CWE/P-42/2020-21 SPECIAL REPAIR TO SF MD ACCN AT MANDIR AREA AND MIL GROUND UNDER AGE B/R-I OF GE (WEST) PATHANKOT

Amount

Demolition of brick or stone masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc and disposal of debris out of MoD land complete all as specified and directed.

M&L brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), complete all as specified and directed.

All as per item No 02 here-in-before but except bricks. Note : Old bricks retrieved from demolition shall be used.

M&L Brick work with sub class ‘B’ bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4, complete all as specified.

Demolition of cement concrete or lime concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) and removing the debris outside from defence land complete all as specified and as directed.

M&L for Cement concrete (1:3:6), type C-1 using 20mm graded crushed stone aggregate as in plinth protection & paving 75mm thick laid in slope finished the even & fair including making joints at every 2.5m and at corner filled with bitumen 85/25 grade and 1:2 part of sand by weight all as specified and directed

M&L 25 mm thick cement concrete in sub base for receiving floor tiles and mass concrete using (1:2:4), type B-0 using 12.5 mm graded crushed stone aggregate all as specified and directed. Note :- Finishing surfaces of concrete to be even and rough to receive the topping layer or floor tiles etc.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base to flooring/path etc, complete all as specified and directed. Note :- Finishing surfaces of concrete to be even and rough to receive the topping layer or floor tiles etc.

Demolition of cement concrete or lime concrete (un-reinforced) of any description and in any position not otherwise and removing the debris outside from defence land complete all as specified and as directed.

M&L PCC 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete all as specified and directed by Engr –in Charge

M&L for Providing cement concrete 1:2:4, type B-1, (using 20 mm graded crushed stone aggregate) mixed with water proofing compound as per manufacturer’s instructions as in roof kerbs,bands etc or mud stops, rounded or chamfered on edges cement all as specified and as directed.(Note:- WPC shall be measured and paid separately)

M&L PCC 1:5:10 type E-2 (using 40 mm graded crushed stone aggregate) as in foundations, filling and mass concrete, filling of sunken floor complete all as specified and directed by Engr –in Charge.

Rendering 15 mm thick in cement mortar 1:4 on wall & floor brick/concrete surface finished even and smooth (without using extra cement ) and mixed with water proofing compound as per manufacturer’s instructions complete all as specified and directed. (WPC shall be measured and paid separately)

M& L for (a) Cleaning of all foreign material such as fungus, mass, dust ,debris etc by brushing and dusting,washing down with water, sprinkle water on the surface and ensure water does not stand any where and making the roof surface levelled with cement mortar (1:3) of required thickness. (b) Applying a coat of approved cold applied bituminous oil based primer (IS-3384) @0.30 litre/sqm complete all as specified and directed (c) Applying roof treatment on top of roof with APP modified membrane with non-woven polyster reinforcement (centre core) with thermal insulation with white mineral gravel finish on upper side of weight not less than 3.5 kg/sqm & thickness not less than 3mm, laid by torch application method with overlap 100 mm on length side and 100 mm on the width side as per manufacturer's instructions complete all as specified and directed by Engr –in Charge.

M & L 50 mm bore ‘medium grade’ galvanized pipe as in spout including neccesary cutting to wall/beam etc and proper setting in cement mortar 1:3 , complete all as specified..

Dismantling floor, hearth, or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and removing othe debris outside from defence land complete all as specified and directed.

M&L 20mm thick granite (pure black) work (table rubbed and polished) in steps, jambs pillars, window cills ,cooking platform and like including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade or granite over including 15mm thick screed bed or bedding layer in cement mortar 1:6 etc complete all as specified and directed. Note:- The stone slab shall be in one piece over kitchen plateform,making gas pipe holes 25mm dia with rounded holes throughout the depth of granite & slab and all open edges to be half rounded.

M&L for coloured Glazed ceramic coloured tiles 450x300mm x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and including 10mm thick rough cement plaster to receive tiles in cement mortar 1:4 complete all as specified and directed. Note:-The texture ,colour ,shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and rates also including in this item for necessary raking circular cutting or notching and waste on tiles.

Supply and fix joint free non skid Ceramic tiles, coloured 7mm to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. Note:-The texture ,colour ,shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and rates also including in this item for necessary raking circular cutting or notching and waste on tiles.

Supply and fix joint free non skid Ceramic tiles, coloured 7mm to 8mm thick (square/ rectangular) polished, area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in vertical/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat/rendering in cement mortar 1:4 for fixing of tiles complete all as specified and as directed. Note:-The texture ,colour ,shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and rates also including in this item for necessary raking circular cutting or notching and waste on tiles.

M&L machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete over and including screed bed or bedding layer 20mm thick in cement mortar 1:6 complete all as specified and directed. Note :-The size of kota stone shall not be less than 55 cm x 55cm & Rate included for all cutting ,waste including machine cutting to make it square or rectangular,cutting and polishing by machine.

M&L machine cut kota stone slab flooring 20-25mm thick in riser of steps, skirting, dado over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and mirror polishing complete over and including 10mm thick screed bed in cement mortar 1:4, complete all as specified.

M&L for non abrasive paving (endura) tiles 300mm x 300mm x10mm thick (square/ rectangular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over & including 15mm screed bed in cement moratr 1:4 to match complete al as specified and directed. Note:-The texture ,colour ,shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and rates also including in this item for necessary raking circular cutting or notching and waste on tiles.

Demolition of roofs, floors (other than ground floors), beams staircases, landing, chajjas, & similar suspended work cement concrete is reinforced (reinforcement cut as required to facilitate demolition) and disposal of debris out of MoD land complete all as specified and directed.

M&L for Precast reinforcement cement concrete (1:2:4) type B-1 using 20mm graded crushed stone aggregate as in landings, cover slab (for manholes etc), chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar (1:4) complete all as specified and directed. Note : Reinforcement shall be measured and paid separately

Material and labour for RCC type B1 (1:2:4) using 20 mm graded crushed stone aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like such as cover slab of septic tank/soak well etc complete all as specified and as directed. Note:- Reinforcement shall be measured and paid separately).

M & L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat

M&L for mild steel TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia or securing with clips quality complete all as specified

Taking down cement plaster of any description and thickness on walls/ceilings etc including racking out joints, hacking for key, scrubbing down with water etc including necessary scaffolding up to four storeys height of bldgs if required and removing of debris out of MoD land complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar 1:4 mixed with liquid water proofing compound (as per manufacturer’s instructions) on fair faces of brick work ,concrete surface of wall, fin, facia, chajjas, parapet and similar article finished surface even and smooth without using extra cement including necessary scaffolding up to four storeys height of bldgs if required complete all as specified and as directed.(Note:- WPC shall be measured and paid separately)

Material and labour for two coat plaster 35 mm thick (20 mm + 15 mm) on rough concrete surfaces of fin, facia, chajjas and similar article in cement mortar 1:3 with liquid water proofing compound (as per manufacturer’s instructions) mixed in both coats, finished even and smooth without using extra cement including necessary scaffolding up to four storeys height of bldgs if required complete all as specified and as directed.(Note:- WPC shall be measured and paid separately) Note :- Two coat plaster shall be carried out as mentioned in clause 14.18 of SSR-2009, Part-I complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of wall and applying two coats of Cement Base Paint without any brush marks on the surface in any colour over and including a coat of alkali resistant primer (as per manufacturer’s recommendations) including necessary scaffolding up to four storeys height of bldgs,shade/colour shall be approved by GE, all painted areas site to be cleaned and hand over as per existing without any extra cost to Govt complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of wall and applying two coats of exterior grade emulsion paint (weather proof/weather coat) without any brush marks on the surface in any colour over and including one coat of primer (as per manufacturer’s recommendations) including necessary scaffolding up to four storeys height of bldgs,shade/colour shall be approved by GE, all painted areas site to be cleaned and hand over as per existing without any extra cost to Govt complete all as specified and as directed.

Material and labour for rendering 15 mm thick in cement mortar 1:6 on other than fair faces of brick work , concrete surfaces of wall,fin, facia, chajjas,parapet and similar article etc finishing surfaces even and smooth without using extra cement including necessary scaffolding up to four storeys height of bldgs if required complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of wall and applying 2mm thick wall care putty on the surfaces & making the surface absolutely smooth surface (as per manufacturer’s recommendations) on the surfaces and and applying two coats of distemper oil emulsion finished without any brush marks on the surface in any colour including necessary scaffolding up to four storeys height of bldgs,shade/colour shall be approved by GE, all painted areas site to be cleaned and hand over as per existing without any extra cost to Govt complete all as specified and as directed.

Material and labour for 10 mm thick rendering on brick work or concrete surfaces in cement mortar 1:3 as in ceiling of roof slab,fin, facia, chajjas,parapet and similar article etc finishing surfaces even and smooth without using extra cement including necessary scaffolding up to four storeys height of bldgs if required complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash without any brush marks on the surface including necessary scaffolding up to four storeys height of bldgs if required complete all as specified and as directed.

Material and labour for complete removal of existing treatment surface of wall and applying two coats of exterior grade emulsion paint (weather proof/weather coat) without any brush marks on the surface in any colour over and including one coat of primer (as per manufacturer’s recommendations) including necessary scaffolding up to four storeys height of bldgs,shade/colour shall be approved by GE, all painted areas site to be cleaned and hand over as per existing without any extra cost to Govt complete all as specified and as directed.

Material and labour for complete removal of existing treatment surface of wall and applying 2mm thick wall care putty on the surfaces and making surface absolutely smooth and applying one coat of primer (as per manufacturer’s recommendations) on the surfaces and applying two coats of distemper oil emulsion without any brush marks on the surface in any tint including necessary scaffolding up to four storeys height of bldgs,shade/colour shall be approved by GE, all painted areas site to be cleaned and hand over as per existing without any extra cost to Govt complete all as specified and as directed.

Material and labour for complete removal of existing treatment from ceiling surface and applying two coat of white wash on undecorated surfaces without any brush marks on the surface including necessary scaffolding up to four storeys height of bldgs if required complete all as specified and as directed.

Material and labour for complete removal of existing treatment from walls surface and applying two coat of white wash on undecorated surfaces without any brush marks on the surface including necessary scaffolding up to four storeys height of bldgs if required complete all as specified and as directed.

Material and labour for preparation of old painted wooden surfaces of any description over 10 centimetre width or girth and applying one coat of synthetic enamel paint in any colour finished without brush mark on surface including necessary scaffolding up to four storeys height of bldgs,shade/colour shall be approved by GE, all painted areas site to be cleaned and hand over as per existing without any extra cost to Govt complete all as specified and as directed.

Material and labour for preparation of old painted steel and iron surfaces of any description over 10 centimeter width or girth and applying one coat of synthetic enamel paint in any colour finished without brush mark on surfaceincluding necessary scaffolding up to four storeys height of bldgs,shade/colour shall be approved by GE, all painted areas site to be cleaned and hand over as per existing without any extra cost to Govt complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer all as specified and directed.

Material and labour for writing letters or figures (block, Roman, Italic or Indian) exceeding 15 cm high but not exceeding 30 cm high etc with synthetic enamel paint including necessary scaffolding up to four storeys height of bldgs if required,,shade/colour shall be approved by GE, all painted areas site to be cleaned and hand over as per existing without any extra cost to Govt complete all as specified and as directed.

Material and labour for Stops, commas, short lines, dashes, hyphens, brackets, etc. including necessary scaffolding up to four storeys height of bldgs, shade/colour shall be approved by GE, all painted areas site to be cleaned and hand over as per existing without any extra cost to Govt complete all as specified and as directed.

Material and labour for obliterating the old writing of any description, not exceeding 0.1 square meter, with paint to match with the existing work including necessary scaffolding up to four storeys height of bldgs,shade/colour shall be approved by GE, all painted areas site to be cleaned and hand over as per existing without any extra cost to Govt complete all as specified and as directed.

Material and labour for cutting down plants / trees of girth not exc 15 cm & surface area not exc 0.36 Sqm each from roof tops /sides of external walls of buildings, chajja, wall junctions, junctions of of rain water / soil /waste vent pipes including taking out roots entered in wall/slab surfaces and making good the surfaces including repairing the CI/GI/PVC joints of affected locations by applying TUFALO (herbal medicine )and making good to suit the adjoining surfaces using PCC type 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregate) or cement mortar 1:2 complete all as per manufacturer instructions and as specified. NOTE: Any CI/GI/PVC pipes and fittings damaged during work shall be replaced by new one to ensure leakage / seepage free joint without any extra cost to the department and Unit rate quoted by tenderer shall included for use of all scaffolding, trestles, ladders, cradles etc ,hoisting, lowering and protective measures etc up to four storeys height of bldgs and removing of debris out of MoD land complete all as specified and as directed.

Supply only `Liquid Water Proofing Compound. complete all as specified and as directed .

Taking down chowkhats or frames exc 1.50 but n.exc 4 Sqm each (without talking off shutters from the frame) complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frames) area not exc1.5 Sqm each and removing from site.

Taking down shutters of any description exc 1 sqm but not exc 2 sqm each and removing from site complete all as specified and directed.

Resecuring of easing and adjusting shutters of any description exc 1 sq. m but n exc 2 sq.m each by taking down and refixing in same opening complete all as specified and directed.

S&F 2nd class hardwood Plain, solid, straight, chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F pressed steel frames 105 x 60 x1.25 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges, lock strike plate including one shop coat of primer complete all as spd and directed

S & F pressed steel frames 125 x 60 x1.25 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges, lock strike plate including one shop coat of primer complete all as spd and directed

M & L for cement concrete type C-0, 1:3:6 using 12.5 mm graded crushed stone aggregate as in back filling of hollow portion of frame with plain cement concrete and for fixing of hold fast complete all as specified and directed.

Supplied and fixed 40mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

Supplied and fixed 35mm thick factory made 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats Note: wire cloth shall be measured separately

Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified.

S&F Solid PVC door/window frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, above but wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet complete al as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing.

S&F factory made fully glazed/wire gauge single piece front side PVC printed door shutter 35 mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails. Mild steel frame shall be covered with heat moulded plain cover pvc "c" channel having a pvc sheet strip of 20 mm width stuck inside with solvent cement for stiles & pvc laminated sheet for top rail,lock rail & bottom rail on either side and gap insert for top rail and bottom rail; panching of prelamnited sheet to be fitted in the mild steel framed welded/sealded to stiles & rails fixed with PVC sheet beading and jointed together with solvent cements. supplying and fixing in frame as per drg No-CEPZ/TD-378/11 SHEET 1/1. The rate include for Stainless Steel wire gauge of 24 gauge to be fitted inside area of stiles and rails all as specified and directed by Eng-in-charge..

S&F factory made 35 mm thick high density fibre panel board (HDF) as per shown in drawing CEPZ/C-TD/037/13 & CEPZ/C-TD/039/13 sheet 1/2 &2/2 respectively .irrespective of whatever shhown on drawing , the HDF door shutters (rails,stiles and core filling ) shall be of timber having minimum bulk density 450 kg/cum at 12 percent moisture content. the raised fibre board skin used in door shutter shall be of minimum thickness 3 mm of phenolic bonded high density fibre board conforming to the requirement given in table-2 of IS - 15380-2003.HDF door shall conform to IS : 15380-2003 and shall be approved by GE.

S&F 2nd class soft wood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each

M&L Box type steel windows and ventilator comprised of tubular frame and shutters made out of 1.25 mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter including stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm,03mm thick sheet glass ordinary quality or 03 mm thick Figured glass as directed with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150 mm long for each leaf and including 10 mm square bar grills at spacing as shown on drg welded to FI frame work, including all other fittings, hinges, handles, tarred hold fasts, PCC blocks etc all as shown on drg No CEPZ/TD-354/09 sheet 1/3 to 3/3 including two coats of synthetic enamel paint over a coat of red oxide primer including taking down existing spoiled and unserviceable windows/ventilators of any type (wooden/steel) complete all as specified and directed

Supply and fixing in repair second class hard wood plain fillets, square, rectangular or triangular in section, and secured with nails or screws, clean sawn and sectional area exc 13 Sqcm and not exc 25 Sq cm complete all as specified and directed.

M&L in repair for 18/19mm thick Prelaminated particle board,ISI marked, exterior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws rawal plug to timber frame work including all exposed edges with 6mm thick teak wood lipping and finish with french polished as in cupboards, kitchen cabinets,shelf etc complete all as specified and directed.

Supplied and fixed in repair for Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

Supplied and fixed 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished complete all as specified and directed

Supplied and fixed hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, Size of hasp and staple in mm 100 complete all as specified and directed.

S & F Continuous (piano) hinges 30mm Width of flaps (when open) ,mild steel, bright finish or electrogalvanised complete all as specified and directed

Supplied and fixed stainless steel butt hinges of size 100mm long for fixing of pvc door shutter etc complete all as specified and directed.

Supplied and fixed butt hinges medium weight 100 mm cold rolled mild steel complete all as specified and directed..

Supply and fix in repair butt hinges medium weight 100 mm cold rolled mild steel complete all as specified and directed.

Supply and fix Aluminium, anodised, barrel tower bolts of extruded section and fixed, Length of bolt 150mm complete all as specified and directed

Supply and fix Aluminium, anodised, barrel tower bolts of extruded section and fixed, Length of bolt 200mm complete all as specified and directed

Supply and fix in repair Aluminium, anodised, barrel tower bolts of extruded section and fixed, Length of bolt 150mm complete all as specified and directed

Supply and fix in repair Aluminium, anodised, barrel tower bolts of extruded section and fixed, Length of bolt 200mm complete all as specified and directed

Supply and fix Aluminium handles, cast type, anodised Size of handle 150mm complete all as specified and directed.

Supply and fix in repair Aluminium handles, cast type, anodised Size of handle Size of handle 150mm complete all as specified and directed.

Supply and fix Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixed Length of bolt in 250 mm complete all as specified.

Supply and fix in repair Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixed Length of bolt in 250 mm complete all as specified.

Supply and fix Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor Overall length of cover plate 140mm complete all as specified and directed.

Supplied and fixed 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate including welding to steel frames.complete.

Supplied and fixed in repair 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate including welding to steel frames.complete.

Supply and fixing in repair 25mm outer dia stainless steel decorative drapery rod ( Model No- SS-25FL of Vista) of thickness 20 gauge and for every 01 RM length, provide 10 numbers stainless steel wings (Model No:- SS CRNG of Vista) with 50 mm dia and proportionate for part there off, with stainless steel brackets ( Model:- SS 25 BR, Vista) near to ends with stainless steel finials ( Model:- SS-1 of Vista with adapter) for 25mm dia drapery rod at both ends. The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows Including necessary fittings

Hacking out old broken glass ( any thickness, size, quality or description ) from wooden frames or stone concrete or brick surrounds, glazed with putty or fixed with beads complete.

Supplied and fixed 3 mm thick sheet glass ordinary quality and glazing with oil putty wire clips in square n.exc 0.5 sqm in each pane upto tripple story building complete all as specified and directed.

Supplied and fixed 3mm thick figured glass, pin head type and glazing with oil putty in square n-exc 0.5 sqm in each pane upto tripple story building complete all as specified and directed.

Supply and fix in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed.

Welding in repairs n. exc 2.5cm in length thickness of metal to be welded n exc 6mm complete all as specified and directed.

Welding in repairs exc 2.5cm but n exc 5cm in length thickness of metal to be welded exc 6mm but n exc 9mm complete all as specified and directed.

Supplied and fixing peg set of 4, brass chromium plated, fancy type, superior quality and fixed with screws complete all as specified and directed.

S&F brass door magic eye: as given specification material resin lens +zinc alloy,top diameter: 31.2mm, bottom diameter approx 24mm, pipe diameter approx 16mm total length approx 50mm, inner height approx 36mm application 35 to 60mm thick viewing angle 200 degree of surrounding without opening the door unique design ultra clear view and superior finish, wide angle best in class lens for all round visibility the outsider cannot hide any ware, the back cover protects you from the outsider observing any movements inside easy to instal with inbuilt screw over a wide range of door thickness from 35 mm to 60mm etc required at site complete as directed by Engr-in-charge

Supplied and fixed solid chromium plated heavy door chain (weight not less than 249 gms) with brass screws to any type of door shutter and frame complete all as specified and directed.

Taking up or down 15mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed.

Supplied and fixed 15mm bore Steel water tubing 'medium grade', galvanised with all fittings and fixed to wall, ceiling or laid in floor complete all as specified and directed.

Fixing only 15mm bore old Steel water tubing including all new galvanized fittings and fixed to wall, ceiling or laid in floor complete all as specified and directed. Note: - Old Steel water tube/pipe any type retrieved from taking down shall be used along with all new GI fittings)

Taking up or down 20mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed.

Supplied and fixed 20mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed.

Fixing only 20mm bore old Steel water tubing including all new galvanized fittings and fixed to wall, ceiling or laid in floor complete all as specified and directed. Note: - Old Steel water tube/pipe any type retrieved from taking down shall be used along with all new GI fittings)

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed

Supplied and fixed in repair Gun-metal, globe or gate valves 15mm bore, with iron wheel head, screwed both end for iron pipe

Supplied and fixed in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of water storage tanks of capacity exc 250 litres but not exc 500 litres complete all as specified and as directed. Note: While cleaning any float valve/tank cover,GI pipe to be removed and refixed the same in position after cleaming of tank and incase of damaged during work shall be replaced by new without any extra cost to the department.

Supplied and fixed Rotational moulded polyethlene water storage tanks of 500 ltrs capacity ISI marked (cylindrical vertical with closed threaded top cover) hoisted and fixed in position all as specified in SSR Part I including Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including Dismantling of old broken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed.

Supplied and fixed in repair Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe & fixed. (min. weight 20mm-210 gms)

S & F in repair 15 mm bore long body CP Bib taps cast copper alloy fancy type with capstan heads (chromium plated),and cup screwed down , high pressure for iron pipe mpete all as spd & directed.

Supplied and fixed in repair angular stop cock/angle valve, chromium plated fancy type with coloured head and wall flange suitable for 15mm bore complete all as specified and as directed.

Supplied and fixed in repair stop valves, 15mm dia, cast copper alloy,chromium plated fancy type with long shank and cup(concealed type) screwd down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed.

Supplied and fixed in repairs Brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore complete all as specified and as directed

Supplied and fixed in repairs Brass CP shower rose 125mm size including fixing to steel pipe or union complete all as specified and directed.

S&F Towel Ring of PTMT fixed with & including CP brass screws & wooden/plastic cleats (min. weight 90 gms)complete all as specified and directed.

Supplied and fixed in repairs Tubular towel rail, ISI marked 60cm long between flanges , 20mm dia 'D' type Brass Chromium plated incl necessary brackets, fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

Supplied and fixed in repair soap dish brass chromium plated Round/oval shaped fixed to wall with PVC gutty and CP screws complete all as specified and directed.

Supplied and fixed in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

Supply and fixing in repair viterous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, witht integral foot rests (excluding flushing cistern and flush pipe) including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor complete all as specified and as directed.

Supplied and fixed in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets ,fush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specfied and as directed.

Supplied and fixed in repairs Viterous China wash basin, white, flat back, size 550x400mm excluding taps etc but including brackets,including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specfied and as directed.

Supplied and fixed in repairs sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 915 mm x460 mm and bowl size 410mmx330mmx 160mm complete all as specified and directed.

Supplied and fixed in repairs stainless steel kitchen plate rack of size 750 x 900 mm of approved make fixed with mild steel screw complete all as spd & directed.

Supplied and fixed 15mm dia 600 mm long PVC connection including brass check nut at both ends screwed both end for iron pipes.

Demolition and breaking up drain pipes (Salt glazed ware, PVC/AC or Reinforced concrete) set in cement mortar,and taking out of trenches, if required, Internal dia of pipe in 75mm/100mm

Supplied and fixed PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors all as specified and directed.

Supplied and fixed PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors all as specified and directed.

Taking down eaves gutter and rain water pipe any size any pattern , PVC/ AC pipe including all fittings ,heads shoes, bends etc including removal to store ,Internal dia of pipe in 75mm /110mm complete all as specified and directed.all as specified and directed.

Supplied and fixed PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls all as specified and directed.

Supplied and fixed PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls all as specified and directed.

Supplied and fixed PVC (SWR) bends any radius 75mm dia all as specified and directed.

Supplied and fixed PVC (SWR) bends any radius 110mm dia all as specified and directed.

Supplied and fixed in repair PVC (SWR) bends any radius 75mm dia all as specified and directed.

Supplied and fixed in repair PVC (SWR) bends any radius 110mm dia all as specified and directed.

M & L stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roof Bore in pipe in 100mm complete all as specified and as directed.

Dismantling of cast iron or reinforced concrtee drain pipes, jointed in cement mortar and taking out of trenches, if required Internal dia of pipe in 75mm/100mm complete all as specified and as directed.

Supply and fixed sand Cast iron soil, waste and vent pipes ISI marked, in any length with or without ears with cement joints, laid in trenches or in floors bore of pipe in 100mm complete all as specified and as directed.

Supply and fixed sand Cast iron soil, waste and vent pipes ISI marked, in any length with or without ears with cement joints, laid in trenches or in floors bore of pipe in 75mm complete all as specified and as directed.

Supply and fixed sand Cast iron soil, waste and vent pipes ISI marked, in any length with or without ears with cement joints, fixed to walls bore of pipe in 75mm complete all as specified and as directed.

All as per Srl item no 140 here-in-before but except pipe note: - Old Cast iron soil, waste and vent pipes any type retrieved from dismantling shall be used)

Supply and fixed sand Cast iron soil, waste and vent pipes ISI marked, in any length with or without ears with cement joints, fixed to walls bore of pipe in 100mm complete all as specified and as directed.

All as per Srl item no 142 here-in-befor but except pipe note: - Old Cast iron soil, waste and vent pipes any type retrieved from dismantling shall be used)

M & L Cast iron bends (ISI marked) (any radius) diminishing pieces or tapers (larger bore measured), bore of pipe 100mm, complete all as specified.

M & L Cast iron bends (ISI marked) (any radius) diminishing pieces or tapers (larger bore measured), bore of pipe 75mm, complete all as specified.

Material and labour for Cast iron floor trap (ISI marked) of 75mm dia of outlet, plain with grating including jointing to waste pipe with solvent cement fixed in repair, and set in cement concrete type B1 (using 20 mm graded crushed stone aggregate)1:2:4 complete all as specified and as directed.

Supplied and fixed Articles n exc 5 kg each Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire & soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters & similar articles complete all as specified and as directed.

M&L two coats of black japan painting on new iron/steel surfaces of any description over 10 cm in width or girth not otherwise described including preparation of new surface all as specified and directed.

M&L two coats of black japan painting on old iron/steel surfaces of any description over 10 cm in width or girth not otherwise described including preparation of old surface all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil. Note:-(1) The excavation work will be carried out by mannualy or mechanical means in any location/ area as directed by engr-in- charge. (2) Any dammage occur to water supply pipe line/ electric cable/existing drain/sewage line during excavation work will be make good up to satisfaction of Engr- in-charge without any extra cost to Govt.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm with any type of soil complete all as specified and directed.

Removal of excavated material (soil) to a distance not exc 250m but n. exc 500 m and depositing where directed at a level not exceeding 1.5 metre above starting point complete all as specified and directed

M&L unplastited drainage pipe 160mm dia type "B" with wall thickness 4mm(min) of pressure rating 8 KN/sqm laid in trenches and jointed with cement solvent including tsting complete all as specified and directed make jain pipes/ajay flow guard/Astra pipes including demolition and breaking up drain pipes in cement mortar including demolition of PCC bedding and hunching complete all as specified and directed

Concrete bed to drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested in Cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate for Bore of pipe in 160mm complete all as specified and directed

Dismantling structural steel work including doors gates, grills but excluding framed truss etc.complete all as specified and directed.

Supplied and fixed Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled & countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete & screwing etc. wind ties for roof including securing bolts; posts & struts in fencing/cooler stand including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.

Cutting holes in brick walls built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required,Depth of embedded portion of holddfasts or lugs measured from the face of the jamb into the wall exc Half brick but not exc one brick complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate in copings, bed plates including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings,removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.

M&L Point wiring for light/fan/bell point controlled by one switch with 1.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and including PVC rigid conduit (medium grade) having thickness as per IS code with all fittings including galvanised pressed steel sunkun boxes having thickness as specified 3mm bakalite laminated sheet for switches and sockets, including 1.5sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly including cutting, chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete all as specfied and directed. Note : (a) Colour coding is to be maintained (Ph-Red, N-Black, Half -Yellow, Earth- Green) (b) On RCC roof ceiling PVC conduit shall be provided on surface for fan with proper fixing clips all as directed.

Description all as per item No.160 here-in-before but for 5 Pin socket outlet 5 Amps point on independent board with PVC insulated copper conductor cable 1.5sqmm complete all as specified and directed.

All as per above item no 160.00 here in before but for one 3 pin socket outlet 5 amp on same board all as specified and directed.

All as per above item no 160.00 here in before but call bell point complete all as specified and directed.

M&L Point wiring with 2.5 sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS with and including PVC rigid conduit (medium grade) having thickness as per IS code with all fittings including galvanised pressed steel sunkum boxes having thickness as specified 3mm bakalite laminated sheet for one 3 pin socket outlet 15 Amp on independent board including 2.5sqmm single core PVC insulated unsheathed multistranded copper conductor FRLS as earth continuity conductor connected to common earth dolly including cutting, chiseling for concealed piping and making good disturbed surface area and white wash/colour wash to matching with the existing colour complete all as specfied and directed. Note : (a) Colour coding is to be maintained (Ph-Red, N-Black, Half -Yellow, Earth- Green) complete all as specified and directed.

M&L Switch piano flush type 5 Amp 240 Volts single pole one way, (ISI marked), complete all as specified.

M&L Switch piano flush type 15 Amp 240 Volts single pole one way, (ISI marked), complete all as specified.

M&L Socket outlet 2 in 1, 3 pin , 5 Amp flush type, 240V complete all as specifed.

M&L Socket outlet 2 in 1, 3 pin, 5 & 15 Amp flush type, 230V complete all as specifed.

M&L Lamp holder insulated body with bakelite back plate having matching colour to holder for angle/batten fittings complete all as specified and directed.

M&L Electric bell 230 volts AC supply single pole all as specified and directed by Engineer-in-Charge.

M&L unsv Switch bell push flush type 5 Amp 240V (ISI marked) complete all as specified & directed

M&L Ceiling rose, 65x50mm three terminals complete all as specified & directed

S&F ceiling fan regulator electronic socket type 5 stage speed variation ISI marked complete all as specified & directed

M & L LED bulkhead 10 watt connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm all as required complete all as specified and directed.

S&F in replacement of CFLs with LED smart lamp, B22 type 14 watt all as specified & directed

Taking down ceiling fan by disconnecting the electric connection & dismantling the blades & removing from ceiling/roof of bldg by descrewing the nut bolt etc complete all as specified and directed. Note : Old u/s balance ceiling fans will be deposited in the store yard.

Rehanging only of ceiling fan and connecting up including provision of PVC insulated and overall sheathed flexible copper conductor cable 3 core of size 0.50 Sqmm from ceiling rose or connector to fan including minor repairs such as replacement of locking pin, hanging bracket, reel insulators, bolts, nuts, capacitor 2.5 mfd, bearing of suitable size etc and spraying one coat of synthetic enamel paint of required color all as per required and directed by Engr-in-Charge.

M&L for poroviding./cutting the round/square hole of required size in wall finishing the same for dsitributed surfaces complete all as specified and supply and fixing plastic ventilation fans, single phase, 230V, 150mm sweep complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor

S & F energy saving decorative LED box type with Led Rod 20 watt (4 Feet), 230 volts, 6500 K energy efficient tube light fitting extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete with all accessories prewired and including making connections with 3 core twisted flexible copper cable of size 23/.0076 from ceilling rose/PVC connector to light fittings. (Note power factor should not be less than 0.95) complete all as spd and directed.

S & F in replacement of sheet metal enclosure MCB distribution board, double door with IP-43 protection single phase 240 volts 8 way, including suitable size copper bus bar and neutral link fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification complete all as specified and directed by Engr-in-charge.

M & L MCB SP 240 volts any rating from 20 to 40 ampsamps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed by Engr-in-charge.

M & L MCB SPN 240 volts any rating from 6 to 40 amps, with rupturing capacity 10 KA, including providing thimble for out going cablescomplete all as specified and directed by Engr-in-charge.

Supply and laying in replacement of existing unserviceable/ burnt submain wiring alongwith two single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of size 6 sqmm drawing into and including concealed PVC rigid non metallic conduit of 20mm dia , 1.8 mm wall thickness and single core cable PVC insulated and unsheathed cable with copper conductor FRLS (multistrand) of 6 sq mm as earth wire including cutting chases in brick wall, rendering in cement mortar 1:4 and making good the disturbed surfaces to match existing complete all as specified & directed. Note: (i) Two runs of 6 Sqmm single core PVC insulated copper conductor cable(FRLS) and one run of 6 sqmm copper conductor cable (FRLS) as a earth lead and one run of PVC conduit of 20mm dia , 1.8 mm wall thickness wiil be measured as a one unit. (ii) Proper colour coding is to be followed as per IS Specification. (iii) Test certificates of cables to be submitted before commencement of work/ claiming for payment. (iv) wiring shall be concealed/ on surface with rigid PVC conduit medium grade as per site requirement.

S & F in replacement of old unsv sheet metal enclosures distribution boards, double door three phase 415 volts 4 ways vertical TPN DB for comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following (a)MCCB four pole 100 Amp AC 415 volts 25 KA=01 NO as incoming and 12 nos. MCB SP 40 Amps, C series as outgoing (Note :- (i)The DB shall be VTPN (ii) The DB shall be flush fixed ,and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii) connection of theMCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble -properly crimped. (iv) all the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) double continuous earth wire shall be provided for each three phase DB from earthing mains dolly (vi)MCCB's and MCB's should have a same make as of DB.

Supply and fix bldg security light fittings with LED security light fittings 25 watt, 5700 K, IP-66 having pressure die cast aluminium alloy housing, prismatic polycarbonate cover complete including making connection with 3 core copper flexible cable of suitable size including galvanised iron medium grade pipe bracket 1.5 metre long of 32 mm dia with clamps etc and fixing with bldg for fixing of street light fitting all as directed. Notes :- (i) Contractor shall produce LM79 & LM 80 test report from OEM owned NABL accredited laboratory. (ii) Contractor shall give guarantee/ warranty of complete fitting/ fixture for minimum 2 years from the date of completion. (iii) Contractor shall conduct the inspection of company representative at site before installation of the material at no extra cost. (iv) Contractor shall arrange complete material at site for approval of GE before incorporation in the work. (v) Driver shall be IP 66 degree of protection potted seal type with inbuilt SPD and external SPD of capacity 10 KV to be provided in addition to inbuilt.

M&L Earthing complete with galvanised steel earth plate electrode of size (600 x 600 x 6) mm thick buried directly into ground vertically to depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, connected to galvanized iron wire 4mm dia as earth lead by means of bolts,nuts and washers of GI up to test point,earh lead wire of size 4.0 mm by means of lugs, bolts, nuts, washer, check nuts of galvanised iron or steel all as shown in Electrical plate No. 3 of SSR Part I, wire protected by dia 15 mm bore light grade GI Pipe laid in floor and fixed to wall with proper size of clamps and watering pipe of bore 20 mm dia GI medium grade including wire mesh funnel, PCC, earth chamber pit with PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggreate including necessary form work, cement mortar including CI Pit cover with frame necessary excavation and earth work in any type of soil including testing on completion for desired result all as specified. Note: The rate quoted include cost of 7.5 metre earthing wire with protection pipe.

Notes : The Schedule of Credit amount shall be deducted from the total of this schedule(BoQ) to arrive at Contract Sum.

M/S Raghuvanshi Builders

M/S AV BUILDERS

RAJESH SHARMA AND COMPANY

kay gee construction co