Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹15,800Admitted-Finance | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/S ISHAN ELECTRICAL and MECH. ENGG. WORKS |
|---|---|---|---|---|
| 1.01 | Periodic service of the departmental Pick-up Vehicle JK08P-8889 (Isuzu SCAB-Z). The work shall begin with the complete draining of old engine oil and refilling with fresh 5W30 grade engine oil ≈4 litres. It includes the replacement of the oil filter element (1 no.), gasket for the drain plug (1 no.), and gaskets for the filler plug (1 no.). Following the replacement, a thorough check shall be conducted to identify and rectify oil leaks, if any.
The job includes the removal of the old air cleaner filter (ACL) and cleaning of the air intake housing. A new air filter shall be provided and installed. In addition, the air conditioning system will be serviced by cleaning the A/C vents and radiator fins. The filter for the blower unit (cabin filter) will be replaced to ensure optimal airflow and air quality inside the vehicle.
The brake system shall be addressed by replacing the front brake pads and carrying out inspection and cleaning of the brake callipers and disc surfaces. All associated hardware shall be checked. Suspension components such as shocks, bushings, and linkages shall be visually inspected for wear, tear, or leakage. Any unusual noises or play shall be examined, rectified, and all critical nuts and bolts shall be retorqued as a preventive measure.
All essential fluids will be checked and replenished as needed. These include the coolant, brake fluid, manual transmission oil, rear differential oil (axle), windshield washer fluid, and Diesel Exhaust Fluid (DEF). Additionally, the Diesel Particulate Filter (DPF) shall be checked for soot or ash buildup. Regeneration shall be initiated where required, including manual/physical cleaning if excessive deposits are found.
The vehicle’s electrical system shall be tested, including battery voltage and charging health. All lights and electrical accessories shall be inspected to confirm proper functioning. Both wiper blades shall be replaced to ensure clear visibility during operation.
The maintenance job includes comprehensive vehicle cleaning. Exterior washing shall consist of high-pressure water wash, foam and shampoo wash, tyre and underbody wash. The interior will be vacuum cleaned, including seats, floor area, and floor mats. Dashboard and interior panels will be wiped using microfiber cloth, and interior trims will be polished for a neat appearance.
Finally, wheel alignment is to be carried out to ensure accurate steering geometry including tyre rotation. A post-service road test will be conducted to confirm correct handling and steering feel following alignment and other mechanical adjustments. The scope of work includes the cost of all materials, labour, applicable taxes, and any incidental items necessary for the complete and satisfactory execution of the job. | 1 | Job | 16,400 ₹16,400 Lowest |
| 1.02 | Rebate on old parts | 1 | Nos | 600 ₹-600 Lowest |
Tender Value
₹16,750
Closing Date
6 Sept 2025, 2:00 pmClosed
Executive Engineer Mech and Hospital Div Kathua
Executive Engineer Mech and Hospital Div Kathua
Periodic servicing of Departmental Pick up Vehicle JK08P 8889 Isuzu SCAB Z
2025_PWDJK_283519_1
e-NIT No - MHDK/TECH/e-NIT/2025-26/27 dated 07-08-2025
Open Tender
Machineries/ Mechanical Engg Items
Lump-sum
15 days
Mechanical and Hospital Division Kathua
As per SBD
3 documents required · 3 mandatory
₹600
Executive Engineer Mech and Hospital Div Kathua
Executive Engineer Mech and Hospital Div Kathua
19 Sept 2025
7 Aug 2025
8 Sept 2025
7 Aug 2025
6 Sept 2025
9 Aug 2025
9 Aug 2025
Periodic service of the departmental Pick-up Vehicle JK08P-8889 (Isuzu SCAB-Z). The work shall begin with the complete draining of old engine oil and refilling with fresh 5W30 grade engine oil ≈4 litres. It includes the replacement of the oil filter element (1 no.), gasket for the drain plug (1 no.), and gaskets for the filler plug (1 no.). Following the replacement, a thorough check shall be conducted to identify and rectify oil leaks, if any. The job includes the removal of the old air cleaner filter (ACL) and cleaning of the air intake housing. A new air filter shall be provided and installed. In addition, the air conditioning system will be serviced by cleaning the A/C vents and radiator fins. The filter for the blower unit (cabin filter) will be replaced to ensure optimal airflow and air quality inside the vehicle. The brake system shall be addressed by replacing the front brake pads and carrying out inspection and cleaning of the brake callipers and disc surfaces. All associated hardware shall be checked. Suspension components such as shocks, bushings, and linkages shall be visually inspected for wear, tear, or leakage. Any unusual noises or play shall be examined, rectified, and all critical nuts and bolts shall be retorqued as a preventive measure. All essential fluids will be checked and replenished as needed. These include the coolant, brake fluid, manual transmission oil, rear differential oil (axle), windshield washer fluid, and Diesel Exhaust Fluid (DEF). Additionally, the Diesel Particulate Filter (DPF) shall be checked for soot or ash buildup. Regeneration shall be initiated where required, including manual/physical cleaning if excessive deposits are found. The vehicle’s electrical system shall be tested, including battery voltage and charging health. All lights and electrical accessories shall be inspected to confirm proper functioning. Both wiper blades shall be replaced to ensure clear visibility during operation. The maintenance job includes comprehensive vehicle cleaning. Exterior washing shall consist of high-pressure water wash, foam and shampoo wash, tyre and underbody wash. The interior will be vacuum cleaned, including seats, floor area, and floor mats. Dashboard and interior panels will be wiped using microfiber cloth, and interior trims will be polished for a neat appearance. Finally, wheel alignment is to be carried out to ensure accurate steering geometry including tyre rotation. A post-service road test will be conducted to confirm correct handling and steering feel following alignment and other mechanical adjustments. The scope of work includes the cost of all materials, labour, applicable taxes, and any incidental items necessary for the complete and satisfactory execution of the job.
Rebate on old parts
stage.html
html • 0.02 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .