Electrification Work Nagar Nikay

Amount

Supply of following materials as per RESSPO/PuVVNL norms at the work site.

STP Pole (SP-55) 11 mtr long

M.S channel, 100x50x2240 mm (Top-channel)

M.S.Channel (125*65*1300)mm T-Off

Droper Channel M.S. 100x50x2000 mm

MS angle 75x75x6, 2080mm with clampe & Nut bolt (TF Base)

PCC Pole 8.5mtr long

11KV 3Core 185sqmm XLPE Cable

X-Arm M.S. Angle(65*65*6)mm V-Type 11KV

11KV Disc Insulator with fitting (Polymer)

11KV Pin Insulator with Pin &nut

100KVA 11/0.4KV TRANSFORMER NEW

ACSR Weseal Conductor

Stay Complete

Earthing Complete

Cross breacing MS Angle with Clamps, N&B

G.I. Wire 6SWG&10SWG for gaurding lacing

3 x 185mm2 11 KV XLPE cable O/D Jointing KIT

AB Cable (3X95+1X70+1X16)sqmm

200/100/5A Outgoing 11KV VCB panel

M.S. GAURDING ANGLE (65x65x6 mm, 1.6 m long) for gurding at single support with clamp

G.I.Pipe 6"Dia

HDPE PIPE 6 DIA

DEAD END CLAMP WITH EYE HOOK(INSULATED)

SUSPEN. CLAMP WITH EYEHOOK & HOLD. CLAMP

PIERCING CONNECTORS 16-16 SQ.MM

PIERCING CONNECTOR 95-95 SQ.M.M.

Distribution box

DISTRIBUTION BOX CLAMP

POLE CLAMP WITH NUT & BOLT(IN NOS)

CROSS ARM HOLDING CLAMP WITH BOLT & NUTS

T-Off,Top,Dropper Clamp with nut&bolt

F- bracket for 11 Kv Line

Nut -Bolt with washer

Work of following materials as per RESSPO/PuVVNL norms at the work site.

Erection of Sectional Double Pole Structure of PCC pole including digging of pit, fitting of accessories, back filling of earth, grouting of each pole & stay sets & other required works.

Erection of Sectional Double Pole Structure of STP pole including digging of pit, fitting of accessories, back filling of earth, grouting of each pole & stay sets & other required works.

Errection of single STP in clay digging of pit fittings all acessories, grounting of pol 1:4:8 ratio of cement of concrete as per Resspo.

Errection of single PCC in clay digging of pit fittings all acessories, grounting of pol 1:4:8 ratio of cement of concrete as per Resspo.

11 KV 3x185 sq mm XLPE Cable Laying Digging of trench size 0.75x0.75 mtr & putting layer of sand of bottam & laying of cable covering the trench from sites & top by laying bricks finely cover the same by earth.

Making of Jointing Kit of cable box size 3x185 mm2 11 KV outdoor type

Construction of Plinth, foundation & Installation of 11 KV VCB 200/100/5A

Stringing & sagging of LT line upto proper sag including laying of Cable LT ABC (3x50+1x35+1x16) Sq mm Conductor, binding with insulators & jumpering.

Stringing of ACSR Weasel Conductor With Pin & Disc Insulator

11 KV 3x185 sq mm XLPE Cable (200 mtr.) Laying Digging of trench for Ralway Crossing, Drilling of railway track by HDD machine to cross the railway track By HDPE Pipe at Robertsganj (100x2 Mtr)

Mounting of distribution box with clamp on PCC Pole and connection with piercing connector

Erection of 100 T/F On Double Pole S/S Base & Connection of all accessories

KHAN ENTERPRISES