MISC/REPAIR INCLUDING PAINTING STEEL FURNITURE OF OTM, OFFICERS AND 10 AFH OF 16 WING AF AND MAINT/REPAIR INCLUDING POLISHING TO WOODEN FURNITURE OF MARRIED ACCN (OMQ/SMQ/NCE/SINGLE MARRIED ACCN) OF 16 WING AF UNDER GE (AF) HASIMARA

Amount

WOODEN FURNITURE Replacement of top of side board with 18/19mm thick pre laminated particle board one side teak faced with 6mm thick teak wood edging all-round as per drawing and including taking out old topas, complete all as specified and directed. (Drg No. FD-26M)

Replacement of door shutter of side board with 18/19 mm thick one side teak faced pre-laminated particle board including one number of CP knob (40 x 40 mm) fixed to each shutter with 6mm thick teak wood beading all as per drawing and including taking out old shutter, complete all as specified and directed. (Drg No. FD-26M)

Replacement of drawer of side board including one number of CP knob of size 40 x 40 mm fixed to each drawer complete as per drawing including taking out old drawer, complete all as specified and directed. (Drg No. FD-26M)

Replacement of back side of side board with 6 mm thick commercial ply wood as per drawing and including taking out back side of side board, complete all as specified and directed. (Drg No. FD-26M)

M & L for replacement of seat of chair wooden bottom, made out of 6mm thick commercial plywood, BWR grade, (perforated in the centre) fixed with 12 Nos screws of suitable size, all as per drawing including taking out old seat, complete all as specified and directed. (Drg No. FD-225 & 285)

M & L for replacement of damaged front legs of chair wooden bottom with new leg of required size and shape, made out of well seasoned teak wood, all as per drawing including dismantling of old leg, complete all as specified and directed. (Drg No. FD-225 & 286)

All as per item No. 06 above but rear legs, complete all as specified and directed. (Drg No. FD-225 & 287)

All as per item No. 06 above but back rest, complete all as specified and directed. (Drg No. FD-225 & 288)

All as per item No. 06 above but side rail, complete all as specified and directed. (Drg No. FD-225 & 285)

All as per item No. 06 above but front rail, complete all as specified and directed. (Drg No. FD-225 & 286)

All as per item No. 06 above but back rail, complete all as specified and directed. (Drg No. FD-225 & 287)

All as per item No. 06 above but stiffener, complete all as specified and directed. (Drg No. FD-225 & 288)

M & L for replacement of damaged front legs of chair easy with well seasoned teakwood, all as per drawing including taking out old leg, complete all as specified and directed. (Drg No. FD-229)

All as per item No. 13 above but rear legs, complete all as specified and directed. (Drg No. FD-229)

All as per item No. 13 above but arm rest of chair easy, complete all as specified and directed. (Drg No. FD-229)

All as per item No. 13 above but fillet for canning, complete all as specified and directed. (Drg No. FD-229)

All as per item No. 13 above but rail of seat and back, complete all as specified and directed. (Drg No. FD-229)

M & L for replacement of damaged front leg of chair dining with well seasoned 1st class teak wood, all as per drawing including taking out old leg, complete all as specified and directed. (Drg No. FD-279)

All as per item No. 18 above but rear leg, complete all as specified and directed. (Drg No. FD-279)

All as per item No. 18 above but back rest, complete all as specified and directed. (Drg No. FD-279)

All as per item No. 18 above but stiffener, complete all as specified and directed. (Drg No. FD-279)

All as per item No. 18 above but side rail, complete all as specified and directed. (Drg No. FD-279)

All as per item No. 18 above but front rail, complete all as specified and directed. (Drg No. FD-279)

All as per item No. 18 above but back rail, complete all as specified and directed. (Drg No. FD-279)

All as per item No. 18 above but fillet, complete all as specified and directed. (Drg No. FD-279)

M & L for replacement of damaged front legs of Chair writing made out of well seasoned 1st class teak wood, all as per drawing including taking out old leg, complete all as specified and directed. (Drg No. FD-280)

All as per item No. 26 above but rear leg, complete all as specified and directed. (Drg No. FD-280)

All as per item No. 26 above but back rest, complete all as specified and directed. (Drg No. FD-280)

All as per item No. 26 above but side rail, complete all as specified and directed. (Drg No. FD-280)

All as per item No. 26 above but stiffener, complete all as specified and directed. (Drg No. FD-280)

All as per item No. 26 above but fillet for canning, complete all as specified and directed. (Drg No. FD-280)

M & L for replacement of damaged legs of stool dressing with well seasoned 1st class teakwood, all as per drawing including taking out old leg, complete all as specified and directed. (Drg No. FD-382)

M & L for replacement of damaged front rail of stool dressing with well seasoned 1st class Teakwood, all as per drawing including taking out old front rail, complete all as specified and directed. (Drg No. FD-382)

M & L for replacement of damaged side rail of stool dressing with well seasoned 1st class Teakwood, all as per drawing including taking out old side rail, complete all as specified and directed. (Drg No. FD-382)

M & L for replacement of table top with 18/19mm thick pre laminated particle board one side teak faced (exterior grade) with 4mm thick teak wood edging all round, all as per drawing and as specified and directed. (Drg No. FD- 41, 42, 231, 224, 234, 238 & 284)

Taking out broken legs of Table and supply and fixing new leg of required size made out of well seasoned 1st class teak wood, all as per drawing, complete all as specified and directed. (Drg No. FD- 41, 42, 231, 224, 234, 238 & 284)

Taking out broken front rail of Table and supply and fixing new front rail of required size made out of well seasoned 1st class teak wood, all as per drawing, complete all as specified and directed. (Drg No. FD- 41, 42, 231, 224, 234, 238 & 284)

Taking out broken side rail of Table and supply and fixing new side rail of required size made out of well seasoned 1st class teak wood, all as per drawing, complete all as specified and directed. (Drg No. FD- 41, 42, 231, 224, 234, 238 & 284)

Taking out broken stiffener of Table and supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood, all as per drawing, complete all as specified and directed. (Drg No. FD- 41, 42, 231, 224, 234, 238 & 284)

Replacement of drawer of table including one number of CP knob of size 40 x 40 mm fixed to each drawer complete as per drawing including taking out old drawer, complete all as specified and directed. (Drg No. FD- 41, 42, 231, 224, 234, 238 & 284)

M & L for replacement of table top with 18/19mm thick pre laminated particle board one side teak faced (exterior grade) with 4mm thick teak wood edging all round, all as per drawing, complete all as specified and directed. (Drg No. FD- 88 & 291)

Taking out broken legs of Table and supply and fixing new leg of required size made out of well seasoned 1st class teak wood, all as per drawing, complete all as specified and directed. (Drg No. FD- 88 & 291)

Taking out broken front rail of Table and supply and fixing new front and back rail of required size made out of well seasoned 1st class teak wood, all as per drawing, complete all as specified and directed. (Drg No. FD- 88 & 291)

Taking out broken Side rail of Table and supply and fixing new side rail of required size made out of well seasoned 1st class teak wood, all as per drawing, complete all as specified and directed. (Drg No. FD- 88 & 291)

Taking out broken stiffener of Table and supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood, all as per drawing, complete all as specified and directed. (Drg No. FD- 88 & 291)

M & L for replacement of table top with 18/19mm thick pre laminated particle board one side teak faced (exterior grade) with 4mm thick teak wood edging all round, all as per drawing, complete all as specified and directed. (Drg No. FD- 33, 249 & 275)

Taking out broken legs of Table and supply and fixing new leg of required size made out of well seasoned 1st class teak wood, all as per drawing, complete all as specified and directed. (Drg No. FD- 33, 249 & 275)

Taking out broken stiffener of Table and supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood, all as per drawing, complete all as specified and directed. (Drg No. FD- 33, 249 & 275)

M & L for replacement of shutter with 18/19mm thick pre laminated particle board one side teak faced (exterior grade) with 4mm thick teak wood edging all round including Knob and lock complete all as per drawing, complete all as specified and directed. (Drg No. FD- 33, 249 & 275)

Replacement of drawer of table writing including one no CP Knob as per sample fixed to each drawer complete as per drawing, complete all as specified and directed. (Drg No. FD- 33, 249 & 275)

M & L for replacement of back side of table writing with 6 mm thick one side teak faced plywood of verious size fixed to wooden frame as per existing and as per drawing, complete all as specified and directed. (Drg No. FD- 33, 249 & 275)

M & L for replacement of table top with 18/19mm thick pre laminated particle board one side teak faced (exterior grade) with 4mm thick teak wood edging all round, all as per drawing, complete all as specified and directed. (Drg No. FD- 274)

Taking out broken legs of table and supply and fixing new leg of required size made out of well seasoned 1st class teak wood, all as per drawing, complete all as specified and directed. (Drg No. FD- 274)

M & L for replacement of damaged front rail of table with well seasoned 1st class Teakwood, all as per drawing including taking out old front rail, complete all as specified and directed. (Drg No. FD- 274)

M & L for replacement of damaged side rail of table with well seasoned 1st class Teakwood, all as per drawing including taking out old side rail, complete all as specified and directed. (Drg No. FD- 274)

M & L for replacement of top of tea poy verandah made out of 18/19 mm thick pre laminated particle board one side teak faced (exterior grade) with 4 mm thick teak wood edging all round, all as per drawing including taking out old top, complete all as specified and directed. (Drg No. FD- 232 & 382)

Taking out broken legs of tea poy and supply and fixing new leg of required size made out of well seasoned 1st class teak wood, all as per drawing, complete all as specified and directed. (Drg No. FD- 232 & 382)

M & L for replacement of damaged front rail of tea poy with well seasoned 1st class Teakwood, all as per drawing including taking out old front rail, complete all as specified and directed. (Drg No. FD- 232 & 382)

M & L for replacement of damaged side rail of tea poy with well seasoned 1st class Teakwood, all as per drawing including taking out old side rail, complete all as specified and directed. (Drg No. FD- 232 & 382)

Taking out broken stiffener of tea poy and supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood, all as per drawing, complete all as specified and directed. (Drg No. FD- 232 & 382)

M & L for replacement of top of peg table with 18 / 19 mm thick pre-laminated particle board one side teak faced (exterior grade) with 4 mm thick teak wood edging all round, all as per drawing including taking out old top, complete all as specified and directed. (Drg No. FD- 277 & 384)

M & L for replacement of leg of peg table with new legs of required size made out of well seasoned 1st class teak wood, all as per drawing & including taking out of old broken legs, complete all as specified and directed. (Drg No. FD- 277 & 384)

M & L for replacement of damaged side / front rail of peg table with well seasoned 1st class teakwood, all as per drawing including taking out old side rail, complete all as specified and directed. (Drg No. FD- 277 & 384)

Taking out broken stiffener/bottom rail of peg table and supply and fixing new stiffener/bottom rail of required size made out of well seasoned 1st class teak wood, all as per drawing, complete all as specified and directed. (Drg No. FD- 277 & 384)

Taking down old unseviceable top from table dining and S&F new top of table dining 6 persons made out of exterior grade prelaminated MDF board 18mm thick, complete all as specified and directed. (Drg No. FD- 30, 273 & 376) Make : Green Panel Max of green ply Durotuff.

M & L for replacement of top of table dining 8 persons with 18 / 19mm thick pre-laminated particle board one side teak faced (exterior grade) with 4mm thick teak wood edging all-round, all as per drawing including taking out old top, complete all as specified and directed. (Drg No. FD- 30, 273 & 376)

M & L for replacement of damaged long rail of table dining 6 persons with well seasoned 1st class teakwood, all as per drawing including taking out old long rail, complete all as specified and directed. (Drg No. FD- 30, 273 & 376)

M & L for replacement of damaged long rail of table dining 8 persons with well seasoned 1st class teakwood, all as per drawing including taking out old long rail, complete all as specified and directed. (Drg No. FD- 30, 273 & 376)

M & L for replacement of damaged short rail of table dining 6/8 persons with well seasoned 1st class teakwood, all as per drawing including taking out old short rail, complete all as specified and directed. (Drg No. FD- 30, 273 & 376)

M & L for replacement of back of book case with 6 mm thick commercial ply wood BWR grade conforming to IS-303-1989 of ISI marked all other as per existing and as per drawing including taking out old back, complete all as specified and directed. (Drg No. FD- 45/DB)

M & L for replacement of top and bottom of book case with 18/19mm thick particle board commercial type, exterior grade conforming to IS-3087-1989 and ISI marked all other as per existing and as per drawing including taking out old top and bottom, complete all as specified and directed. (Drg No. FD- 45/DB)

M & L for replacement of shutter of book case with 18/19mm thick particle board commercial type, exterior grade conforming to IS-3087-1989 and ISI marked all other as per existing and as per drawing including taking out old top and bottom, complete all as specified and directed. (Drg No. FD- 45/DB)

M & L for replacement of top of bed ply wood with 12mm thick commercial plywood, BWR grade, fixed on top of bed plywood with screws all as shown on drawing including taking out old bed top, complete all as specified and directed. (Drg No. FD- 246)

M & L for replacement of leg of bed with new legs of required size made out of well seasoned 1st class teak wood, all as per drawing including taking out of old broken legs, complete all as specified and directed. (Drg No. FD- 246)

M & L for replacement of damaged long rail of bed with well seasoned 1st class Teakwood, all as per drawing including taking out old long rail, complete all as specified and directed. (Drg No. FD- 246)

Provision of short rail by converting from long rail obtained from item No.75 above including cutting and made to shape and size of short rail from existing broken / unserviceable long rail and fixing the same to bed after removing the damaged short rail all as shown on drg, complete all as specified and directed. (Drg No. FD- 246)

M & L for repair to head board of bed plywood top by replacing with 4mm thick one side teak faced plywood fixed to existing frame and edging with 4mm wide teak wood beading all as shown on drawing including taking out old head board, complete all as specified and directed. (Drg No. FD- 246)

All as per item No. 77 above but foot board of bed ply wood top all as per drawing, complete all as specified and directed. (Drg No. FD-246)

M & L for replacement of sliding glass shutter of size 300 x 290 x 5mm thick, ordinary quality, as per drawing including taking out old glass shutter, complete all as specified and directed. (Drg No. FD-32 & 233)

M & L for replacement of leg of table dressing new legs of required size made out of well seasoned 1st class teak wood, all as per drawing including taking out of old broken legs, complete all as specified and directed. (Drg No. FD-32 & 234)

M & L for replacement of bottom of table dressing with 18/19mm thick particle board commercial type, exterior grade conforming to IS-3087-1989 and ISI marked all other as per existing and as per drawing including taking out old bottom, complete all as specified and directed. (Drg No. FD-32 & 235)

M & L for replacement of side of table dressing with 18/19mm thick particle board commercial type, exterior grade conforming to IS-3087-1989 and ISI marked pested over 1 mm thick plastic laminated sheet teak veneer with approved adhesive all other as per existing and as per drawing including taking out old side, complete all as specified and directed. (Drg No. FD-32 & 236)

M & L for replacement of back of table dressing with 18/19mm thick particle board commercial type, exterior grade conforming to IS-3087-1989 and ISI marked all other as per existing and as per drawing including taking out old back, complete all as specified and directed. (Drg No. FD-32 & 237)

M & L for replacement of top of table dressing with 18/19mm thick particle board commercial type, exterior grade conforming to IS-3087-1989 and ISI marked pested over 1 mm thick plastic laminated sheet teak veneer with approved adhesive all other as per existing and as per drawing including taking out old top, complete all as specified and directed. (Drg No. FD-32 & 238)

M&L for replacement of shutter of locker bed side with 18/19 mm pre laminated particle board of one side teak face and other side balancing white including replacement of hinges as per exixting specification, complete all as specified and directed. (Drg No. FD-54 M)

M&L for replacement of back of locker bed side with 6 mm thick plywood, commercial type grade BWR all as shown on drawing, complete all as specified and directed. (Drg No. FD-54 M)

M& L for replacement of leg of locker bed side with well seasoned first class teak wood all as shown on drawing, complete all as specified and directed. (Drg No. FD-54 M)

M&L for replacement/repair of aluminium D type handle 100 mm long ISI marked, complete all as specified and directed. (Drg No. FD-54 M)

M&L for replacement of 75mm size hasp and staple ,safety type ,aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified and directed. (Drg No. FD-54 M)

Supply of foam cushion of size 530mm X 500mm X 100mm thick (32 grade high density cool foam) covered with tapesty cloth (not less than Rs.225/- per mtr cost of cloth) including stitching, complete all as specified and directed. (Drg No. FD-281/373) (Make : Sleepwell / Kurlon or equivalent)

M & L for replacement of damaged front legs of Sofa set with well seasoned Teakwood, all as per drawing including taking out old leg, complete all as specified and directed. (Drg No. FD-281/373)

M & L for replacement of damaged rear legs of Sofa set with well seasoned Teakwood, all as per drawing including taking out old leg, complete all as specified and directed. (Drg No. FD-281/373)

M & L for replacement of damaged arm-rest of Sofa set with well seasoned 1st class Teakwood, all as per drawing including taking out old arm - rest, complete all as specified and directed. (Drg No. FD-281/373)

M & L for replacement of damaged front and back rail of seat and back of Sofa set with well seasoned 1st class teakwood, all as per drawing including taking out old rail, complete all as specified and directed. (Drg No. FD-281/373)

M & L for replacement of damaged side rail of seat and back of Sofa set with well seasoned 1st class teakwood, all as per drawing including taking out old rail, complete all as specified and directed. (Drg No. FD-281/373)

Taking out broken stiffener of sofa set seat and back and supply and fixing new stiffener of required size made out of well seasoned 1st class teak wood, all as per drawing, complete all as specified and directed. (Drg No. FD-281/373)

Taking down old worn out plastic cane from chair dining/chair writing/chair easy/Stool dressing and reweaving the same with new approved quality plastic cane 3mm wide half round, white, with bordering of 4mm wide half round white plastic cane, canning shall be done with godrej pattern, complete all as specified and directed. (Drg No. FD/DB) (Make AJAY/ PREMIER)

M & L for replacement of seat foam cushion, coir fiber covered with tapesty cloth duly stiched of approved colour as per sample, complete all as specified and directed. (Drg No. FD/MAP/06)

Removing of existing unseviceable top of table bed side and S&F new top made out of prelaminated particle board 18mm thick ISI marked exterior grade including 4mm thick teak wood beading all around the edges all as per drg, complete all as specified and directed. (Drg No. FD-276 & 248)

All as per item No. 100 above but side made out of prelaminated particle board 18mm thick, complete all as specified and directed. (Drg No. FD-276 & 248)

All as per item No. 100 above but back made out of 6mm ply wood, complete all as specified and directed. (Drg No. FD-276 & 248)

All as per item No. 100 above but shelf made out of prelaminated particle board 18/12mm. ISI marked, complete all as specified and directed. (Drg No. FD-276 & 248)

M&L for preparation of surfaces by removing of old existing fade out polish from following wooden furniture by scrapping or with caustic soda and rubbed down by emery paper including filled up the cracks and pores with a paste and putty and applying two coats of french polish of approved quality/PFU with high gloss finish on exposed surfaces to view for chair wooden bottom , complete all as specified and directed. (Drg No. FD-225/285)

All as per item No. 104 above but chair easy, complete all as specified and directed. (Drg No. FD-17/229)

All as per item No. 104 above but chair dinning, complete all as specified and directed. (Drg No. FD-228/278)

All as per item No. 104 above but chair writing/chair CB office, complete all as specified and directed. (Drg No. FD-20/250)

All as per item No. 104 above but stool dressing , complete all as specified and directed. (Drg No. FD-27/282)

All as per item No. 104 above but table 3’ x 2’ with drawer , complete all as specified and directed. (Drg No. FD-55/54, 41/42)

All as per item No. 104 above but table 3’ x 2’ without drawer , complete all as specified and directed. (Drg No. FD-55/54, 41/43)

All as per item No. 104 above but table 3’ x 3’, complete all as specified and directed. (Drg No. FD-88/291)

All as per item No. 104 above but table writing, complete all as specified and directed. (Drg No. FD-33/275)

All as per item No. 104 above but table centre, complete all as specified and directed. (Drg No. FD-29/274)

All as per item No. 104 above but teapoy, complete all as specified and directed. (Drg No. FD-34/232)

All as per item No. 104 above but peg table, complete all as specified and directed. (Drg No. FD-25/277)

All as per item No. 104 above but table dining 6 pers, complete all as specified and directed. (Drg No. FD-30/273)

All as per item No. 104 above but table dining 8 pers, complete all as specified and directed. (Drg No. FD-30/273)

All as per item No. 104 above but table dressing ladies, complete all as specified and directed. (Drg No. FD-32/251)

All as per item No. 104 above but book case, complete all as specified and directed. (Drg No. FD-237)

All as per item No. 104 above but sofa set 5 seated, complete all as specified and directed. (Drg No. FD-281)

All as per item No. 104 above but sofa set 4 seated, complete all as specified and directed. (Drg No. FD-281)

All as per item No. 104 above but bed ply wood top/hard bed, complete all as specified and directed. (Drg No. FD-246)

All as per item No. 104 above but table bed side, complete all as specified and directed. (Drg No. FD-28)

All as per item No. 104 above but locker bed side, complete all as specified and directed. (Drg No. FD-54)

All as per item No. 104 above but side board, complete all as specified and directed. (Drg No. FD-26)

All as per item No. 104 above but chair dining with cushion, complete all as specified and directed. (Drg No. FD/MAP/06)

STEEL FURNITURE Replacement of seat and back of chair revolving steel with arms hydraulic, foam cushion 50mm thick, 480mm covered with tapestry cloth, complete all as specified and directed. (Drg No. TP)

Replacement of hydraulic system of chair revolving steel, complete all as specified and directed. (Drg No. TP)

Replacement of wheel of revolving chair, complete all as specified and directed. (Drg No. TP)

Replacement of arms of chair revolving steel with arms of best quality, complete all as specified and directed. (Drg No. TP)

Replacement of glass shutter for book case steel of size 695mm x 285mm x 5mm thick and taking down old glass, complete all as specified and directed. (Drg No. FD-90 M)

Supply and fixing of aluminium handle of size 100mm, complete all as specified and directed. (Drg No. FD-90 M) .

Supply and fixing of lock of 50mm size with double key, complete all as specified and directed. (Drg No. FD-90 M) .

Repair to chair CB without arm by spot welding of legs / stiffener / frame as per drawing, complete all as specified and directed. (Drg No. FD-75 M)

M & L for replacement of seat of chair CB steel without arm with 2nd class hard wood well seasoned seat frame duly painted with two coats of synthetic enameled black paint over a coat of primer including canning of seat complete as per Godrej pattern with 3mm wide white plastic cane half round and fixed with chair frame with 04 Nos screw with washers of size 75mm x 3mm all other as per drawing and taking out old seat, complete all as specified and directed. (Drg No. FD-75 M)

M & L for replacement of back of chair CB steel without arms with 2nd class hard wood well seasoned back frame duly painted with two coats of synthetic enameled black paint over a coat of primer including canning of back complete as per Godrej pattern with 3mm wide half round white plastic cane and fixed with chair frame with 04 Nos screw with washers of size 75mmx 3mm all other as per drawing and taking out old back, complete all as specified and directed. (Drg No. FD-75 M)

M & L for replacement of stiffener of chair CB steel with flat iron 25mm x 3mm size, 500mm long fixed to frame by welding, complete all as specified and directed. (Drg No. FD-75 M)

M & L for replacement of PVC cap 20mm dia including taking out old cap, complete all as specified and directed. (Drg No. FD-75 M)

Repair of seat for chair revolving steel with arm for necessary welding frame and legs, complete all as specified and directed.

Replacement of seat of chair revolving steel /chair computer with arm/ w/o arms non- hydraulic with 12 mm thick plywood of size 450mm x 445mm and back 510 x 430mm covering with foam cushion 50 mm thick with tapestry cloth, complete all as specified and directed.

Replacement of wheel for revolving chair, complete all as specified and directed.

Replacement of arms of revolving chair, complete all as specified and directed.

M & L for replacement of top of table 3'x2' with/without drawer with 18/19mm thick one side teak faced pre-laminated particle board (exterior grade) with 4mm thick teak wood edging all round and fixed with screwed all as per drawing & taking out old top, complete all as specified and directed. (Drg No. FD-1007 & 1008)

M & L for replacement of unserviceable legs by 25mm square tube of wall thickness 1.6mm and welding complete and painting with two coats of synthetic enamel paint over a coat of red oxide primer all as per shown on drawing including taking out old leg, complete all as specified and directed. (Drg No. FD-1007 & 1008)

M & L for replacement of damaged stiffener / short rail by 25mm square tube of wall thickness 1.6mm and welding complete and painting with two coats of Synthetic enamel paint over a coat of red oxide primer all as per shown on drawing including taking out old leg, complete all as specified and directed. (Drg No. FD-1007 & 1008)

M & L for replacement of damaged long rail / centre stiffener by 25mm square tube of wall thickness 1.6mm and welding complete and painting with two coats of synthetic enamel paint over a coat of red oxide primer all as per shown on drawing including laking out old leg, complete all as specified and directed. (Drg No. FD-1007 & 1008)

M & L for replacement damaged drawer of table made out of 1mm thick MS black sheet including making shape, welded with gas welding and painting with two coats of synthetic enamel paint over a coat of red oxide primer all as per drawing including taking out old drawer, complete all as specified and directed. (Drg No. FD-1007 & 1008)

M & L for replacement of hard rubber shoe as per existing as approved, complete all as specified and directed. (Drg No. FD-1007 & 1008)

M & L for replacement of top of table dining for OR’s with 18/19mm thick one side teak faced pre-laminated particle board (exterior grade) with 4mm thick teak wood edging all round and fixed with screwed all as per drawing & taking out old top, complete all as specified and directed. (Drg No. FD-165 M)

M & L for replacement of damaged legs by 25mm square tube of wall thickness 1.6 mm by welding complete and painting with two coats of Synthetic enamel paint over a coat of red oxide primer all as per shown on drawing & taking out old leg , complete all as specified and directed. (Drg No. FD-165 M)

M & L for replacement of centre stiffener and long rail with 25mm square tube of wall thickness 1.60 mm welded to frame complete and painting with two coats of Synthetic enamel paint over a coat of red oxide primer all as per shown on drawing including taking out old stiffener and long rail, complete all as specified and directed. (Drg No. FD-165 M)

All as per item No.151 above but short stiffener and short rail, complete all as specified and directed. (Drg No. FD-165 M) .

M & L for replacement of hard rubber shoe as per existing as approved, complete all as specified and directed. (Drg No. FD-165 M)

M & L for replacement table top of size table office officer steel 1680mm x 870mm with 18/19mm thick one side teak faced pre-laminated particle board (exterior grade) with 4 mm thick teak wood edging all round and fixed with screwed with frame all as per drawing including taking out old top, complete all as specified and directed. (Drg No. FD-1003)

M & L for replacement of top of table office officer steel of size 1800mm x 1200mm with 18/19mm thick one side teak faced pre-laminated particle board (exterior grade) with 4mm thick teak wood edging all round and fixed with screwed with frame all as per drawing including taking out old top, complete all as specified and directed. (Drg No. FD-1003)

M & L for replacement damaged drawer of table made out of 1mm thick MS black sheet including making shape, welded with gas welding and painting with two coats of Synthetic enamel paint over a coat of red oxide primer all as per drawing & including taking out old drawer, complete all as specified and directed. (Drg No. FD-1003)

M & L for replacement of damaged legs / stiffener by 25mm square tube of wall thickness 1.6 mm and welding complete and painting with two coats of Synthetic enamel paint over a coat of red oxide primer all as per shown on drawing & including taking out old leg / stiffener, complete all as specified and directed. (Drg No. FD-1003)

M & L for replacement of unserviceable lock of drawer with new lock 6 Lever 65 mm long best quality with double lock, complete all as specified and directed. (Drg No. FD-1003)

M & L for replacement of hard rubber shoe as per existing, complete all as specified and directed. (Drg No. FD-1003)

Taking down old unserviceable locking devise of almirah large steel and supply and fixing new lock of suitable size provided with duplicate keys as per sample, fixed with screws, all as per drawing, complete all as specified and directed. (Drg No. FD- 67 M & 1031)

M & L for repairing locking device of almirah steel large including lock bar, complete all as specified and directed. (Drg No. FD- 67 M & 1031)

M & L for repairing of door shutters by denting and necessary adjustment as required, complete all as specified and directed. (Drg No. FD- 67 M & 1031)

Taking down old unserviceable handle of almirah large steel and supply and fixing new chromium plated brass handle, fixed with screws, all as per drawing, complete all as specified and directed. (Drg No. FD- 67 M & 1031)

Taking down old unserviceable legs of almirah large steel and supply and fixing new legs made out of 1mm thick mild steel black sheet and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer including preparation surfaces, all as per drawing, complete all as specified and directed. (Drg No. FD- 67 M & 1031)

Taking down old unserviceable shelves of almirah large steel and supply and fixing new shelves made out of 1 mm thick mild steel black sheet made to shape and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to new surfaces of shelves including preparation of surfaces, all as per drawing, complete all as specified and directed. (Drg No. FD- 67 M & 1031)

M & L for replacement for seat of chair CB steel with arm with 2nd class hard wood well seasoned seat frame duly painted with two coats of synthetic enameled paint of black colour over a coat of primer including canning of seat complete as per Godrej pattern with 3mm wide half round white plastic cane and fixed with screw and washers as per drawing and including taking out old seat, complete all as specified and directed. (Drg No. FD- 75 M )

M & L for replacement for back of chair with 2nd class hard wood well seasoned including canning Godrej pattern with 3mm wide half round white plastic cane including painting, complete all as specified and directed. (Drg No. FD- 75 M )

M & L for replacement of stiffener of chair CB steel with flat iron 25mm x 3mm size, 500mm long fixed to frame by welding, complete all as specified and directed. (Drg No. FD- 75 M )

M & L for replacement of PVC cap 20mm dia including taking out old cap, complete all as specified and directed. (Drg No. FD- 75 M)

M & L for replacement of damaged arms with well seasoned 1st class hard wood duly painted with two coats of synthetic enameled paint of black colour over a coat of primer all as per drawing, complete all as specified and directed. (Drg No. FD- 75 M)

M & L for replacement of table top office clerk steel of size 1370mm X 760mm with 18/19mm thick one side teak faced pre-laminated particle board (exterior grade) with 4mm thick teak wood edging all round and fixed with screwed all as per drawing including taking out old top, complete all as specified and directed. (Drg No. FD- 84 M, 84 & 1004)

M & L for replacement of table top of size 1160mm x 570mm with 18/19mm thick one side teak faced pre-laminated particle board (exterior grade) with 4mm thick teak wood edging all round and fixed with screwed with frame all as per drawing & and taking out old top, complete all as specified and directed. (Drg No. FD- 84 M, 84 & 1004)

M & L for replacement drawer made out of 1mm thick MS black sheet including making shape, welding and painting with two coats of Synthetic enamel paint over a coat of red oxide primer all as per drawing & taking out old drawer, complete all as specified and directed. (Drg No. FD- 84 M, 84 & 1004)

M & L for replacement of damaged legs / stiffener with 25mm square tube of wall thickness 1.6mm welding complete and painting with two coats of synthetic enamel paint over a coat of red oxide primer all as per shown on drawing including taking out old leg / stiffener, complete all as specified and directed. (Drg No. FD- 84 M, 84 & 1004)

M & L for replacement of unserviceable lock of drawer with new lock of 6 Lever 65 mm long double key, complete all as specified and directed. (Drg No. FD- 84 M, 84 & 1004)

M & L for replacement of hard rubber shoe as per existing as approved, complete all as specified and directed. (Drg No. FD- 84 M, 84 & 1004)

Taking down old unserviceable legs of locker steel and supply and fixing new legs made out of 1mm thick mild steel black sheet and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to new legs including preparation of new surfaces, all as per drawing, complete all as specified and directed. (Drg No. FD- 1029)

M & L for replacement for old damaged hasp and S & F staples with new hasp and staples chromium plated safety type 100mm long, complete all as specified and directed. (Drg No. FD- 1029)

Taking down old unserviceable handle of locker steel and supply and fixing new chromium plated brass handle, 100mm size, ‘D’ type, complete all as specified and directed. (Drg No. FD- 1029)

Taking down old unserviceable hinges of locker steel and supply and fixing new mild steel hinges, 75mm size of approved quality, complete all as specified and directed. (Drg No. FD- 1029)

M & L for repairing of door shutters by denting and necessary adjustment as required, complete all as specified and directed. (Drg No. FD- 1029)

M&L for replacement of charpoy GI pipe angle iron of size 25x25x5mm thick, 225mm long welded to long rail and short rail at corners of Charpoy GI Pipe drilling holes for fixing plywood with bolts and painting to angle iron pieces with two coats of black synthetic enameled paint over a coat of red oxide zinc chrome primer including taking out old angle, complete all as specified and directed. (Drg No. FD- 220)

M&L replacement of angle iron of size 25x25x5 mm thick, 850 mm long welded to long rail horizontally (one end to each long rail) at equal distance including drilling holes where ever required for fixing plywood with bolts and painting to angle iron pieces with two coats of black synthetic enameled paint over a coat of red oxide zinc chrome primer including taking out old angle, complete all as specified and directed. (Drg No. FD- 220)

Taking out old Plywood and replacement of commercial plywood of Size 1950mm x 900mm x 12mm thick grade BWR confirming to IS 303-1975 with 4mm wide 2nd class hard wood beading all-round the plywood, fixed to charpoy frame with and including nuts, bolts and GI washers (minimum 12 Nos. per charpoy), dia of bolt not less than 8mm, complete all as specified and directed. (Drg No. FD- 220). MAKE : GREEN PLY, CENTURY PLY, NOVAPAN/ANCHOR/ARCHIDPLY

Dismantling of old unserviceable / worn out threaded following parts of the charpoy GI pipe and replace the same with new part without damageing other part all as per drg for replacement of long rail made out with 32mm GI pipe including cutting threading etc, complete all as specified and directed. (Drg No. FD- 220)

Short rail (converted from U/S long rail), complete all as specified and directed. (Drg No. FD- 220)

Legs Converted from U/S short rail, (complete with clamps for FMN set and wooden plug), complete all as specified and directed. (Drg No. FD- 220)

Wooden plugs made of 2nd class hard wood as per drg, complete all as specified and directed. (Drg No. FD- 220)

GI Elbow three way ISI marked 32mm dia, complete all as specified and directed. (Drg No. FD- 220)

GI check nut ISI marked, complete all as specified and directed. (Drg No. FD- 220)

Taking down old unserviceable locking device almirah medium steel and supply and fixing lock of suitable size provided with duplicate keys, complete all as specified and directed. (Drg No. FD- 67 M & 1032)

M & L for repairing of door shutters by denting and necessary adjustment as required, complete all as specified and directed. (Drg No. FD- 67 M & 1032)

Taking down old unserviceable handle and supply and fixing new chromium plated brass handle, 125mm fixed with screws, all as per drawing, complete all as specified and directed. (Drg No. FD- 67 M & 1032)

Taking down old unserviceable legs of almirah medium steel and supply and fixing (by welding) new legs made out of 1mm thick mild steel black sheet and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to new legs including preparation of new surfaces, all as per drawing, complete all as specified and directed. (Drg No. FD- 67 M & 1032)

Taking down old unserviceable shelves of almirah medium steel and supply and fixing new shelves made out of 1mm thick mild steel black sheet made to shape and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer to new surfaces of shelves including preparation of surfaces, all as per drawing, complete all as specified and directed. (Drg No. FD- 67 M & 1032)

M & L for scrapping out old painted (external and internal) surface of following steel furniture and applying two coats of synthetic enamel paint (1st quality) over a coat of red oxide zinc chrome primer by spray painting including preparation of surfaces and filling cavities with putty for almirah large steel, complete all as specified and directed. (Drg No. FD- 1031)

All as per item No.196 above but almirah medium steel all type, complete all as specified and directed. (Drg No. FD-67 & 1032) .

All as per item No.196 above but locker steel, complete all as specified and directed. (Drg No. TD, FD-1029) .

All as per item No.196 above but book case steel, complete all as specified and directed. (Drg No. FD-90 M) .

All as per item No.196 above but table office clerk steel, complete all as specified and directed. (Drg No. FD-1004) .

All as per item No.196 above but table office offrs steel, complete all as specified and directed. (Drg No. FD-1002) .

All as per item No.196 above but chair CB steel with arm, complete all as specified and directed. (Drg No. FD-75) .

All as per item No.196 above but chair CB steel without arm, complete all as specified and directed. (Drg No. FD-75) .

All as per item No.196 above but table dining ors, complete all as specified and directed. (Drg No. FD-165) .

All as per item No.196 above but table 3'x2’ with drawer steel, complete all as specified and directed. (Drg No. FD-1008) .

All as per item No.196 above but table 3'x2’ without drawer steel, complete all as specified and directed. (Drg No. FD-1008) .

All as per item No.196 above but book shelf open large steel, complete all as specified and directed. (Drg No. FD-69) .

All as per item No.196 above but rack steel adjustable 3075x900x500mm/ 1905x915x305mm, complete all as specified and directed. (Drg No. FD-84) .

All as per item No. 196 above but rack steel 6 tier , complete all as specified and directed. (Drg No. FD-106) Note: An amount of Rs. 17726.00 on account of credit schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

SHRI PARTHA DUTTA

M/S ANIL KUMAR BAUL

SHRI D P AGARWAL

M/S. KUMAR CONSTRUCTION CO.

M/S RELIABLE CONSTRUCTION CO.

CONSTRUCTION SHELTER

M/S DEY ENTERPRISE