Construction of School Building at Kanjampatti Village in Thiruchuli Block under CSIDS 2016-17

Amount

Part A - Construction of Main Building

Earth work Excavation in all classes of soils such as hard stiff clay. Stiff block hard red earth, shales, murram, gravel, stoney earth expect hard rock requiring blassing and depositing on bank with all leads and lifts and all incidental charges such as

Filling with clear river sand in foundation including cost & conveyance to site and labour charges for watering raming and all other incidental charges etc., complete.

Cement Concrete 1:4:8 mix using 40mm ISS HBG metal including cost & conveyance of all materials to site including cost of cement which will be supplied departmentally from section store at the cost three of which will be recovered for the contractors bill

Brick Work in cement mortar 1:5 mix using country bricks of size (8 ¾ x 4 3/8 x 2 3/4) including cost & conveyance of all materials to site including cost of cement

RCC 1:1.5:3 mix using 20mm ISS HBG metal including cost & conveyance of all materials to work site and including cost of cement which will be supplied and departmental section store attend the cost will be record from contractors bill at the rate of specifi

Supply and fabrication of steel as per IS432/1960 (Tested Quality) including fabrication charges for all RCC items schedule in the tender including cost of steel which will be supplied by the department section store and the cost will be recovered

Supplying and erecting of centering of RCC items including cost & conveyance of all materials to site and all labour charges etc., complete.

Up to Basement

Column

Above basement

Special ceiling Plastering with cm CM 1:3 10 mm thick including cost and conveyance and all labour charges etc., Complete

Plastering with cement mortar 1:5 12mm thick including cost & conveyance of all materials to work site including cement which will be supplied by the department from the departmental section store and the cost for the same will be recovered from the contr

Paving the floor with scratch proof ceramic tiles of size 305x305x6mm including cost and coveyance of all materials etc., complete.

Providing granolitic floor finishing with C.C1:2:4 using 10-12 mm chips including cost and convyance etc complete

Weathering coarse with brickjelly concrete using 20mm size using slaked lime 32:12.5 ratio including cost and convyance etc., Complete

Finishing the top of roof with one coarse pressed tiles 20x20x2cm size laid in CM 1:3 12 mm thick and pointing with 1:3 mix using water proof compound including all labour charges etc

Supplying and fixing of cuddappah slabs including cost of all materials and labour etc., complele

Painting two coats of newly plastered wall surface with ready mixed distemper paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putt

Painting two coats with best approved Black oxide paint two coats for new black boards including cost and convyance etc complete

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putt

Painting two coats with best approved synthetic enmal paint two coats including cost and convyance etc complete

Supplyind and Fixing of New Steel Door Size (1.2 x 2.10)

Supplyind and Fixing of New Steel Window Size (1.2 x 1.30)

Fixing charges of doors

Fixing charges of windows

Part B - Electrical Arrangements

Supply and run of 2 of 4 sqmm (56/0.30) polythene insulated and PVC unsheeted Sc Alu cable of 1100 V on 7/20 GI Bearer wire for service connection with necessary angle iron upright and end supports for mains SD 65

Supply run of 2 of 4 sqmm (56/0.3) PVC insulated Sc Unsheathed Cu conductor of 1100 V grade in 25 mm dia GI pipe suitably bent at both ends with necessary angle iron upright and end supports for main SD 70

Supply and fixing of TNEB meter board 32 Asingle Phase service connection 3 Nos 32 A fuse unit 500 V SD 125

Wiring with 2*1.5 mm (22/0.3) PVC insulated unsheated Sc Cu conductor of 1100 V Grade in suitable PVC ridged pipe on wall and ceiling with PVC accessories with tw switch box inflush with wall covered hylum sheet of 3 mm thick with painting of suitable colour for open PVC light point and fan point ( for electronic regulator) SD 22

Wiring with 2 x 1.5 sqmm PVC unsheated Sc alu cable of 1100 V Grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113 mm T.W Switch box in flush with wall covered with nylon sheet of 3mm thick 5 Amp 3 pin for open PVC plug point SD 139

Supply and fixing fancy glass shade and 11 V CFL for BH point SD 80

Supply and fixing of single box type 4'40 W flu fitting complete with tube copper choke and condensor with conduit pipe suspension from the ceiling with PVC unsheated leads from terminals to the fitting SD 88

Supply and fixing of Ceiling fan SD 106