PROVN OF CENTRAL MEDICAL GAS PIPE LINE SYSTEM ALONGWITH OTHER CONNECTED WORK AT MH SURANKOT UNDER GE 881 EWS

Amount

Supply, installation, commissioning and testing of Oxygen Manifold: Main confirming to ISO standards with 3x2 Cylinder Each bank Oxygen Manifold (without cylinders), suitable to withstand a pressure of 145 Kg/cm2, along with high-pressure copper annealed tail pipes with end Brass adapter suitable for Oxygen Cylinders and manifold. Top frame comprising of high-pressure copper pipes of size 1/2” I.D. x 15swg with high pressure brass fittings made of high tensile brass and connections through non- return valves; high pressure copper tail pipes, made of high-pressure copper pipe of size 1/4” I.D. x 15 swg. The design of middle and bottom frames should be provided to fit both round and flat bottom cylinders safely. The manifold shall be tested (hydraulically) at 3500 psig and necessary test certificates accompany along with the supply. Only Non-Halogenated Polymer materials are to be used in the Non-Return Valves supplied along with the manifold. Make Oxicareengineers/Globalmedlife Solution/Lifeline Medisol/Aktiv or equivalent approved make of HQ CENC.

Supply, installation, commissioning and testing of Emergency Oxygen Manifold: Main confirming to ISO standards with 1+1 Cylinder bank Oxygen Manifold (without cylinders), suitable to withstand a pressure of 145 Kg/cm2, along with high-pressure copper annealed tail pipes with end Brass adapter suitable for Oxygen Cylinders and manifold. Top frame comprising of high-pressure copper pipes of size 1/2” I.D. x 15swg with high pressure brass fittings made of high tensile brass and connections through non- return valves; high pressure copper tail pipes, made of high-pressure copper pipe of size 1/4” I.D. x 15 swg. The design of middle and bottom frames should be provided to fit both round and flat bottom cylinders safely. The manifold shall be tested (hydraulically) at 3500 psig and necessary test certificates accompany along with the supply. Only Non-Halogenated Polymer materials are to be used in the Non-Return Valves supplied along with the manifold. Make Oxicareengineers/Globalmedlife Solution/Lifeline Medisol/Aktiv or equivalent approved make of HQ CENC.

Note for item Sl No 1 and 2: The cylinders required will be measured and paid separately. The rate inclusive for the provn of cylinder brackets and fixing chains which will be zinc plated for cylender placing arangement. The manifold should be tested hydraulically at 250kg/sqcm and the rate inclusive for the same. Each header bar shall be with pigtail connections to suit cylinder valves as per IS 3224. The copper tail pipes are fitted to the individual non return valves of the cylinder manifold for easy removal of cylinders without disturbance to system operation and the rate incluive for the same.

Supply installation, testing and commissioning of oxygen Back Pressure Compensated flow meter with control range of 0 – 15 lpm (calibration within + 10%) with 250 ml humidifier bottle made of unbreakable polycarbonate material and autoclavable at 121-degree Centigrade temperature. The flow meter shall be strict precision, durability standard and body shall be made of brass chrome plated materials. The flow tube and shroud components shall be made of clear, impact resistant polycarbonate. Flow Tube shall have large and expanded 0 – 5 lpm range for improved readability at low flows with Inlet filter of stainless-steel wire mesh to prevent entry of foreign particles complete all as directed. Make Oxicareengineers/Globalmedlife Solution/Lifeline Medisol/Aktiv or equivalent approved make of HQ CENC.

Supply, installation, testing and commissioning of Copper piping 15 mm OD x1.0 mm thick with complete fittings / fixtures as per technical specification and BS: 13348 and piping should be carried out as per approved medical standards with atmost cleanliness. All pipe joints should be made using inert gas fluxless brazing method. All joint should be of copper to copper and should be brazed by silver filter material without flux while being brazed joints shall be continuously purged with oil free dry nitrogen to prevent the formation of copper oxide on the inside surface of the joints. All existing and proposed exposed pipe should be painted with two coat of synthetic enamel paint color codification as per IS 2379 of 1963 and approved medical standards. Make Maxflow/Janya/Metal Gem/Cuber or equivalent approved make of HQ CENC.

Supply, installation, testing and commissioning of Copper piping 12 mm OD x1.0 mm thick with complete fittings / fixtures as per technical specification and BS: 13348 and piping should be carried out as per approved medical standards with atmost cleanliness. All pipe joints should be made using inert gas fluxless brazing method. All joint should be of copper to copper and should be brazed by silver filter material without flux while being brazed joints shall be continuously purged with oil free dry nitrogen to prevent the formation of copper oxide on the inside surface of the joints. All existing and proposed exposed pipe should be painted with two coat of synthetic enamel paint color codification as per IS 2379 of 1963 and approved medical standards. Make Maxflow/Janya/Metal Gem/Cuber or equivalent approved make of HQ CENC.

Supply, Installation, testing and commissioning of oxygen Gas outlet points complete with matching probe/adopter with one end suitable for Hose & other end suitable for terminal units complete set for Oxygen the outlet shall be modular singles and shall incorporate maneplate color coding, double lock outlet type manufactured with an approx 165mm length, copper inlet pipe stub which is silver brazed to the outlet body complet all as specified and as directed. Make Greggersen / Tedisel / Trumph / WTK or equivalent approved make of HQ CENC.

Supply, Installation, testing and commissioning of the Alarm Panel, which shall be Audio & Visual microprocessor controlled and designed to company complete all as specified and directed.

Supply, Installation, testing and commissioning of the Master Alarm Panel, which shall be audio & visual s microprocessor controlled and designed to company complete all as specified and directed.

Supply, Installation, testing and commissioning of Suction Machine (Make; Anand) Model No HI VACC PLUSS 60 LTR capacity complete all as specified and directed.

Supply, Installation, testing and commissioning of Suction Machine for MI Room (Make: Anand) Model MB 36 complete all as specified and directed. .

Supply, installation, commissioning and testing of Semi -Automatic Oxygen Panel with maximum input pressure 220 Bar, output pressure 4.2 Bar, FLOW CAPACITY 1000 LPM, minimum three input points (Main, Back up, External supply/emergency case supply units/LMO), operating temperatures +10 to +45 degree C, Digital LCD display, Alarm, sound and as per technical specifications, approved medical standards and consisting of following features as mentioned in terms and conditions complete all as specified and directed.

Supply, Installation, testing and commissioning of 12 mm OD MEDICAL LINE VALVE or ISOLATING VALVE or ball valves as per BS 1057, rated at 400 psig, as well as full vacuum (29.9" Hg). Valves go from full ON to full OFF by turning the vinyl-gripped valve handle 90-degree Locking-type handles may be ordered separately when required. Copper tubing is factory installed to help prevent valve seat damage during soldering. main and riser valves are not required to be installed in a box unless specially noted or required. Make Conex/RB/RN/SIM/Audco/Aktiv or equivalent approved make of HQ CENC.

Supply, Installation, testing and commissioning of 15 mm OD MEDICAL LINE VALVE or ISOLATING VALVE or ball valves as per BS 1057, rated at 400 psig, as well as full vacuum (29.9" Hg). Valves go from full ON to full OFF by turning the vinyl-gripped valve handle 90-degree Locking-type handles may be ordered separately when required. Copper tubing is factory installed to help prevent valve seat damage during soldering. main and riser valves are not required to be installed in a box unless specially noted or required. Make Conex/RB/RN/SIM/Audco/Aktiv or equivalent approved make of HQ CENC.

Raman Bio Medical Engineers

LINK MEDICAL PVT LTD

M/s SHIVA BUILDERS

M/S SACHKHAND ROAD SERVICE

arneesh kumar suri

M/S SATPAL AND BROTHERS

singh traders

M/S NARAYAN CONSTRUCTION