High mast lights will be installed near the gate of the taluk stadium and at the corner of the dargah in ward no 18 In RNR CMC Limit.

High mast lights will be installed near the gate of the taluk stadium and at the corner of the dargah in ward no 18 In RNR CMC Limit.

Fabrication, Supplying, Erection, Testing and Commissioning of ...... Mtrs long polygon high mast with Single / Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top secti...

LED Flood Light : .Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injec...

Fixing halogen/metal halide /SVL/IL/LED floodlight fitting over existing pole / wall ceiling including clamps, bolts, nuts and wiring using suitable capacity wires. (P.No.56 I.No.13.5, of S.R.2023-24 ...

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. and M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint ....

Supplying of Switch disconnector fuse unit (TPN) HRC type (but without HRC fuses). With AC-23A duty and as per IS- 13947. 63Amps (P.No.15, I.No.5.8.1, of S.R. 2023-24 PWD Ele SR)

Supplying and fixing HRC fuse units base on existing switch / panel board. 32 to 63 Amps (P.No.15, I.No.5.9.2, of S.R. 2023-24 PWD Ele SR)

Supplying of on load change over switches 4 poles, AC-23A Duty, 415V, 50Hz, AC Supply. (Open Execution) Up to 63Amps(P.No.15, I.No.5.11.1 of S.R. 2023-24 PWD Ele SR)

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C. (P.No.19 I.No.5.38 of S.R. 2023-24 PWD Ele SR)

Supplying and fixing Microprocessor Based Astronomical timer Switch with using necessary bolts, nuts and washers. (P.No.21, I.No.5.48 of S.R. 2023-24 PWD Ele SR)

Supply and fixing of 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washersand wiring etc., complete with AC-3 Rating and as per IS-13947. 50 A(P....

Supply and fixing polished wood board made of not less than 15mm thick plank on both sides of not more than 2 pieces and fixing the same to the wall using tapered inverted wooden plugs screws. 20"x20"...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 63Amps (P.No.14, I.No.5.7.3 of S.R. 2023-24 PWD Ele)

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63 Amps three phase 4 wire whole current class-1 Accuracy Energy Meter. (P.No.19, I.No.5.35 of S.R. 2023-24 PWD Ele SR)

1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975 25 Sqmm,...

Laying of UG Cable of various sizes using Winch Machine Laying of UG Cable in Existing Conduit Pipes (HDPE Pipe) in Concrete Roads/Tender Sure Works(P.No.56, I.No.28.05 of S.R. 23-24 PWD Ele SR)

Earth work excavation for cable trench of 0.5 to 0.75 Mtr. Width and Depth upto 1 Mtr including trial pits, depositing on bank upto a lead of 50 Mtr, Supplying and Displaying necessary Danger Boards a...

GI Pipe B - Class as per IS-1239 I No 48.04 P No 38

GI Grounding pipe, B - Class, 42 mm dia, 2.5 Mtr long, 3.2 mm thick with bolt, nut, GI Strips and washer complete Minimum Weight of GI Pipe: 7.3 Kg, (Bescom CSR 2023-24, I N-54.01)

Good Quality well burnt Charcoal for grounding purposes packed in non returnable gunny bag of 30 Kg each, (Bescom CSR 2023-24, IN-51.02)

Good Quality Salt for grounding purposes packed in 50 Kg gunny bag, (Bescom CSR 2023-24, IN-51.03, PN-22)

Aluminium End Terminal (Lug), 25 Sqmm (Bescom CSR 2023-24, IN-60.03, PN-27)

Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable, (Bescom CSR 2023-24, IN-35.01, PN-15), Up to 4C x 50 Sqmm

Earth work excavation by manual means for drains,canals, waste weir, draft, approach channels, key trenches, foundation of bridges and such simillar works in all kinds of soils , as per drawing and te...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub-structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

Supplying, Fitting and Placing TMT Fe 550 Reinforcement in Foundation / Substructure / Superstructure complete as per Drawing and Technical Specifications. Issue Rate:- Ordr No.SEBC:TB:RATE:2022-23/...