palika prangad me marmmat kary

S&L of G.S.B. & Stone ballast all complete. As Directed by EIC Anlysis

12 mm cement plaster with cement plaster with cement mortar in proportaion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level includinh

Providing and laying cement concrete in 1:2:4 ( 1 cement :2 coarse sand:4 graded stone aggretae 20 mm nominal size) and curing complete.

dismatling interloking tiles work in floors/roads laid in dry sand including stacking with 50m lead for thickness of tiles 60 mm to 80mm

laying old cement concrete interloking paver blocks of any design/shape laid in required line lelevl curvature colour and pattern over and including 50 mm thick compctaed

dismalting old plaster or skirting raking out joints and cleaning the surface for plaster

constructing of masonary chamber brick work with common burunt clay.F.P.S. (non modular) brick of class desiganation 150 in cement

earth work in filling with ordinary soil upto km-5 lead and carted compacted including all charges

class 150 (non modular brick work in 1;4 cement and coarse sand mortar in foundation and plinth including supply

Supply & Laying of 80 mm (Rubber molded) I shaped (Zigzag) precast lnterlocking tiles of thickness 60 to 100mm (Compressive strength not less then 30Mpa and weight 4.50 kg) lncluding 0.30mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work.PWD SOR SI NO. Page no. 56 itom no. 17,20% of item no6

kota stone flooring over 20mm (average ) thick base laid over and jointed with grey cement ..pwd sor ch14 sr no. 12,11.26

ESteel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc, complete. Hot finished welded type tubes PWD SOR CH.10 SL. NO.11 (2023-24)

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. pwd sor ch11 sr. no.3 ,

perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm centre, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes,finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture's specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specificaton and direction of the Engineer in charge but excluding the cost of painting with:

Supply and fixing of recess/ surface/pendent mounting round 10 to15 Watt LED Down Lighter having powder coated die cast aluminium, housing with heat sink, diffuser/Reflector and driver set complete in all respect. SI. No1402 CAT-A dsr

Add 18% GST

Please Enable Macros to View BoQ information