SPECIAL REPAIRS (B/R) TO BLDG NO. P-30 AT SDI UNDER GE

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.

Demolition of PCC of any description and in any position as in complete all as specified and directed.

M&L for 75 mm thick Cement concrete type B- 2,1:2:4 (40mm graded aggregate) as in subfloors etc complete all as specified and directed.

M&L for Coloured Joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick Screed bed or bedding layer for laying floor finishes in CM 1:6 etc complete

Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc including removal of debries outside MOD Land complete all as specified and directed.

S&F glazed ceramic coloured tiles 7mm thick 450 x 300mm size in verticle surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 etc complete

M & L for Mirror polished machine cut kota stone slab flooring 20-25mm thick over 20mm screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as directed.

M & L for mirror polished machine cut kota stone slab 20-25mm thick as in skirting including 10mm rendering as in backing coat in CM 1:4 all as specified & directed

M&L for Complete removal of existing treatment on old wall surfaces by mechanical process &Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth applying two coats of Oil bound distemper over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified and directed.

M&L for Complete removal of existing treatment on old wall surfaces by mechanical process &Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth surface of ceiling and applying three coats of white washing. complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device, flush pipe and plastic water closet seat, black closed pattern with flat bottom and cover and mild steel chromoium plated amluminim hinging device complete all as specified.

S&F Vitreous China wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device, flush pipe and plastic water closet seat, black closed pattern with flat bottom and cover and mild steel chromoium plated amluminim hinging device complete all as specified.

S&F in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connectin to flush pip or lever if any size and pattern with inlet ball valve float and handle fixed to pedestal pattern water closet pan including all joints , etc complete of approved makecomplete all as specified.

S&F PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connectin to flush pip or lever if any size and pattern with inlet ball valve float and handle fixed to pedestal pattern water closet pan including all joints , etc complete of approved makecomplete all as specified.

Supply and fix in repair vitreous China wash basin, white, flat back, size 630 x 450mm including waste fittings, brass, Cromium plated with long screwed shanks and fly-nuts, flanged end bedded in red lead cement and other end fixed and brackets including cutting for and pinning in ends of brackets or errecting stand etc. all as specified and directed.

Supply and fix vitreous China wash basin, white, flat back, size 630 x 450mm including waste fittings, brass, Cromium plated with long screwed shanks and fly-nuts, flanged end bedded in red lead cement and other end fixed and brackets including cutting for and pinning in ends of brackets or errecting stand etc. all as specified and directed.

S&F waste coupling of PTMT (half or full threaded) (minimum weight 32mm-45gms/40mm-60gms) complete all as specified and directed.

S&F 15mm bore Pillar taps, fancy type cast copper heads, capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F stop valves 15mm ,fancy type cast copper alloys, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron piipe or unions and fixed complete all as specified and directed.

S&F Grating doom 100mm dia of PTMT(Minimum weight 25gms) complete all as specified and directed.

S & F vitreous china urinal partition white of size 310 x 700 mm. complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm of approved qualitycomplete all as specified and directed.

S&F 15 mm dia bore fancy type chromium plated bib taps screwed for iron pipe, or for brass ferrule complete all as specified and as directed.

Supply and Fixing in repairs health faucets Chromium plated (hand shower) with 8mm dia 1.50m long flexible hose, wall hook fixed with brass screws and all accessories complete all as specified and directed.

Supply and Fixing health faucets Chromium plated (hand shower) with 8mm dia 1.50m long flexible hose, wall hook fixed with brass screws and all accessories complete all as specified and directed.

M&L toilet paper holder of vitrous china fixed to walls with chromium plated brass screws in repairs complete all as specified and as directed.

Taking up or down steel tubing and connections, 15mm bore complete all as specified and directed.

Taking up or down steel tubing and connections, 20mm bore complete all as specified and directed.

S&F CPVC 16mm Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified , complete all as directed by Engr-in-Charge.

S&F 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. complete all as directed by Engr-in-Charge.

S&F 110 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps as directed 6 Kg/Sq cm complete all as specified and as directed.

S&F 110 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipescomplete all as specified and as directed.

S&F Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F 75 mm bore of pipe PVC (SWR) pipes single socket in any length with rubber ring joint fixed to walls with MS clamps as directed 6 Kg/Sq cm complete all as specified and directed.

S&F 75 mm bore of pipe PVC (SWR) bends of any radius / shoe fixed to PVC pipes as directed complete all as specified and directed.

Taking down chowkhats with shutter of any description not exc 1.50 sqm each and removal from site complete all as specified and directed.

S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C’ channel having a PVC sheet strips of 20mm width stuck inside with solven cement for styles and plain colour PVC sheets for top rain lock rail and bottom rail on either side and as gap insert for top rail and bottom rails, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet bedding and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete

S & F butt hinges 100mm size extruded aluminium alloy with galvanised stainless steel hinge pin,anodised, complete all as specified and directed.

S & F aluminium handles 150 mm size cast type anodised complete all as specified and directed.

S & F Aluminium anodised bolts barrel tower bolts 150 mm long of extruded section complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar, complete all as specified and directed.

M&L for Pre-cast cement concrete laid in cement mortar (1:4) type B1 1:2:4 (20mm graded aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in mortar, complete all as specified and directed.

Rendering 15 mm thick on fair faces in CM 1:6 of brick work or concrete surfaces to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for preparation of new surface/undecorated surfaces of walls and applying two coats of Oil bound distemper over a coat of priming on plastered and other surfaces with alkali resistant priming paint complete all as specified.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) and boarding any thickness, including cover fillets and removal out side of MoD land/Air Force Unit area without paying any extra etc. complete all as specified and directed.

S&F false ceiling grid of size 600 x 600 mm system using hot dipped galvanized steel section with precoated capping, main tee of size 24x32 mm having 0.27mm thick at every 1200mm centre to centre, cross tee of size 24x27 mm having 0.25mm thick at 600mm centre to centre and wall angle of size 19x19 mm having 0.35 mm thick fixed to the periphery of the wall, and suspended at every 1200mm centre to centre in both directed using 2.00 mm thick GI wire and fixing 600 x 600 x 16 mm mineral fibre tegular edge ceiling tiles of RH90 complete all as specified and as directed.

Taking down chowkhats with shutter of any description exc 1.50 sqm and n exc 4.00 sqm each and removal from site all as specified and directed.

S&F Powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc (minimum thickness of powder coating 50 micron) and fixing/finished with past on gap of the surface in contact with stone masonary wall/brick wall complete all as specified and directed.

S&F Powder Coated aluminium door shutters (minimum thickness of powder coating 50 micron) aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. Note: Glass will be measured and paid seperately.

S & F Powder coated anodised alluminium window and ventilator shutters sliding type without sash bar, aluminium sections weighing 0.55 Kg/m including joining cleats glazing clips, rubber packing , anodised aluminium snap beading, screws etc. complete all as specified and as directed by Engr-in-Charge.

S&F in repairs Aluminium extruded section body, Door closer hydraulically regulated, deisignation No.3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.

S&F Aluminium extruded section body, Door closer hydraulically regulated, deisignation No.3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.

S&F Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required cluding cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all omplete as per architectural drawings and the directions of Engineer-in-Charge complete all as specified and directed.

S&F 5.5 mm thick tinted sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each panelfixed to alluminium frame works with neccessary rubbber bedding complete all as specified and directed.

S&F for 12mm thick both side choice laminated prelaminated particle board for insulation purpose, fixed to aluminium framework, complete all as directed by Engr-in-Charge.

S&F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and as directed.

S&F 5 mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. complete all as specified and as directed.

Removing building materials etc.to a distance 5 km or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified

Taking down carefully aluminum/ point wiring (light, fan, socket or power) complete, conduit and its accessories removing from site and making good disturbed surfaces of walls, floors etc., all as directed.

Taking down existing unserviceable light fittings sketch type/ box type/building security light fitings complete by unscrewing from boards/walls and making /buildings and making good disturbed surface to match with existing finish all as directed.

Taking down existing unserviceable MCB DB's SPN/TPN any type complete all as directed.

Taking down existing unserviceable MCB's SP/SPN/TP/TPN any type complete all as directed.

Taking down existing unserviceable sub main wiring including conduit complete, all as directed.

M & L point wiring with 1.5 sqmm nominal cross sectional area, single core, 1100 Volts FRLS grade, stranded, PVC insulated, unsheathed copper conductor cable drawn through PVC concealed conduit of suitable size, complete with all PVC conduit accessories/ fittings, brass screws, washers etc, including metal flux boxes ,metal frame,cover plate of suitable size and modular white plate with frame for mounting modular switches, sockets and regulators etc, including all cutting/chases etc in walls and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed by Engr -in -charge for One light point / one bell point controlled by one, one way switch.

All as per item No.66 above but, One fan point /Exhaust Pointcontrolled by one switch

All as per item No.66 above but, Oone ding dong bell controlled by on by one switch

All as per Item No.66 above but for One 3 pin, 05 /06 Amps socket outlet point on same board controlled by one , one way 05/06 Amps switch

All as per Item No.66 above but for One 3 pin, 05 /06 Amps socket outlet point on independent board controlled by one , one way 05/06 Amps switch

M & L point wiring with 2.5 sqmm nominal cross sectional area, single core, 1100 Volts grade, stranded, PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 25 mm dia or higher, medium grade complete with and including all PVC conduit accessories/fittings, brass screws, washers etc,including metal flux boxes of suitable size and modular white plate with frame for mounting modular switches, sockets and regulators etc, including all cutting/chases etc in walls and including continuous earth wire of size continuous earth wire of size 2.5 Sqmm nominal cross sectional area, single core, PVC insulated copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed by Engr -in -charge for one 15 /16 Amps socket outlet point on independent

M&L for Sub main wiring/power wiring complete with two runs of 4.0 Sqmm, PVC insulated, unsheathed FRLS cable, 1100 Volts grade, multistranded with copper conductor, drawn through and including suitable size of rigid non metallic PVC conduit pipe,concealed and accessories on surface wall/floors/ with one run of PVC insulated, 2.5.0Sqmm FRLS copper conductor for earth continuity all as specified and as directed. NOTE :- Two runs of main copper conductor, one run of copper conductor for earth continuity and one run of conduit shall be measured as one unit length.

M&L for sub main wiring, complete with 4 runs of 6 sqmm, PVC insulated, unsheathed FRLS cable,1100 volts grade,multi stranded with copper conductor, drawn through and including suitable size of PVC conduit pipe and accessories on surface/wall/ roof etc. with two runss of PVC insulated, 4 sqmm FRLS cable, copper conductor for earth continuity conductor all as specified and as directed.

Taking down Supply and fix Ceiling rose 3 terminal 5 Amps 230 volts PVC/Polycarbonate, insulated body.

Taking downS & F electronic fan regulator modular type, 2 module, 120W including complete all as specified and directed.

Taking down Supply and fix modular switch 6 Amps 1 way one module complete.

Taking down Supply and fix modular switch of 16 Amps single module complete

Taking down Supply and fix modular socket 6 Amps three pin socket two module complete.

Taking down Supply and Fix modular socket 16 Amps three pin socket four module complete.

Taking down Supply and fix MCB DB, SPN, 8 way with 200 Amps rated copper bus bar with mild steel sheet enclosure, double door type suitable for fixing MCBs including connecting etc., complete all as specified and as directed.

Taking down Supply and Fixing MCB SP 6 - 32 Amps complete all as required and directed.

Taking down Supply and Fixing MCB SPN 32Amps complete all as required and directed.

Taking down S&F LED light Fitting 1 x 20 W ,220 V, AC decorative box type with driver,holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed by EIC

Taking down S&F LED light Fitting mirror type with high output diffuser 2 feet ,10 W 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed by EIC

Dismantling the earth chamber, Excavating and removing the u/s earthing materials along with u/s earth electrodes from the existing u/s earth pits and M/L for providing earthing with GI earth plate electrode 600 x 600 x 6.3 mm thick burried directly in ground vertically to depth of not less than 2.25 mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to GI earth strip of 25x4mm by means of bolts, nuts, washers of GI and provision of earth lead, GI protection pipe with 15mm light grade galvanized including necessary earth work in any type of soil, PCC 1:3:6 type CI (using 20mm graded stone aggregate) earth chamber and 1:2:4 type B1 RCC cover 50mm thick with 6mm dia MS bars, 75 mm c/c, complete all as shown in SSR Pt - 1 electrical plate No 3. Note :Note :Unit rate Qoted is deemed to include the cost or excavation and earth work, RFR, Removal in any type of soil, PCC Chamber, funnel cover etc complete.

Disconection & removing the corroded GI Strip 25 x 4 mm and M & L Earth continuity conductor or main earthing lead, galvanised iron strip 25 x 4 mm fixed to wall on batten or recess or chases or buried in ground or draw in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etccomplete, as required.

S&F Celing Fan complete with blades , down rods ,elcetrinic regulator and acessories , 230 volts, 1200 mm sweep , min air delevery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed

Supply and fix bell push AC. 230 volts,single pole.

Supply & fixing bell push modular type 6 Amps complete all as specified & directed.

Taking down ceiling fan/Exhaust fan, sealing the cable ends dismantling the fan blade kept in safe costody complete all as specified.

Hanging only ceiling fan/exhaust fan and connecting up including provision of cable from ceiling rose or connector to fan all as specified ,and any addn/alteration /threading if required to down rod shall be done by contractor with out any extra cost.

Taking down S & F MCB DB SPN 12Way with 200 Amps rated busbar, Double door, flush to wall including all cutting etc on wall and making good the disturbed surfaces to match the existing complete all as specified and directed.

Taking down S & F MDB TPN 4Way, Double Door flush to wall including all cutting etc on wall including making good the disturbed surfaces to match the existing in replacement of old U/s complete all as specified and directed.

Taking down Supply and fixing in repairs 36W LED Fitting, 2 x 2 recess / Surface LED flat panel with high brightness LED for glare free homogenous illumination including LED driver complete all as specified including taking down old unserviceable fittings. Make : Bajaj /CG/Philips/Havells

Supply and install hi wall split units air conditioner indoor/outdoor of capacity 2.0 TR complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 4 star rating and EER 3.2 complete all as specified and directed.

S&F Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA

S&F single pole and neutrla enclosure with two pin and earth plug and socket including 1Nos double pole MCB 20 Amps capacity complete all as specified and directed by Engr-in-charge