Repair and painting work of the damaged park of Ward-13 Damodar Colony.

cleaning of jungle including up rooting of rank vegetion grass ,push ,wood trees and ampling of grit upto 30cm measured at a hieght of 1m above ground level removal of rubbish up to a distance of 50m out side the periphery of area cleared item no 259

Dismentling exiting plastar including disposal of refuse as directar by engineer incharg within distance of 60M sin 706

Dismentling of B/W in cement motar. (SIN No-692)

Dismentling of CC interlocking tiles

Concrete with 4 cm gauge brick ballast fine sand and cement in proportion are 1:6:12 in foundation and under floors, including supply of all materials, labour. T&P etc. required for proper completion the work.

M-150 Brick work in 1:4 one cement and three course sand, mortar in foundation in plinth including suopply of all material labour, T &P etc. required for proper completion of the work. S.I.No. 305(a)

Cement Concrete with 2 cm gauge approved graded stoneee grit, coarse sand and cement in the proportion of 4:2:1, including supply of all materials, labour, tools & plants etc required for proper completion of the work As per direction of E/I.

S/Laying of 22.4-53 mm size stone ballast.

Consalidation of stone ballast excluding of roller charges and excluding all SIN.755(B)

Supply of 80 mm thick ISI marked I shaped mechanicaly compressed interlocking cement concrete paver blocks manufatactered by high prussureand control vibration machine having plan dimension 200 x (160+120 mm )with minimum 5 mm thick topping of O.P. cement mixed with 25 %marble powder . The compresive strenth of concrete paver block shall not be less than 40 Mpa and 4.50 kg per no. including cost of all material labour T& P etc required for proper complition of work new item no-14 Work should be done with colour tiles.

12 mm thick plaster with cement and approved coarse sand mortar in 1:4 over brick work minium thickness not to be less than 1 Cm including supply of all material labour Tool & Plants etc. required for proper completion of the work. SIN No-584(A)

R.C.C. 1:1.5:3 in cement coarse sand and grit 2 cm. gauge. SIN 284 A

Mild steel or iron such as in plane reinforcement concrete.SIN.504

oil bound distemper ofapproved brand and manufacture and of required shadeon undercoated wall surface to give an eves hade over & including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar,Asian, paints after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even with plaster of approved synthetic material and sand papered smooth ncluding cost of all materials.

Painting or varnishing two cort with one prining coat SIN 644+645

M.S or Iron working heary size in grills/Stair case railing /gate/trusher/racks etc.SIN502(A)

Deduction cost of old C.C. Tiles+all comp.of work

Deduction cost of old bricks SIN 1(A)

Deduction cost of old brick bats SIN 1(F)