SPECIAL REPAIRS TO CERTAIN ROADS AT AHILYANAGAR MIL STN UNDER GE (N) AHILYANAGAR

Amount

M&L Repairs to pot holes any depth n.exc 1 Sqm each incl. sweeping free from dust and mud water scoring sunken surfaces in roads, paths, etc. cutting round edges to at least 25 mm in depth and making good by filling in screened and graded road metal watering and well ramming (incl supply of metal) and making good by applying tack coat @ 5 kg per 10 Sq.m,using paving bitumen VG-10 putting in pre mix as specified for thin bituminous carpet (2 cm thick) well rammed and sealed with sand seal coat (6.8 kg of binder with 0.60 cum of sand) again well rammed (including supply of pre mix binder and sand) depth of pot holes not exc 30mm all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n'exc 400 sqm, exc 50mm and n exc 100 mm deep complete all as specified and as directed.

Soling (or sub base) 200mm thick with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber complete all as specified and as directed.

Materia, Laying and compacting 150 mm thick (compacted thickness) two layers of 75mm each Wet Mix Macadam (WMM) grading as per table 400-13 of MaRTH specifications for Road and Bridge works 2013 manufactured in WMM plant material comprising of clean, crushed, graded aggregate and granular material premixed with wate to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-1 OOKN static weight and consolidating to required gradien and camber complete all as specified and directed. The finished surface tolerances to be as per Table 900-1 of MoRTH specifications for Road and Bridge works 2013

M&L for preparing existing unsurfaced WBM/WMM surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and Applying evenly a prime coat of Cationic Bitumen Emulsion SS1 confirming to IS: 8887 at a rate of application of 0.85 kg/sqm on surface of WMM IVVBM as specified in Table 500-3 of MoRTH specification for road and bridge works 2013, using mechanical sprayer complete all as specified and directed .

M&L for premixed bituminous macadam laid using mechanical paver for any width of road, rolled & compacted to required gradient and camber (consolidated thickness 75mm or less) with binder content (paving VG - 30 grade bitumen) of min. 4% by weight of total mix all as specified & directed. Note: 4% binder content shall be for pricing purpose only. Any deviation in minus side shall be adjusted as specified in Particular specifications and no price adjustment shall be made for plus side variation.

M&L for preparing existing black top surface surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally cleaning the surfaces with mechanical compressor to remove all loose dirt etc and applying evenly a tack coat of Cationic Bitumen Emulsion (RS-1) conforming to IS: 8887 at a rate of application of 0.25 kg/sqm on bituminous surface as specified in Table 500-5 of MoRTH specification for road and bridge works 2013, using mechanical sprayer after cleaning of existing surface as specified and directed.

M&L forapplying evenly a tack coat of Cationic Bitumen Emulsion (RS-1) conforming to IS: 8887 at a rate of application of 0.25 kg/sqm on bituminous surface as specified in Table 500-5 of MoRTH specification for road and bridge works 2013, using mechanical sprayer after cleaning of existing surface as specified and directed.

M&L for premixed bituminous semi-dense asphaltic concrete 30mm consolidated thickeness laid using mechanical paver for any width of road with max 5.00% binder content, paving butimen VG-30 grade by weight of total mix, rolled and compacted to required camber and gradient using 8 to 10 tonne power roller complete all specified & directed. Note: 5% binder content shall be for pricing purpose only. Any deviation in minus side shall be adjusted as specified in Particular specifications and no price adjustment shall be made for plus side variation.

M&L for painting lines,dashes, arrow letters etc on road pavement, parade ground etc providing & applying 2.0 mm thick road marking strips (reflective ) of specified shade/colour using hot thermoplastic material by fully/semi automatic application machine fitted with profile stone heater driven by experienced operator on road surfaces including preparation of previously treated surfaces, cleaning surfaces of all dust, scales oils grease and foreign materials etc complete all as specified and directed.

M&L Moorum/Red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed (Consolidated thickness shall be measured)

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions. fixed all as per manufactureres instructions and as specified and directed. Make:- 3M/Greenlite

M/S Anil Enterprises (BID ID -3290272)

L.T Associate (BID ID -3286603)

sardar construction (BID ID -3287327)