Face lifting of VIP Guest House Dachigam by way of providing and fitting of new window panes and external wooden barks including repairs to chain link fencing.

Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead : Upto 10 mm thick.

Labour charges for fixing of available wooden barks design, fit / cut to required size / shape as directed by EIC including all necessary fixture, bonding agent excluding cost of scaffolding complete job.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : of area of 3 sqm. and below.

Providing and fixing 30mm wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge: Second class Kail wood.

Providing and fixing 30mm panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Second kail wood.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II IS : 14587

Providing and fixing gang saw cut, mirror polished, pre-moulded and pre-polished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels (Area of slab upto 0.5 sqm)

Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0mm thick glass panes.

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storey height made with 40 mm dia M.S. tube1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffoldings for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Applying priming coat With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work.

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work.

Extra for fixing marble / granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position: Budloo / Fir wood including cost of scaffolding cutting, making and placing in position complete job.

Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /stee frame work, complete as per direction of Engineer-in-charge (Frame work shall be paid for separately) 12mm thick commercial ply conforming to S : 1328 BWR type.

Providing and fixing 12mm thick T&G planks made of imported wood (New Zealand pine or equivalent) for roof soffits and ceiling on wood work in false ceiling, partitions sawn and put-up in position in budloo wood (including frame work) of required size at required intervals including cost of necessary adhesive and cost of nails etc complete job including touch wood polish and cost of nails / screws to be approved by EIC complete.

Providing and fixing of wardrobes, cabinets of 19mm thick marine ply 12mm backing of approved brand in wardrobes cabinets, shelves, counters, tables drawers, sliding shelves etc all edges/ top of visible side of 19mm ply shall be fixed with 15mm thick margin wherever required all exposed faces out side shall be finished with lamination of Dulmica / Sunmica of 1mm minimum thickness of approved shade and make to be fixed including all hardware fittings, fancy handles, hinges, catchers cover fillets, moldings, nails, fevicol SR and SH, screws, washers etc all complete as per drawings / directions of EIC 600mm deep, finished face area to be taken for measurements.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead for thickness of tiles 10mm to 25mm.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles above 25 mm and upto 40 mm.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in- charge: 1:3:6 or richer mix (i/c equivalent design mix).

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil.

P/L stone soling (Hand packed) in trenches incl. ramming, dressing, watering etc. incl. all leads, lifts and carriage upto site of work complete.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns etc.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in- charge. Made of G.I. wire of dia 4 mm.

Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) :

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. In all colours, shades, except White, Ivory, Fume Red Brown.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colou r& pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as per direction of Engineer-in-Charge. 60mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.

Chequerred precast cement concrete tiles 22mm thick in footpath and courtyard, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing, cleaning and curing complete, on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 coarse sand) Medium shade using 50% white cement and 50% ordinary cement.

Providing and fixing stainless steel of grade 304, 25mm diameter curtain rods fixed with gip screws, PVC nyloss complete (Finished measurement to be taken)

Providing and fixing ornamental / antique brass curtain brackets double rod base place, with end caps for curtain rods of required design shape, colour as directed by Engineer-In-Charge, fixed with gip screws, PVC nyloss and wooden plugs etc wherever necessary complete.

12mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand)

Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- (i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits. (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine. (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge.

Cleaning and desilting of manholes / gully trap chamber, including removal of rubbish mixed with earth etc and disposal of same, all as per the direction of Engineer-in-charge.

Cleaning of PVC tanks / overhead (independent staging) including disposal of site and rubbish, all as per direction of Engineer-In-Charge. The cleaning shall consist following operationLi) Tank shall be emptied of water by pumping and bottom shall be cleaned of silt and other deposite ii) Entire surface area of the PVC tank shall then scrubbed thoroughly etc and pressure washed with water (iii) Chlorination of surface by li quid chlorine (iv) the treated surface shall be removal from the surface (v) finally the surface shall be treated with ultraviolet radiation etc as per direction of Engineer-In-Charge.

Engagement of skilled carpenter and skilled albour for repair to doors / windows including cost of nails screws, fevicol wherever required all as per the direction of Engineer-in-charge.

a) Skilled Carpenter.

b) Skilled labour.

Providing and fixing 20mm thick wooden planks ceiling / walls (frame work for base to be paid for separately) with M.S screws, nails etc 1st class deodar wood.

Providing and fixing coloured aluminium fittings of standard quality complete.

a) Tower bolt 100mm.

b) Tower bolt 150mm.

c) Handle 125mm.

d) M.S Butt Hinges 150mm.

e) Aldrop 200mm.

Applying two or more coats of Anti termite treatment preservative chemical emulsion as specified chlorophirpos / lindane concentrate of 20% on walls of wooden / bark surfaces.

Carriage of materials from source to site of work by mechanical means.

a) Stone aggregate 40mm and above avg. lead of 30 Kms.

b) Stone aggregate 40mm and below avg. lead of 30 Kms.

c) Sand for an avg. lead of 20 Kms

d) Bricks avg. lead of 40 Kms.