Construction of Control room building ,providing cable duct, Road, fencing work, retaining wall, leveling the yard and other related works for the establishment of Theriruveli 110 KV SS in Ramnad District.

Amount

Schedule I (Control room related works)

Schedule II (Cable duct, fencing and retaining wall related works)

Schedule III (Formation of road and related works)

Applicable GST Amount (Total GST Amount @18%)

Description of Work / Item(s)

Amount

Control room Civil works

Earth work excavation for foundation in hard stiff clay, stiff black cotton hard red earth, shales, muram, gravel, stoney earth and earth mixed with small size boulders with an initial lead, lift, etc, complete.

Supplying and filling of M sand in foundation and basement with well water and consolidation as per specn.incliding cost of all materials labour, lead, lift, etc., complete.

PCC 1:3:6 mix using 40mm HBS machine crushed metal for foundation with out formwork including cost of all labour, materials, lead, lift, curing, etc., complete.

RCC M25 using 20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement.For Column Footing concrete Raft.

RCC M25 using 20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For column concrete.

Refilling the foundation with excavated earth including ramming as per specification , cost of all materials lead and lift etc. complete.

RCC M25 mix using 20mm HBS metal (machine crushed) for Grade beam with form work including cost of cement all labour, materials, lead, lift etc. complete.

RCCM25 mix using 20mm HBS metal (machine crushed) for plinth beam with form work including cost of cement all labour, materials, lead, lift etc. complete.

Providing RCC 1:1.5:3 using 20mm HBG metal including cost of all materials, labour lift, hire charges for mixer machine vibrator with form work but excluding cost of providing reinforcement for cable duct bottom raft for pre cast cover slab

Brickwork in CM 1:5 mix using II class chamber brick of size 9"x 4 3/8" x 2 3/4" for bath, fol, brick on edge, partition wall, superstructure including cost of labour materials, curing, lead, lift, etc., complete.

Brickwork in CM 1:3 mix using II class champer bricks of size 9"x 4 3/8"x2"3/4" for super structure including cost of all materials, labour, lead, lift, curing, etc., complete.

RCC M25 mix using 20mm HBS metal (machine crushed) for contineous lintel, tier slab and bed block, cover slab for staircase slab, water tank slab with formwork including cost of all materials, lead, lift, etc., complete.(by using mixer machine).

RCC M25 mix using 12 to 20mm hbs metal (machine crushed) for Sun shade 60cm. Projection 80 mm thick at wall end and 50 mm thick at free end and loft, with form work including cost of all materials, labour, leas, lift, etc., complete. (by using mixer machine).

RCC M25 using 20mm HBS metal (machine crushed) metal for " T " beam, with centering shuttering including cost of all material, lead, lift, etc, complete, but excluding cost of steel reinforcement

RCC M25 using 20 mm hbs metal (machine crushed) for roof slab concrete of 150 mm thick with formwork including cost of all materials, labour, lead, lift, centering shuttering , curing, etc., complete. But excluding cost of steel reinforcement.

Supplying and fabricating and placing in position of MS / RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire, etc., complete.

Plastering with CM. 1:3 mix 12mm thick for ceiling,fol, bath, rcc pillars, sunshade, loft, etc., including cost of materials, labour, lead, lift, watering, curing, etc., complete.

Plastering with CM.1:5 mix using 12mm thick for inside & outside walls, including cost of all materials, labour, lead, lift etc, complete.

Providing weathering course with good quality of readymade cooling tiles laying over cm 1:3, and pointed with the same oiled mortor including cost of, cement all materials, curing, labour, lead and lift etc., water charges ,and including cost of material and labour for applying water proof component over the terrace etc., complete.

Providing projected border of 7.50cm width on top of parapet wall in CM 1:3 mix 12mm thick including cost of all material labour, lead, lift, curing etc., complete.

Providing projected border of 20cm width on plinth beam side in CM 1:3 mix 12mm thick including cost of all material labour, lead, lift, curing etc., complete.

Manufacturing and supplying of steel door using 40x40x6mm for outer frame 25x25x6mm for shutter frame with MS flat 25x6mm 3 Nos and for panels with 12mm thick one side laminated MDF duratuff exterior quality with bolts, washers, hinges, 12mm dia tower bolt etc., complete.

M&F in position of anodised aluminium partially glazed single leaf door using outer frame 101.60 x 44.45 x 2.10mm @ 1.608Kg/M and door inner frame side and vertical 53.70 x 44.45 x 2.30mm @ 1.238 Kg/M, door bottom section 83.50 x 44.45 x2.40mm@ 1.679Kg/m and diveder and top of door frame 47.62 x 44.45x 2.17 mm@ 1.072 Kg /M glazing clips of 17.30 x 19.0 x 0.60mm @ 0.083 Kg/M, rubber beedings, hinges, handle, hydraulic floor spring, automatic door closer etc, and with 12mm tk. one side laminated board at bottom half portion and top half portion with 5mm thick sun cool glass including cost of all materials, lead, lift, etc, complete Single leaf door 1.20 x 2.20 m

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The window should be got approved from the Executive Engineer before use on work cost of all materials , lead, lift , etc. complete, as per standard specification

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) doors fabricated of casement type (open) from the profile the size of outer frame 60mm x 55mm and shutter with aouter wall thickness of 2.40 mm .the door unit should be designed with all corner joint mitred and fusion welded profile are reinforcement with 25x24x25mm steel reniforced with thickness of 1 mm to have dimensionally stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74 mm. The profiles should have co-extruded seals. Hardware: All the hardwarenlikenfriction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.

Supplying and fixing PVC door shutter made of chamber hallow plastic sections of size 200mmx20mm thick

Supplying and fixing of man hole cover with CI frames (60cm x 60cm ) of best quality including cost of materials lead lift etc complete.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 8mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (blackcolour) covered with all over the edges of frame and shutter.The corners and joints should be welded and cleaned. Radiations pin headed or Pin headed/Fluted/Figured glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The ventilator should be got approved from the Executive Engineer befoe use on work and as per specications

Supplying and fixing of 110 mm dia downfall pipe

colour washing two coats with exterior emulsion paint over one coat of white cement primer for outside wall including cost of all materials, labour, lead, lift etc complete.

Colour washing two coats of interior emulsion paint over one coat of white cement primer with best quality of wall putty for interior walls including cost of all materials, labour, lead, lift etc., complete.

White washing two coats with best quality of white cement and robin blue pigment over a primary coat for ceiling, exposed surfaces of wall, beam, slab, sunshade, lintel, etc.,including cost of all materials, lead, lift, etc., complete.

Flooring with approved Vitrified tiles 600x600mm of approved Quality, design & colour (Johnson or equivalent make)laid in cement mortar 1:3 -12mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, water charges,labour, lead, lift, etc. complete.

Dadooding walls with approved quality of glazed tiles, size and design (johnson or equivalent make) laid in cement mortar 1:3 -10mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the jointsand pointing flush with the surface , including cost of all materials, water charges labour, lead, lift, etc. complete.

Flooring with approved acid proof tiles over cement mortor 1:3 20mm thick in floor including pointing with white cement finishing the joints flush pointing the surface etc including cost of all materials, water charges labour, lead, lift, etc. complete. ( Battery Room )

Supplying and laying of aluminium LTUG cable 4x4sq.mm PVC armoured best insulator etc.,

Supplying anf fixing of Wash basin 500x400mm with mirror and towel rod including cost of labour, lead, lift etc complete.

Providing Sintex water tank of capacity of 1000 lits including cost of material, labour, lead, lift, transportation and placing in position over head room etc., as directed by the engineer at site.

Providing and fixing sanitary fitting consisting of Neycer/parryware of oriya patten Water Closet 45cm with P/S trap connecting with PVC ventilating shaft and Y bend complete, including cost of all material, labour, lead, lift, etc, complete.Europian water closet

Supply and fixing of PVC floor trap 100 x 75

Providing inspection chamber for sufficient intervels throughout the line 0.45x0.45m. Size to a depth as below with proper gradient of the sewerline and BW. in CM 1:5 with CI. cover at top and bottom foundation PCC 1:3:6 using 40mm metal plastering with CM1:3 12mm thick and all lead, water charges ,lift etc.complete. 0.45x0.45m size to a depth of 0.45m

Supplying and fixing of PVC shower and nickel control valve including cost of labour lead lift etc complete.

Supplying and fixing inposition of GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete.32 mm dia GM Gate valve

Supplying and fixing inposition of GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete. 25 mm dia GM Gate valve

Supplying and fixing in position of 15mm dia brass screw down bib cock of best quality including cost of labour lead lift etc complete.

Supply and fixing 1No. 4 way S.P and natural distribution board with insulator and 1No. MCB of 6 amps each of standard company

Supplying and fixing of 4 pole 32 Amps Isolator 1 No with MCB box 4 pole including terminal block for testing purpose at relay and CC room, cost of all materials, lead, lift, labour charge, etc., complete.

Wiring with 2x1.5 sq.mm PVC insulated Mutlistrand unsheathed copper conductor cable 1100 v grade in suitable PVC rigd pipe on wall and ceiling with reputed make switch boxes earthwire connection in 14 SWG TC wire for light point / Fan point including cost of wire ,labour lead etc. complete.of approved quality (For Electronic regulator)

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated Multistrandunsheathed Cu.conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in in flush with wall, with 150mm x 100mm x 113mm TW switch box with 3 mm thick hylum sheet cover for 5 A 3 Pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC Plug point.

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor, with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals to the fittings with tube.

Wiring with 2 x 2.5 sqmm (56x0.3) PVC insulated Multistrand unsheathed copper cable 1100 v grade in suitable PVC rigd pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150x100x113 mm TW Swich box with 3mm thick hylem sheet for 15 A 3 PIN non interlocking CS plug with continuous earth wire 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed power plug point

Supply and fixing of 1400 mm (56") AC ceiling fan complete with stepped electronic 300 W regulator with 1.0m down rod including fan clamp with side plates and cross arm of size 450mm.

Supply and fixing of 20 W LED 3000K flu.type fitting complete on wall/ceiling with tubes and PVC unsheathed Copper leads from terminal to the fitting.

Supply and fixing of 32 Amps DP switch of 500 V with metal clad with fuse and neutral (side handle) on suitable TW board, with earth connection only

Earthing as per P.W.D standard with an earth electrode of 2 mtr. Class 'B' GI pipe of dia not less than 32mm complete with necessary masonry work

Supply and fixing of 450 mm sweep (light duty) AC exhaust fan with venedian blades complete

Supplying and fixing of digital wall clock 1 No, floor coir mat 2000x600 for Entrance 1000x500 - 2 No.,towel rod, floor trap, soap tray for office of approved make and quality including the cost of all materials, leads, lifts etc., complete

Engraving the month and year of construction

Charges for conducting electrical logging by geologist of authorised agency for providing the slotted pipes in the borewell including transport charges etc., complete

Drilling of borewell in alluvial soil or sedementary strata of clay and sand stone, shale pebbles, boulders etc., by first taking a pilot bore of 140mm/150mm dia and then enlarging to required dia by direct or reverse rotary mud circulation method using rotrotary rigs, fuel, labour and drilling bentonite and water required for drilling at site. upto 60.0m depth ending below GL

Drilling of borewell in alluvial soil or sedementary strata of clay and sand stone, shale pebbles, boulders etc., by first taking a pilot bore of 140mm/150mm dia and then enlarging to required dia by direct or reverse rotary mud circulation method using rotrotary rigs, fuel, labour and drilling bentonite and water required for drilling at site. From 60m upto 90m depth ending from groundlevel

Reaming from 150mm dia pilot bore to 300mm dia bore as directed by the engineer at site upto 60mm depth ending from G.L

Reaming from 150mm dia pilot bore to 300mm dia bore as directed by the engineer at site From 60m upto 90m depth ending from groundlevel

Charges for developing the borewell with air compressor including transportation, labour and fuel charges for compressor as directed by the engineer in charge at site.

Supplying of 165mm/168mm dia (outer) PVC plain casing pipe/slot with ISI make of approved quality by the engineer at site with shell thickness 7.5mm to 8.5 mm with PVC couplers of required size for jointing the pipes including transport charges loading unloading etc complete.

Supplying and labour charges for packing annular space with pebbles of size and quality as approved by the engineer at site including cost of all materials viz, pebbles, paste etc.,

S&F of 3 phase 3HP Submersiable pump with accessories of approved make of Texmo or ELG Iincluding cost of all materials,labour transport,lead,lift etc with mounting platform & foot valve arrangement and 3 phase 15 amphs L& T starter arragements etc complete

Supplying and fixing 32mm dia outer HDPE hose of fine TEE make ISI with connecting specials for such as line including cost of materials labour charges for fixing etc., complete.

Supply & Fabrication and fixing in position GI/MS angle for cable duct including all leads and lifts etc., complete and placing in position as per the specification and drawings and as directed by Site Engineer.

Painting all exposed faces of steel works two coats an approved enamal paint over one coat of primer coat including cost of all materials, lead, lift, labour etc complete.

Collection, supplying, stacking and spreading & filling of red gravel including compaction,cost of all materials lead lift labour etc complete as per the direction of site engineer.

Supplying and fixing of 110mm dia PVC pipe including cost of labour lead lift etc complete

S&F of 110mm PVC Tee including cost of labour lead lift etc complete

Supply and fixing of 110mm PVC pipe with cowl-3m height including cost of labour lead lift etc complete

S&F 100mm dia PVC bend including cost of labour lead lift etc complete

Providing and laying PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., 32mm dia

Providing and laying PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., 25mm dia

Supplying and fixing of angle with 18Kg sheet proper welding for various size of name board with holding post height 2m above the GL of angle 65x65x6mm and painting and lettering the name of office over the two coat of painting as the direction of site engineer including cost all brush, painting, labour, materials etc complete.

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. S Type chair with nylon seated

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. Steel side rack open type

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. Steel half bench

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete steel stool

Supply of furnitures manufacture by 'TANSI' or any other ISI mark including cost of all materials, labour, lead and lift etc., complete. SC table

Supply of furnitures manufacture by 'TANSI' or any other ISI mark Steel almirah size 6 1/2' x 3' x 1 1/2' with four shelves forming five compartment with olive green including cost of all labour, lead, lift etc complete

Supply of furnitures any other ISI mark including cost of all materials, labour, lead and lift etc., complete PVC armed Chair of reputed make

Description of Work / Item(s)

Amount

Yard works

Earth work excavation for foundation in hard stiff clay, stiff black cotton hard red earth, shales, muram, gravel, stoney earth and earth mixed with small size boulders with an initial lead, lift, etc, complete.

Supplying and filling of M sand in foundation and basement with well water and consolidation as per specn.incliding cost of all materials labour, lead, lift, etc., complete.

PCC 1:3:6 mix using 40mm HBS machine crushed metal for foundation with out formwork including cost of all labour, materials, lead, lift, curing, etc., complete.

RCC M25 using 20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement.For Column Footing concrete transformer plinth, gate pillar, cable duct, sump, retaining wall, culvert etc.,

RCC M25 using 20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For column concrete.

Refilling the foundation with excavated earth including ramming as per specification , cost of all materials lead and lift etc. complete.

RCC M25 mix using 20mm HBS metal (machine crushed) for Grade beam with form work including cost of cement all labour, materials, lead, lift etc. complete.

Providing RCC 1:1.5:3 using 20mm graded HBG metal including cost of all materials, labour lift, hire charges for mixer machine vibrator with form work but excluding cost of providing reinforcement for cable duct bottom raft & for pre cast cover slab

PCC 1:2:4 using 20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. Complete.for encing, transformer plinth, etc.,

Brickwork in CM 1:5 mix using II class chamber brick of size 9"x 4 3/8" x 2 3/4" including cost of labour materials, curing, lead, lift, etc., complete. Retaining wall, cable duct, sump, etc.,

RCC M25 using 20 mm HBG metal (machine crushed) for septic tank slab , sump slab concrete of 150 mm thick with formwork including cost of all materials, labour, lead, lift, centering shuttering , curing, etc., complete. But excluding cost of steel reinforcement.

Supplying and fabricating and placing in position of MS / RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire, etc., complete.

Plastering with CM. 1:3 mix 12mm thick including cost of materials, labour, lead, lift, watering, curing, etc., complete.

Plastering with CM.1:5 mix using 12mm thick for inside & outside walls, including cost of all materials, labour, lead, lift etc, complete.

Supplying & fixing of M.S. rail (90 IBS) for transformer plinth including cost of rail, cutting the rail to the required length and welding grip rods for the rails, transport charges, labour for fixing and handling, T & P etc., complete.

colour washing two coats with exterior emulsion paint over one coat of white cement primer for outside wall including cost of all materials, labour, lead, lift etc complete.

Supplying and fixing inposition of GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete.32 mm dia GM Gate valve

Supply & Fabrication and fixing in position GI/MS angle for corner and intermediate fencing post and Supply of MS flat 65X10 mm (angle both side )& GI bolt & nut including cost of all materials, transporting, labour charges, welding charges, cutting charges, drilling holes with provision of GI 175x16mm size bolt, nut and washers of required sizes for holding chain link fencing, 1 coat of primer of approved quality and colour, enamel painting with two coats, all leads and lifts etc., complete and placing in position as per the specification and drawings and as directed by Site Engineer.

Supplying and fixing of best quality chain link fencing 50 x 50 mm spacing of 10 gauge including of labour charges of fixing the chain link fencing in the existing fencing post including cost of chain link, GI binding wire all labour, lead, lift etc complete.

Painting all exposed faces of steel works two coats an approved enamal paint over one coat of primer coat including cost of all materials, lead, lift, labour etc complete.

Supplying and fixing in position of MS grill Main gate , Wicket gate including cost of all materials lead, lift, etc. as per type design drawing with proper locking arrangements as directed by the engineer at site including cost of painting with two coats of enamel paint over with one coat of red oxide.

Collection, supplying, stacking and spreading & filling of red gravel including compaction,cost of all materials lead lift labour etc complete as per the direction of site engineer.

Supply and spreading of quarry dust inside the yard as per std. spec.including cost of materials ,labour lead,lift etc

Supply and Spreading of 20mm of HB stone inside the yard as per std. spec.including cost of materials , labour lead,lift etc

Supplying and fixing of earth trough including cost of labour lead lift etc complete.

Providing and laying PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., 32mm dia

Providing and laying PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., 25mm dia

Providing and laying PVC high density pipe including cost of all materials viz.bend, labour for cutting threading fixing and tightening necessary excavation etc., 20mm dia distribution line with necessary end cap

Supplying and fixing inposition of GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete.32 mm dia GM Gate valve

Supplying and fixing inposition of GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete. 25 mm dia GM Gate valve

Supplying and fixing of 25mm end cap including all materials, labour, lead, lift, etc., complete.

Description of Work / Item(s)

Amount

Road works

Earth work excavation for foundation in hard stiff clay, stiff black cotton hard red earth, shales, muram, gravel, stoney earth and earth mixed with small size boulders with an initial lead, lift, etc, complete.

PCC 1:3:6 mix using 40mm HBS machine crushed metal for foundation with out formwork including cost of all labour, materials, lead, lift, curing, etc., complete.

RCC M25 using 12-20mm graded hard machine broken granite stone, including cost of all materials, form work, centering, curing, all labour charges, lead, lift, etc. complete. But excluding cost of steel reinforcement. For Culvert concrete

RCC M25 mix using 12mm to 20mm HBS metal (machine crushed) for Road concrete including cost of cement all labour, materials, lead, lift etc. complete.

Supplying and fabricating and placing in position of MS / RTS steel reinforcement for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift, labour, cost of binding wire, etc., complete.

Collection, supplying, stacking and spreading & filling of red gravel including compaction,cost of all materials lead lift labour etc complete as per the direction of site engineer.

Providing, Laying, Spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in sub base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

Providing expansion joint for road concrete as per specification in both direction using prevalid aspheltics pad 20 mm thick to full width and depth of 150mm thick plastering with CM 1:3, 20 mm thick including cost of cement, all materials, labour, curing, all leads, and lifts, etc., complete.as per standard specification.

Sp Constructions

petchimuthu

Sp Constructions

petchimuthu

Sp Constructions

petchimuthu

Sp Constructions

petchimuthu