PROVN OF PARKING SHED FOR 07 VEHICLES, FALSE CEILING AND TILES AT CONFERENCE HALL AND ADDN ALTN TO MES COMPLAIN CELL UNDER GE (SOUTH) JAIPUR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed.

M&L for vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over & including 15mm thick screed bed in CM (1:6) finished complete all as specified and directed.

M&L for vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished area of each tiles not exceeding 0.36 sqm in vertical surface such as dado / skirting / risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and including rendering 10 mm thick in cm 1:4 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick on vertical surface such as dado / skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortar 1:4 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment.

M&L for non skid ceramic coloured tiles of design as approved 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

M&L for granite of any type tiles 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed including 15 mm thick bedding in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for granite of any type tiles 20 mm thick machine cut in skirting / dado laid over cement screed, and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 12mm thick rendering in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for Machine cut kota stone slab flooring mirror finished 20-25 mm thick (each slab not less than 0.25 sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing & including 15mm thick screed bed in CM (1:6) finished complete all as specified and directed.

M&L for Machine cut kota stone in riser of steps, skirting, dado and pillar mirror finished 20-25 mm thick over cement base rendering laid and jointed with grey cement slurry mixed with pigment to match the shade including rubbing and polishing and rendering 10 mm thick in cm 1:4 complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness, laid dry or laid dry and pointed in any mortor in floor, apron etc complete all as specified and as directed

S&F for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as directed.

M&L for sand filling under floor or in foundations including watering and consolidation complete all as specified and as directed

Ditto- all as per ser item No 11.00 above but except tiles complete all as specified and as directed.

M&L for 100 mm thick cement concrete 1:4:8, type D-2,(using 40 mm graded stone aggregate) as in Sub base / path / flooring complete all as specified and as directed.

Demolition of cement concrete un reinforced in ground floor and paving n exc 15 cm thick (below or above ground level) complete all as specified and directed.

S&F in repair 5 mm thick prelam PVC Wall Lining consisting of desired size stuck on inner framework of 50mm wide strips of 5 mm prelam PVC sheet The pannel & strips shall density of 600 Kg/Cbm complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M&L for brick work using old size sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L Brickwork with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and as directed.

Taking down cement plaster any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L for rendering 10 mm thick in CM 1:6 on fair faces of brick or concrete surface of wall and finished even and smooth with out using extra cement complete all as specified and directed.

M&L for rendering on fair faces of brick work or concrete surface of wall 15 mm thick in CM 1:4 and to be finished even and smooth with out using extra cement complete all as specified and as directed

M&L for rendering 5 mm thick in CM 1:3 on RCC ceiling surface and finished even and smooth with out using extra cement complete all as specified and directed .

M&L for preparation of newly plastered surfaces of wall and applying two coats of exterior emulsion paint by mechanical means over a coat of primer including 1 mm of cement base wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment of old plastered surfaces walls and Washing, rubbing down and stopping of painted surfaces and applying two coats of exterior emulsion paint by mechanical means over a coat of primer including 1 mm of cement base wall care putty complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls of any description and applying 1 mm thick of wall putty and applying two coats of oil bound distemper complete all as specified and directed.

M&L for two coat of oil bound distemper on wall surface over one coat of alkali resisting priming over and including 1 mm thick wall care putty including preparation of newly plaster surface complete all as specified and directed.

M&L for preparation of old distempered / decorated surfaces of ceiling including washing, rubbing down and stopping holes, trading oil and greasy spots and applying two coats of oil bound distemper complete all as specified and directed.

M&L for preparation of old painted surfaces of ceiling including washing, rubbing down and stopping holes, trading oil and greasy spots and applying two coat of Oil bound Distemper after application of 01 mm thick wall care putty complete as specified and directed.

M&L for PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid(size 605x605 mm ) made of GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900 mm centre to cetre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to cenre as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) and removing from site complete all as specified and directed.

M&L Powder Coating (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

S&F Powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. Note:- Quoted rate shall be deemed to included 4 mm thick Tinted glass.

S&F Powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, fixed/ sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed. Note:- Quoted rate shall be deemed to included 4 mm thick Tinted glass.

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S&F for mild steel body mortice lock 4 levers vertical type complete all as specified and directed.

Demolition of PCC in roof covering, kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing treatment of any type complete all as specified and directed.

M&L for surface preparation by removal of all loose particle to ensure clean, smooth and dry surface and laying 25mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate finished even & smooth without using extra cement to cover negative slope into prop with and including WPC @ 3% weight of cement complete all as specified and directed.

M&L for fibre reinforced, UV resistant elastomeric liquid applied water proofing coating over cementitious surfacesw, highly elastic and hairline crack bridging capacity (elongation 250-350%), non toxic, VOC compliant water based coated in three layers, first being priming coat, forming complete thickness as mentioned by OEM complete all as specified and directed. Make : Asian / Berger / Sika.

S&F in repair aluminium partition fabricated with aluminium powder coated (minimum thickness of powder coating 50 micron) section for side & top rail of size 101 mm x 44 mm x 2.5mm (section 20102) for middle rail (horizontal / vertical) of size 101 mm x 44 mm x 2.5 mm (section No 20057), partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including glazing clip, rubber bead, fixed in position as standard practice complete all as specified and directed. Note:- Section No given above are of make Jindal, Contractor may use similar section of Make Hindalco / Nalco as approved

S&F for 35 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both side fixed with approved adhessive incl lipping all round the edges of door as per manufacturers instruction complete all as specified and directed.

M&L for decorative laminate type 1, 0.9 mm thick colour and pattern as approved fixed as in door shutters complete all as specified and directed.

S&F for 35mm thick partly gauzed and partly panelled skeleton door shutters open rebated of second class hard wood rail and styles, prepared to receive glass/gauge etc without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 complete all as specified and directed. Note :- S & F Glass/gauge shall be measured and paid separately.

S&F for stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed to wodden door shutters complete all as specified and directed.

S&F for 250 mm Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F for solid PVC door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet reinforced with MS square tube, and edges will be painted to match with prelam sheet supplying and fixing in opening as per specification & sketch shown under section 8 of SSR Part II complete all as specified and directed.

S&F for factory made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded prelam PVC Sheet on the front face & 2mm prelam PVC sheet on back face,fixing to frame complete all as specified and directed.

S&F for 200mm Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for 100mm size butt hinges medium weight, cold rolled mild steel, and fixed complete all as specified and directed.

S&F for 150 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F for 25mm thick flush shutters for cup board solid core construction, with block board core and plywood face panel on both side covered with decorative face veneers. Exposed edges of shutter to be provided with 6mm thick teak wood lipping. The thickness of lipping shall be 12mm for sides on which hinges are to be provided complete all as specified and directed.

S&F for 18/19 mm thick both side pre laminated particle board (medium density) conforming to IS-3087 commercial type fixed to aluminium frame / shelf complete all as specified and directed.

S&F for Locks , cupboard grade 1 size 65mm of 2 levers made of brass etc complete all as specified and directed.

S&F for 'L' or 180 degree or 110 degree hinges of extruded brass body fixed with cadmium coated screws of size 75 mm complete all as specified and directed.

S&F for 75mm size bright finished brass handle of approved shape & design fixed with cadmium coated screws on the drawer/cupboard/kitchen cabint drawers complete all as specified and directed.

S&F for magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud as per approved sample complete all as specified and directed.

S&F for 75 mm Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for mild steel Hasp & staple safety type stove enameled black including bolt to hinge plate and fixed with screws 75 mm in size complete all as specified and directed.

S&F for venetion blind (curtain) 100 mm wide fabric strip vertical type, top hung sliding in aluminium powder coated channel and fixed as per manufactures instructions complete all as specified and directed.

S&F for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St -240 complete all as specified and directed.

S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for preparation of new or previously untreated steel surface of any description, not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over one coat red oxide primer complete all as specified and directed.

Taking down GI tubing 15mm dia, with connections complete all as specified and directed.

Taking down GI tubing 20mm dia, with connections complete all as specified and directed.

Supply & Fixing CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings and fixed complete to walls & ceiling or laid in floors or concealed in walls etc of size of tubing outer dia 16 mm bore complete all as specified and directed.

All as per item No. 66 above, but size of tubing outer dia 20 mm bore.

S&F in repair bib taps 15mm bore cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed.

S&F in repair bib taps 15mm bore 2-in-1 cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed.

S & F in repair 15 mm dia Angle valve, cast copper alloy chromium plated , screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions & fixed complete all as specified and directed.

S&F in repair Single Piece-WC with soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings, including P/S trap all as specified and directed . Make : Jaquar - Cat Part No -LYS-WHT-38851S300UFSMN , Make: Hindware - Cat Part No : 92565(S-22) , Make: Cera,Cat Part No : S1013123 .

S&F brass CP health faucet 1.2m chain complete all as specified and directed. .

S&F brass CP toilet paper holder with flap complete all as specified and directed.

Supply and fix in repair white vitreous china table top basin of size 435 mm x 700 mm x 135 mm fixed in position as per manufacturer instruction and connecting to drain pipe complete all as specified.

Supply and fix in repair brass chromium plated single lever basin mixer fixed in position as per manufacturer instruction and connecting to drain pipe for 15 mm dia complete all as specified.

S&F Soap dish Holder including fixing to wall complete all as specified.

S&F stainless single towel rail 600 mm long complete all as specified.

S&F Bottle Trap of mild steel of 32 mm Size with all Connection complete all as specified and directed.

S&F vitreous china bowl urinal of size 465x355x265 mm (minimum) white colour with grating and union for discharge pipe incl providing and fixing plug bedding urinal against wall in CM 1:2 securing urinal to plugs with and incl 60mm long brass screws and providing and fixing suitable urinal spreader and pointing around urinal back in cement complete all as specified and directed.

S&F brass chromium plated Urinal valve auto closing system with built in control cock & wall flange complete all as specified.

S & F Curved shaped urinal partition with frosted glass 10mm thick finished in Chrome holder height 950 mm and width 450 mm.

M&L for sand filling in floors or paving laid in layers n.exc 15 cm thick, spread, leveled and rammed including watering & well ramming complete all as directed .

M&L for hardcore of broken stone or boulder gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick watered and rammed to true surface complete all as specified and directed.

S & F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair 75 mm dia cast iron nahani trap complete all as specified and directed.

S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to wall ( Joining to be done with solvent cement ) including PVC brackets complete all as specified and directed.

M & L for precast RCC soakage well (700- 750 mm dia & 40 mm thick wall 250 mm height each) upto 8 m effective depth including excavation in any type of soil as per manufacturer instruction complete all as specified and directed.

Dismantling of 100/75 mm dia cast iron / PVC Pipe or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, complete all as specified and directed.

S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor ( Joining to be done with solvent cement ) complete all as specified and directed.

M & L for Concrete bed in PCC 1:3;6 type C2 for 110 mm bore drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floor ( Joining to be done with solvent cement ) all as specified and directed.

S&F in repair for 75 mm dia PVC (SWR) bends any radius all as specified and directed.

S&F in repair for 110 mm dia PVC (SWR) bends any radius all as specified and directed.

M&L for Providing 35 mm thick precast cement concrete louvers and jallies including precast vertical column as per specified of mix 1:2:4, type B0, using 12.50 mm graded stone aggregate, set in CM 1:4 complete all as specified and directed.

M&L rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete drilled for fixing of steel sheeting or other covering , Doors,etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel, sheeting or other covering , running rails and guides) and hanging ; also fastening and fixing complete all as specified and directed.

S&F mild steel framed work such as grills, gratings, etc., with ends of bar shoulder and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks with Angle, MS sheet Flat iron & similar work conforming to Fe 290 GDE -E-165 , framed and hung as in gates incl pintol hinges , stops, hand made sliding bolts etc and for ornamental and intricate design all as specified and directed.

Excavating in post holes ( or similar holes ) each n exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layer not execeeding 25 cm in soft/loose soil all as specified and directed

M&L for cement concrete 1:3:6 Type C-2 (40mm graded stone aggregate ) in mass concrete sub base for floor complete all as specified and directed.

S&F rolled mild steel for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment con forming Fe 410 -W (Gde- E- 250) quality- A and incl necessary welding as per site requrement complete all as specified and directed.

M&L for mild Steel screw bolts machine made with hexagonal or square heads at one end and screwed the other both end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and dia of shank 11 to 15mm complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft/loose soil complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in Cement concrete in foundations, filling and mass concrete complete all as specified and directed.

M&L providing pre cast cement concrete block or slab 150mm thick 1:2:4 type B1 using 20mm graded stone aggregate with plain or inter locking joints as directed set in CM 1:6. kerbing/edge block to hard standing/footpath including necessary earth work complete all as specified and directed.

S&F for 3.0 mm thick sheet glass ordinary quality and glazing with oil putty nexc 0.5 Sqm each pane complete all as specified and directed.

M&L for preparation of old steel surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new or prevously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel over a coat of pink primer complete all as specified and directed.

S&F Aluminium tower bolt of extruded section, 150mm length of bolt and fixed with screws complete all as specified and directed.

S & F SS mortice lock with handle 150 mm complete all as specified and directed.

S&F butt hinges extruded brass with galvanised mild steel hinge pin bright polished and fixed of size 100mm complete all as specified and directed.

S&F Aluminium body ( extruded section ) Door closer hydraulically regulated, designation No. 3 , universal type , suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed.

Taking down carefully surface aluminium or copper point wiring with PVC casing or conduit (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, regulators, sockets, light fittings etc and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. Note- seviceable tube light fitting will be reused as refixing under respective item of the schedule

Taking down and dismantaling Ceiling fan including accessories of any type or make,safely and refixing after oiling, greasing and servicing in serviceable condition duly painted by synthetic enamel paint of in white/off white colour complete all as specified and directed including writing MES nos. complete all as specified and directed.

Taking down and dismantaling exhaust fan including connected accessories of any type or make,safely and refixing after oiling, greasing and servicing in serviceable condition duly painted by synthetic enamel paint of in greyish/smoky greyish in colour complete all as specified and directed including writing MES nos. complete all as specified and directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green), concealed in wall, drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and terminated in modular metal flush boxes for mounting switches, sockets, fan regulator as required for one light point controlled by one switch complete all as specified and directed.

All as per item No. 115 here-in-before but one fan point controlled by one switch complete all as specified and directed.

All as per item No. 115 here-in-before but one Exh fan point controlled by one switch complete all as specified and directed.

All as per item No. 115 here-in-before but One socket outlet 6 amp controlled by one switch on indepdendent board complete all as specified and directed.

All as per item No. 115 here-in-before but One bell point controlled by one bell push button.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 4.0 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 4.0 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and terminated in modular metal flush boxes with modular white cover plate with frame for one socket point 16 Amps controlled by one switch on indepdendent board complete all as specified and directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 1.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and terminated in modular sunken boxes for mounting switxhes, sockets, as required One socket outlet 6 amp controlled by one switch on the same board with other switches complete all as specified and directed.

Note for item 115 to 121 : (a) The cost of Modular Metal flush box & modular cover plate colour and size as required at site and cutting chases in stone masonary and making good disturbed surfaces using CM 1:3 shall deemed to be included in quoted rate and the make of modular plate shall be of the same brand as per Switch/Socket accessories

(b) Modular switch/socket accessories shall be measured & paid separately in respective item

S&F angle holder 6A, 240V insulated polycarbonate body with back plate complete

S&F switch modular 1 way 6 Amps, 230 volts, 1 module complete all as specified and directed.

S&F modular socket 6 Amps, 2/3pin combined 2 module AC 230 volts complete all as specified and directed.

S&F modular switch 1 way 16/20 Amps, 230 volts, 1 module complete all as specified and directed.

S&F modular socket 6/16 Amps, 2/3pin combined 2 module AC 230 volts complete all as specified and directed.

S&F modular fan regulator 120 watts, 2-module AC 230 Volts complete all as specified and directed.

S&F Modular bell push 6A 1 module complete all as specified and directed.

S&F musical bell, AC, 230 volts, single pole complete all as specified and directed.

S&F ceiling rose 3 pin(phase,neutral and earth polycarbonate body complete all as specified and directed.

M&L for submain wiring alongwith earth continuity conductor with PVC insulated FRLS multistranded copper cable of size 2 x 6 sqmm drawing into and including rigid non metallic PVC conduit concealed in wall, medium grade not less than 20mm dia ISI marked ivory colour with all conduit fitting and fixing accessories and 6 sqmm FRLS multistranded copper conductor cable as continuous earth wire complete all as specified and directed. (Note1 :- 2 runs of 6 sqmm copper wire and 1 run of 6 sqmm copper earth wire alongwith PVC conduit shall be measured as 1 unit. Note2- Rate of Cutting chasing of exixting wall and making good of disturbed surface for concealed conduit shall be included in this item.

S&F 20 amp, 240 volt single pole and neutral enclosure with two pin and earth plug socket, metal enclosed plug top in power coated CRCA steel sheet enclosure recess mounted with chained metal cover for socket outlet with and including one number single pole 'C' series MCB 20 amp as required.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm burried directly in ground (earth pit not less than 2.25 meters deep below normal ground level ), with top edge of the plate not less than 1.5 mtrs below normal ground level , connected to and including galvanised earth strip 25X 4 mm by means of galvanised iron bolts , nut and washers and connected to other end to main panel board duly protected by galvanised iron pipe 32 mm dia " light grade " earth plate surrounded by packed layer of coal dust and common salt 15 cm thick all around bottom and top watering pipe 20 mm bore of galvanised iron " medium grade " with funnel all as shown on electrical plate No 3 of SSR part -I and connecting to earthing testing on completion including cast iron cover frame and PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in earthing pit with cast iron cover and frame including necessary earth work etc complete all as per specified and directed. Note : PCC Chammer shall be constructed atleast 1.5 mtrs away form the earth electrode of the earth pit and pipe for watering shall be provided in slanting manner).

S&F in replcement MCB distribution board, powder coated, TPN , 415 volts, 4 ways,CRCA steel sheet, degree of protection IP 43 - IK 09 with reversible double door, recess mounted, having insulated 200 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required complete all as per specified and directed.

S&F MCBs of 'B' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of Single pole 6 to 32 amp complete all as specified and directed.

S&F MCBs of 'C' series having breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs of Double pole 10 to 32 amp complete all as specified and directed.

S&F MCB, rated current 40 amp, rated residual current 30 mA, rated voltage -415 V AC (3P+N) complete all as per specified and directed.

S&F LED 20 watt tube light Fixtures with extruded polycarbonate, environmental friendly, slim design with decorative and caps, high performance diffuser for soft & glare free light, minimum lumen output 1900 lm with efficacy 110 lm/w. Driver with high voltage protection upto 380 VAC & surge protection upto 2.5 KV, CCT(K)-6500, LM 80 tested high brightness LED technology complete all as per specified and directed.

S&F LED 25 watt street light smartbrite aluminium PDC housing with IK 07 protection PC glossy diffuser duly prewired connection having a nominal system lumen output of efficiency 100 lumens/ watt light watt and total power consumption not more than 25 watt including driver. It has a rated IP 66 with 5 KV inbuilt surge protectione complete all as per specified and directed.

S&F 10 watt LED T -lamp B-22 base (warm white/golden yellow) 1000 lumens complete all as specified and directed.

S&F PVC fresh air fan 250 mm sweep,230 V with louvers, fan motor and accessories including making connections complete all as specified and directed.

S&F ceiling fan 1200 mm sweep 50 Hz AC 230 volts, BEE 5 star rated in white colour with fan motor, blade set , 0.45 meter down rod, canopy complete all as per specified and directed.

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as per specified and directed.

Refixing only serviceable tube light fitting as obtained from item No112 complete with all acessories internally pre-wired and including connection up with with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

M&L for supplying, laying, connecting and testing in trenches, under floors/ roads or on walls cable XLPE insulated screened PVC bedded galvanized steel strips or wire armored, electric power cables (heavy duty) ISI marked with stranded aluminium conductor, 1100 volts grade, of size 16 Sqmm 4 core complete all as specified and directed.

Excavation in trenches n.exc 1.5metre wide and n.exc 1.5 metre in depth for foundation etc or for laying of cable etc and getting out in soft/loose soil.

M&L for sand cushioning to PVC under ground cable with screened and washed sand and punning to provide a required cover complete all as specified and directed. Note- Punned thickness of sand shall be measured and paid for sand used in the cushioning to cable complete all as specified and directed.

M&L for bricks for protection cover to under ground cable (with old size sub class ‘B’ bricks) with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent brick not exceeding 10 mm complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in depth.

Removing of excavated material (soil) to a distance n.exc 50 metre and depositing where directed at a level n.exc 1.50 metre above the starting point complete all as specified and directed.

PUSHPA G ENTERPRISES (BID ID -3165542)

JAGDAMBA CONSTRUCTION COMPANY (BID ID -3164042)