Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹30.5 LAccepted-AOC SHOP NO 13 45 FEET ROAD BHARAT COLONY FARIDABAD HARYANA 121014 | FARIDABAD | HARYANA | 121014 | L-1 | Accepted-AOC L-1 | |
| 2 | L-2₹30.9 L+₹43,615.50 (1.43%)Rejected-Finance | L-2 | Rejected-Finance L-2 | |
| 3 | L-3₹33.0 L+₹2.5 L (8.14%)Rejected-Finance | L-3 | Rejected-Finance L-3 | |
| 4 | L-4₹33.3 L+₹2.8 L (9.29%)Rejected-Finance | L-4 | Rejected-Finance L-4 | |
| 5 | L-5₹36.1 L+₹5.6 L (18.2%)Rejected-Finance 3788 SHAH GANJ GB ROAD NEW DELHI 110006 | NORTH | DELHI | 110006 | L-5 | Rejected-Finance L-5 |
| Sl No | Description | Qty | Unit | M/S Anand Enterprises L5 | GARG CONSTRUCTION CO L7 | High Tech Metal India L3 | J P Enterprises L4 | Haryana EngineerService L1 | M/S Parshant Associates L6 | SAGAR ENTERPRISES L2 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | M&L for brick work with sub class 'B' bricks, straight or curved on plan not exc 6m mean radius built in cement mortar (1:6), complete all as specified and directed by the Engineer-in-Charge. | 5 | Cum | 3,000 ₹15,000 | 4,000 ₹20,000 | 200 ₹1,000 Lowest | 2,900 ₹14,500 | 5,000 ₹25,000 | 4,500 ₹22,500 | 3,300 ₹16,500 |
| 2.00 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) and removing rubbish off the premises, complete all as specified and directed by the Engineer-in-Charge. | 55 | Sqm | 10 ₹550 Lowest | 40 ₹2,200 | 15 ₹825 | 40.5 ₹2,227.5 | 500 ₹27,500 | 10 ₹550 Lowest | 10 ₹550 Lowest |
| 3.00 | M&L for first quality glazed ceramic coloured tiles of (450x300mm) x 7 mm thick, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in cement mortar (1:4) set and jointed in neat cement plaster of honey like consistancy and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed by the Engineer-in-Charge. | 10 | Sqm | 800 ₹8,000 | 700 ₹7,000 | 580 ₹5,800 | 520 ₹5,200 Lowest | 950 ₹9,500 | 700 ₹7,000 | 650 ₹6,500 |
| 4.00 | M&L for first quality fully vitrified ceramic tiles, light shade, 9-10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 Sq.m, laid in floors with neat cement slurry over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed by Engineer-in-Charge. | 40 | Sqm | 700 ₹28,000 | 750 ₹30,000 | 790 ₹31,600 | 500 ₹20,000 Lowest | 1,100 ₹44,000 | 800 ₹32,000 | 899 ₹35,960 |
| 5.00 | M&L for first quality fully vitrified ceramic tiles, 9-10 mm thick (square/ rectangular) polished, light shade, area of each tile not exceeding 0.36 Sq.m, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10 mm thick cement plaster in cement mortar (1:4) set and jointed in neat cement plaster of honey like consistency and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed by Engineer-in-Charge. | 5 | Sqm | 700 ₹3,500 | 750 ₹3,750 | 800 ₹4,000 | 550 ₹2,750 Lowest | 1,200 ₹6,000 | 800 ₹4,000 | 850 ₹4,250 |
| 6.00 | Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land, complete all as specified and directed by the Engineer-in-Charge. | 70 | Sqm | 5 ₹350 | 20 ₹1,400 | 10 ₹700 | 40 ₹2,800 | 30 ₹2,100 | 4 ₹280 Lowest | 10 ₹700 |
| 7.00 | M&L for rendering 12 mm thick in cement mortar (1:6) on fair faces of brick works or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed by the Engineer-in-Charge. | 90 | Sqm | 200 ₹18,000 | 125 ₹11,250 | 150 ₹13,500 | 100 ₹9,000 | 999 ₹89,910 | 180 ₹16,200 | 90 ₹8,100 Lowest |
| 8.00 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) mixed with water proofing compound @ 3 % by weight of cement, finished even and smooth without using extra cement, complete all as specified and directed by the Engineer-in-Charge. | 10 | Sqm | 200 ₹2,000 | 190 ₹1,900 | 160 ₹1,600 | 100 ₹1,000 | 2,000 ₹20,000 | 180 ₹1,800 | 90 ₹900 Lowest |
| 9.00 | M&L for preparation of new plastered or un-plastered wall surfaces of any description and applying two coats of oil bound distemper over a coat of 2mm thick wall care putty, complete all as specified and directed by the Engineer-in-Charge | 90 | Sqm | 35 ₹3,150 | 50 ₹4,500 | 40 ₹3,600 | 30 ₹2,700 Lowest | 200 ₹18,000 | 30 ₹2,700 Lowest | 30 ₹2,700 Lowest |
| 10.00 | M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade on walls, complete all as specified and directed. | 10 | Sqm | 20 ₹200 Lowest | 50 ₹500 | 20 ₹200 Lowest | 40 ₹400 | 500 ₹5,000 | 30 ₹300 | 30 ₹300 |
Tender Value
₹44.6 L
EMD Value
₹89,240
Closing Date
16 Aug 2025, 6:00 pmClosed
GE (AF) FARIDABAD
GE (AF) FARIDABAD
PROVN OF HOT WATER SUPPLY IN KITCHEN, SOLAR STREET LIGHT WORKS AND CERTAIN MINOR WORKS AT AF STN DADRI UNDER AOR OF GE (AF) FARIDABAD
2025_MES_722834_1
GE (FBD)/AF-T-52/2025-2026
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
Dadri
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) FARIDABAD
₹89,240
Yes
6 Oct 2025
26 Jul 2025
19 Aug 2025
26 Jul 2025
16 Aug 2025
2 Aug 2025
Amount
M&L for brick work with sub class 'B' bricks, straight or curved on plan not exc 6m mean radius built in cement mortar (1:6), complete all as specified and directed by the Engineer-in-Charge.
Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) and removing rubbish off the premises, complete all as specified and directed by the Engineer-in-Charge.
M&L for first quality glazed ceramic coloured tiles of (450x300mm) x 7 mm thick, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10mm thick cement plaster in cement mortar (1:4) set and jointed in neat cement plaster of honey like consistancy and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed by the Engineer-in-Charge.
M&L for first quality fully vitrified ceramic tiles, light shade, 9-10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 Sq.m, laid in floors with neat cement slurry over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed by Engineer-in-Charge.
M&L for first quality fully vitrified ceramic tiles, 9-10 mm thick (square/ rectangular) polished, light shade, area of each tile not exceeding 0.36 Sq.m, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including 10 mm thick cement plaster in cement mortar (1:4) set and jointed in neat cement plaster of honey like consistency and pointed in white or coloured cement to match the shade of tiles, complete all as specified and directed by Engineer-in-Charge.
Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land, complete all as specified and directed by the Engineer-in-Charge.
M&L for rendering 12 mm thick in cement mortar (1:6) on fair faces of brick works or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed by the Engineer-in-Charge.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) mixed with water proofing compound @ 3 % by weight of cement, finished even and smooth without using extra cement, complete all as specified and directed by the Engineer-in-Charge.
M&L for preparation of new plastered or un-plastered wall surfaces of any description and applying two coats of oil bound distemper over a coat of 2mm thick wall care putty, complete all as specified and directed by the Engineer-in-Charge
M&L for preparation of new plastered surfaces and applying two coats of cement base paint of approved shade on walls, complete all as specified and directed.
M&L for plain cement concrete type B-1(1:2:4) using 20 mm graded stone aggregates as bed block, coping, cills, steps etc. including necessary formwork, complete all as specified and directed by the Engineer-in-Charge.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed.
S&F 1.25mm thick pressed steel frames for doors of size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.
S&F 30 mm thick, factory made, flush shutters, solid core construction, with block board core and plywood face panels, commertial type on both sides, fitted to chowkhats of 2nd class hard wood (Hollock), complete all as specified and directed by the Engineer-in-Charge.
S&F 100mm butt hinges, medium weight, cold rolled mild steel and fixed, complete all as specified and directed.
S&F 150 mm Aluminium handles, cast type, anodised of extruded section complete all as specified and directed.
S&F 200mm aluminium, anodised, barrel tower bolts of extruded section and fixed etc complete all as specified and directed.
S&F for aluminium alloy, anodized, door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy and fixed length of bolt 250 mm, bolts not less than 16mm dia with and including a minimum of 6 bolts not,four on bolt plate and two on staple plate complete (ISI marked), complete all as specified and directed by the Engineer-in-Charge.
M&L for preparation of new wooden surface any description not otherwise described and exc 10cm width or girth applying two coats of synthetic enamel paint over a coat of prink primer all as specified and directed.
S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the direction by Engineer-in-Charge.
S&F 12mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations on one side & other side balancing with white lamination, fixed with screws to timber frame work, complete all as specified and directed.
S&F for collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed.
S&F for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, complete all as specified and directed.
M & L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
S&F structural steel as in roof trusses (framed), trussd purlins, crane gantries, rails and fastenings and heavy bracket framing( Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe 410 -W (Gde - E 250 quality A), complete all as specified and directed.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in side of path / benching / coved fillets etc rounded or chamfered on edges incl necessary form work, complete all as specified and directed.
S&F 15mm bore GI tubing 'medium grade' with all connectiong fitting and fixed completed to wall with suitable clamps and ceiling or laid in floors including boring holes into brick wall where as necessary, complete all as specified and directed by Engineer-in-Charge.
S&F PVC connections 15mm size with PTMT nuts of length 450 mm for water supply, complete all as specified and directed.
S&F 15mm angle valve, chromium plated with wall flange and fancy type with high pressure screwed down and with CP flange of same make completed all as specified and directed by Engineer-in-charge.
S&F 15mm dia. Chromium plated sink mixer for mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed by Engineer-in-charge.
M&L for submain wiring with 2X6.0 SQMM+1X4.0SQMM Earth Wire single core PVC insulated FRLS sheathed copper cable connecting to common earth dolly in and including heavy duty PVC concealed Conduit of size 25mm complete all as specified and directed. Note:- 02 run of 6 Sqmm cable, 01 run of 4 Sqmm cable and one run PVC casing caping/ conduit shall be measured as one run
S&F Anti-Suicide fan rod (12'') white/brown, MS pipe zinc plated, 19 mm OD, 1.8+/-0.05 mm thick,spring set grade 3 carbon steel material zinc plated, MSME tested for performance test and opening at impact load of 22 kgf+ and spring 'hidden in the pipe' will expand to about 1 mtr or more complete all as specified and directed. Make:- Gold life or any other equivalent as approved by GE.
M&L for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to and including using galvanised iron strip 25×4mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth plate surrounded by packed layer of char coal dust and common salt, 15cm thick all around bottom and top and watering pipe 20mm bore of GI light grade with funnel, wire mesh and 40 mm dia GI protection pipe medium grade all as shown in electrical plate No 3 of SSR Part-I and connected to earthing test point, main switch board and testing on completion including excavation, earth work concrete pit with 80mm thick RCC cover in RCC 1:2:4 type B-1 duly reinforced with MS bars 8mm dia @ 150C/C both ways and pit chamber in PCC 1:2:4 type B-1 with 2 Nos suitable lifting handles of 12mm MS bar, compete all as specified and directed by Engineer-in-Charge.
M&L for point wiring for 3 pin socket outlet 6/16 amp independent with colour coding multistranded copper conductor cable, PVC insulated and unsheathed size 4.0 sqmm with PVC conduit on wall/ surface/ concealed ( dia not less than 25 mm) with fixing accessories for one independent 15 Amp Power socket point controlled by one switch with pressed steel concealed terminal boxes covered with 3 mm thick laminated sheet incl continuous earth wire of PVC insulated unsheathed multistranded copper conductor cable size 4.0 sqmm for earth wire connected to common earth dolly, complete all as specified and directed.
S&F Modular switch, 1 way, 16 A, 1 module, complete all as specified and directed by Engineer-in-Charge.
S&F Socket, 6A/16A -2/3 pin combined, 2 module, complete all as specified and directed by Engineer-in-Charge.
S&F White cover plate with frame, 3 module complete all as specified and directed by Engineer-in-Charge.
S&F Metal flush box, 3 module, complete all as specified and directed by Engineer-in-Charge.
M&L for submain wiring with 2X4.0 SQMM+1X2.5 SQMM Earth Wire single core PVC insulated FRLS sheathed copper cable connecting to common earth dolly in and including heavy duty PVC concealed Conduit of size 25mm complete all as specified and directed. Note:- 02 run of 4 Sqmm cable, 01 run of 2.5 Sqmm cable and one run PVC casing caping/ conduit shall be measured as one run.
S&F for commissioning & testing ESE based lightining arrestor Model name , Protech Streamer 20 (Protected area 32 meter Radius on Level 1 and 77 meter Radius on Level III ) single spike complete with chemical earthing all connections and acceessories for a range of 25 mtrs complete all as specified and as directed by Engr-in-charge .
S&F for PVC insluated stranded copper conductor cable of size 70 sqmm, single core, flexible from Lightning arrester to Earthing properly fixed with saddles and on insulators, complete all as specified and directed.
M&L for installation of GI Mast with insulator and necessary accessories 5 Mtr height including all neccessory civil and grouting works, nuts bolts washers complete all as specified and directed by Engineer-in-charge.
S&F Lightning Strike Counter ( 6 digit ) incl all connections , fixing on wall etc nuts bolts all as specified and as directed by Engineer-in-Charge.
S&F for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm, drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw complete all as specified and directed.
S&F Copper strip 32x6mm fixed with top of insulator/saddles, fixing with screws , washer etc with help of drill machine for roof conductors and down conductors above ground and and making good disturbed surfaces of walls, floors, etc all as specified directed.
M&L for Chemical earthing , Design development supply commissioning and testing EHCC certified ground terminal earthing system hollow tube solid bar CCPRI tested for sensitive signal/Electrical equipments highly anti corrosive long life severe wear conditions in the earth pit and of standard size ISI marked copper tube out side secondary conductor of 50mm dia and main primary conductor inside 25mm dia 3000mm length ready to install with suitable connecting terminal confirming to IS:3043 1987 specification highly conducive packing material to be filled in earth pits for providing uniform low resistivity anti corrosive hygroscopic medium around the earth system for improving the efficency of current dissipation 20 Kg per bag (3 bag per kit) min or sufficeient quantities required as per site complete incl PCC pits of inside dimension 0.5x0.5x0.5m and suitable cover complete all as specified and directed. Note:- Chemical earthing shall be carried out from the approved manufacturer by GE.
Supply , Fixing & laying GI tubing light grade 40 mm dia used as protection pipe for earth lead strip in earthing or alongwith pole / wall/ culvert / drainage etc for mechanical protection of cable complete all as directed. Note: All required items and accessories , bend, joints, nut bolts, clamps etc are incl in quoted rates.
M&L for submain wiring with 2X4.0 SQMM+1X4.0SQMM Earth Wire single core PVC insulated FR sheathed copper cable connecting to common earth dolly in and including heavy duty PVC concealed Conduit of size 25mm, complete all accessories complete all as specified and directed. Note:- 02 run of 4 Sqmm cable, 01 run of 4 Sqmm cable and one run PVC casing caping/ conduit shall be measured as one run.
S&F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole 20 amps MCB complete all as specified and directed by Engineer-in-Charge.
Supply and fix Instant Geyser, 3 Ltr capacity, 230 V equipment powerful heating element, complete all as specified and directed by Engineer-in-Charge.
Supply and Fix All-in-One Solar Street Light high power LED cool white (6000k-6500k) Mono Crystalline Solar PV Module, Lithium ion / Lithium Ferro Phosphate battery with PIR sensor , High Efficacy LED, 30W aluminium extructed body , All - in - One SSL specially designed by progressive Intelligent Dimming which automatically control the dimmimg and brightness of light for 12hours mode with 100% brightness on movement detection limited to 2 hours or 240 cycles of PIR and 33% brightness for rest of time till morning , which increse the backup time having Over Charge Protection, Deep Discharge Protection, Over current Protection, Short circuit Protection, Over Voltage Protection with following tech specification :- (a) Working Temperature : -25°C to 65° C (b) Solar PV Module: 12V60W- Mono-Crystalline (c) Battery (LiFeP04) with BMS : 12.8 V 24 Ah (d) Backup : 2 days (e) Efficiency : > 93 % (f) lumious Efficacy : 125 lumen / Watt (g) Colour Temp : 5700 K (h) life Span : > 50000 hr (i)Driver : Inbuild DC-DC type (j)Body : Aluminum Extructed Body
Supply and errection in true vertical position 6 mtr long MS pole on pcc foundation suitable for 47 m/s wind speed with 4-8, 590mm PCD of foundation bolts complete with MS base plate of 300mmx300mmx6mm at bottom and swages from base to top in such manner that 114.3mm x 3.65mm upto 3 metres, 88.9mm x 3.25mm upto 1.5 metres , 76.1mm x 3.25mm upto 1.5 metres, above base plate with arm to fix solar street light at top and final tape plug, bolts, nuts, washers and screws incl painting with black bituminous paint two coat over one coat or red oxide primer after errection complete and marking pole number on pole complete all as specified and directed. Note : (i) Excavation and removal of soil included in quoted rate. (ii) PCC foundation work shall be measured and paid separately. (ii) Description as per direction of Engineer-in-Charge will be printed on each pole without any extra cost.
M&L for PCC 1:3:6 type C-2 using 40 mm grade stone aggregate as in foundation for LT pole/ foundation mass filling or path/hard standing etc as required on site complete all as specified and directed by Engineer-in-Charge.
M&L for PCC 1:2:4 type B-2 using 20 mm grade stone aggregate for coping of pole using extra cement for smooth finish including form work/ foundation mass filling or path/hard standing etc as requiredd on site complete all as specified and directed by Engineer-in-Charge.
M&L for PCC 1:4:8 type D-2 using 40 mm grade stone aggregate as in bed for pole in foundation filling and mass concrete/foundation mass filling or path/hard standing etc as required on site complete all as specified and directed by Engineer-in-Charge.
SAGAR ENTERPRISES (BID ID -3396011)
High Tech Metal India (BID ID -3396282)
J P Enterprises (BID ID -3388310)
M/S Anand Enterprises (BID ID -3385657)
M/S Parshant Associates (BID ID -3386538)
GARG CONSTRUCTION CO (BID ID -3388436)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .