REPAIR/ RENEWAL/ REPLACEMENT OF ELECTRIC FITTING/ FIXTURES AND OTHER INTERNAL ELECTRIFICATION WORKS AT JUTOGH, SANJAULI, KUFRI, CHAIL AND KELVIN GROVE UNDER GE (I) JUTOGH

Taking down carefully copper/ aluminum point wiring (light, fan socket or power) complete including (fitting such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc.), removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc, complete all as specified and directed.

M&L for point wiring 1.5 Sqmm (nominal cross sectional area) with colour coding multistranded copper conductor cable, PVC insulated (FRLS-H) and unsheathed cable and including drawn through PVC casing-N-capping size of 25x32 mm wiring with all fittings and accessories, terminated to PVC box suitable size for housing/mounting the switches/sockets including 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable earth wire connected to common earth dolly for one light/fan point control by one, one way switch complete all as specified and directed.

All as per Srl item No 02.00 above but for one Bell / Buzzer point controlled by one push switch on independent board, complete all as specified and directed.

All as per Srl item No 02.00 above but for two way swithces, complete all as specified and directed.

All as per Srl item No 02.00 above but for one 3 pin socket oulet 5 amps, on same board with other switches, complete all as specified and directed.

All as per Srl item No 02.00 above but for one 3 pin socket oulet 5 amps, on independent board, complete all as specified and directed.

All as per Srl item No 02.00 above but for one 3 pin 15 Amps power point on independent board with 2.5 Sqmm, complete all as specified and directed

S&F switch piano flush single pole, one way 5 Amp ( ISI marked) complete all as specified and directed.

S&F Bell push, flush type, 5 amp ( ISI marked) complete all as specified and directed.

S&F switch piano flush single pole, two way 5 Amp ( ISI marked) complete all as specified and directed.

S&F socket (ISI Marked) 2 in 1, 3 pin 5/6 amps flush type complete all as specified and directed.

S & F switch piano flush single pole, one way 15 Amp ( ISI marked) complete all as specified and directed.

S & F socket 2 in 1, 5 pin 5 and 15 amps (ISI marked) flush type universal complete all as specified and directed.

S&F in repair PVC conduit of 50mm dia complete all as specified and directed.

S & F in repair PVC conduit of 25mm dia complete all as specified and directed.

S & F in repair rigid PVC trunking suitable for Elect cable, wires, Telephone cable, LAN and CCTV cable, certified by CE/ FR complete all as specified and directed.

S & F in repair PVC casing capping of 25mm (1") width complete all as specified and directed.

S & F ceiling rose, 3 phase, PVC polycarbonate, insulated body (ISI Marked) complete all as specified and directed.

S & F in repair buzzer, ding dong bell AC 230 volts single pole complete all as specified and directed.

S&F lamp holder (Angle) PVC/Polycarbonate type with back plate suitable for batten fittings including LED bulb 14 watt, complete all as specified and directed.

S&F LED battern T-8 suitable for LED tube light 18/20 watt, (4 Feet) integrated electronic driver, single end connection complete including electrical connection with existing batten and connect from ceiling rose to fittings and including taking down existing fittings and all complete all as specified and directed.

S&F LED tube light without batten, suitable for T-8 tube light fitting 1x 17/20watt, (4 Feet) integrated electronic driver, single end connection complete including electrical connection with existing batten and connect from ceiling rose to fittings and including taking down existing fittings, complete all as specified and directed.

S&F LED tube light along with fixture, 1x 18 watt, (4 Feet) wall mounted LED battern, integrated electronic driver with heat sink provided for efficient heat dissipation, optics diffussed, complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed.

S&F LED tube light along with fixture, 1x10 watt, (2 Feet) wall mounted LED battern, extrudedd PVC, heat sink provided for efficient heat dissipation & integrated electronic driver, optics diffussed, complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed.

S&F LED light fitting with high out put diffuser 1X5 watt (1 Feet) 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete and including taking down old unsv existing fittings complete all as specified and directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete and including taking down old unsv existing fittings complete all as specified and directed.

S&F in replacement 36W LED(4 x 1) surface /Recess mounting luminaire suitable for hanging on any surface including connecting twin core cable up to nearest point complete with separate electronic driver & high brightness LEDs white colour complete all as specifed and directed.

S&F in replacement 36/40W LED (Size 2'x2') square shaped Recess mounting type luminaire having white polycarbonate body & Aluminium heat shink with PMMA diffuser, 5700K including connecting three core copper cable up to ceiling rose complete with separate electronic driver & high brightness LEDs white colour complete all as specified and directed.

S&F in replacement square / round type recessed mounting LED luminaire 18/20 Watt including making arrangment in ceiling as per the size of fittings and connecting twin core cable up to nearest point complete with Inbuit/separate electronic driver & high brightness LEDs Natural white colour complete all as specifed and directed.

S&F LED spike light in powder coated cast aluminium body & IP 66 protection 5 watt warm white 220 V AC including connecting up with three core flexible copper conductor cable of suitable size complete and including taking down old unsv existing fittings complete all as specified and directed.

S&F in replacement post top lantern new gerneration LED luminaire 25 Watt including making arrangment in pole dia 76mm, size of fittings and connecting twin core cable up to nearest point complete with Inbuit/separate electronic driver & high brightness power LEDs Natural white colour complete all as specifed and directed.

S&F LED flood/focus light in die cast powder coated aluminium body & IP 66 protection 180 watt 220 V AC including connecting up with three core flexible copper conductor cable of suitable size complete and including taking down old unsv existing fittings complete all as specified and directed.

S&F in replacement LED step light in white powder coated cast aluminium body & IP 54 protection 9 watt warm white 220 V AC including connecting up with three core flexible copper conductor cable of suitable size complete and including taking down old unsv existing fittings complete all as specified and directed.

S&F LED Bulkhead luminaire 10W Decorative type as per sample complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings complete all as specified and directed.

S&F LED building securtiy light 25 watt fixed on wall suitable bracket with all connected accessories complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings and all fixing arrangements complete all as specified and directed.

S&F for LED die cast aluminium housing opal white PC diffuser IP 65 with in built LED Bollard light for staircase complete all as specified and directed.

M&L for submain wiring with 2 x 6 Sqmm + 1 x 6 Sqmm Earth Wire single core PVC insulated FRLS-H PVC sheathed cooper cable connecting to common earth dolly in and including heavy duty PVC Concealed Conduit as per site requirement and direction by EIC, with all accessories complete including taking down to old u/s all as specified and directed. Note: Three runs of copper wire for phase, neutral, earth & one run PVC conduit/ casing shall be measured one unit length.

All as per Srl Item No. 37.00 above but for 2 run of single core 4 Sqmm FRLS-H PVC insulated unsheathed multistranded copper conductor cable and one run of 4.0 Sqmm FRLS-H PVC insulated unsheathed multistranded copper conductor earth wire complete.

S&F VTPN MCCB distribution board 4 way fabricated out of thick high quality CRCA sheet, DBs shall be totally enclosed, suitable for 240V/415V, having polyurethane (PU) foam gasket to ensure IP-54 degree of protection for indoor application as per IEC 61439-3:2012 (CI. 10.3)/IEC 60529. DB shall be robust with tested for impact resistance IK09as per IEC 61439-3:2012(CI.No. 10.2.6). DBs shall be provided with prefitted cement Guard. DB Door shall have detachable gland plates provided with proper knockout holes of 26mm/35mm diameter for insertion of cable /conduits. Distribution boards shall be provided with wire set of copper along with the insulated fork type bus bars. DB shall have reversible hinged doors and possibility to allow door opening from left to right or right to left for convenience on site. DB shall have type test reports as per IEC 61439-3 from ERDA or NABL laboratery complete all as specified and directed.

S&F TPN Distribution board 4 way fabricated out of thick high quality CRCA sheet, DBs shall be totally enclosed, suitable for 240V/415V, having polyurethane (PU) foam gasket to ensure IP-54 degree of protection for indoor application as per IEC 61439-3:2012 (CI. 10.3)/IEC 60529.DB shall be robust with tested for impact resistance IK09as per IEC 61439-3:2012 (CI.No. 10.2.6). DBs shall be provided with prefitted cement Guard. DB Door shall have detachable gland plates provided with proper knockout holes of 26mm/35mm diameter for insertion of cable /conduits. Distribution Boards shall be provided with wire set of copper along with the insulated fork type bus bars. DB shall have reversible hinged doors and possibility to allow door opening from left to right or right to left for convenience on site. DB shall have type test reports as per IEC 61439-3 from ERDA or NABL laboratery complete all as specified and directed.

All as per Srl item No 40.00 above but SPN DB 12 way complete all as specified and directed.

All as per Srl item No 40.00 above but SPN DB 8 way complete all as specified and directed.

All as per Srl item No 40.00 above but SPN DB 4/ 6 way complete all as specified and directed.

S&F sheet metal enclosures DB's 2 way, SPN single door suitable for 240 V, complete all as specified and directed.

S&F MCB Single pole 6A Tto 25A rating, 240/415V, having short circuit breaking capacity icn = 10kA, " B" curve characterstics, suitable for resistive & inductive load. MCB shall have true position indicator on the front facia. MCB shall have bi-connect arrangement on top & bottom for simultaneous connection of cable and busbar. MCB shall have line load reversibility. MCB shall have ISI marking with latest type test reports as per IS/IEC 60898/IEC 60947-2 standard complete all as specified and directed.

All as per Srl No 45.00 above but for MCB SPN 40 Amps complete all as specified and directed.

All as per Srl No 45.00 above but for MCB SPN 63 Amps complete all as specified and directed.

S&F MCB TP 415 volt 25 to 63 amps 'B' Curve with 10 kA for inductive load connected through cable lugs of suitable size complete all as specified and directed.

S&F MCB TPN/ FP 415 volts 40 to 100 amp 'B' Curve with 10 kA for inductive load connected through cable lugs of suitable size complete all as specified and directed.

S&F MCCB 3/4 Pole 415 V fixed type 25 to 100 Amps with breaking capacity 16 KA for inductive load connected through cable lugs of suitable size complete all as specified and directed.

All as per Srl Item No 50.00 above but for 125/160 Amps, complete all as specified and directed.

S&F Single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB with 240 volt, 20 amps, including taking out complete all as specified and directed.

S&F MS conduit medium grade 20 mm dia for passing electric wires/ fixing of tube light suspension type including necessary swivel joints and connecting up complete all as specified and as directed including taking out old unserviciable one, complete all as specified and directed.

S&F in repair surge protection device (SPD) Voltage protection level Up upto 1.3 kV, suitable for protection of all terminal equipments both common & differential mode protection, complete all as specified and directed.

S&F exhaust fan made of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 250mm including fixing all arangements, complete all as specified and directed.

S&F AC single phase static energy meter of accuracy class 1.0, 240 V, 50 Hz back light LCD display of rating 10 - 60 Amp, (measures and displays KWH, V, Current I, KW, pf last month history of KWH, MD in KW) with special features like TOD, temper logging, optical communication port display in absence of power with transparent hinge type box made up of GI sheet thickness 3.15mm / sheet metal enclosure, including fixing all arangements complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode, 60x60cmx 6.3mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised strip 32 x 6 by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed.

M&L for PCC 1:2:4, type B-2, using 40mm graded crushed stone aggregate, complete all as specified and directed.

M&L for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate, complete all as specified and directed.

S&F Framed work such as grills, gratings, etc with end bars shouldered and /or riveted, or forged into spikes, frames guard bars, barred iron doors ladders framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290, Gde E-165, complete including painting, complete all as specifed and directed.

M&L for expanded metal cut to length bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete including painting all as specifed and directed. weight not exceeding 4 kg, complete all as specified and directed.

S&F Air termination, single pointed aluminium rod 12mm dia and 300mm long, complete all as specified and directed.

S&F test point terminal block made of GI sheet 75x75x25mm drilled and screwed, complete all as specified and directed.

S&F aluminium strip 25x3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground, complete all as specified and directed.

S&F galvanised iron strip 32x6 mm buried in ground with saddles and fixing screws etc.buried in ground, complete all as specified and directed.

S&F porcelain insulator for fixing of strip with screws etc. burried in roof/ wall / ground, etc., complete all as specified and directed.

Supply, fixing & laying GI tubing light grade 40 mm dia used as protection pipe for earth lead strip in earthing or alongwith pole/ wall/ culvert/ drainge etc for mechanical protection of cable complete all as specified and directed. Note: All required items and accessories, bend, joints, nut and bolts, clamps etc are deemed to be included in quoted rate.

S&F motion sensor switch consisting of sensitiity detector with wide detection field, integrated circuit, having automatism(day & night), covenience, safety, saving energy and practicality functions of power indication and detection indication. Operation on receiving human motion infrared rays on entering the detection field, comprising of following features and specifications as give under |Specification: (a)Power Source: 110 -220VIAC (b) Detection Range: 360° (c)Power Frequency: 50Hz (d) Working Temperature: -20°C~+40°C (e) Ambient Light: 3-2000LUX (adjustable) (Working Humidity), complete all as specified and directed.

Supply and Installation of polycarbonate boxes for single phase meters complete all as specified and directed.

Supply and installation in repair, commissioning and testing Polycarbonate ASTA CPRI approved OEM made Bus Bar P&S DB Indoor type wall Mounting (Mini. Size 600x450x170mm). The DB shall be made of modular POLYCARBONATE THERMOPLASTIC ENCLOSURES shall be UV resistance, anti-acid, anti corrosive and FR material. The manufacturer of panel shall submit a copy of CPRI TEST REPORT IN POLYCARBONATE only also share panel assembled by OEM, channel partner or sister concern assembly will not be accepted. DEGREE OF INGRESS PROTECTION IP 65 IN ACCORDANCE WITH IEC 60529 and the gasket shall be internally embedded made of polyurethane. The Panels made by aprroved enclosures in MES Hensel, Schneider, ABB. & they shall submit a copy of TYPE TEST REPORT of a board made out of Polycarbonate thermoplastic panel as per following. a). 1. In accordance with IEC 60 439-1 (IS8623) at ASTA (CPRI Bhopal Laboratory) and IEC 61 439-2 for power switchgear and controlgear assembly. The type test report as per CPRI (in accordance with IEC 60 439-1) complete all as specified and directed and should consist with following: i) Degree of protection of system ii) Temperature Rise Limit iii) Dielectric Properties iv) Short Circuit Withstand Strength v) Effectiveness of protective circuit vi) Clearance and creepage distance vii) Mechanical Operation

S&F digital type fuel indicator for fuel tank complete all as specified and directed.