directed for the following bore :-

(a) 100 mm bore

(b) 80 mm bore

(c) 50 mm bore

(d) 40 mm bore

(e) 25 mm bore

(f) 20 mm bore

(g) 15 mm bore

Supply, fixing, testing in repair GI tubing medium grade on walls/ceiling or laid in floor including new GI fitting complete all as specified and directed for the following bore :-

(a) 25 mm bore

(b) 20 mm bore

(c) 15 mm bore

M&L for drilling & tapping of 100/150 mm bore cast iron mains in position for branch connection of 20mm bore GI pipe with MS clamps complete all as specified and directed.

Supply & fixing in repair gun metal globe gate valve with iron wheel head, screwed both ends ISI mark for the following sizes all as specified & directed :-

(a) 50mm bore

(b) 40 mm bore

(c) 25 mm bore

(d) 20 mm bore

(e) 15 mm bore

S&F in repair bib tap 15mm bore standard of PTMT any colour screwed for iron pipe and fixed complete all as specified and directed

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe suitable for 20mm dia pipe complete all as specified and directed.

M&L in repair for lead joints including spun yarn & taking out old lead by burning etc for the following bore of CI pipe /fittings complete all as specified and directed :- Note: (i) Earth work is included in rate quoted by contractor. (ii) Old lead obtained from joint shall be reused and balance as required to be provided new lead.

(a) 300 mm bore

(b) 200 mm bore

(a) 150 mm bore

(b) 100 mm bore

(c) 80 mm bore

S&F in repair GI fitting heavy duty ISI Marked i.e socket/union/tee/elbow including necessary excavation & earth work, rethreading of pipe for stoppage of leakage in different site, locations/Areas and making good as per existing surface for the following bore of pipe :-

(a) 50 mm bore

(b) 40 mm bore

(c ) 25mm bore

(d) 20 mm bore

(e) 15 mm bore

Opening, cleaning & refitting water meter/float valve/stop cock including replacement of new rubber washer etc for 15 to 25 mm bore complete all as specified and directed.

Supply & fixing in repair of cast iron body sluice valve ISI marked PN 1.0 and conforming to IS 14846 with stainless steel spindle of following sizes complete all as specified and directed.:-

(a ) 300 mm bore

(b) 200 mm bore

(c) 150 mm bore

(d) 100 mm bore

(e) 80 mm bore

Supply & fixing in repair of foot valve ISI marked including fixing accessory of following sizes complete all as specified and directed.:-

(a) 100 mm bore

(b) 80 mm bore

M&L in repair for ‘D’ joints complete with collars, rubber ring, nuts & bolts etc for following bore complete all as specified and directed.

(a) 300 mm bore

(b) 200 mm bore

(c) 150 mm bore

(d) 100 mm bore

(e) 80mm bore

(f) 50 mm bore

Supply & fixing in repairl of non return valve ISI marked including fixing accessory of following sizes complete all as specified and directed.:-

(a) 100 mm bore

(b) 80 mm bore

Supply & fixing in repair MS pipe 100 mm bore, centrifugally casted class -B both end flanged in any length fixed on swimming pool/over head reservoir with fittings (elbow/bend etc)complete all as specified and directed

Supply & fixing in repairl MS pipe 80 mm bore, centrifugally casted class -B both end flanged in any length fixed on swimming pool/over head reservoir with fittings (elbow/bend etc)complete all as specified and directed

Demolition of PCC/Black bitumin road of any description and in any position not otherwise specially provided for complete all as specified and directed.

M&L PCC (1:2:4) type B2 (using 40mm graded stone aggregate) as in repair of road cuttings complete all as spciified and directed

M&L for cement concrete in foundation, filling and mass concrete type D2 1:4:8 , using 40mm graded stone agregrate as in repair of road cuttings complete all as spciified and directed

Demolition and M&L for Brick work with sub class `B` bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complet all as specified and directed

M&L Rendering 10mm thick on fair faces of brick work or concrete surface finished even and fair complet all as specified and directed

Excavation in trenches in soft/loose soil n. exc 1.5 Mtr wide and not exc. 1.5 M deep and getting out including forming bottom surface for laying of pipes complete all as specified and directed.

Returning filling of soil including spreading, leveling, watering and well ramming in layers not exc 25 mm thick complete all as specified and directed.

Removal of excavated material to a distance not exc 50 Meter and depositing where directed at a level not exc 1.5 M above the starting point complete all as specified and directed.

M&L for Cutting of cast iron pipe in position for insertion of new tee, coller etc for the following bore: -

M & L in repair for flange joints with rubber sheet 3mm thick, including nuts, bolts etc for the following bore:-

M & L for construction of brick masonry valve pit with sub-class 'B' brick built in cement mortar (1:6), of size (90 x 90 x 90) cm (internal dimension) with one brick thick walling and 45 cm x 10 cm base foundation with PCC (1:3:6), type C2 with cement plastering 10 mm thick in cement mortar (1:4) on internal & exposed surfaces, including MS cover of size 01mtr x 01mtr made out from 3 mm thick MS sheet including (40 x 40 x 5) mm angle iron framing , 02 Nos MS hinging device and fixed on top wall of the valve pit & painting of the steel surfaces with two coats of synthetic enamel paint (first quality) over a coat of red oxide primer, including necessary earth work & demolition of the existing old valve, complete all as specified and as directed.

Supply, fixing, jointing & testing in repair cast iron fittings such as bends (any types radius and angle) tappers, collers, Tee , Y junction, plugs, caps and connecting pieces or any other special required at site for the flanged/spigot and socketed pipes complete all as specified and directed.

Taking up cast iron water mains (including all fittings) with spigot and socket ends and lead joints from trenches/ floors including burning out joints and recovering lead including removal from site complete all as directed of the following size.

(a) 300 mm bore

(b) 200 mm bore

(c) 150 mm bore

(d) 100mm bore

Relaying of CI pipe as obtained for item no 31 in trenches including cleaning of pipe line complete all as specified and directed.

(a) 300 mm bore

(b) 200 mm bore

(c) 150 mm bore

(d) 100mm bore

M&L for DI pipes ISI marked of make as specified with spigot and socket ends suitable for tyton joints, centrifugally cast, class K-9, in any length coforming to IS: 8329(2000) as per latest amendments, laid in trenches with & including making rubber gasket joints (Tyton joint) and testing on completion complete all as specified and directed for the following sizes:-

(a) 300 mm bore

(b) 200 mm bore

(c) 150 mm bore

(d) 100mm bore

M/s Singh Electric Co

M/s S.M. Construction