Repair/ Replacement of Internal Wiring /Light Fittings and Fixtures and Allied MISC Work at CQA(V) and DAD under GE(S) Ahmednagar

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, ceiling roses, pendants, regulators, sockets etc but excluding DBs, light fittings etc and making good disturbed surfaces of walls, floors etc. and matching with existing surface all as specified and as directed.

M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sqmm for phase and neutral, single core, multistranded copper conductor cable of 1100 Volts grade,conforming to IS-694 1990, PVC insulated and unsheathed , FRLS cable drawn through and including PVC casing and caping (ISI marked) and its accessories such as Tee, elbow, jointer, elbow corner etc. fixed on surface of walls, coloumns/ beams alongwith 1.5 Sqmm copper conductor cable (multistranded) PVC insulated and unsheathed FRLS cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boards for mounting switches, sockets, fan Regulators, accessories etc as specified and directed for one light point or one fan point controlled by one, one way switch NOTE: 1.Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black). 2. All points shall be earthed up to fixtures i.e holders,tube lights,all lights,ceiling lights,bulkhead lights,bldg security lights etc.

All as per serial item No. 2 but for one 3 pin socket outlet, 5 Amps on same board with other switches

All as per serial item No. 2 but for one 3 pin socket outlet, 5 Amps on independent board.

All as per serial item No. 2 but for one 3 pin socket outlet, 5 Amps on independent board but below the switch board of light points in the same vertical plane.

All as per serial item No. 2 but for one light point controled by two, two way switch

All as per serial item No. 2 but for one bell point controlled by one bell push

All as per serial item No. 2 but with 2.5 Sqmm, PVC copper stranded cable FRLS type for phase, neutral and earth for one 15 Amp, 6 pin socket on independent board.

M&L for point wiring with two runs of 1.5 sqmm for phase and neutral, single core, multistranded copper conductor cable of 1100 Volts grade, conforming to IS-694 1990, PVC insulated and unsheathed , FRLS cable laid / fixed and including concealed in PVC rigid conduit on walls/ceiling alongwith 1.5 Sqmm copper conductor cable (multistranded) PVC insulated and unsheathed FRLS cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boards for mounting switches, sockets, fan regulators, accessories etc as specified and directed for one light point or one fan point controlled by one, one way switch complete all as specifed and as directed. NOTE: 1.Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black). 2. All points shall be earthed up to fixtures i.e holders,tube lights,all lights,ceiling lights,bulkhead lights,bldg security lights etc.

All as per serial item No. 9 but for one 5 Amp, 5 pin socket outlet point on same board with other switches including earth wire as specified.

All as per serial item No. 9 but for one 3 pin socket outlet, 5 Amps on independent board.

All as per serial item No. 9 but for one bell/buzzer point controlled by one push button on the same board with other switches or independent.

All as per serial item No. 9 but for one 3 pin socket outlet, 5 Amps on independent board but below the switch board of light points in the same vertical plane

All as per serial item No. 9 but for one light point controlled by 2 way switches.

All as per serial item No. 9 but with 2.5 Sqmm, PVC copper stranded cable FRLS type for phase, neutral and earth for one 15 Amp, 6 pin socket on independent board.

S&F switch piano, flush button, 5 Amp, single pole, one way, 230 volts, white finish, all as specified & as directed.

S&F socket outlet, flush type, 5 pin, 5 Amp, multipurpose, 230 volts, single pole, one way suitable for 3 pin/2pin, 5 Amp plug top white/ivory finish all as specified & as directed.

S&F switch socket combination, flush type, 5 pin, 5 Amp, multipurpose, 230 volts, single pole, one way, suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & as directed.

S&F switch socket combination, multipurpose, flush type, 2 in 1 type (6 pin ) 5/15 Amps, 230V, AC. all as specified & as directed.

S&F bell push, flush type, 5 Amp, single pole, 230 volts, white finish all as specified & as directed.

S&F switch piano, flush button, 5 Amp, single pole, 2 way, 230 volts, white finish all as specified & as directed.

S&F fan regulator, step type, electronic on existing phenolic laminated sheet, 5 step, socket type, 230 volts, 450 watts, suitable for ceiling fan 1200/1400mm sweep all as specified & as directed.

S&F modular switch, piano type, 5 Amp, single pole, one way, flush type, white or ivory, ISI marked all as specified and as directed.

S&F modular switch, piano type, 15 Amp, single pole, one way, flush type, white or ivory, ISI marked all as specified and as directed.

S&F modular switch, piano type, 5 Amp, single pole, two way, flush type, white or ivory, ISI marked all as specified and as directed.

S&F modular bell push, piano flush type, one way, ISI marked all as specified and as directed

S&F modular socket outlet, 3 pin, 5 Amps, flush type, ISI marked all as specified and as directed

S&F modular socket outlet, 6 or 5 pin & 15 Amps, flush type, ISI marked all as specified and as directed

S&F bell, AC, 230 volts, single phase complete all as specified and as directed.

S&F electric door bell, 230 V, multi music type, ISI marked all as specified and as directed

S&F lamp holder insulated, PVC / polycarbonate /bakelite body complete all as specified and as directed.

S&F ceiling rose surface bakelite 65x50mm three terminal complete all as specified and as directed.

S&F rotary stepped type, electronic, modular, fan regulator, flush type on the existing phenolic laminated sheet all as specified and as directed.

S&F in repairs, MCBs, SP 6 to 32 Amps, 10 KA, 'C' curve, IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and as directed.

S&F in repairs, MCB, SPN 32 Amps, 10 KA, 'C' curve, IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and directed.

S&F in repairs, MCB, SPN 40 to 63 Amps, 10 KA, 'C' curve, IS/IEC 60898-1 2002 marked fixing in DBs complete all as specified and directed.

S&F in repairs, single pole & neutral DB, 4 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 100 Amp rating copper bus bar complete all as specified and as directed.

S&F in repairs, single pole & neutral DBs, 8 Ways, double door, protection class IP-43 suitable for mounting MCB, DBs conforming to IS-13032, IS-8623, BS-5484 with min 100 Amp rating copper bus bar complete all as specified and as directed.

S&F in repairs, factory made, sheet steel distribution boards, TPN, 4 way, protection class IP-43 with minimum 100 Amp rating copper bus bar, provision for FP MCB as incomer and SP MCBs as outgoing complete complete all as specified and as directed .

S&F in repairs, MCCB four pole 63A, Icu16KA, thermal magnetic, 415v AC complete all as specified and as directed.

S&F in repairs, MCCB four pole 100A, Icu16KA, thermal magnetic, 415v AC complete all as specified and as directed.

S&F in repairs, LED Tube light fitting, 20 Watt with LED light source 6500k with uniform light output,with all accessories including its connection with 3 core seathed copper conductor cable of size 0.5 sqmm with complete with all as specified and directed. Make: HAVELLS LED PRIDE ESSENTIAL Cat No LHEXAWP71N1W020 or equivalent makes in Crompton/ Philips/ wipro/ Halonix/ Century LED/Luker.

S&F in repairs, LED Tube light fitting, 10 Watt with LED light source 6500k with uniform light output,with all accessories including its connection with 3 core seathed copper conductor cable of size 0.5 sqmm with complete with all as specified and directed. Make: HAVELLS LED PRIDE ESSENTIAL Cat No LHEXACP7LN1W010 or equivalent makes in Crompton/ Philips/ wipro/ Halonix/ Century LED/Luker.

S&F in repairs, 110 mm x 110 mm size, flat panel square fixture, slim,compact, aluminium die cast lit panel, recess mounting 1 x 6 watt, 230 volt with opal diffuser and sepatate electronic driver, LED light source 6500K with uniform light output, with all accessories including three core copper cable 23/0.0076 from ceiling rose to light fittings complete all as specified & as directed. Make :- Havells Cat Part No OCTANE LED PANEL SQUARE Item Code LHEBAEP71Z1W006 or equivalent makes in Crompton/ Philips/ wipro/ Halonix/ Century LED/Luker.

S&F in repairs, 180 mm x 180 mm size, flat panel square fixture, slim, compact, aluminium die cast lit panel , recess mounting 1 x 15 watt, 230 volt with opal diffuser and separate electronic driver, LED light source 6500K with uniform light output, with all accessories including three core copper cable 23/0.0076 from ceiling rose to light fittings, complete all as specified & as directed. Make :- Havells Cat Part No OCTANE LED PANEL SQUARE,Item Code LHEBAEP71Z1W015 or equivalent makes in Crompton/ Philips/ wipro/ Halonix/ Century LED/Luker.

S&F in repairs, 210 mm x 210 mm size, flat panel square fixture, slim,compact, aluminium die cast lit panel, recess mounting 1 x 18 watt, 230 volt with opal diffuser and sepatate electronic driver, LED light source 6500K with uniform light output, with all accessories including three core copper cable 23/0.0076 from ceiling rose to light fittings complete all as specified & as directed. Make :- Havells Cat Part No OCTANE LED PANEL SQUARE Item Code LHEBAEP71Z1W018 or equivalent makes in Crompton/ Philips/ wipro/ Halonix/ Century LED/Luker.

S&F in repairs, 600 mm x 600 mm size, ultra slim, recess mounted LED luminaire of capacity 36 watt, with driver, for soft glare free light, AC 230 volt complete with all acessories and connections, complete all as specified & as directed. Make : Havells Cat Part NoSTRATO2X2PLR36WLED830MOD or equivalent makes in Crompton/ Philips/ wipro/ Halonix/ Century LED/Luker.

S&F in repairs, PLUTO NEO LED Panel of 36 watt made from extruded aluminium housing frame (pendant) 4 ft X 1 ft all as specified and as directed. Make : Havells Cat Part No PLUTONEO4X1PLR36WLED840S or equivalent makes in Crompton/ Philips/ wipro/ Halonix/ Century LED/Luker.

S&F in repairs, post top lantern, LED type, 40 watt, 230 watt, AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp all fittings and accessories complete all as directed by Engr-in-Charge. Make : Havells Cat Part No RUBYPT40WLED757PSYMTOPC or equivalent makes in Crompton/ Philips/ wipro/ Halonix/ Century LED/Luker.

S&F in repairs, (Trim cosmo surface round) surface mounted downlight 18 watt with white powder coated polycarbonate decorative housing and pressure die cast heat sink having efficiency with heavy duty driver having THD less than 10% complete all as specified and as directed. Make: Havells Cat Part No. Code - LHEAAHP7ILW018 of Havells or equivalent makes in Crompton/ Philips/ wipro/ Halonix/ Century LED/Luker.

S&F surface mounted, decorative round plastic bulk head LED luminaire comprising of high brightness LED's, IP54 protection, 10 watt, 6000K complete fitting with LED lamp, driver and all other fixing accessories including electric connection connecting with using flexible copper wire twin core upto ceilling rose/connector including taking down old unserviceable light fitting any type complete all as specified and as directed. Make :Havells Cat Part No. Code - RUBGYGENX10WLED865SSYMBOPC or equivalent makes in Crompton/ Philips/ wipro/ Halonix/ Century LED/Luker.

S&F in repairs, security light fitting of building with single piece new generation energy savng and environmental friendly, long life, LED 30W, made up of pressure die cast aluminium housing with acrylic covers as diffuser with IP66 protection and impact resistance of IK07 including one bracket made of light grade GI Pipe 25 mm dia, 1.5 mtr long, fixed to wall/ pole with two clamps made out of mild steel flat iron 40 mm x 5 mm and connect to nearest electric supply by two core 1.5 sqmm aluminium cable all as specified and as directed. Make : Havells Cat No LHEXAY7PN6K030 or equivalent makes in Crompton/ Philips/ wipro/ Halonix/ Century LED/Luker.

S&F in repairs, LED edge lit panel drivers of capacity 15 W/18 W with universal connector for easy installations complete all as specified and as directed. Make: HAVELLS Cat No OCTANE LED PANEL DRIVERS LSSLNW0170 or equivalent makes in Crompton/ Philips/ wipro/ Halonix/ Century LED/Luker.

S&F in repairs, LED edge lit panel drivers of capacity 36 W/42 W with universal connector for easy installations complete all as specified and as directed. Make: HAVELLS Cat No LEDDRIVER36V36WS or equivalent makes in Crompton/ Philips/ wipro/ Halonix/ Century LED/Luker.

S&F in repairs, LED 9W Bulb, 230 Volts AC supply, all as specified and directed.

S&F in repair, LED tube rod, 20 Watt, suitable for 36W/40W tube light fitting complete all as specified and as directed.

S&F in repairs, PVC casing caping, 32 mm, with fixing accessories such as lock nuts, saddles hook etc complete all as specified and directed.

S&F in repairs, PVC rectangular box of 100 mm x 100mm x 50 mm deep, for mounting of switch, sockets, fan regulators, etc.complete with screws and washers, etc. all as specified and as directed.

S&F in repairs, PVC rectangular box of 175 mm x 100mm x 50 mm deep, for mounting of switch, sockets, fan regulators, etc.complete with screws and washers, etc. all as specified and as directed.

S&F in repairs, PVC rectangular box of 200 mm x 150mm x 50 mm deep, for mounting of switch, sockets, fan regulators, etc.complete with screws and washers, etc. all as specified and as directed.

S&F in repairs, PVC rectangular box of 250 mm x 200mm x 50 mm deep, for mounting of switch, sockets, fan regulators, etc.complete with screws and washers, etc. all as specified and as directed.

S&F in repairs, PVC rectangular box of 350 mm x 300mm x 50 mm deep, for mounting of switch, sockets, fan regulators, etc.complete with screws and washers, etc. all as specified and as directed. Note for item Nos 58 to 62 : Cutting of board for mounting switch,sockets, fan regulators etc. shall be included in the quoted rate and shall be as per site requirement.

S&F in repairs, modular cover plate frame, 2 module complete all as specifed and as directed.

S&F in repairs, modular cover plate frame, 4 module complete all as specifed and as directed.

S&F in repairs, modular cover plate frame, 6 module complete all as specifed and as directed.

S&F in repairs, modular cover plate frame, 8 module complete all as specifed and as directed. Note for item Nos 63 to 66 : (i) Item shall be executed to attend day to day complaints. (ii) Burnt/damaged fitting only shall be replaced.(iii) Wiring is not included in the item.

S&F in repairs, PVC insulated, sheathed cable with stranded aluminium conductor service cable of size 4 sqmm, two core complete all as specified and as directed.

S&F in repairs, PVC insulated, sheathed cable with stranded aluminium conductor service cable of size 6 sqmm, two core complete all as specified and as directed.

S&F in repairs, PVC insulated, sheathed cable with stranded aluminium conductor service cable of size 10 sqmm, two core complete all as specified and as directed.

S&F in repairs, 5/6 Amp plug top 230 volts, single pole, white/ivory finish all as specified & as directed.

S&F in repairs, 15/16 Amp plug top 230 volts, single pole, white/ivory finish all as specified & as directed.

Taking down, strip opening, cleaning all parts and packing of ceiling fan of any make and size and greasing ball bearing with specified quality grease and re-assembling the fan as a one unit and re-fixing ceiling fan at the existing site / rooms and connected with 23/0.0076 three core PVC flexible cable from ceiling rose to fan etc complete all as specified. Note : Replacement of spare parts, rewinding, painting, cable for connection etc to be measured and paid separately under relevant items of Sch 'A' Part mentioned here in after.

Taking down, strip opening, cleaning all parts and packing of exhaust fan of any make and size and greasing ball bearing with specified quality grease and re-assembling the fan as a one unit and re-fixing exhaust fan at the existing site / rooms and connected with 23/0.0076 three core PVC flexible cable from ceiling rose to fan etc complete all as specified. Note : Replacement of spare parts, rewinding, painting, cable for connection etc to be measured and paid separately under relevant items of Sch 'A' Part mentioned here in after.

Taking down, strip opening, cleaning all parts and packing of Table/cabin/Air circulating fan/ wall mounting fan of any make and size and greasing ball bearing with specified quality grease and re-assembling the Table/cabin/Air circulating fan/ wall mounting fan as a one unit and re-fixing Table/cabin/Air circulating fan/ wall mounting fan in position and re-commissioning the same including making electric connection complete all as specified and directed. Note : Replacement of spare parts, rewinding, painting, cable for connection etc to be measured and paid separately under relevant items of Sch 'A' Part mentioned here in after.

M&L for preparation of old painted surfaces of ceiling fan of any make and size and applying one coat of synthetic enamel white paint by spray painting complete all as specified and as directed.

M&L for preparation of old painted surfaces of exhaust fan of any make and size and applying one coat of synthetic enamel grey paint by spray painting complete all as specified and as directed.

M&L in repairs, for short circuit /over heated winding from stator of ceiling fan of any make having 1200mm sweep with matching gauge and turns of super enamelled copper winding wire complete with leathered paper, glass sleeves, varnishing, baking etc all as specified and as directed.

M&L in repairs, for short circuit /over heated winding from stator of ceiling fan of any make having 1400mm sweep with matching gauge and turns of super enamelled copper winding wire complete with leathered paper, glass sleeves, varnishing, baking etc all as specified and as directed.

M&L in repairs, for short circuit /over heated winding from stator of exhaust fan of any make upto 300mm sweep with matching gauge and turns of super enamelled copper winding wire complete with leathered paper, glass sleeves, varnishing, baking etc all as specified and as directed.

M&L in repairs, for short circuit /over heated winding from stator of exhaust fan of any make exceeding 300mm but not exceeding 450mm sweep with matching gauge and turns of super enamelled copper winding wire complete with leathered paper, glass sleeves, varnishing, baking etc all as specified and as directed.

M&L in repairs, for short circuit /over heated winding from stator of table/Air circulating/ cabin/ wall mounting fan any make any sweep. with matching gauge and turns of super enamelled copper winding wire complete with leathered paper, glass sleeves, varnishing, baking etc all as specified and as directed

M&L in repairs, for gun metal bush with suitable size, gun metal bush for ceiling fan any make, any size and sweep all as specified and as directed

M&L in repairs, for ball bearing of size No 6201 for any type/make of ceiling fan including testing complete all as specified and as directed. Make : NBC/SKF/SBBI/TATA

M&L in repairs, for ball bearing of size No 6202 for any type/make of ceiling fan including testing complete all as specified and as directed. Make : NBC/SKF/SBBI/TATA

M&L in repairs, for canopy (top and bottom) of ceiling fans any make / size with canopy of matching colour all as specified and as directed.

M&L in repairs, rubber reel with nut, bolts, split pins etc of ceiling fan with rubber reel heavy duty for hanging fan all as specified and as directed.

M&L in repairs, for down rod with clamps etc of ceiling fan with down rod of 15mm bore medium grade GI pipe 0.45 metre long with clamps, bolts, nuts, split pins washers of suitable size of approved quality all as per specified and as directed.

M&L in repairs, for down rod with clamps etc of ceiling fan with down rod of 15mm bore medium grade GI pipe 0.60 metre long with clamps, bolts, nuts, split pins washers of suitable size of approved quality all as per specified and as directed.

M&L in repairs, for down rod with clamps etc of ceiling fan with down rod of 15mm bore medium grade GI pipe 1.50 metre long with clamps, bolts, nuts, split pins washers of suitable size of approved quality all as per specified and as directed.

M&L in repairs, for connector block of ceiling fan of suitable size of approved quality all as per specified and as directed.

M&L in repairs, for capacitor of ceiling fans with capacitor having capacity 2.5mfd, 240 Volts all as per specified and as directed. Make : Bajaj/Epcos/Havells

M&L in repairs, for capacitor of ceiling fans with capacitor having capacity 3.15mfd, 240 Volts all as per specified and as directed. Make : Bajaj/Epcos/Havells

M&L in repairs for capacitor of ceiling fans with capacitor having capacity 4mfd, 240 Volts all as per specified and as directed. Make : Bajaj/Epcos/Havells,

M&L in repairs, for blades of 1200mm sweep ceiling fan of any make with aluminium blades duly painted including provision of screws etc fixing purpose complete all as specified and as directed.

M&L in repairs, for blades of 1400mm sweep ceiling fan of any make with aluminium blades duly painted including provision of screws etc fixing purpose complete all as specified and as directed.

M&L in repairs, for blades of table/air circulating/ cabin/ wall mounting fan, aluminium/ plastic body including provision of screws etc fixing purpose all as specified and as directed.

M&L in repairs, for cable/wire for connection of fan with flexible copper cable 3 core of size 23/0.0076 all as specified and as directed.

M&L in repairs, for clamp of down rod for hanging of ceiling fan with nuts, bolts, washers and split pin complete all as specified and as directed.

Taking down carefully water Geyser 25/50 ltrs capacity by unscrewiring nuts bolts, water inlet/outlet pipes from walls/foundation complete including refixing in position after carrying out under mentioned repair including making connectin to the water inlet, outlet pipe, electric connection and testing complete all as specified and as directed.

M&L for prepairing the old painted 25/50 ltrs capacity Geyser surfaces by scraping and rubing of old painted surface and painting with one thick coat of synthetic enamel white paint by spray gun complete including proper drying including writing MES No all as specified and as directed.

M&L in repairs, cord flexible PVC insulated size 40/0.0076 three core copper conductor cable from geyser to 15 amp socket/ Metal clad complete all as specified and as directed.

M&L in repairs, base assembly of geyser with inlet and outlet pipe made out of copper base plate with gasket and proper size of nuts, bolts & washers etc suitable for 25 ltrs capacity geyser complete all as specified and as directed.

M&L in repairs, geyser element 1.5 KW rubber gasket type including rubber gasket all as sepecified and as directed. Make: Bajaj/Theeta/Power pack

M&L in repairs, geyser element 2 KW rubber gasket type including rubber gasket all as sepecified and as directed. Make: Bajaj/Theeta/Power pack

S&F in repairs, geyser safety valve (Pressure release valve) complete suitable for vertical type geyser all as sepecified and as directed.

S&F in repairs, 15mm dia non return valve, made out of brass, fixed in vertical position all as sepecified and as directed.

S&F in repairs, outer tank sheet cover, made out of MS sheet of suitable size for geyser of size 25 ltrs capacity vertical type complete all as sepecified and as directed.

S&F in repairs, inner tank, of suitable size of geyser having capacity 25 ltrs (vertical type) all as sepecified and as directed.

S&F in repairs, indicator lamp, 220 Volts, AC, suitable for 25/50 ltrs capacity of geyser all as sepecified and as directed.

S&F in repairs, sheet metal enclosures with plug socket, single pole and neutral with two pin and earth plug with one MCB of 20 Amps (SP) complete all as specified and as directed.

S&F in repairs, stainless steel flexi connection pipe, 300mm long with brass end terminal all as specified and as directed. Make : Havells of Cat Part No GSSGGX0030 or equivalent as approved by GE.

S&F in repairs, stainless steel flexi connection pipe, 450mm long, with brass end terminal all as specified and as directed. Make : Havells of Cat Part No GSSGGX0030 or equivalent as approved by GE.

S&F in repairs, thermostat switch, pointer type, suitable for 25/50 ltrs capacity geyser with adjustment knob complete all as specified and as directed. .Make : Bajaj/Theeta/Power pack

Supply and proper filling glass wool in between inner and outer tank of geyser complete all as specified and as directed.

M&L for sub main wiring with 2 runs of 4 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20 mm dia non metallic PVC grey conduit conforming to IS-9537 / suitable size casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduitcomplete all as specified and as directed.

M&L for sub main wiring with 2 runs of 6 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20 mm dia non metallic PVC grey conduit conforming to IS-9537 / suitable size casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 6 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduitcomplete all as specified and as directed.

M & L for sub main wiring with 2 runs of 10 sqmm, single core, PVC insulated & unsheathed cable conforming to IS-694, 1100 volts with copper conductor multi stranded drawn in and including 20 mm dia non metallic PVC grey conduit conforming to IS-9537 / suitable size casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 10 sqmm single core PVC insulated & unsheathed copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduitcomplete all as specified and as directed.

M&L in repairs/replacement earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to the GI wire 4 mm dia , by means of nut bolts, check nuts and washer of the GI . Earth wire connected upto main earth point/DBs alongwith 15mm dia GI pipe, medium grade, including provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick RCC (1:2:4) cover with reinforced with 8mm dia mild steel TMT bars @ 100mm centre to centre both way and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified including testing on completion.

Arihant Construction

metro electrical services

ASHWAMEDH ENGINEERS

KAMINS CARE

SONU ENTERPRISES

vedant engineering enterprises

M/s. Chhtrapati Construction(Propa. Lokesh Anant Salunke)

M/S SVOJAS ELECTROMECH ENTERPRISES