OPERATION AND MAINTENANCE DGF -2025-26

Amount

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS 20B and Sand, silt or other loose soil, wet sand, silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water wherever necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and completed, cleaning and levelling the site etc., complete - Narrow Foundations - First Depth Upto 2.00M

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS 20B and Sand, silt or other loose soil, wet sand, silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water wherever necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and completed, cleaning and levelling the site etc., complete - Plinth Beam

Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

Providing Granular surface base to the required surface using murram, Granular soil of size varying from 4mm to 75mm including cost of material and cost of labour for stacking, spreading and consolidating layer by layer (Each layer not exceeding 100mm) including hire charges of Roller etc, complete as per the direction of Departmental officers.

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation - Plinth Beam

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13cm dia spaced at not more than 75cm centre to centre etc. complete complying with the standard specificaiton. - For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

Providing and laying in position Standardised Concrete Mix M-30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 400Kg/ cum and maximum water cement ratio of 0.45 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. Basement

Providing and laying in position Standardised Concrete Mix M-30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 400Kg/ cum and maximum water cement ratio of 0.45 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. Ground Floor

Providing and laying in position Standardised Concrete Mix M-30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 400Kg/ cum and maximum water cement ratio of 0.45 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. First Floor

Providing and laying in position Standardised Concrete Mix M-30 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 400Kg/ cum and maximum water cement ratio of 0.45 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. Second Floor

Supply and fabrication of steel required for all RCC items of works involved in the schedule, cost of steel at site fabrication, labour charges for cleaning the rods straightening, cutting, bending, tying grills, including overlapping to the required length whenever necessary and placing the reinforcement in position as as per design given and specified in the drawings, including cost of binding wire, provision of spacer bars, cover blocks and all other incidental charges etc complete as per standard specification

Supplying and filling the basement with Good carted Earth 5km away from the site and filling in layers of not more than 15cm thick well rammed watered and compacted - etc., complete complying with standard specification.

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9"X43/8"X 23/4" standard specification including finishing, curing, etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost). - Upto Basement

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9"X43/8"X 23/4" standard specification including finishing, curing, etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost). - Ground Floor

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9"X43/8"X 23/4" standard specification including finishing, curing, etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost). - First Floor

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9"X43/8"X 23/4" standard specification including finishing, curing, etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost). - Second Floor

Brick Partition walls in CM 1:3 (one cement & three Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9"X43/8"X23/4" using hoop iron reinforcement 2 Nos of 6mm dia M.S.rod at every three alternate layers and the cost shall inclusive of iron reinforcement, Brick work etc, complete as per standard specification - Ground Floor

Brick Partition walls in CM 1:3 (one cement & three Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9"X43/8"X23/4" using hoop iron reinforcement 2 Nos of 6mm dia M.S.rod at every three alternate layers and the cost shall inclusive of iron reinforcement, Brick work etc, complete as per standard specification - First Floor

Brick Partition walls in CM 1:3 (one cement & three Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9"X43/8"X23/4" using hoop iron reinforcement 2 Nos of 6mm dia M.S.rod at every three alternate layers and the cost shall inclusive of iron reinforcement, Brick work etc, complete as per standard specification - Second Floor

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding, grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 10mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Weathering Course with Concrete Broken Brick (S.I.No.278) & (P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32:12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers etc., complete as per standard specification.

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three plastering sand (P- Sand)) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete

Supplying & fixing door shutters for Solid Core Flush Shutters with Teak ply on both side with teak wood lipping alround 35mm thick, single leaf confirming to IS:12406/1989 with 35x12mm T.W. Lipping on all edges with necessary adhesives and CP screws complying with standard specifications. The rate is inclusive of threee coats of best quality varnish but excluding cost of furniture fittings, such as 300 mm tower bolt 2nos, 200mm towerbolt 1 No. 300mm Aldrop 1 No. Alu handle ornamental type 2 Nos and 1No. Door stopper etc complete.

Supplying, fabricating and fixing in position of Alumi.Anod.natural colour matt finish door half glazed and half PLB board using 12 mm thick PLB board and 5.5 mm thick glazed door using rectangular Alu.Box section of following sizes for frame and shutter with necessary accessories such as rubber beading, Al. Clips, Best double action floor springs, Aluminium Handles on both sides,floor stopper,Tower bolt, Locks and glass including all materials, Labour, power consemption charges required for fabrication if necessary chipping, dismantling making necessary holes in RCC Coloums, Beams or Masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc.,complete. The Alumi. surface must be anodised with matt finish under electrically controlled condition in accordance with IS specification 1868 / 1962 of Anodic filthickness of not less than 15 Microns (Fifteen) for all sections.All the materials should be got approved by the Engineer - In -charge before fixing as directed.

Supplying & fixing door shutters for Solid Core Flush Shutters with Teak ply on both side with teak wood lipping alround 35mm thick, single leaf confirming to IS:12406/1989 with 35x12mm T.W. Lipping on all edges with necessary adhesives and CP screws complying with standard specifications. The rate is inclusive of threee coats of best quality varnish but excluding cost of furniture fittings, such as 300 mm tower bolt 2nos, 200mm towerbolt 1 No. 300mm Aldrop 1 No. Alu handle ornamental type 2 Nos and 1No. Door stopper etc complete.

Supply and fixing of Stainless steel (Salem stainless steel) Door frame ( Box section using stainless steel plate of 1.6mm thick) of size 100mm X 60mm with a rebate of 30 / 35mm X 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel holdfast etc.complete as per standard specification.

Supply and fixing of PVC Solid Doors using 19gauge 19mm MS Sq,tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails. The Steel Tubes shall be covered with 5mm thick Solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including furniture and fittings. The over all size of styles shall be 50mm X 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm X 30mm. The over all size of frames shall be 50mm X 45mm with suitable tabate for housing the shutter etc, complete as per standard specification.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 25GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with spag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown olour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the executive Engineer before use on work

Supply & fixing of Ano. Alu. Fixed window with three panels using 62x38x2 mm @ 1.174 kg/m thick extruded box section as verticals and horizontal member and fixing 4mm thick plain / frosted/ pin headed glass approved quality with necessary glazing clips, rubber beading etc., complete.Necessary dismantling making holes in RCC columns, beams, masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing as directed by the departmental officers.The Al.Surfaces is to be anodised with matt finish usder electrically condition in accordance with ISI1868/1962 specification for an average anodic film thick of not less than 15 microns.

Supplying and fixing UPVC (Un-Plasticized PolyvinylChloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

Plain Cement Concrete 1:1.5:3 (one cement, one and half Commercial Sand (M- Sand) and three coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges etc., complete as per standard specification

Paving the floor with design Antiskid ceramic tiles (colour and shade as directed) of size 305mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three plastering sand (P- Sand)) 20mm thick laid in-situ and pointed with same coloured cement etc, complete as per standard specification.

Paving the floor with pre-polished Cement based hydrualically pressed Anti-Skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three plastering sand (P- Sand)) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg/sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers.

Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (one cement three plastering sand (P- Sand)) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Dadooing walls with Glazed tiles of sizes 305mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (one cement, two plastering sand (P- Sand)) over 10mm base layer plastering and pointing with white cement neatly as directed etc., complete as per standard specification

Supplying and laying in flooring SYNTHETIC GREY colour fully polished Granite Slabs of size 1200 X 600mm (Super fine polished with machine cut edges) of 18mm to 20mm thick (average) laid over base layer of cement mortar 1:3 (one cement and three plastering sand (P- Sand)) - 20 mm thick and applying cement slurry & pointed with white cement and colour pigments to the colour of stones and polished neatly as directed by the deparmental officers

Dadooing Supplying and laying in flooring with fully polished Sinthetic Grey colour Granite stone of 10mm thick (average) of 2' X 1' in size laid in cement mortar 1:2 (one cement and two Plastering sand) 20mm thick & pointed with same colour of cement etc., complete as per standard specification

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 83mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40 N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, Stone Dust cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Supply and fixing Perculated gypsum board false ceiling using 18 mm thick of approved Quality and design suspended from the ceiling using ‘U’ shaped Galvanised Iron channel of size 25 x 25 x 0.55 mm thick at 1.20 M centre to centre on both longitudinal and cross direction for vertical support and fixing ‘U’ shaped G.I. Channel of size 50 x 30 x 0.55 mm thick at 0.60 m centre to centre on cross direction and fixing of ‘U’ shaped G.I. channel of size 50 x 10 x 0.55 mm thick at 0.90 m centre to centre on longitudinal direction respectively for horizontal support by using T.W. reapers at corners and at intermediately and fixing of plaster of paries on the panel provided as per design/pattern given by the site officer and finishing the ceiling surface with some plaster of paries materials etc. Necessary openings should be made for providing spotlights, florescent tubes in the ceiling by using kit ply 12 mm thick and opening should be covered with Acrylic panel etc. complete complying with standard specification and as directed by the dept officers. All the materials should be got approved before use work.

Providing 115mm thick POP cornice fixed on wall or false ceiling and fixed by screws and all other accessories and the deign should be got approved by the department officers etc., complete complying with standard specification and as directed by the Departmental officer.

Painting two coats of newly plastered wall surface with ready mixed exterior emulsion paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification.

Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats in all floors over the new wood work with Ready Mixed Paint of approved quality and colour with one coat of priming coat including cost of painting materials, brushes, putty, preparation of surfaces and scaffolding charges etc., complete complying with standard specification and as directed by the departmental officer

Painting the new iron work with two coats of best pproved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat and including cost of painting materials, brushes, putty, preparation of surfaces and scaffolding charges etc., complete complying with standard specification and as directed by the departmental officer.

Providing & fixing PVC RAIN WATER DOWNFALL PIPE of 110mm dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of "U" clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/SqCm]

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications

Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and fixing in position White / Colour Special Delux Model Glazed Cascade Type Parryware / Hindware / Equivalent Wall Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications.

S/F in position of Indian Make White/Colour glazed earthen ware lipped mouth Flat Back Urinal of best approved quality with G.I.Pipe connection to suitable length,32mm bell mouthed P.V.C connection ,15mm dia G.M.Wheel valve,fixing the urinal to the wall in position with necessary T.W.plugs ,clamps,screws, shellac etc.,including dismantling masonry if necessary and redoing the same to original condition ,fixing the 15mm dia. G.I.pipe connection and wheel valve ,painting the pipe with two coats of approved paint over one coat of primer and checked without any leakage complete, complying with standard specifications.

Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.

32MM dia,PVC pipe

25mm dia.PVC pipe

20MM dia,PVC pipe

Supplying and fixing in position indian make bewelled edge mirror of approved quality and brand of size 600 X 450mm wth necessary plastic back, PVC frame with bottom stand of approved colour with brass screws,rawal plugs etc., complete complying with standard specifications.

Supplying and fixing best approved quality Brass C.P anodised Towel rail 600mm. long and 20mm Diameter with brackets of same material including cost of Teak-Wood plugs and C.P.Screws etc., complete complying with standard specifications

Supplying and fixing best approved quality C.P.Soap Tray of size 150mm X 100mm including cost of Teak Woodplugs, brass screws complete complying with standard specifications.

Supply and fixing of PVC. Nahini / Floor Trap with stainless Steel Gratings - 100 mm x 75 mm including all charges etc, complete as per standard specification.

Supplying laying and jointing G.I. Pipes of approved quality and best varity of B Class pipe of the following sizes including fixing G.I specials but excluding cost of such specials cutting threading of pipes and fixing to wall with necessary teak wood plugs, clamps and screws masking holes on the wall or drilling holes in roof and making good the dismandled portions to original conditions with necessary brick work and concrete and plastering where ever necessary with necessary scafolding charges. The pipes are to be painted with two coats of good variety and best approved quality of synthetic enamel paint over a priming coat of red-oxide primer etc., complete.

20MM dia,G.I pipe

25MM dia,G.I pipe

32MM dia,G.I pipe

Supplying and fixing in position first quality and approved variety of Gun Metal Gate Valve (Heavy type ) with I.S.I.mark of the following sizes including cost of Shellac , thread etc,.including labour for cutting and threading of G.I.Pipes etc.,complete complying with standard specifications for both internal and external water Supply arrangements.

20mm dia G.M.Gate Valve

25mm dia G.M.Gate Valve

32mm dia G.M.Gate Valve

Suppling and fixing in position 15mm.diameter brass screw down tap (heavy duty) of approved make conforming to I.S.specifications and quality including cost of shellac, thread etc.complying with standard specifications and including cutting and threading wherever necessary.

Supply and fixing of following Plumbing G.I.materials

15mm dia G.I coupling

15mm dia G.I Tee

15mm dia G.I Elbow

15mm dia G.I Bend

15mm dia G.I union

20mm dia G.I coupling

20mm dia G.I Tee

20mm dia G.I Elbow

20mm dia G.I Bend

20mm dia G.I union

25mm dia G.I coupling

25mm dia G.I Tee

25mm dia G.I Elbow

25mm dia G.I Bend

25mm dia G.I union

32mm dia G.I coupling

32mm dia G.I Tee

32mm dia G.I Elbow

32mm dia G.I Bend

20mm X 15mm dia G.I Reducer

20mm dia G.I union

25mm dia G.I coupling

25mm dia G.I Tee

25mm dia G.I Elbow

20mm X 15mm dia G.I Reducer Tee

32mm X 25mm dia G.I Reducer Tee

Supplying and fixing in position P.V.C. specials such as plain bend, door bend, plain tee, door tee, offsets,Y-junction, plain or with door of various sizes best quality confirming to I.S.S and providing leakproof joints including fixing to wall and giving connection to the P.V.C, soil stacks, dismadling the brick masonry or R.C.C. floor or Roof slab and redoing the dismandled portion to original condition etc., complete complying with standard specifications.

110mm dia PVC bend

110mm dia PVC Tee

110mm dia PVC Door bend

110mm dia PVC Door Tee

110mm dia PVC Door Yee

90mm dia PVC bend

90mm dia PVC Tee

90mm dia PVC Door bend

90mm dia PVC Door Tee

90mm dia PVC Door Yee

Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitary fittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications.

110mm dia PVC 6KSC Pipe

90mm dia PVC 6KSC Pipe

Supplying and fixing P.V.C. ventilating shaft of 100mm dia and 3m height of best approved quality and as per standard specifications.

Supplying and fixing in position C.I.Manhole covers (light or heavy duty) of 600 X 600mm in size in C.M 1:3 (One Cement and Three Plastering Sand (P - Sand)) 20mm thick, of best approved quality and as per standard specifications etc.,complete.

Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For Electronic regulator). PWD - ED - 2024-2025 - SD 35

Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 x 100 x 113 mm TW switch box with 3mm hylum sheet cover for 5A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. PWD - ED - 2024-2025 - SD 36

Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour. PWD - ED - 2024-2025 - SD 54

Supply and fixing of single box type 4'36 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting PWD - ED - 2024-2025 - SD 87

Supplying and fixing of 1200mm ( 48'' ) sweep AC ceiling fan complete with regulator with 1M down rod including S & F of fan clamp with side plates and cross arm PWD - ED - 2024-2025 - SD 107

Earthing as per P.W.D. standard with an earth electrode of 2Mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work. PWD - ED - 2024-2025 - SD 212

Supply and fixing of 3 phase 4 wire 4 way ICDB of 32 A per way with 100 A TPN MC switch with suitable trunking box Ms cable entry boxes and internal connection on suitable angle iron frame work with earth connection PWD - ED - 2024-2025 - SD 175

Supply and fixing of Horizontal type 4 way triple pole neutral MCB distribution board in sheet steel enclosure with 40 A 4 pole MCB isolater as incoming and 12 Nos. 6A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. The MCBDB and MCB's should be with the ISI mark (lik standard make) PWD - ED - 2024-2025 - SD 157

Supply and run of 2 of No.8 SWG GI wire for guarding with cradle with No.8 SWG GI wire at the equal interval of 1.5m PWD - ED - 2024-2025 - SD 75

Supply and run of 4 X 6 sq.mm (84/0.3) 7/20sqmm PVC unshealed copper cable in suitable PVC rigid pipe concealed on wall and ceiling withcontinuos earth wire connection of 14 SWG TC wire with painting of suitable colour PWD - ED - 2024-2025 - SD 68

Supply and fixing of 300mm (12") sweep AC exhaust fan complete with necessary wall opening and making good of the wall. PWD - ED - 2024-2025 - SD 114

Wiring with 2 x 4sqmm (56 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 x 100 x 113 mm TW switch box with 3mm hylum sheet cover for 15A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC power plug point. PWD - ED - 2024-2025 - SD 39

Supply and fixing of AC / DC 76mm Buzzer / call bell suitable for 230 volts 50 c/s single phase AC supply on suitable TW Board with push switch PWD - ED - 2024-2025 - SD 105

Supply and fixing of 20 Amps DP plug and socket in sheet enclosure with 32 A DP MCB in flush with wall with earth connection for AC plug PWD - ED - 2024-2025 - SD 144

Supply and fixing of 3Nos 5 Amps (3 pin and 2 pin ) compined flush type wall socket with control switches concealed in suitable TW Box covered with Hylem sheet in flush with wall earth connection for Computer plug socket PWD - ED - 2024-2025 - SD 142

Supply and fixing of 200 Amps three phase 500 V 4 pole change over switch (GEM / HAVELLS / HPL / STANDARD / EQUIVALENT) etc complete as per standard specification. PWD - ED - 2024-2025 - SD 651

Supplying and laying of PVC insulated, PVC sheathed, armoured, LTUG cable of size 2 core 10 sqmm Al.cable clamped on walls etc, complete as per standard specification PWD - ED - 2024-2025 - SD 198

Supplying and fixng of cable gland and termination with earth connection of size 2 core 10 sqmm etc, complete as per standard specification. PWD - ED - 2024-2025 - SD 160

Supply and fixing of TNEB Board suitable for 3 Phases 63A service connection made up of suitable angle iron frame work of size 2 feet x 1 1/2 feet using angle iron of size 1 1/2" x 1 1/2" x 1/4" rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos 63A fuse units(500V) 1 No. Neutral link, copper earth flat of size 1" x 1/4" with inter connection of EB meter to fuse units by 7/16 PVC insulated copper wire with earth connection complete. PWD - ED - 2024-2025 - SD 131

Supply and fixing of 32 A TPN MC switch on incoming and 3 Nos 32 A DPMC Switch (Front Handle) as outgoing with suitable adoptor box with suitable MS cable entry box trunking boxes and internal connections on internal connections on suitable AI frame work with earth connection etc, complete. PWD - ED - 2024-2025 - SD 156

Supply and fixing of 3 phase 4 wire 4 way ICDB of 16 A per way with 32 A TPN MC switch with suitable MS cable entry boxes trunking box and internal connections on suitable angle iron frame work with PWD earthing etc, complete. PWD - ED - 2024-2025 - SD 157

Earthing as per the ISI specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry . PWD - ED - 2024-2025 - SD 211

Supply and run of 2 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG Cu wireand making good of the concealed portion with suitable colour PWD - ED - 2024-2025 - SD 351

Supply fabrication erection and commissioining of 63A capacity dust and vermin proof floor mounting cubical type meter panel board made up of 16 SWG CRCA sheet steel for outer body on suitable AI frame work with 1 "x1/8" Cu. Bus for 3phases and 1"x1/8" bus for netural on synthetic moulded compound bus support with hylum sheet separation with providing necessary space for fixing of 7nos single phase energy meters on with double earth connection by 1"x1/8" cu. Flats with 2coats of high quality enamel paint over one coat of red oxide primer with following arrangements.6mm thick hylum sheet with separate door with visible glass for taking energy meter reading and supply and fixing of 7Nos 32A SP MCBs &32A fuse unit sets as per the the following details a) 3phase indicator lamp arrangment with fuse uints and control switches. b) Inter connection with busbars to all meters,MCBs and fuse units. c) Providing necessary arrangement for sealing 7nos energy meter by TNEB authorities. d) Floor mounting arrangement with 70mm x 40mm M.S. Channel frame work with necessary foundation bolt arrangment. e) Danger board as per IE rules & regulation

Supply and run of 20 pair un armoured 0.5mm telephone wire in PVC Condiut insulated unsheathed etc, complete as per standard specifications. PWD SOR VOL 1 M 2172

Supply and run of CAT 6 LAN cable in pvc conduit in PVC Condiut insulated unsheathed etc, complete as per standard specifications. PWD SOR VOL I - M2184

Supply and delivery of 2000 lit capacity and fixing of HDPE tank as per IS 12701/1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,complete as per standard specification. PWD SOR VOL II - WD-M1419

Supplying and fixing in position of Alu. Anodised Partition with 62x38x2mm extruded box section at bottom vertical and horizontal members. The vertical member are spaced at 90 cm c/c and to horizontal members are spaced at 1.2M, 2.1M and 2.4M height the bottom panels should be covered with 12 mm thick PLB exterior grade and the top and middle panels should be fixed at 4mm thick glass thick glass with necessary glassing clips.rubber beading, etc., including necessary dismantling holes in RCC columns, beams masonry wherever necessary with power power drill to the extent required and made good to the original conditions after fixing as directed by the departmental officers. All the Aluminium sections should be anodised to 1.5microns as per ISI specification 1868/1962 and should be got approved by the Executive Engineer before use.

Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydraulic hinges, tower bolt, handles, multipurpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer before use on work.

Providing wall paneling butting to the wall and ceiling with new wall paneling in all floors using Country wood scantlings of size 100 X 50mm for forming of grid of size 0.60m X 0.60m. Country wood runners as stiffness using 50mm X 50mm for required length spaced at 0.2m intervals on both direction and fixing to the exiting wall portion and ceiling. Over the frame 12mm thick anti terminate water proofing ply wood using nails etc., and adhesive pasting the 4mm thick veneer ply with grooves using fevicol, nails. The rates inclusive of labour for wrought and put up and two coat of best varnishing, neat finishing, fixing in position etc., and complete complying with standard specification and as directed by the Departmental officers.

Supplying and fixing the 5 star rated (Carrier/ Voltas /"O" General or equivalent) Split A/C machines of 2.00 tons capacity of ISI make with Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer with time delay relay, Supply and fixing of MS stand for fixing outdoor unit, Supply and fixing of 3m length water drain pipe line (1” PVC Pipe) and all other necessary accessories as instructed by the Departmental officers etc complete as per standard specifications PWD SOR VOL I - M1985 + M1989

Supply and fixing of LED 4000K 2 X 2 square type Recessed fitting (Phillips / Havells / equivalent) etc, complete as per standard specifications. PWD SOR VOL VOL I M1287

Supply and fixing of 18W LED 3000K round type Recessed fitting (Phillips / Havells / equivalent) etc, complete as per standard specifications. PWD SOR VOL VOL I M1288

Supply and fixing of 18W LED 3000K Round type Recessed fitting (Phillips / Havells / equivalent) etc, complete as per standard specifications. PWD SOR VOL VOL I M1289

Minimast (12 Metre) with 6 Nos. 150W LED Fitting PWD SOR 2024-25 - Vol 1 - M-2137

supply and fixing of 150W LED street light fitting with LED (Lower end) with 40mm dia. GI pipe (class B) with 1 no.40 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting . SD453

Manufacturing, Supply and delivery of table size 2400mm X 1200mm X 750mm, using 18mm thick Antitermite water proof ply and top of table should be covered with laminated partice board, with drawers and cabinets with necessary accessories and two coats best varnish on the inside of the table and the sides of plywood should be lipping with teak wood beading and with two coats of varnish etc., complete. All the materials to be used should got approved by the departmental officers before use on work. The rate includes cost of materials labour charges, conveyance, neat finishing, fixing etc., complete complying with standard specification and as directed by the departmental officer.

Manufacturing, Supply and delivery of table size 1800mm X 900mm X 750mm, using 18mm thick Antitermite water proof ply and top of table should be covered with laminated partice board, with drawers and cabinets with necessary accessories and two coats best varnish on the inside of the table and the sides of plywood should be lipping with teak wood beading and with two coats of varnish etc., complete. All the materials to be used should got approved by the departmental officers before use on work. The rate includes cost of materials labour charges, conveyance, neat finishing, fixing etc., complete complying with standard specification and as directed by the departmental officer.

Manufacturing, Supply and delivery of table size 1500mm X 750mm X 750mm, using 18mm thick Antitermite water proof ply and top of table should be covered with laminated partice board, with drawers and cabinets with necessary accessories and two coats best varnish on the inside of the table and the sides of plywood should be lipping with teak wood beading and with two coats of varnish etc., complete. All the materials to be used should got approved by the departmental officers before use on work. The rate includes cost of materials labour charges, conveyance, neat finishing, fixing etc., complete complying with standard specification and as directed by the departmental officer.

Providing L - Shape work station Officer's table of size 1200mm X 600mm X 750mm using 18mm thick Antitermite water proof ply and top of table should be covered with laminated partice board, with drawers and cabinets with necessary accessories and two coats best varnish on the inside of the table and the sides of plywood should be lipping with teak wood beading and with two coats of varnish etc., complete. All the materials to be used should got approved by the departmental officers before use on work. The rate includes cost of materials labour charges, conveyance, neat finishing, fixing etc., complete complying with standard specification and as directed by the departmental officer.

Manufacturing, Supply and delivery of Computer table size 2400mm X 525mm X 750mm, using 18mm thick Antitermite water proof ply and top of table should be covered with laminated partice board. The keyboard tray shall be of size 710mm (front width) X 300mm (depth) approximately is to be provided with end fittings made from minimum 2mm thick MS steel mounted on either side and the keyboard tray shall be easily slideable, provided with two telescopic channels with balls. The size of the open area for CPU should be 200 mm (W) x 400 mm (D) x 500 mm (H).The Cost shall incluidng drawers and cabinets with necessary accessories and two coats best varnish on the inside of the table and the sides of plywood should be lipping with teak wood beading and with two coats of varnish etc., complete. All the materials to be used should got approved by the departmental officers before use on work. The rate includes cost of materials labour charges, conveyance, neat finishing, fixing etc., complete complying with standard specification and as directed by the departmental officer.

Manufacturing, Supply and delivery of table size 1500mm X 750mm X 750mm, using 18mm thick Antitermite water proof ply and top of table should be covered with laminated partice board, without drawers and cabinets but including necessary accessories and two coats best varnish on the inside of the table and the sides of plywood should be lipping with teak wood beading and with two coats of varnish etc., complete. All the materials to be used should got approved by the departmental officers before use on work. The rate includes cost of materials labour charges, conveyance, neat finishing, fixing etc., complete complying with standard specification and as directed by the departmental officer.

Manufacture and supply of council hall chairs with using superior quality Nigerian teak wood, hand crafted by skilled artificiants with premium finishing. Seat & back is made up of the luxurious high density foam covered with jute textured premium cotton cloth and the colour and quality as directed. All the materials to be used should got approved by the departmental officers before use on work. The rate includes cost of materials labour charges, conveyance, neat finishing, fixing etc., complete complying with standard specification and as directed by the departmental officer.

Manufacture and supply of Council hall chair for Chiarperson with using superior quality Nigerian teak wood, hand crafted by skilled artificiants with premium finishing as a king. Seat & back is made up of the luxurious high density foam covered with jute textured premium cotton cloth and the colour and quality as directed. All the materials to be used should got approved by the departmental officers before use on work. The rate includes cost of materials labour charges, conveyance, neat finishing, fixing etc., complete complying with standard specification and as directed by the departmental officer.

Manufacture and supply of chair for Grade I officers use with revolving type using superior quality Nigerian teak wood, with premium finishing . Seat & back is made up of the luxurious high density foam covered with jute textured premium cotton cloth and the colour and quality as directed. All the materials to be used should got approved by the departmental officers before use on work. The rate includes cost of materials labour charges, conveyance, neat finishing, fixing etc., complete complying with standard specification and as directed by the departmental officer.

Manufacture and supply of chair for Grade II officers rank use with revolving type using superior quality teak wood with premium finishing . Seat & back is made up of the luxurious high density foam covered with jute textured premium cotton cloth and the colour and quality as directed. All the materials to be used should got approved by the departmental officers before use on work. The rate includes cost of materials labour charges, conveyance, neat finishing, fixing etc., complete complying with standard specification and as directed by the departmental officer.

Manufacture and supply of S- Type ordinary chair for office use with MS pipes normal finishing . Seat & back is made up of the PVC wire mesh and the colour and quality as directed. All the materials to be used should got approved by the departmental officers before use on work. The rate includes cost of materials labour charges, conveyance, neat finishing, fixing etc., complete complying with standard specification and as directed by the departmental officer.

Manufacture and supply of Three seater leather type sofa set of size length-30 inch length X 30 inch width X 30 inch height. approximately using superior quality teak wood with premium finishing . Seat & back is made up of the luxurious high density foam covered with jute textured premium cotton cloth and the colour and quality as directed. All the materials to be used should got approved by the departmental officers before use on work. The rate includes cost of materials labour charges, conveyance, neat finishing, fixing etc., complete complying with standard specification and as directed by the departmental officer.

Manufacturing, Supply and delivery of MIC stand of required size as directed by the engineer in charge, using 18mm thick Antitermite water proof ply and top of table should be covered with laminated partice board, with drawers and cabinets with necessary accessories and two coats best varnish on the inside of the table and the sides of plywood should be lipping with teak wood beading and with two coats of varnish etc., complete. All the materials to be used should got approved by the departmental officers before use on work. The rate includes cost of materials labour charges, conveyance, neat finishing, fixing etc., complete complying with standard specification and as directed by the departmental officer.

CONFERENCE TYPE PUBLIC ADDRESS SYSTEM, PROJECTOR AND MOTORIZED SCREEN

Chairman Uit PWD SOR 2024-2024- Vol 1 - M-2146

Delegate Unit PWD SOR 2024-2024- Vol 1 - M-2147

Conference Controller PWD SOR 2024-2024- Vol 1 - M-2148

PA Mixer Amplifier 240W PWD SOR 2024-2024- Vol 1 - M-2150

Wall Speaker 30W PWD SOR 2024-2024- Vol 1 - M-2153

Cordless Mic UHF PWD SOR 2024-2024- Vol 1 - M-2156

8 Pin Conference Mic Socket with Modular Box and Front Plate PWD SOR 2024-2024- Vol 1 - M-2157

2 Core 1.5 sq.mm Shielded Copper Speaker Wire PWD SOR 2024-2024- Vol 1 - M-2158

8 Core 1.5 sq.mm PVC Copper Conference Ccable PWD SOR 2024-2024- Vol 1 - M-2159

3200 Ansi Lumens Projector, XGA (1024X 768 ) Resolution, Contrast Ratio: 4000:1 PWD SOR 2024-2024- Vol 1 - M-2160

6' x 4' Motorized Screen PWD SOR 2024-2024- Vol 1 - M-2163

3 Feet Ceiling Mount Kit PWD SOR 2024-2024- Vol 1 - M-2166

20 Metre HDMI Cable PWD SOR 2024-2024- Vol 1 - M-2167

3 Core 1.5 sq.mm. PVC Power Cable for Projector PWD SOR 2024-2024- Vol 1 - M-2168

Supply, Installation and Commissioning of 250 Liter capacity Reverse Osmasis System with following specifications including all cost of labour, materials trans portation etc., Complete PWD SOR 2024-2024- Vol 1 - M-0721

Supply errection and Commissioning of 40 KW Genset, diesel Capacity 50 Liter of ISI Make including cost of concrete bed and all other cost of Conveyence etc., as per PWD SOR 2024-2024- Vol 1 - M-2346

Providing Rain Water Harvesting using 6 No.of RCC well rings of 90cm inner dia (clear) with 5cm wall thickness made out of cement concrete 1:2:4 using 20mm hard broken jelly to a height of 30cm each supplying and fabricating 16 No. of 6mm dia MS rod vertically and 3 No. of 6mm dia MS rod circumferentially tied together with 18 guage binding wire for well rings including necessary earth work excavation 1m dia to a depth of 1m, supplying and filling 40mm HBG inside the erected well ring to a depth of 90cm, and top covered with RCC circular perforated cover slab of 1m dia and 5cm thick which inclusive of cost and fabrication of 6mm M.S reinforcement at 15 cm spacings on both directions and one 6mm M.S rod ties at the edge of the slab circumferentially including cost of moulding, curing, finishing and well placing in position and disposing off excavated earth with all initial leads and lifts in places as shown by the Departmental officers etc., complete in all respects.

Supply & Installing of 3 Phase UPS Unit, 3 PHASE UPS (Three Phase In & Single Phase out), CAPACITY - SYSTEM WITH BATTERY - 2 HOURS BACK-UP - 15 KVA PWD SOR VOL I M-2115

Passenger Lift with M/C room, Speed 1.5 m/s with Stainless Steel Panels, Disable friendly, microprocessor based controller, VVVF drive, Fire rated doors and ARD - 10 Passenger PWD SOR VOL I M-2366

Manufacturing, supplying and fixing in position plain cement concrete precast kerb slab of size 600mm x 600mm x 100mm in Cement Concrete 1:1.5:3 (One cement, Two M - sand and Four jelly) using 20mm HBG stone jelly including cost of moulding charges, casting of slab, finishing, curing, fixing and pointing the slab with CM 1:3 (One Cement and Three Sand) to full depth of slab etc., complete complying with standard specification and as directed

sakthi constructions (BID ID -1415210)