SITC of Inverter Type Hot and Cold AC units in Radiology Orthodontics Sections and Ceiling Fans in Girls Hostel at GDC and H Srinagar.

Supply, Installation, testing, and commissioning of Hot and Cold 1.76/2.0 TR DC inverter Type Split AC Unitcomprising of indoor and outdoor units with R-410A/32A Refrigerant (Green Gas) having twin rotary compressor, indoor Motor, Outdoor Motor, Expansion Valve and a remote-control unit with allied accessories. ACshould be suitable for operation on 50 Hz single Phase AC Supply both the indoor and outdoor units shall be installed on wall and wall/floor brackets respectively as per requirement to hold the units and should be complete with all default accessories as per OEM like Hooking arrangements, Fixtures, frames for holding indoor and for resting outdoor units, Drainage Piping etc .The price is exclusive of cabling,copper tubing and nitrile foam.

Providing, Fitting, Testing and commissioning Copper tubing of following size along with jointing, bending etc for liquid flare and gas flare and duly insulated by Elastomeric nitrile rubber along with fixtures, saddles, ties etc

Minimum 6.35 mm Dia./AS RECOMMENDED BY OEM

Minimum 12.7 mm Dia./AS RECOMMENDED BY OEM

SITC of 5 kVA automatic voltage stabilizer single phase with high cut and low cut & allied safety/protections, wall mounted designed at input voltage range of 150-220 volts and output voltage range of 220-240 volt along with the wall mounting brackets and necessary fittings. The job encompasses carrying out repairs to the walls wherever the same are cut. the stabilizer shall have digital meter showing input, output voltage and load of the AC. The item shall confirm to IS 8448 (1989).

Providing, laying and fitting of 2.5 sqmm, 4 core, FRLS (flame retardant low smoke) insulated unarmored sheathed copper cable (Communication Cable). The item shall conform to IEC 60502 and IS-694:2010

Providing, laying and fitting of 4 sqmm, Single core, FRLS (flame retardant low smoke) insulated unarmored sheathed copper cable. The item shall conform to IEC IEC 60502 and IS-694:2010

Providing and laying of 20 mm PVC conduit/channel with flexible Conduit wherever required along with fixtures,bends,junction box union, saddle wherever applicable.

Providing and fitting of 2 Pole 32-Amp c-curve, MCB with Circuit Breaking Capacity, Icn=10kA, inside Powder Coated Steel Enclosures to be fitted for each AC unit. The item shall confirm to is/IEC 60898 and IEC 60947-2.

Providing and fitting of 16 Amp ISI marked 3 pin,2 pin switch socket with on/off switch SS cobmbne along with 16 Ampere 3 pin Top arrangeemnt including all fixtures