COMPREHENSIVE REPAIR AND MAINTENANCE AT BAGJOLA MIL STATION UNDER GE (NORTH) KOLKATA

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and directed.

All as per item no 2 above but in skirting/ dado over 10mm thick bedding layer of mortar in CM 1:4 complete all as specified and directed.

Material and labour for Light shade Vitrified tiles 10mm thick (square/rectangular) polished, area of each tiles exc. 0.18 sqm but n.exc. 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 20mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

All as per item no 4 above but in skirting/ dado over 10mm thick bedding layer of mortar in CM 1:4 complete all as specified and directed.

Material and labour for glazed ceramic colour tiles 350x250x7mm/ 450x350x7mm thick in skirting/dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed.

Dismantling of Stone slabs and tiles, laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc.complete all as specified and as directed.

Material and labour for Machine cut cudappah stone slab 20-25mm thick over cement screed base 20 mm thick in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Material and labour for machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade, with grey cement and pigments and laid over sand cushioning of thickness as required complete all as specified and as direded.

Material and labour for 50mm thick Sand filling under floors or in foundations including watering and consolidation complete all as specified and as direded.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, over 20 mm thick screed bed or bedding layer of mortar in CM (1:6) for laying floor finishes, set, jointed with grey cement and pigment and pointed in neat cement slurry in floors complete all as specified and directed.

Material and labour machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and reqired to give high gloss finish including 20mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.

All as per item no 12 above but in skirting/ dado over 10mm thick bedding layer of mortar in CM 1:4 complete all as specified and directed.

Dismantling wall and ceiling board ( fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets etc. complete all as specified and directed.

Supply and fix Anodised aluminium snap grid frame work size of grid 605mmx605mm for false ceiling including GI hangers 6mm dia GI wire (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long and as per manufacturers instruction complete all as specified and directed.

Supply and fix of 6mm thick high pressure steam cured non asbestos fibre cement designer ceiling board of size to suit grid mould (605 x 605mm as specified above) and fix in grid mould with necessary fixing arrangement as per manufacturer’s instruction complete all as specified and directed.

Removing of plants & shrubs, girth not less than 3.0 cm including roots by dismantling of brick work, PCC/RCC work including necessary scaffolding any type in any location/position i.e. roof, parapet wall, near pipes etc after removal of roots trees, scrubs etc from any location of wall and making good the disturbed portion using PCC (1:2:4) type B-0 and 10mm thick plaster in CM (1:3) including applying acid after removing roofs for preventing the regrowth complete all as specified and directed.

Dismantling of existing roof treatment (any thickness) including layer of bitumen felt, concrete padding and benching including hacking for key, scrubbing down with water complete to receive new roof treatment including removing rubbish off the premises to a distance exc 0.5 km but n exc 1.5 km complete all as specified and directed.

M&L for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand 1:1 (by weight) complete all as specified and directed.

M&L for cement concrete 50mm thick,1:2:4 type B-0(using 12.50 mm graded stone aggregate) for padding etc complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:3 finished the surface even & smooth without using extra cement but using liquid water proofing compound as per manufacturer's instructions complete all as specified and directed.(Note- Water proofing compound shall be measured & paid separately)

M&L for water based liquid elastomeric water proofing membrane for roof treatment consisting of light fast non-lead / chrome pigments with acrylic co-polymer binder having volatile organic compound 15-45gms / ltr with minimum density of 1.26 + 0.02 gm/cubic cm and minimum dry thickness of 600-800 microns including surface preparation complete all as per manufacturers specification and as directed. (Make : Aquatech exterior roof waterproof of IWL/STP/Dulux or equivalent as in the list of make)

M&L for cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as in benching on chajja, parapet wall and sides of wall etc. complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in valley gutter etc, fixed with self tapping screws complete all as specified and directed.

S & F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F rolled mild steel in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and directed.

Material and labour for PCC (1:3:6) type C1 (using 20mm graded stone aggregate) for fixing of hold fasts block and similar work including necessary form work complete all as specified & directed.

Demolition of cement concrete in ground floors and pavings n.exc. 15 cm thickness below or above ground level complete all as specified and as directed.

Material and labour for providing 100mm thick cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and as directed.

Materials and labour for 75mm thick PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) as in pavement/ plinth protection , laid in bays and joints shall be filled up with bituminous gola with 80/25 bitumen ( 1 part of bitumen to be mixed with 3 part of sand and finished the surface fair and even complete all as specified & directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.

Material and labour for brick work with bricks class designation 75, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Material and labour for Providing, cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

Taking down cement plaster of any description on brick walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

Material and labour for 20mm thick plaster in CM (1:4) in two layers, i.e 10mm thick in each layer, top layer mixed with integral water proofing liquid admixture as per manufacturers instruction on brick or concrete surfaces of wall finished the surface fair and even complete all as specified and as directed. Note :- WPC shall be measured and paid separately.

Supply only integral water proofing liquid admixture for concrete and mortar (Make :CONPLAST X421IC of Fosroc /SIKA No 1 of SIKA/equivalent brand of PIDILITE)

Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for applying 1.50mm thick wall care putty and applying two coats of oil bound distemper over a coat of alkali resistant primer to new plastered surface of wall complete all as specified and as directed.

Material and labour for preparation of new plastered surface of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed.

Dismantling wrought iron or mild steel work for any description not otherwise provided for complete all as specified and directed.

M&L for complete removal of existing treatment of old decorated plastered surfaces of wall etc including washing, rubbing down and stopping of old treatment and applying two coats of oil emulsion distemper on wall surface complete all as specified and directed.

Material and labour for complete removal of existing treatment of old plastered surfaces of wall including washing, rubbing down and stopping of old treatement and applying two coats of cement base paint over a coat of cement primer complete all as specified & directed.

M&L for preparation of old steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint (1st grade quality) complete all as specified and as directed.

M&L for preparation of old wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint (1st grade quality) complete all as specified and as directed.

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 sqm each complete all as specified and as directed.

Taking down chowkahts or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and as directed.

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and as directed.

Taking down chowkats or frames exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and as directed.

Taking down and refixing shutters of any description exc 1 sqm each n exc 2 sqm each in the same opening after necessary repair work complete all as specified and as directed.

S & F pressed steel frames, size 105 x 60mm, for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified and directed.

Supply and fix 2nd class hard wood, plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed.

Supply and fix 35mm thick 2nd class Hard wood factory made glazed and skeleton door shutters, open rebated and prepared to received glass/gauge etc (without sash bars) edges of framing plain, chamfered or rounded and mitred , beads for securing glass etc the size of member of shutter as specified in SSR Part-I, clause 8.24 (a) complete all as specified and as directed.

Supply and fix 35mm thick flush shutters solid core construction with particle board core and plywood face panels, one face covered with decorative face veneer with lipping / frame to match complete all as specified and as directed.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube with EPDM gasket as per specification and drawing complete all as specified and as directed.

Supply and fix factory made solid PVC moulded door shutter 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on back face, with particle board core, supplying and fixing in frame at site as per specification and drawing complete all as specified and directed.

Supply and fix solid PVC door frame of size 50mm x 95mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet with M.S. Square tube with EPDM gasket as per specification and drawing complete all as specified and as directed.

S&F for factory made solid panel Prelam PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both face prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S & F Solid PVC Wall Lining consisting of 5mm thick coloured PVC sheet inclusive of solvent cement and preparing existing surface and fixing at site on as cupboard etc complete all as specified and as directed.

S & F 18mm thick Solid PVC Sandwich Panel with 1mm Plain PVC Sheet on both sides suitably fixed in M.S. angle frame work as per specification & drawing complete all as specified and as directed.

S & F 12mm thick Solid PVC Sandwich Panel with 1mm Plain PVC Sheet on both sides suitably fixed in M.S. angle frame work as per specification & drawing complete all as specified and as directed.

Supply and fix 125mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix 150mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix 200mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix 125mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.

Supply and fix 150mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.

Supply and fix 100 mm size butt hinges, medium weight, stainless steel, and fixed complete all as specified and as directed.

Supply and fix 75 mm size butt hinges, medium weight, stainless steel, and fixed complete all as specified and as directed.

Supply and fix 150 mm size designer handle, oval type, medium weight, stainless steel, and fixed complete all as specified and as directed.

Supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

Supply and fix 100 mm size designer handle, oval type, medium weight, stainless steel, and fixed complete all as specified and as directed.

S&F Hasp and staple,100mm size, safety type stainless steel with steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Taking down existing aluminium door and carrying out all necessary repair work including tightening, adjusting and replacement of hinges, screws, aluminium tower bolt and refixing in the same opening complete all as specified and directed.

M & L for Double action floor spring, hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F in repairs for door closer, aluminium (extruted section body), hydraulically regulated, designation No, 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Hacking out old broken glass any thickness size and quality from wooden/steel frames etc complete all as specified and directed.

S & F 3.0mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane etc (for old broken glasses) complete all as specified and directed.

S & F 3.0mm thick figured glass pin headed type and glazing with oil putty in squares n exc 0.5sqm in each pane complete all as specified and directed.

S & F 150mm overall length of cover plate of floor door stopper of aiuminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

Material and labour for two coats of synthetic enamel paint over a coat of pink primer to new wooden surfaces of any description over 10cm width or girth including preparation of new surfaces complete all as specified and as directed.

Supply and fix stainless steel wire cloth of 0.36 mm nominal dia of wire and averaging of width of aperture 1.40mm, fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fix Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and as directed.

S&F steel window with side hung shutters including projecting or box stype hinges with steel handle peg stay and divided into square with glazing bars dovetailed or welded, to receive glazing, or gauzing including one coat of primer etc complete all as specified and as directed.

S&F framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to new steel surface including preparation of surfaces exceeding 10cm with or girth complete all as specified and as directed.

Material and labour for two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to new steel surface including preparation of surfaces not exceeding 10cm with or girth complete all as specified and as directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed.

S&F 18/19 mm thickness prelaminated particle board, interior grade prelaminated one side decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and as directed.

M&L for 6mm plywood, grade BWR type BB, fixed with screws to timber frame in wall complete all as specified and as directed.

S & F 12 mm perforated particle board/tiles for insulation and accoustic purpose ,600x600mm in size, fixed with nails to timber frame work or with staples on snap grid in wall etc complete all as specified and as directed.

M&L for 6mm plywood grade BWR type BB,fixed with screws to timber frame in ceiling complete all as specified and as directed.

S & F in repair for 12mm perforated particle board/tiles for insulation and accoustic purpose ,600x600mm in size, fixed with nails to timber frame work or with staples on snap grid etc in ceiling complete all as specified and as directed.

Demolition of reinforced cement concrete of roofs, floors , staircases, landing, chajjas and similar suspended works in ground floors beams(reinforcement cut as required to facilitate demolition) complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) 1:1.5:3 type A1 (using 20mm graded stone aggregate) as in chajja complete all as specified and directed.

Material and labour for precast reinforced cement concrete (1:1½: 3) type A1 (using 20mm graded stone aggregate) for cover slab set in cement mortar (1:4) as in manhole cover/ drain cover complete all as specified and as directed.

M&L for use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges and finished the surface rough complete all as specified and directed.

Material and labour for PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in benching for manhole etc complete all as specified and as directed.

Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for Plates (plain or chequered) channels, square cut or notched(ordinary and counter sunk forming holes, without any attachment (Fe 410-w-Gde -E-250 quality A) with adhessive for fixing of chequered or plain plates on PCC floor complete all as specified and as directed.

Taking up or down 15mm dia steel tubing and connections, segregating serviceable pipe for reuse complete all as specified and directed.

Refixing of serviceable GI pipe 15mm bore obtained from item No.101 above after cleaning complete all as specified and directed.

Supply and fix 15mm bore medium grade galvanized steel tubes with all fittings and fixed to wall or in floors etc complete all as specified and as directed.

Taking up or down 20mm dia steel tubing and connections, segregating serviceable pipe for reuse complete all as specified and directed.

Refixing of serviceable GI pipe 20mm bore obtained from item No.104 above after cleaning complete all as specified and directed.

Supply and fix 20mm bore medium grade galvanized steel tubes with all fittings and fixed to wall or in floors etc complete all as specified and as directed.

Supply and fix in repair bib taps of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and fix in repair angular stop cock of 15mm bore fancy type, chromium plated cast copper alloy, screwed down, high pressure, with crutch handle, screwed both ends for brass ferrule complete all as specified and as directed.

Supply and fix in reapir vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 'P'or 'S' trap (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and as directed.

S & F in repair toilet paper holder of brass chromium plated fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.

Supply and fix in reapir vitreous china wash down water closet pan pedestal pattern (Anglo Indian type) , white including 'P' or 'S' trap (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete all as specified and as directed.

S&F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

Supply and fix in repair 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern including PVC connections 15mm size with PTMT nuts and washer both side of length 450mm complete all as specified and as directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) pipe 110mm bore, type A, single socketed, in any length with rubber ring joints laid in trenches or in floor with complete all as specified and as directed.

Supply and fix in repairs PVC (SWR) pipe 110mm bore, type A, single socketed, in any length with rubber ring joints fixed to walls with and including PVC clip complete all as specified and as directed.

Supply and fix PVC (SWR) bend 110mm dia any radius complete all as specified and as directed.

Supply and fix PVC (SWR) branch piece 110mm dia single socketed( single Y) equal or un equal complete all as specified and as directed.

Supply and fix PVC shoe 75mm dia complete all as specified and as directed.

S&F in repair vitreous China Urinal, Half stall type, white type complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and as directed.

Supply and fix in repair pillar tap of 15mm bore, cast copper alloy with capstan heads fancy type, chromium plated screwed down, high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fix in repairs vitreous china wash basin white flat back, size 630 x 400 mm including PTMT waste coupling 32mm dia (min wt 45 gm), chain and plug and porcelain stopper etc. complete all as specified and as directed.

Supply and fix in repairs Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and as directed.

Supply and fix in repair brass chromium plated tubular towel rail , 20 mm dia, D type, 600mm long between flange fixed with chromium plated brass screws complete all as specified & directed.

Supply and fix in repair 40mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified & directed.

Supply and fix in repair 40mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified & directed.

S&F in repair PVC waste pipe, 32/40mm dia fixed in position complete all as specified and dirceted.

Supply and fix in repair 100mm cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and as directed.

Supply and fix in repair 75mm cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and as directed.

S&F in repair PVC (SWR) gully trap 125/110mm, setting jointing with solvent cement complete all as specified and as directed.

S&F in repair PVC connection 15 mm dia, 450 mm long, with PTMT nuts complete all as specified and as directed.

Dismantling water tanks n. exc 500 ltrs of any description and removing from site of work complete all as specified and as directed.

S & F Rotational moulded polyethylene water storage tanks, multi-layered (cylinderical vertical with closed top) 500 Ltr Capacity, hoisted and fixed in position including 20mm ball brass valve complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position and Cleaning & removing all scale and dirt, etc, from tanks and from mouths of circulating pipes,etc.(Exc 250 ltr n exc 500 ltr) complete all as specified and directed.

S&F in repair 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Supply and fix health faucet (ABS body) with 8mm dia 1 meter long flexible tube and wall hook for fixing in 15 mm dia pipe complete all as specified and as directed. Make: Jaquar or equivalent.

S&F in repair chromium plated Gratings size 75/100 mm with waste hole complete all as specified & directed.

S&F in repair chromium plated Gratings size 100/125 mm complete all as specified & directed.

S&F in repairs Grating doom 100mm dia of PTMT. (minimum weight 25 gms) complete all as specified & directed.

Excavation in trenches, n.exc 1.5 m wide or n exc 10 sq m on plan and n exc 1.5 m in depth for foundation for manhole etc taking out pipe line, laying of cable ,etc and getting out in soft / loose soil complete all as specified and directed.

M&L for concrete bed to drain pipe including packing under haunching against the sides of pipe after they are laid and tested for 150mm bore pipe using cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) complete all as specified and directed.

M&L for concrete bed to drain pipe including packing under hunching against the sides of pipe after they are laid and tested for 100mm bore pipe using cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) complete all as specified and directed.

M&L for 150mm dia (internal dia) salt glazed stone ware drain pipes grade"A" laid in trenches jointed and tested complete all as specified and directed.

M&L for 100mm dia (internal dia) salt glazed stone ware drain pipes grade"A" laid in trenches jointed and tested complete all as specified and directed.

Returning, filling in including spreading levelling, watering and well ramming in layers n.exc 25 cm of soil complete all as specified & directed.

Removing surplus soil to a distance exc. 1.50 km but n exc. 5 km and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified & directed.

M&L for cleaning and removing of sludge, soil, mud etc from sewage pipe lines upto 600mm bore, by pumping method including manholes by rodding using MS rod tied with jute/gunny bags between manholes to manholes and flushing down with water complete all as specified and directed by Engineer-in-Charge. (Note : sludge / night soil may taken out by mechenical means and remove out side of defence land )

Taking out manhole cover slab, cleaning of manholes depth upto 1.5 mtr by removing all silt, mud, sludge, any other materials, flushing with water to ensure clean, resetting the manhole cover in same position after cleaning and testing, removal of spoils/sludge out side MD land complete all as specified and directed. Note : Cleaning of manhole under this item shall be paid only those manholes which are not connected with sewage line cleaned against item No 149.

M&L for taking out sludge from Septic tank of any size and depth complete all as specified and directed by Engineer-in-Charge. (Note : sludge / night soil may taken out by mechenical means and remove out side of defence land )

Cleaning of drain having inner width upto 0.6m and depth upto 1.2 metre by removing mud, garbage, debries, sludge, vegitation etc having average depth 0.45 m by manually or by machnically, rubbish off the premises beyond MOD land complete all as specified and directed.

Demolition of cement concrete (reinforced) in ground floors and pavings nexc 15 cm thick (below or above ground level) complete all as specified and directed.

Material and labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending lapping etc as required and welding with existing bar complete all as specified and as directed.

M & L for providing precast cement concrete 1:1.5:3 type A-1 using 20 mm stone aggregate as in manhole cover slabs and similar work round, square or rectangular in shape and set in CM 1:4 complete all as specified and directed. (Note : All RCC manhole covers shall be embossed with Month & year of casting)

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including rubbish off the premises complete all as specified and directed.

M&L for salt glazed stone ware gully trap, square or round mouthed, 150 x 150 mm size, shape as required, including taking out of old gully trap and jointing with old connections and pipes complete all as specified and directed.

M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in coping/bed block including weathering slightly rounded or chamfered angles and throating as directed including necessary form work if required complete all as specified and directed.

Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, Bell push, call bell, ceiling rose, sockets, switch sockets, regulator, lamp holder etc by unscrewing from board carefully and keep aside serviceable materials for reuse including making good of the disturbed surfaces, all as specified and directed.

Taking down only old u/s items such as switches, Bell push, call bell, ceiling rose, sockets, switch sockets, regulator, lamp holder etc by unscrewing from board carefully including making good of the disturbed surfaces, all as specified and directed.

Material and labour for point wiring (surface type) with PVC insulated 1100 volts grade FRLS unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC casing-N- caping (medium duty) double lock type,size of casing caping as required at site but not less than 20mm with fittings and accessories pressed steel sunken terminal box in concealed made out of 1.6 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 1.8 mm thick bakelite sheet cover for fixing switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for one light point controled by one, one way 6 Amp switch complete all as specified and as directed.

All as per Item No. 161 above but for one fan point controlled by one, one way 6 Amp switch complete all as specified and directed.

All as per Item No. 161 above but for one 5 pin socket outlet 06 Amp on independent board complete all as specified and directed.

All as per Item No. 161 above but for one 5 pin socket outlet 06 Amp on same board complete all as specified and directed.

All as per Item No. 161 above but for One bell/buzzer point controlled by one push button same board with other switch or independent complete all as specified and directed.

All as per Item No. 161 above but for One light point controlled by two 2 way switch complete all as specified and as directed.

All as per Item No. 161 above but for one 15 Amps socket outlet by using 2.5 sq mm, copper conductor with 2.5 sq mm, PVC insulated single core cable for earth continuity conductor complete all as specified and directed.

M & L for concealed point wiring complete with 1.5 sq mm FRLS, PVC insulated multi standard copper conductor single core cable 1100 volts grade,drawn into non metalic PVC rigid conduit medium grade of size not less than 20mm bore and conduit accessories fixed on wall roof etc, and including provn of PVC insulated 1.5 sq mm copper conductor cable for each continuity and connected to common earth dolly and pressed steel terminal boxes made out of 1.6 mm thick MS sheet concealed in wall and laminated sheet cover of 1.8 mm thick on top for housing the switches socket,outlet etc. for one light point controled by one, one way 6 Amp switch complete all as specified and directed by Engineer-in-Charge. Note :- PVC conduit , making good disturbed wall surfaces including finishing with cement mortar (1:4) matching with existing shade of the painted surface are deemed to be included in the quoted rate.

All as per Item No. 168 above but for one fan point controlled by one, one way 6 Amp switch complete all as specified and directed.

All as per Item No. 168 above but for one 5 pin socket outlet 06 Amp on independent board complete all as specified and directed.

All as per Item No. 168 above but for One 5 pin socket outlet 06 Amp on same board complete all as specified and directed.

All as per Item No. 168 above but for One bell/buzzer point controlled by one push button same board with other switch or independent complete all as specified and directed.

All as per Item No. 168 above but for One light point controlled by two 2 way switch complete all as specified and directed.

All as per Item No. 168 above but for one 15 Amps socket outlet but using 2.5 sq mm,copper conductor with 1.5 sq mm,PVC insulated single core cable for earth continuity conductor complete all as specified and directed.

M&L for cutting chases, pinning in making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landing, steps, cils, sunshades sheleves, lintels, etc and cutting chases for concealed water tubing or concealed conduict wiring etc and making good cutting not exc 10 cm grith complete all as specified and directed.

Supply and fix switch piano flush button 6 Amp single pole, one way complete all as specified and as directed.

Supply and fix socket outlet 5 Pin, 6 Amps flush type complete all as specified and directed.

Supply and fix switch socket combination 5 Pin, 6 Amp flush type complete all as specified and directed.

Supply and fix switch socket combination 5 Pin ,16 Amp flush type with complete all as specified and directed.

Supply and fixing switch flush type, 6 Amps, single pole, two way complete all as specified and directed.

Supply and fix lamp holder insulated body with back plate for angle/batten fittings complete all as specified and as directed.

Supply and fix ceiling rose surface bakelite, 65 x 50mm, three terminals complete all as specified and directed.

Supply and fix bell push, flush type 6 Amps complete all as specified and directed.

Supply and fix electronic fan regulator stepped type flush type AC 240 volt complete all as specified and directed.

Supply and fix in repair call bell Ding Dong, AC, 230V single pole complete all as specified and directed.

Material and labour for sub-main wiring (surface type) with two run of PVC insulated,unsheathed,FRLS single core,multistranded copper conductor of size 4.0 Sq mm and one run of 4 Sqmm copper conductor as continuity earth wire,drawn through and including PVC casing caping including taking down old unsv sub main wiring with casing caping all as specified and as directed. (Note:- Two run of 4.0sqmm and one run of 4 sqmm copper conductor ( for Phase,Neutral and Earth) + One run PVC conduit shall measured as one unit).

Material and labour for sub-main wiring (surface type) with two run of PVC insulated, unsheathed, FRLS single core, multistranded copper conductors of size 6.0 Sq mm and one run of 6.0 Sqmm copper conductor as continuity earth wire,drawn through and including PVC casing caping including taking down old unsv sub main wiring with casing caping all as specified and as directed. (Note:- Two run of 6.0sqmm and one run of 6.0 sqmm copper conductor ( for Phase,Neutral and Earth) + One run PVC conduit shall measured as one unit). .

Material and labour for sub-main wiring (Concealed type) with two run of PVC insulated,unsheathed,FRLS single core,multistranded copper conductors of size 4.0 Sq mm and one run of 4 Sqmm copper conductor as continuity earth wire, drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including taking down old unsv sub main wiring with conduit complete all as specified and as directed. Note:- (i):Two run of 4.0sqmm and one run of 4 sqmm copper conductor ( for Phase,Neutral and Earth)+One run PVC conduit shall measured as one unit).

Material and labour for sub-main wiring (Concealed type) with two run of PVC insulated,unsheathed,FRLS single core,multistranded copper conductors of size 6.0 Sq mm and one run of 6 Sqmm copper conductor as continuity earth wire, drawn through and including PVC conduit (medium grade) of adequate size with fittings and accessories as required at site including taking down old unsv sub main wiring with conduit complete all as specified and as directed. Note:- (i):Two run of 6.0sqmm and one run of 6.0 sqmm copper conductor ( for Phase,Neutral and Earth)+One run PVC conduit shall measured as one unit).

Supply and fix in repair powder coated sheet metal enclosure (in concealed) single pole & neutral for DBs (Double door) 4 way, 240 V with rated busbar DIN channel, neutral link & earth link superline complete all as specified and directed. Note:- (Chase cutting & make good disturb surface is included in unit rate) Make- Cat No 507610 of Legrand or equivalent in Havells/L&T/Siemens

All as per item No 190 above but for 8 way SPN DB complete all as specified and directed. Make- Cat No. 507611 of Legrand or equivalent Model of Makes specified in PS here-in-after.

All as per item No 190 above but for 12 way SPN DB complete all as specified and directed. Make- Cat No. 507612 of Legrand or equivalent Model of Makes specified in PS here-in-after.

Supply and fix in repair vertical TPN DB with MCCB incomer of 4 way in double door suitable for four pole MCCB (63A/100 A)as incomer including MCCB+12 modules incoming and outgoing make good of damaged surface/wall including re-connection with existing earth wire to DB complete all as specified and directed. Note:- MCCB shall be measured and paid separately. Make- Cat No 507745 of Legrand or equivalent Model of Makes specified in PS here-in-after.

Supply and fix in repair MCCB triple pole & neutral 40-100 amps,,16 KA, with all incoming / outgoing connections suitable for fix 4 way vertical type TPN DB in double door twith proper size of aluminium lugs complete all as specified and directed. Make- Cat No. 420015 of Legrand or equivalent Model of Makes specified in PS here-in-after.

Supply and fix in repair MCB single pole & neutral / Double Pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified and directed. Make- Cat No. 406809 to 406817 of Legrand or equivalent Model of Makes specified in PS here-in-after.

Supply and fix in repair MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified and directed. Make- Cat No. 408587 to 408595 of Legrand or equivalent Model of Makes specified in PS here-in-after.

Material and labour for earthing with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in ground ( earth pit not less than 2.25 mtrs deep below GL) with top edge of the plate not less than 1.5 mtrs below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (Light grade) and 20mm dia GI pipe (medium grade) with Funnel for watering and connected to control switch as directed including necessary earthwork as in soft/loose soil, concrete pit in PCC (1:3:6) type C1, pre cast RCC (1:1.5:3) type A1 cover slab duly reinforced with 8mm dia TMT bar @ 150mm C/C both way and two Nos lifting handle made of 8mm dia TMT bar and set in cement mortar (1:4), funnel, wire mesh, char coal or coke and salt in alternate layer, testing, etc complete and as specified in electrical plate No 3 of SSR Pt I including taking down old unsv earthing complete all as specified and directed.

Supply and fix in repair GI wire 4.0 mm as earth continuity conductor complete all as specified and directed.

Supply and fix in repair GI pipe 15 mm bore (dia), light-grade for protection of earth electrode complete all as specified and directed.

Supplying & fixing LED tube light fitting, 1 x 18 watt bipin holders, connector block etc. complete with aand connecting the same to ceiling rose with using copper conductor 23/0.0076 flexible twisted twin core cable ,and fixing the light fitting to walls / roof complete all as specified & directed

Supply and fix LED light fitting mirror type high output diffuser 2 ft ,10 watt, 220 volt AC decorative type with driver holder and led lamp including connecting up with three core flexible copper conductor cable of sutiable size complete all as specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm 40 watt, 220 V AC recessed /surface type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fix in repair LED light fitting, 1x10/1x9w bulk head luminaries, with LED lamp, etc. complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix in repair LED lamp (B22 Base type) of 1x7 W after taking down the old unserviceable CFL/GLS lamp complete all as specified and directed.

Supply & Fix in repair surface type, modular type power unit 25 amps complete with 4 module plate, starter plug and socket complete all as specified and directed.

Taking down Geysers of any make/ model / type / capacity after disconnecting all electrical and water supply line for repair/ replacement of parts and components, making the geyser in fully working condition, refixing in old position after repair/replacement complete all as specified and directed. Note :- (i) Spares used in replacements will be measured and paid seperately as supply only). (ii) The labour element involved in replacing the spare is deemed to be included in the unit rate quoted. (ii) The unit rate shall also be deemed to include for minor spares required for the functional utility of the appliance.

Supply only Apparatus assembly plate ( 8/9 hole) for Geyser of 25 Ltrs / 50 Ltrs capacity (as per existing sample) complete all as specified and directed.

Supply only Thermostat straight stem type complete all as specified and directed.

Supply only Heating Element 1500 watt suitable for Geyser of 25/50 Ltrs capacity Triangular/Round type complete all as specified and directed.

Supply only Indicating (Red/Green) lamp LED type (square/Round) button type for Geyser of 25/50 Ltrs capacity complete all as specified and directed.

Supply only PVC flexible cold water inlet pipe 15 mm dia 600 mm long complete all as specified and directed.

All as per item No. 211 above but for Hot water pipe ( Inlet wiremess type) complete all as specified and directed.

Supply only cast copper alloy, CP, stop cock, ISI marked, 15mm bore complete all as specified and as directed.

Supply only round type 3 core incoming copper cable of size 2.5 sqmm for 25/50 Ltrs capacity Geyser complete all as specified and as directed.

Taking down carefully Ceiling Fans of any Make, Model and capacity from their existing places for replacement of bush, bearing, Capacitor, servicing i. e. lubricating / Greasing and for rewinding/ painting by dismantling the same and keep the blades, canopy, splitpin and other parts and components in safe custody and hanging / fitting on it's previous position after repair/rewinding/painting/replacement of spares etc complete all as specified and directed. Note:- i) The unit rate quoted is deemed to include for the labour element involved in replacing the spares as mentioned herein below. (ii) The spares replaced shall be measured and paid as supply only items herein below. (iii) The spares shall suit the exisiting makes of fans or as per existing make of spares, as approved by the GE. (iv) Rewinding and painting shall be measured and paid separately. Existing makes :- Bajaj, Khaitan, Usha, Himadri

All as per item No. 215 above but for Exhaust Fans complete all as specified and directed.

All as per item No. 215 above but for Air Circulators wall mounted Fan complete all as specified and directed.

All as per item No. 215 above but for floor mounted pedestal fan complete all as specified and directed.

Supply only GM Bush for ceiling fan 1200/1400 mm sweep/ Exhaust Fan 230/300/350/450 mm sweep/or any type fan complete all as specified and directed.

Supply only Ball bearing (Cat No. 6201) for ceiling Fan/Exhaust Fan / or any type fan complete all as specified and directed.

All as per item No. 220 above but of Cat No. 6202 complete all as specified and directed.

All as per item No. 220 above but of Cat No. 6203 complete all as specified and directed.

Supply only capacitor 2.5 mfd, 220 volts complete all as specified and directed. Make:Tipcon / Universal / Sarda / Usha. / C&S).

All as per item No. 223 above but 3.0/4.0 mfd complete all as specified and directed.

Supply and fix in repair louver shutter for 300 mm sweep exhaust fan, of existing make, made of MS sheet folded type complete all as specified and directed.

All as per item No 225 above but for 450 mm sweep exhaust fan complete all as specified and directed.

Material and labour for painting by spraying with synthetic enamel paint to Ceiling Fans / Exhaust Fans/ Air Circulators wall mounted Fans/Floor mounted pedestal Fans including Blades/Down rods/ Canopy/Stand, Casing/ Cage and all accessories after preparation of surfce including thoroughly rubbing /cleaning old rusted spot complete all as specified and directed. Make of paint:- Asian / Berger / Jenson & Nicholson / Shalimar.

Material and labour for Rewinding of ceiling fans armature of 1200 mm /1400 mm sweep of any make & Model with replacing the burnt out winding by new super enameled high grade copper wire of existing gauge and number of turns and all insulating materials including heat vernishing and testing complete all as specified and directed.

All as per item No. 228 above but for exhaust fan 230mm/ 300mm sweep, single phase, 230 volts complete all as specified and directed.

All as per item No. 228 above but for exhaust fan 450 mm sweep, three phase, 230 volts complete all as specified and directed.

Supply and fix in repair fan blades for exhaust fan of 300 mm sweep as per existing make and type complete all as specified and directed.

All as per item No. 231 above but for exhaust fan of 450 mm sweep complete all as specified and directed.

Material and labour for lathe work for worn out spindle of ceilling fan / Exhaust Fan/ Air Circulators/ Wall mounting Fan of any sweep, Make & Model with replacing the worn out spindle by new one of existing size and materials including testing for free motion of fans complete all as specified and directed.

S&F in repair incoming twin core copper flexible wire ( not more than 45cm) of size 14/0.0076 from ceiling rose to ceiling fan / exhaust fans complete all as specified and directed.

Supply and fix in repair 3 pin plug top 6 Amps for air circulator wall mounted fan/ floor mounted pedestal fans complete all as specified and directed.

Supply and fix in repair 5 pin plug top 16 Amps for air circulator wall mounted fan/ floor mounted pedestal fans complete all as specified and directed.

Supply and fix in repair 2.5 mfd fan capacitor, 220V complete all as specified and directed.

Supply and fix mild steel rod including fabrication of hook ,size as required at site for hanging the ceiling fan including taking down old unserviceable rod complete all as specified and directed.

Material and labour for sand cushioning with clean dry sand in trenches for cable protection complete all as specified and directed. Note:- Punned depth shall be measured and paid.

Material and labour for brick protection using old size sub class ‘B’ new bricks, laid flat dry but jointed, laid length wise perpendicular to the axis of cable complete all as specified and directed.

Supplying, laying, connecting, testing and commissioning of XLPE insulated and PVC sheathed ,armoured heavy duty UG cable after taking down old unserviceable cable with stranded alluminium conductors 25.0 sqmm x 4 core,1100 Volt grade, laid in trenches compleate all as specified and as directed. Note :- (i) Pipe and bricks for cable protection and sand cushioning and earth work shall be measured and paid separately.

All as per item No. 241 above but cable of size 4 core 16 sqmm complete all as specified and directed.

Supply and fix galvanised iron pipe in 80 mm bore, light grade for protection of UG cable, laid in trenches etc complete all as specified and directed.

Cutting hard standing / road for laying of cable / protection pipe not exceeding 30cm wide and not exceeding 30cm deep and making good after laying pipe/cable etc with PCC (1:3:6) Type C2 matching with existing road complete all as specified and as directed

Supplying and erecting steel tubular swaged pole, 9 mtr hight confirming to IS-2317/1980 type 410-SP-31,complete with cast iron base plate , finial taper plug , bolts, nuts and screws etc including two coats of aluminium paint on exposed surface of poles and two coats of black bituminious paint on embeded portion, numbering of poles complete, including taking out damaged steel tubular pole/ prestressed concrete pole with porcelain insulator and demolition of cement concrete complete all as specified and as directed. Note:- PCC will be measured and paid separately.

Supply and fix, Hot pressed moulded SMC junction box of inside dimension 300 mm x 150 mm x 170 mm to be fixed to pole with provision of 2 number aluminium bus bar of size 25x5mm with mild steel work complete all as specified and as directed.

Supply and fix high density polyethylene pipe (HDPE), Class 2, 15 / 20 mm bore / dia fixed to electric pole with and including 20mm x 3mm GI clamps with every 1 mtr spacing complete all as specified and directed. (Note : Cost of fixing clamps shall deemed to be included in the quoted rate.)

Material and labour for wiring with two run of PVC insulated, FRLS unsheathed, single core, multistranded copper conductors of size 1.5 Sq mm and one run of same size of copper conductor as continuity earth wire, drawn through HDPE pipe complete all as specified and as directed. Note : (i) Two run of 1.5 Sqmm + one run of 1.5 Sqmm cable for earth continuity wire shall be measured as an one unit i,e One Rm. (ii) HDPE Pipe shall be measured and paid separately.

Supply and fix, in repair, LED Street light luminaries with panel including LED Lamp of 25 Watt complete including GI bracket of Medium grade pipe, bent to shape,32 mm bore,1.2 mts long fixed with clamps 25x4 mm MS flat of suitable size, nut bolts and washers complete, including preparing new surfaces of iron and steel and applying with two coats of aluminium paint over one coat of red oxide primer complete all as specified and as directed.

Supply and fix, in repair, LED Street light luminaries with panel including LED Lamp of 60 Watt complete including GI bracket of Medium grade pipe, bent to shape,32 mm bore,1.2 mts long fixed with clamps 25x4 mm MS flat of suitable size, nut bolts and washers complete, including preparing new surfaces of iron and steel and applying with two coats of aluminium paint over one coat of red oxide primer complete all as specified and as directed.

Supply and fix LED Flood light luminaries complete with panel and including LED Lamp of 200 Watt complete all as specified and directed.

A. Check, Inspection, maintanance and servicing including Engine/Alternator/Control panel of DG set of capacity 160 KVA for routine check up for smoth functioning complete all as manufacturers instructions and all as directed by Engg - In - Charge (a) Checking of lubricating oil condition (b) Checking engine for oil, disel, water leakage and correcting the same (c) Checking of all the nut bolts of engine and alternator (d) Checking of all belts and adjust the tenson properly (e) Cleaning of air filters (f) Checking and readjusting the valve clearance (g) Change of Oil/Fuel filters and engine oil if necessary (h) Checking of startor motor battery and charger (i) Checking of cooling system and fuel system (j) To check all power cables and AVR connections and mounting bolt tightnees of alternator (k) To check the function of AVR genaral checks (l) To check control panel meters and gadgets functiong (m) To check all control and safety wirings. B. (a) Checking of flexible coupling of engine and alternator (b) Cleaning of crank case ventilation pipe (c) Checking of injectors and fuel pump (d) Checking of alternator and carbon brushes of following capacity DG sets. NOTE : (1) Spares required will be paid and measured separately (2) Inspection/checking report submit as per manufacture recommendation of Kirloskar (3) Make of spare recommendation by Auth dealer.

Supply only Engine oil 20 W 40 Make Castrol GTX/Servo/Kirloskar/Eicher Genuine complete all as specified and directed.

Supply only lub oil filter for DG Set upto 160 KVA capacity complete all as specified and directed.

Supply only fuel filter for DG Set upto 160 KVA capacity complete all as specified and directed.

Supply and toping up of coolant K SUPER COOL PLUS-50-50 PREMIX complete all as specified and directed.

Supply and fixing of air cleaner element including taking out of old unsv part complete all as specified and directed.

Cutting hard standing / road for laying of pipe, not exc 30 cms wide and not exc 30 cms deep, and getting out in soft/loose soil, etc complete all as specified and as directed.

Material and labour for PCC (1:3:6) type C-2 (using 40 mm graded aggregate) not exc 30 cms wide and not exc 30 cms for filling and making good of disturbed surfaces of road/hard standing etc complete all as specified and as directed.

Supply and fix in repair rubber insertion/ gasket 6mm thick for 150mm dia pipe joints complete all as specified and as directed.

Supply and fix 80 mm bore cast iron sluice valves, Non rising type, (ISI marked) PN 1.6 conforming to IS-14846/2000, both end flanged,with stainless steel spindle, iron hand wheel including all necessary fixing and jointing arrangement such as MS nuts,bolts, washers and gasket etc and testing complete including taking down old unserviceable sluice valve complete all as specified and as directed.

All as per Item No. 261 above, but for size 100 mm bore complete all as specified and directed.

All as per Item No. 261 above, but for size 150 mm bore complete all as specified and directed.

Supply and fix 100 mm bore Diapharm valves, Non rising type, (ISI marked) PN 1.6 conforming to IS-14846/2000, both end flanged,with stainless steel spindle, iron hand wheel including all necessary fixing and jointing arrangement such as MS nuts,bolts, washers and gasket etc and testing complete including taking down old unserviceable sluice valve complete all as specified and as directed.

Supply and fix 100 mm bore cast iron butterfly valves, Non rising type, (ISI marked) PN 1.6 conforming to IS-14846/2000, both end flanged,with stainless steel spindle, iron hand wheel including all necessary fixing and jointing arrangement such as MS nuts,bolts, washers and gasket etc and testing complete including taking down old unserviceable sluice valve complete all as specified and as directed.

All as per item No. 265 above, but for size 80 mm bore complete all as specified and directed.

Supply and fix 80 mm bore cast iron Non Return valves, Non rising type, (ISI marked) PN 1.6 conforming to IS-14846/2000, both end flanged,with stainless steel spindle, iron hand wheel including all necessary fixing and jointing arrangement such as MS nuts,bolts, washers and gasket etc and testing complete including taking down old unserviceable Non Return sluice valve complete all as specified and as directed.

Supply and fix 100 mm bore cast iron Non Return valves, Non rising type, (ISI marked) PN 1.6 conforming to IS-14846/2000, both end flanged,with stainless steel spindle, iron hand wheel including all necessary fixing and jointing arrangement such as MS nuts,bolts, washers and gasket etc and testing complete including taking down old unserviceable Non Return sluice valve complete all as specified and as directed.

Dismantling for repairing of existing unserviceable 80 mm bore sluice valve without disturbing normal water supply and replacement of unserviceable stainless steel spindle with lock nuts & gland packing (Rubber gasket) cover with adjustable bolts and nuts (Two No’s) including refixing and testing complete all as specified and as directed.

All as per item No 269 above but size 100 mm bore complete all as specified and directed.

All as per item No 269 above but size 150 mm bore complete all as specified and directed.

Material and labour for construction of brick masonary valve pit of size 1000 x 1000 x 600mm (Internal dimension) with Excavation , and earth work , RFR and removal of surplus spoil as required, in any type of soil, PCC 1:4:8 Type D2 as in foundation,100 mm thick,, Brick masonry wall built in cm 1 :6. PCC 1:2:4 type B1 for coping 50 mm thick, including use and waste of formwork, Rendering in CM 1:4 15 mm thick both side, finished even and smooth for inner side without using extra cement and fair and even from outer side. incl provision of MS sheet cover fabricated out of 3 mm thick sheet with angle iron frame made out of 40 mm x 40 mm x 6 mm with hold fast to secure the frame, locking arrangement, handle of suitable size and, preparing new steel and iron surfaces and applying two coats of synthetic enamel paint (first quality) over a coat of zinc chrome primer, and applying 3 coats of white wash to new plastered /concrete surfaces including preparation of surfaces complete all as specified and directed. Make of steel :- Rinl / Sail / Tisco/JAI Balaji industries ltd / Shyam Steel industries Ltd. / SPS stell rolling mills ltd / SRMB Srijan Pvt Ltd / Electrosteel steels ltd / Shyammetallics and energy ltd / Jindal Make of paint ( First quality):- Asian / Berger / Shalimar.

Material and labour for fabrication and fixing of valve chamber cover, made out of 3 mm thick MS sheet including mild steel angle iron (40X40X6mm) suitable for valve pit of size 1000 x 1000mm (internal dimension) with required hinges and welded to frames and locking arrangement and painted with two coats of synthetic enamel paint over a coat of red-oxide zinc chrome primer to steel surfaces including taking out old damaged MS cover with frame complete all as specified and as directed. Make of steel :- Rinl / Sail / Tisco Make of paint ( First quality):- Asian / Berger / Shalimar.

Material & Labour for Run lead joints for 80mm bore cast iron pipes and fittings etc., (Spigot and Sockets) including testing complete all as specified and as directed.

All as per Item No 274 above but for 100mm bore pipes complete all as specified and directed.

All as per item No 274 above but for 150mm bore of pipe complete all as specified and directed.

Taking out from trenches or taking down from wall GI steel tubing and connections, 20 mm bore, setting aside and cleaning the serviceable pipe for re-laying/ re-fixing or removal of unserviceable pipe from site of work complete all as directed.

All as per item No 277 above but for 25 mm bore of pipe complete all as specified and directed.

All as per item No 277 above but for 40 mm bore of pipe complete all as specified and directed.

All as per item No 277 above but for 50 mm bore of pipe complete all as specified and directed.

Relaying of old serviceable GI pipe 20mm bore obtained from serial no 277 here in before with spigot and socket ends in new or old position in any length, laid in trenches after cleaning of inner surface and applying with two coats of black bituminous paint (sutiable for drinking water purpose) including testing complete all as specified and directed.

Relaying of old serviceable GI pipe 25mm bore obtained from serial no 278 here in before with spigot and socket ends in new or old position in any length, laid in trenches after cleaning of inner surface and applying with two coats of black bituminous paint (sutiable for drinking water purpose) including testing complete all as specified and directed.

Relaying of old serviceable GI pipe 40mm bore obtained from serial no 279 here in before with spigot and socket ends in new or old position in any length, laid in trenches after cleaning of inner surface and applying with two coats of black bituminous paint (sutiable for drinking water purpose) including testing complete all as specified and directed.

Relaying of old serviceable GI pipe 50mm bore obtained from serial no 280 here in before with spigot and socket ends in new or old position in any length, laid in trenches after cleaning of inner surface and applying with two coats of black bituminous paint (sutiable for drinking water purpose) including testing complete all as specified and directed.

Supply and fixing of 20 mm bore GI tubing, medium grade with all new fittings as required complete fixed to walls and ceilings or laid in floors/trenches including testing complete all as specified and directed.

All as per item No 285 here in before but for 25 mm bore of pipe complete all as specified and directed.

All as per item No 285 here in before but for 40 mm bore of pipe complete all as specified and directed.

All as per item No 285 here in before but for 50 mm bore of pipe complete all as specified and directed.

M&L for Minor leakage rectification wk of water supply line for GI pipe of size ranging from 15 to 25mm complete within 4-6Hrs. of raised complaint complete all as specified and directed.

All as per item No. 289 above but for 40/ 50mm bore GI pipe complete all as specified and directed.

Supply and fix 20 mm bore gun-metal, gate valves, with iron wheel head, screwed both ends for iron pipe and fixed after taking down old unserviceable one complete all as specified and directed. Make : Audco/Laxmi/ Uphadhyay.

All as per item No. 291 above but 25 mm bore complete all as specified and directed.

All as per item No. 291 above but 40 mm bore complete all as specified and directed.

All as per item No. 291 above but 50 mm bore complete all as specified and directed.

Supply and lay 3 layer PP-R polypropyline random pipes SDR 7.4/PN/16 stabilised and anti-microbial welded water supply including all PP-R plain & bras threaded polypropyline random fittings fixed complete in trenches of size 50 mm bore (external) including testing and taking down old unserviceable PP-R pipe complete all as specified and directed.

Supply and lay 3 layer PP-R polypropyline random pipes SDR 7.4/PN/16 stabilised and anti-microbial welded water supply including all PP-R plain & bras threaded polypropyline random fittings fixed complete in trenches of size 40 mm bore (external) including testing and taking down old unserviceable PP-R pipe complete all as specified and directed.

Supply and lay 3 layer PP-R polypropyline random pipes SDR 7.4/PN/16 stabilised and anti-microbial welded water supply including all PP-R plain & bras threaded polypropyline random fittings fixed complete in trenches/on wall, ceiling or laid in floor of size 32 mm bore including taking down old unserviceable PP-R pipe complete all as specified and directed.

Collecting portable water sample before and after treatement from different pump house in clean bottle from location as directed for testing of physical test, chemical test, as per IS-10500-1991 from govt laboratory or any government recognized institute and submitting test report complete all as specified and directed.

SETH GHANSHYAM DAS LAKHMAMI AND CO (BID ID -3182497)

SENCO (BID ID -3178403)

M/S KARTICK DUTTA (BID ID -3179800)

M/S MAHENDRALALL DUTTA (BID ID -3180238)

SHRI MILAN CHANDRA DAS (BID ID -3180331)

RUNJEN CONSTRUCTION (BID ID -3182371)

RADHA ENTERPRISE (BID ID -3179352)

RBS Builders (BID ID -3183088)