8266 SPECIAL REPAIR TO TOILET BATHROOMS OF BLDG NO P-47/B (STUDENT LIVING ACCN) AT AIPT UNDER GE (CENTRAL) PUNE

Amount

Demolition of brick work/ stone work built in cement or cement lime mortar of any description including quoins, arches, pillars etc. rubbish off outside of MOD Land complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and rubbish off outside of MOD Land complete all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided and rubbish off outside of MOD Land complete all as specified and as directed.

Dismantling floor, heath or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off outside of MOD Land

M&L for 50mm thick levelling course in cement concrete type B-1 1:2:4 using 20mm graded aggregate complete

M&L for 25mm thick levelling course in cement concrete type B-1 1:2:4 using 20mm graded aggregate complete

M&L for coloured glazed ceramic tiles of size 450x300x7 mm thick as in vertical surface set and jointed in neat cement slurry and pointed flush in white cement with pigment over and including 10mm thick baking coat of CM 1:3 complete all as specified.

M&L for non skid ceramic coloured tiles of size 300 x 300 x 7 to 8 mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15mm thick screed bed of CM 1:6 complete.

M&L for precast cement concrete block masonry exceeding 10cm in width with solid blocks of PCC (1:5:8) Gde D-5 and setting in CM 1:6 for buttress support, constructed externally both side support wall, to strenthening the wall from base complete all as specified.

Taking down cement plaster of any thickness on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc in cement mortor of any description.

M&L rendering 15 mm thick on stone masonry surfaces other than fair faces of brick work or stone surfaces in CM 1:6 all as directed.

M&L for 5mm thick plastering in CM 1:3 on fair faces of ceiling finished even smooth with thin layer of sagol finish complete all as specified and directed.

M&L for preparation of new plastered surface and applying three coats of white washing on ceiling all as specified and directed.

M&L for complete removal of existing treatment of old plastered surface and appliying three coats of white washing on ceiling all as specified and directed.

M&L for Preparation of old plastered or unplastered surfaces of wall and applying two coats of oil bound distemper complete all as specified and directed.

M&L for Preparation of New plastered surfaces of wall and applying two coats of oil bound distemper over and including a coat of primer complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of wall and applying two coats of weather proof external emulsion paint of approved make over a coat of primer complete all as specified and directed.

M&L for 75mm thick PCC type C2 1:3:6 in plinth protection finished the surface even and smooth without using extra cement complete all as specified and directed.

M & L Cutting into old masonry to form toothings for and bonding in new brick or stone work including making good in Cement mortar for new walling

M & L Stone Walling of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortor 1:4 all as specified and directed.

All as per item No 20 here-in-before but except stone. Note : old stone obtained from demolition shall be re-used.

Raking out joints/ pointing in cemet mortar to random rubble or polygonal rubble , masonry uncoursed or brought up to courses complete all as directed.

M & L for raised pointing in CM 1:4 to random or polygonal rubble, uncoursed or brought upto courses complete all as directed.

Taking down chowkats or frames with shutters w/o taking off shutter from the frame area n exc 1.5 sqm each all as specified.

Taking down chowkats or frames with shutters w/o taking off shutter from the frame area exc 1.5 sqm but n.exc 4 Sqm each all as specified.

S&F powder coated aluminium window and ventilator shutters in three track sliding (whichever the case may be ordered to sliding horizontally or vertically) with two or more shutters with sliding arrangement including rubber beading and glazing clips using aluminium sections weighing not less than 0.55 Kg/M etc complete all as specified and directed. Note : Sheet glass shall be measured & paid seperately under relevant items.

S&F powder coated aluminium ventiator with partially guaged and partically louvers shutter using 5 mm thick x 10 cm wide frosted glass strips for louvers including rubber beading and glazing clips etc using aluminium sections weighing not less than 0.55 Kg/M complete all as specified and as directed. Note : Sheet glass shall be measured & paid seperately under relevant items.

Supply and fixing stainless steel wire 0.71mm dia fixed with tinned tacks average width of aperture 1.18mm complete all as specified.

Supply and fixing 4mm thick sheet glass ordinary quality and glazing fixed to aluminium window / ventilator shutters / steel windows etc all as specified and directed

S&F II nd class hard wood ,plain, solid, straight chowkats & frames , wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, one face is covered with decorative face veneer with lipping/frame to match complete as directed

S&F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg given in SSR Part-I 2009. The width of stiles and rails shall be as specified in para 8.34.2 of SSR Part-I, 2009. Each PVC door shutter leaf consist of 4 Nos 100 mm long MS butt hinges. complete all as specified and directed.

S&F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in sketch in SSR Part-I, 2009 complete all as specified and directed.

S&F 150 mm extruded aluminium alloy anodised handles ,fabricated type.

S & F Aluminium anodised barrel tower bolt of extruded section 150mm long all as specified and directed for PVC shutters

S&F mild steel butt hinges 100mm, medium weight complete

Supply & fixing aluminium alloy anodised sliding door bolts with hasp and stapple (bolt type and fxing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of 250mm long all as specified.

Preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer.

M&L PVC (SWR) floor trap with steel grating 75 mm dia including jointing to waste pipe including removing old traps complete.

Dismantling of 75/ 100mm dia soil waste and vent pipes of cast iron/PVC jointed in cement mortar/lead joints including connected fittings complete.

M/L 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid in floors as specified and directed

M/L 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall or laid in floors as specified and directed

S&F PVC (SWR) bends 110 mm bore

S&F PVC (SWR) bends 75mm bore

S/F PVC (SWR) Branch piece single (single Y) equal or unequl 110mm dia with door access

S/F PVC (SWR) Branch piece single (single Y) equal or unequl 75mm dia with door access

S&F for 75mm dia PVC SWR junction (single 'T') equal or unequal with door access.

S&F for 110mm dia PVC SWR junction (single 'T') equal or unequal with except door access.

Supply and fixed rotational moulded polyetylene water storage tanks (cylindrical vertical with closed top) of 1000 Litres capacity hoisted and fixed in position and connecting up pipes including required size ball valve complete set of PTMT, securing access covers all as specified and directed including disconnecting existing water tank

Removing of existing treatment of old bitumenous tarfelt including cement screed bed and clean the surface with wire brush and washing with water to achieve the original surface of slab all as specified and directed.

M&L PCC 1:2:4 type B1 using 20mm graded stone agg as in roof kerbs or mud stops, rounded or chamfered on edges incl necessary form work required complete all as specified

M & L water proofing treatment to RCC roof slab, walls, chajjas etc, as specified below :- (a) M & L for 10 mm thick plaster screed bed layer in CM 1:3 with liquid water proofing material @ 200ml/Bag on concrete surfaces. (b) Preparing plastered surfaces of roof slab, walls, chajjas etc, by brooming with broom sweeping free from dirt dust etc and evenly applying a coat of approved bituminous primer @ 0.20 Kg/Sqm of area complete all as specified. (c) Laying APP polymer modified approved membrane, non woven, polyster, weighing not less than 3.5 Kg/Sqm and 3 mm thick with laps and overlaps as specified and joints sealed and applied complete by torch application method all as specified and directed. Carrying out test by flooding water for 24 hrs for leakage and seepage and rectifying the same to the entire satisfaction of GE. (d) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 ltr/Sqm on the top of membrane surfaces complete all as specified and as directed.

Supply only liqiud waterproofing material.

Taking up or down carefully steel tubing and connections including cleaning for refixing or removal to store, of following sizes :-

15 mm dia bore

20 mm dia bore.

S&F GI tubing "medium grade" galvanized with all fittings and fixed complete to walls and ceiling or laid in floors etc of following sizes :-

15mm dia bore

20mm dia bore

Refixing old steel tubing and connections in new or old postion (wall/floor/ceilings etc with new fittings) of following sizes :- Note : Old GI tubing obtained from item No 55 shall be re-used.

15mm dia

20mm dia

Cutting chases, pinning in making good to facings where required and pointing in CM 1:4 for consealed water tubing etc complete

S&F in repairs gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed of 20mm dia on stone, concrete, block, slab or wall of ISI marked complete all as directed.

S&F in repair vitreous china squatting pan "ORISSA" pattern size 580mmx440mm, white with integral foot rest including cast iron 'P' or 'S' trap and connection to trap (excluding flushing cistern & flush pipe) includintg provision of cement concrete bedding etc and making good to floor, complete all as specified

S&F in repair vitreous china pedestal pattern, white with including cast iron 'P' or 'S' trap and connection to trap includintg cement concrete (excluding flushing cistern & flush pipe but including seat cover and jet spray etc) including making good to floor, complete all as specified

S & F in repairs, brass CP soap dish complete all as specified

S&F in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete

Supply and fixed in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe but including urinal spreader) complete all as specified

S & F in repair chromium plated Tubular towel rail 20mm dia D type, 600 mm including bracket etc complete all as specified.

M & L for pre polished both side cuddappa stone slab 20 to25 mm thick as in partition/ support for platform fixed in position complete all as specified.

M&L for Granite (of any type) 16 to18 mm work (table rubbed and polished) in steps, jambs, urinal partation window-cills, WHB platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

Rounding to edges of stone slab one side ,such as in steps cooking platform and similar situations.

S&F in repairs viterous china counter wash hand basin oval shape of size 550mm x 400 mm , (excluding taps waste, chain and plug and porcelain stopper) placed with granite slab supported on cuddappa stone slab complete all as specified

S & F in repairs long body 'U' shaped Piller taps cast copper alloy with chromium plated fancy type screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed bore of pipe 15mm in kitchen sink or counter sink or basin. complete all as specified

S&F in repairs 32mm Waste fittings, brass, chromium plated for chinaware urinal, wash hand basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified

Supply and fix in repairs Chromium plated shower rose including shower arm 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified

S&F in repair 15mm bore concealed stop cock cost copper alloy screwed down pipe pressure with crutch or butterfly handle chromium plated fancy type with long shank and cup complete all as specified

S&F in repair 15mm bore chromium plated fancy type, angle cock cost copper alloy screwed down high pressure with crutch or butter fly handle with long shank & cup complete all as specified

S&F in repairs PVC connection 60cm long 15mm dia, with 2 Nos CP brass check nuts all as specified.

S & F chromium plated peg stay, set of three in each all as directed

M & L covered with MS Steel Mesh of size 100 X 100mm x 4mm thick fixed on external wall including welded with vertical support/ Bracing of MS angle /channel on all corners of wall complete all as specified(Note- MS Angle /channel are measured and paid seperately)

M & L for Injection grouting with admixture of “GROUT MIX + SBR+OPC” unique formulation, specially developed for the consolidation and strengthening of old stone masonry walls. The grout can be seen as suspension of binder particles in aqueous media that has a considerable fluidity in order to be pumped into voids and cracks within the masonry by saturation pressure grouting. The treatment comprises of enhancing the impermeability co-efficient of the masonry wall using “GROUT MIX + SBR + OPC” by Injection grouting system using Electrical pressure pumps and power tools. This to be added in a proportion of 500gm “GROUT MIX” and 3Litrs of SBR to 50kg of ordinary Portland cement (53grade). “GROUT MIX” is a free flowing, non-shrink, high strength cementious grout. It has high early and ultimate strength with excellent plastic and restrained expansion characteristics. This system comprises of drilling holes of 10 / 12 mm dia into the Masonry wall and “GROUT MIX + SBR + OPC” is pressure grouted from top. There will be an injection grouting of every one Meter intervals. Finally, the drilled holes are sealed with sealants all as per instruction of manufaturer and as directed. Make (Fosroc, Sika, Bostik)

M & L High performance concrete of 75 mm thick applied over external surface of stone wall / concrete wall at high velocity by wet mix shotcrete technology (WMS) as per IS 9012 (1978). This layer increases the wall strength and ductility. Use of M20 grade of concrete, proper curing will allow better bond between stones and the concrete layer Including scaffolding and shuttering complete all as specified and as directed. Note for item No 79 & 80 :- The iems shall be got exectued thorugh autorised agent/ dealer under supervision of manufactrure representative.

M & L excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/ dense soil.

M&L for PCC in 1:4:8 type D2 (using 40 mm graded stone aggregate) in foundation, filling of mass conctete etc

M& L RCC (Nominal mix) type B1, 1:1.5:3 (using 20 mm graded stone aggregate) for Foundations, including rafts, footings, plinth beams, bases for columns, etc. complete all as specified.

Removal of excavated material (soil) exc 1.50 Km. & n exc 5 km & depositing out side of MOD Land complete all as specified.

M & L Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cc in soil.

M&L TMT bars 10mm dia and over , cut to length , bent to shape required including cranking , bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) 0.9mm dia or securing with clips all as directed.

All as per item No 86 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders

M& L Formwork to Rough finished surface of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

M& L Rolled Joist, channel, angle, or tee sections as in framing for cladding fixed independently, with connecting plates, etc confirming to Fe 410 -W (GdeE- 250) quality A complete all as specified.

M&L for mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming toFe 410 -W (GdeE- 250) quality A complete.

M & L preparaion new steel surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as spd and directed.

S&F in repairs 15mm dia chromiun plated 2 way bib cock complete all as specified and directed Make : Parryware cat Part No T3534A1 or equivalent in CERA/ Jaquar

S&F in repairs CP health faucet with hose & hook complete specified make all as directed Make : Parryware cat Part No T9803A1 or quivalent in CERA/ Jaquar

S&F in repair chromium plated 15mm dia bib taps, fancy type, cast copper alloy with crutch of butterfly handle, screwed down, screwed for iron pipes complete all as specified and directed

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified.

Taking down the existing unserviceable main switch / DBs of any type / capacity / description as existing at site including MCBs any type and capacity making good the disturbed surfaces to match with the existing finishes all as specified.

Taking down the existing unserviceable sub main wiring of any type / description including making good the disturbed surfaces to match with the existing finishes all as specified.

M&L for point wiring of any length using approved colour coding as per IS, with stranded copper conductor 1.5 Sq.mm(Nominal area), single core, PVC insulated and unsheathed stranded FRLS cable 1100 volts grade, ISI - 694 marked in and including heavy duty, PVC casing caping including all accessories etc. heavy duty ISI marked, with Modular PVC boxes and accessorie suitable for mounting modular switches/sockets etc, and PVC insulated stranded copper conductor 1.5 Sq.mm single core cable as earth and connecting to earth dolly complete all as specified for following :-

One light point controlled by one, one way switch all as specified.

One three pin 5 Amps socket outlet point controlled by one No one way switch on same board all as specified.

One three pin 5 Amps socket outlet point controlled by one No one way switch on independent board all as specified.

All as per Item No. 95 above but with stranded copper conductor 2.5 Sq. mm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3/5 pin, 15 Amp socket outlet, independent board, including PVC insulated multistranded FRLS copper conductor 2.5 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.

S & F modular switch 6A SP one - way 230V white ivory finish complete all as specified.

S & F modular switch 16A SP one - way 230V white ivory finish complete all as specified.

S & F modular switch 6A SP two - way 230V white ivory finish complete all as specified.

S & F modular socket outlet 2/3 pin 6 amps, multipurpose 2 module 230 Volts, single pole one way suitable for plug tops, complete all as specified.

S & F for ceiling rose 2/3 terminals, PVC/ polycarbonate, isolated body ISI marked complete all as specified.

S & F for MCB DB, SPN, sheet metal enclosure, 8 way with 200 amps rated bus bar double door, fixed on wall and connecting with existing cable complete all as specified and directed.

S & F for MCB double pole rated capacity 32 amps, 230 volts breaking capacity 10 KA, C-curve complete all as specified.

S & F for MCB Single pole rated capacity 6 to 32 amps, 240 V breaking capacity 10 KA ,C- curve complete all as specified.

M & L for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, stranded copper conductor FRLS cable with continuous copper earth conductor of 4 sqmm in and including PVC casing caping incl accessories complete all as specified. Note :- 2 runs of 4 Sqmm conductor one run of 4 Sqmm earth conductor and one run of PVC casing caping shall be measured as one unit length.

Supply and fix in replacement LED Tube light fittings wall mounted, 18 W LED 6500K with Opal white Poly Carbonate diffuser provided with high efficient integral constant current LED Driver 230 V etc. complete with mounting batten including all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from ceiling rose to connector Conforming to Cat Part No. BLRB DB 118 & BLRB18 W CW LED Make :- Bajaj or Equivalant in other approved makes.

S&F in replacement of LED mirror light fitting 10 watt complete in all respect having high luminaire, integrated LED channel with white acrylic cover of 10W cap.Cat Part No BCLSB10WH of Bajaj or equivalent in other approved makes.

M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover and MS angle iron frame, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete all as specified & directed.

S&F in repairs 15 mm dia chromium plated fancy type 2 way bib cock complete all as specified and directed. (Make - Parryware cat Part No T3534A1 or equivalent in CERA/Jaquar)

S&F in repairs CP health faucet with hose & hook complete specified make all as directed. (Make - parryware cat Part No T9803A1 or equivalent in CERA/Jaquor).

S&F in repair chromium plated fancy type 15mm dia bib taps, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipes complete all as specified and directed.

L.T Associate