Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.6 LAccepted-AOC 620 DIAMOND HARBOUR ROAD BEHALA INDUSTRIAL ESTATE PLOT NO F A KOLKATA 34 | KOLKATA | WEST BENGAL | L1 | Accepted-AOC AOC | |
| 2 | L2₹3.7 L+₹5,479.92 (1.50%)Rejected-Finance | L2 | Rejected-Finance Higher than L1 |
Tender Value
₹3.8 L
EMD Value
₹7,590
Closing Date
27 Sept 2024, 2:00 pmClosed
EE_KCED_PWD
Khadya_Bhawan_11A_Mirza_Ghalib_Street_Block_A_3rd_Floor_Kokata_700087
SITC of industrial type AC machine for office use of the General section of the superintending Engineer National Highway Circle No-I, P.W.(Roads) Directorate, 5th floor, Block-Central Bhawan, 11A MIrza Ghalib Street, Kolkata-87.
2024_PWDE_749080_1
WBPWD/EE/08/IR/T/KCED/I of 2024-25(2nd call)
Open Tender
Electrical Work/ Equipment
Item Rate
15 days
Central Bhawan, 11A MIrza Ghalib Street
Please refer Tender documents.
4 documents required · 4 mandatory
₹7,590
Office_of_EE_KCED_PWD
28 Feb 2025
11 Sept 2024
30 Sept 2024
11 Sept 2024
27 Sept 2024
20 Sept 2024
19 Sept 2024
Amount
Supply & Delivery of R410A/R32 Refrigerant Gas concealed type Split Air Conditioner of rated cooling capacity of 24000 BTU/hr. with 1No. Rotary compressor, 1no. IDU of rated power supply-230V-1ph-50Hz. , 1no. ODU of rated power supply-230V-1ph-50Hz. Air-flow/per IDU:-(618-953) CFM.(H/M), Cooling coil and condensing coil must be made with copper.Including mending good the damages to original finish (Make- Mitshubishi Electric/Daikin/carrier).
Installation, Testing & Commissioning of the above Concealed HAT type Air Conditioning systems with all necessary accessiores for hanging Indoor (with suitable clamps fixed on ceiling incl. fasteners) & Outdoor Units as per EIC :- For 2.0 TR Concealed HAT unit.
SITC of i)Copper refrigeration pipe line for liquid and suction line with hard drawn copper piping with supports & brackets---Cu. Pipes Liquid line dia 6.35 mm .with 9mm thick nitrile insulation.(make- Mandev/Royku/Hitachi)
SITC of ii)Cu. Pipes Suction line dia 15.88 mm with 13mm thick nitrile insulation.(make- Mandev/Royku/Hitachi)
DRAIN PIPING: Supply of laying of PVC / HDPE hared pipes with Insulation, fitting, accessories, bends, elbows, tees, flanges, tappings, wall sleeves, hangers, supports, anchors---25mm.Dia (Make - suprime/oriplast)
Construction of MS structure for instalation and future maintanance of Acs outdoor units made with MS C-Channel 50x50x75 mm 6mm thick, MS angle 50X50X6mm thick and 40mmX 6mm thick MS strip incl. grouting in wall and paintings as per direction of EIC. Drawing and design to be approved by the EIC.
Supplying and Drawing 1.1 KV single core 2x4sq mm + 1X 2.5 sq.mm stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (KEI) through 20mm dia PVC rigid conduit 'FR' [Precision Make] on wall/beam/ceiling with saddles and other accessories as required and mending good damages to building works as per direction of E.I.C.(from HTPN DB to OLP to 0utdoor unit of AC machines)
Finishing of the PVC insulated copper wire ends by socketing with pin type copper sockets and insulated tapes etc. including suppying sockets, tapes as follows-2X 4 sqmm + 1 X 2.5 sqmm.
Supply and Fixing OLP-3, 21 Amp A.C. machine Starter incl. 4 module G I box conceal in wall as required including connections.(Make - Electron)
Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), with plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc.
S&F of aluminium powder coated contains grill with proper finishing (as per EIC) suitable for above mentioned concealed split type machine.
Providing cover the IDU units with incl. ACP sheets minimum thickness 4mm (with necy fixing accessories) (including provision for door for future maintenance of IDU units)(Designed must be appproved by EIC).
NEW MODERN COOLING (BID ID -5643057)
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .