Welcome maintenance of Officers Md Accn and other certain repairs at New Mil Stn Kapurthala under GE Kapurthala

Amount

M&L for complete removal of existing treatment on wall, roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed by Engr-in-Charge.

M&L for complete removal of existing treatment and scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including cleaning of any mortar drops, fungus efflorescent salts etc on ceiling complete all as specified and directed by Engr-in-Charge.

M&L for waterproof cement based putty @ 1 Kg (undiluted) per sq mtr. of thickness 2 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc, complete all as specified and directed by Engr-in-Charge by skilled labour as per following steps:- Step 1):- Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2):- Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. Step 3):- Allow 6-8 hrs time to dry the putty surface. Note:- For Application refer item No 05.

M&L for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note : Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paint application, complete all as specified and directed by Engr-in-Charge.

M&L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted) /10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed by Engr-in-Charge. Notes:- Applicable for Ser item No 01 to 05 (a) The work pertaining to periodical services & Water Proofing shall be executed by authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by GE. (b) Cost of scaffolding upto 10m height of building shall be included in the quoted rates.

M&L for Preparation of old decorated surfaces of walls and cornics by complete removeal of existing treatment by applying water and scrapping of entire thickness of exsting treatment and applying 3mm wall care putty to achieve smooth finish complete all as specified and directed by Engr-in-Charge.

M&L for applying two coat of Oil bound distemper complete all as specified and directed by Engr-in-Charge. Note:- OBD to be done by Roller

M&L for applying one coat of Oil bound distemper complete all as specified and directed by Engr-in-Charge. Note:- OBD to be done by Roller

M&L for Preparation of old decorated surfaces of walls or cornics by complete removeal of existing treatment by applying water and scrapping of entire thickness of exsting treatment with using steel scraper and thereafter applying two coat of exterior emuslion paint/weather proof coat complete all as specified and directed by Engr-in-Charge. Note:- Exterior emulsion paint to be done by Roller.

Taking down cement plaster on brick or stone wall etc incl raking out joints, hacking for key scrubbing down with water etc, complete all as specified and directed by Engr-in-Charge.

M&L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for 5mm thick rendering in CM 1:3 on brick work or concrete surfaces finished even and smooth without using extra cement in Ceiling etc complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound distermper over a coat 3mm thick birla white putty complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of walls and applying one coat of Birla white putty 2mm Thick to obtain the true line to achieve smooth surface and applying two coats of oil bound distermper complete all as specified and directed by Engr-in-Charge. Note:- OBD to be done by Roller.

M&L for Preparation of plastered or unplastered surfaces of walls or cornics by complete removeal of existing treatment by applying water and scrapping of entire thickness of exsting treatment with using steel scraper and thereafter applying two coat of exterior emuslion paint/weather proof coat complete all as specified and directed by Engr-in-Charge. Note:- Exterior emulsion paint to be done by Roller.

M&L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old steel surfaces of any description over 10cm girth or widhth no otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge.

Dismantling floor hearth or wall tilling including cement mortar bedding (but not backaing coat) removing serviceable tiles to store & rubbish off the premises complete all as specified and directed by Engr-in-Charge.

M&L for glazed ceramic coloured tiles in vertical surfaces 450X350X 7mm thick over 10 mm thick rendering in CM (1:4) as in vertical surfaces such as in dado/skirting including set and jointed neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed by Engr-in-Charge.

M&L Vitrified Ceramic tiles 8-9 mm thick (square/ rectangular), dark shade, polished, area of each tile exceeding 0.42 sqm but not exceeding 1.00 Sqm, in floors/skirting etc set & jointed in neat cement slurry & pointed in white or coloured cement to match. incl 15mm thick screed bed/bedding layers in cm 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.38 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement screed bed in CM (1:6), complete all as specified and directed by Engr-in-Charge.

M&L for granite 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including 15 mm thick bedding layer in CM 1:6, complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing 15mm bore & connection including cleaning for refixing or removal to store complete all as specified and directed by Engr-in-Charge.

S&F 15mm bore GI water tubing medium grade fixed complete to wall or ceiling as specified & directed complete all as specified and directed by Engr-in-Charge.

Taking up or down steel tubing 20 mm bore & connection including cleaning for refixing or removal to store as complete all as specified and directed by Engr-in-Charge.

S&F 20 mm bore GI water tubing medium grade fixed complete to wall or ceiling as complete all as specified and directed by Engr-in-Charge.

Cutting chases pinning in brick/stone/blocks masonary in making good to facings where required and pointing in CM (1:3) to ends or eges of steps, cills, sun shades, shelves, lintel etc and cutting chases for concealed water tubing or etc and making good, complete all as specified and directed by Engr-in-Charge.

S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed by Engr-in-Charge.

S&F 20mm dia aluminium chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm bore CP bib taps (long body) fancy type cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed, complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm, complete all as specified and directed by Engr-in-Charge.

S&F in repairs 15mm dia stop/angle valve, CP cast copper alloy with crutch or butterfly handle. Screwed down high pressure, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs for vitreous china ware wash hand basin with pedestal type (color as specified and directed), flat back size 550 X 400mm including 15mm dia pillar tap swan neck) chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete all as specified and directed by Engr-in-Charge.

S&F in repairs brass CP mixture valve Centre hole, cast copper alloy fancy type chromium plated for mixing hot and cold water screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia as per, complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china squatting pan wash down water closet of size 580x440 mm, white, complete fixed in repairs with P or S trap, PVC flushing cistern low level of Make 10 ltrs capacity including brackets for flush tank, PVC flush pipe and all necessary fittings etc complete all as specified and directed by Engr-in-Charge.

S&F in repairs S&F sinks with drainage board (double bowl) made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm.) complete all as specified and directed by Engr-in-Charge.

S&F in repairs Brass CP wall mixer with L bend for connection to overhead shower for mixing hot & cold water screwed down for iron pipe and fixed of 15mm bore complete all as specified and directed by Engr-in-Charge.

S&F in repairs 125mm over head shower of chromium plated any colour or fixing with 15mm pipe with 225mm, SS Arm and flange complete all as specified and directed by Engr-in-Charge.

S&F in repairs Chromium plated, Brass, Jet spray including flexible pipe 15mm bore, screwed down, high-pressure pipe of 15 mm bore with wall flange fixed to wash down water closet (pedestal pattern) complete all as specified and directed by Engr-in-Charge.

S&F in repairs stainless steel plate rack ( Utensil rack) of size 900mmx1200mm and depth 300mm made with 0.63mm thick stainless sheet fixed with brass screw including necessary fittings complete all as specified and directed by Engr-in-Charge.

S&F in repairs vitreous china European type wash down water closet pan (single piece including built in flushing cistern) colour (as specified and directed) including seat cover (with MS or CP hinging device) and fixing bolts, P or S trap, necessary inlet and outlet connections complete all as specified and directed by Engr-in-Charge.

S&F in repairs Toilet paper holder of CP fixed to walls with chromium plated (CP) brass screws complete all as specified and directed by Engr-in-Charge.

S&F in repairs towel rack of CP fixed to walls with chromium plated (CP) brass screwscomplete all as specified and directed by Engr-in-Charge.

S&F in repair 20mm dia gunmetal gate valves with iron wheel screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs health faucet with 15 mm with 1.00 mtr CP flexible pipe complete all as specified and directed by Engr-in-Charge.

S&F in repairs corner glass shelf of size 300mm dia 8mm thick with chromium plated bracket complete all as specified and directed by Engr-in-Charge.

S&F Harrison rails, mild steel, chromium plated of anodised aluminium alloy with fixing brackets, stops, rollers etc complete all as specified and directed by Engr-in-Charge.

Dismantling of cast iron pipes jointed in cement mortar and taking out from trenches/ wall 100 / 75 mm bore (sand cast) incl bends Y/T, complete all as specified and directed by Engr-in-Charge.

S&F 75mm PVC(SWR) pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed by Engr-in-Charge.

S&F 75mm PVC(SWR) bends complete all as specified and directed by Engr-in-Charge.

S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls complete all as specified and directed by Engr-in-Charge.

S&F 110mm PVC (SWR) bends with access door complete all as specified and directed by Engr-in-Charge.

S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed by Engr-in-Charge.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed by Engr-in-Charge.

M&L for hacking out old broken glass (any thickness size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones exceeding 0.5 Sqm, complete all as specified and directed by Engr-in-Charge.

M&L for Acrylic glass sheet plain 3mm thick ordinary quality and glazing with oil putty in square not.exc 0.5 Sqm in each pane complete all as specified and directed by Engr-in-Charge.

M&L for sheet glass frosted 3mm thick ordinary quality and glazing with oil putty in square not.exc 0.5 Sqm in each pane complete all as specified and directed by Engr-in-Charge.

Taking down Chowkats or frames not exceeding 1.5 Sqm each (Without taking off shutters from the frame) complete all as specified and directed by Engr-in-Charge.

Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4.00 Sqm each (Without taking off shutters from the frame) complete all as specified and directed by Engr-in-Charge.

S&F Factory made single 30 mm thick extruded WPC (Wood Polymer Composite) solid moulded flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed by Engr-in-Charge. Note:- stainless steel butt hinges and necessary S S screws incl in this item.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm (± 5 mm tolerence in dimension) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners incl in this item of required dia and length complete all as specified and directed by Engr-in-Charge.

S&F 35 mm thick Factory Made 100% Solid WPC ( Wood polymer Composite ) Glazed and skeleton Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), alcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured and an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws as per required, complete all as specified and directed by Engr-in-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company. Note:- Stainless steel, butt hinges,luminum Jali and Stainless wiremess and necessary S S screws incl in this item.

S&F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners incl in this item). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed by Engr-in-Charge.

M&L for 18-19 mm thick Prelaminated particle board, grade -2 quality interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work for cuboard shutter complete all as specified and directed by Engr-in-Charge.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, in opening as per specification and drawing complete all as specified and directed by Engr-in-Charge.

S&F factory made 2nd class hard wood Plain, framed, panelled shutters 35 mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge.

S&F factory made 2nd class, hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to received glass, gauge, etc ( without sash bars) edges of framing plain, chambered or rounded, fitted with cut and mitred beads for securing glass , etc but difided into squares with plain chamfered or rounded mirted and rebated sash bars any numbers sizes of members of shutters complete all as specified and directed by Engr-in-Charge.

S&F pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x 60mm filling hollow frame with PCC (1:3:6) complete all as specified and directed by Engr-in-Charge.

S&F framed work Fe 410-W(Gde-E-250)Quality-A as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering doors etc. to be prepared for hanging or sliding with and incl hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engr-in-Charge.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles end plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded seat to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement and fixed in the frame at site as per specification and drawing complete all as specified and directed by Engr-in-Charge in SSR Part II.

S & F steel window 1.25mm thick Box type ( primer coated) ERW hollow P-section of size 60mm x 25mm single rebated comprises glazed Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:2:4) type B-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf complete all as specified and directed and shown on drawings. Note: (i) Glass shall be measured and paid separately under appropriate item of Sch 'A' (ii) Irrespective of whatever shown on drgs, & measured and paid separately under appropriate item complete all as specified and directed

S&F steel window 1.25mm thick Box type ( primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises gauged Skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T- Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T- Section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC ( 1:3:6) type C-1 Four Nos for each window) including following fitting welded to frame shutter: (a) Mild Steel Hold Fast,150mm long of 12mm Square bar made to shape – 04 Nos per window (b) Handles of Z Sec 20mm x 100mm long (c) stopper – 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mmx63mm welded to hinges – 01 No per leaf (e) Mild steel Pintal hinges of size 75mmx75mmx12mm-02 Nos per leaf. Note: wire mesh shall be measured and paid separately under appropriate item complete all as specified and directed by Engr-in-Charge.

S&F framed work such as grills, grating, etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work or water tanks and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and directed by Engr-in-Charge.

S&F anodised aluminium frame powder coated for doors & windows with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engr-in-Charge.

S&F anodised aluminium windows and ventilators powder coated with frames & shutters with one or more rebates including joining cleats, glazing clips, rubber padding, anodised aluminium snap beading screws etc and necessary aluminium iron mongary for fixing etc complete all as specified and directed by Engr-in-Charge.

S&F 4.00 mm thick Plain sheet glass, one side sheet glass is groundor obscured or frosted in squares exc 0.5 sqm each pane and glazing with metal beads, complete all as specified and directed by Engr-in-Charge.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed by Engr-in-Charge.

S&F 200 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-Charge.

S&F alumunium hinges for PVC door shutter, size of hinges in 100mm complete all as specified and directed by Engr-in-Charge.

S&F Aluminium handles, cast type, anodised of size 150 mm complete all as specified and directed by Engr-in-Charge.

S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.

S&F in repairs 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engr-in-Charge.

M&L for metal Welding Exc 6 mm but n exc 9mm in repairs n. exc 2.5cm in length complete all as specified and directed by Engr-in-Charge.

M&L Preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer complete all as specified and directed by Engr-in-Charge.

S&F in repairs for PVC flushing cistern valve less, syphonic action type low level, ball valve, float and handle with bracket fixed in repair of 10 ltrs capacity complete all as specified and directed by Engr-in-Charge.

S&F in repair 500 litres capacity Rotational moulded polyethylene water storage tanks triple layered (Cylindrical vertical with closed top) hoisted and fixed in position including complete all as specified in SSR Part I including dismantaling of existing tank and removing to store complete all as specified and directed by Engr-in-Charge.

S&F in repairs 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed in repair complete all as specified and directed by Engr-in-Charge.

M&L PVC floor trap 75 mm dia outlet fixed with grating including jointing to waste pipe in run lead complete all as specified and directed by Engr-in-Charge.

S&F in repairs Brass chromium plated bottle traps of 32 mm dia for wash basins with inlet and outlet screwd fro pipe or connectins including necessary packing, union and cap and fixed complete all as specified and directed by Engr-in-Charge.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed by Engr-in-Charge.

S&F 6mm thick cover fillet for 18/19mm wide block board of 2nd class hardwork complete all as specified and directed by Engr-in-Charge.

Harbhajan electric co

kaushal builders